Typing can be very laggy when remote into other computers via OpenSSH from M1 Mac Book Air.
Both builtin Teminal.app and iTerm2 behave the same.
Usually it starts fine, but quickly becomes laggy. This is dangerous and has caused serious problems for me...
Current walkaround that works for me is to execute ssh forcing x84 arch like so
arch -x86_64 /bin/zsh -c "ssh user#server..."
Is this a known issue or just happening to me somehow? Anyone else experiencing this as well? Is there better or more preferred way to fix this?
Thanks.
Related
I wanted to use xquartz when ssh to a server, to see the graphics when drawing a plot. But it won't work when I access to the server (it just don't run when I type ssh -XY xxx#xxx). Could anyone give me some clues?
This problem occurred when I change to new MacBook Pro M1 which using zsh instead of bash.
Thanks in advance.
Ever since I have upgraded my laptop (Click here for hardware specs.) my screen usually freezes. Mostly in chrome or Firefox browser. I am pretty sure this is a Nvidia driver problem but I can't seem to find the solution. I am running a Nvidia Quadro K2100M.
I am currently running Nvidia 361.42. I have tried using open source Xorg server without any luck.
The only solution I have found so far is forcefully turning off the computer by holding down the power button.
Things that I have tried:
I got keyboard input
I cannot switch to another terminal to restart lightdm
This problem came to me occasionally, making me really annoyed.
As illustrated in many blogs, this may be caused by graphic driver problem. For me, my desktop has a NVIDIA video card, you can run lspci | grep VGA to see what type of your video type, in my case, it returned:
02:00.0 VGA compatible controller: NVIDIA Corporation G98 [GeForce 8400 GS Rev. 2] (rev a1)
I followed the instruction on jiakai zhang's blog to reinstall proper drivers for the desktop, hope this will help you.
The key steps in [1] are to reinstall the ubuntu desktop and nvidia drivier by:
$ sudo su
$ apt-get update
$ apt-get install --reinstall ubuntu-desktop
$ apt-get install unity
$ apt-get remove --purge nvidia*
$ reboot
$ sudo apt-get install nvidia-current
$ sudo reboot
Updating the grub settings worked for me! Do the following:
1. Open the GRUB configuration
sudo vi /etc/default/grub
2. Change the value of GRUB_CMDLINE_LINUX_DEFAULT from "quiet splash" to
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash intel_idle.max_cstate=1"
and save the file.
3. Update & Reboot
sudo update-grub
sudo reboot
More info:
This is a bug in the processor, known as the c-state bug. It causes total freezes when the CPU tries to enter an unsupported sleep state. It's a problem for many Bay Trail devices especially with newer (4.*) kernels. There is a simple workaround until it gets properly fixed upstream. You just need to pass a kernel boot parameter and the random freezing stops completely. The parameter may increase battery consumption slightly, but it will give you a usable system. You do this by editing the configuration file for GRUB as described above.
GRUB - boot loader package from the GNU Project, which provides a user the choice to boot one of multiple operating systems
installed on a computer or select a specific kernel configuration available on a particular operating system's partitions;
Intel Bay Trail - new Atom Processors from Intel. Atom is Intel's family of x86 and x86-64 processors that are optimized
for small computing devices, such as smartphones and mobile Internet devices;
C-States - used to optimize optimize or reduce power consumption in idle mode (i. e. when no code is executed) - (C0 to C8)
Reference: here.
I have since fixed this problem by re-installing Ubuntu 16.04 and not switching from the nouveau video driver. I also disable updates and everything been working good for about 2 months now.
Gaming is pretty good but I usually play steam games so doesn't push any kinda hard core graphics
Well, I had the same problem: My PC was freezing randomly. I tried Ubuntu 16, 17 and 18.04 and everything was the same. I tried several drivers and didn't get a solution. I tried several solutions that I found in the forums (including this) and got bad and harmful results.
My solution was: I stopped using the graphical nvidia card, removed it and now I'm using the integrated Intel HD graphics card (Intel® HD Graphics 530 card (Skylake GT2)) and all the problems were solved!
I fixed mine using a few commands from #Qoros solution above. i just ran apt-get update, apt-get install nvidia-current, and sudo reboot. cheers to #Qoros btw!
For me, none of the approaches described in rest of the answers worked.
I was opening multiple terminal tabs running some heavy processes and ubuntu used to freeze when I had 6-7 tabs. I tried monitoring the resources used while I was starting my processes in terminal tabs. You can do it by opening System Monitor app and going to Resources tab.
What I noticed is that when my RAM(8GB) and my swap space(1GB) were completely used up, ubuntu would freeze.
As a solution, I increased my swap space and made it 16GB. After this memory never gets used completely and ubuntu doesn't freeze.
https://askubuntu.com/questions/178712/how-to-increase-swap-space decsibes how to increase swap space.
I use avrdude on osx to do development for an xmega256a3. It's wonderful, it lets me flash my target just fine. However, when I try to use it to program the usersig block, it doesn't work so well. I was initially excited by some early success with it, but found subsequent flashes weren't working.
Through testing, I determined that if my usersig file was for all 0's, it worked fine. But all FF's didn't work. Given what little I know about flash, these leads me to believe that I'm either missing an option or avrdude isn't doing a complete job for what it needs to do here.
The command I'm using is
avrdude -p atxmega256a3 -P usb -c avrispmkii -e -U usersig:w:mySig.hex
Using AVR Studio 4 on a Windows box, I am able to program any of these files to the usersig flash block.
My question boils down to is this possible? if so what option/incantation am I missing? Or am I out of luck for programming usersig for this processor with avrdude?
(I'm using version 5.11.1 from the CrossPack guys)
It turns out that old versions of avrdude indeed did not support this. It requires a page erase of usersig, and that was not supported until version 6, which is due out soon. I've tested with svn builds of it, and with a two line patch submitted to day, it does the job.
I am trying to ssh into a remote Linux server using x11. I found that Mountain Lion no longer supports x11 when I upgraded, so I installed Quartz. However, my terminal commands are not working anymore. Here are two important terminal commands that no longer work for me.
I did a Google search and looked elsewhere on Stack Overflow, but didn't find what I am looking for. Namely, I was hoping there are some new commands that work with Quartz in place of the standard x11 phrases I have been using. I tried these after I installed Quartz on my machine, and it didn't work. I just taught myself these x11 commands on 10.7 when 10.8 just came out. Here are a few examples.
1.
ssh -X username#serverlocation.com
2.
./configure -- this/is/an/example/directory --enable--gdb --with-x -with-x11 --with-term --with-nogui
If anyone could tell me how to get this working with Quartz on Mountain Lion, I would be grateful. Otherwise, I would have to run a VM on my Mac with either Windows and putty in, or try to figure out how to use x11 on my Ubuntu machine.
Have you logged out/in after installing XQuartz? XQuartz is just a distribution of X11 and is completely compatible with what was previously included with the OS X.
Studying vision, I would like to play with the Microsoft Kinect.
Can I use it on my Mac?
I have not found any Library for Mac and fear virtualization on my laptop to use Linux.
I've accessed Kinect data on OSX using openframeworks and the ofxKinect addon (which uses libfreenect and libusb).
It's not the only option, just I've used and worked 'out of the box'.
Try downloading the Zigfu Dev Bundle for mac (http://www.zigfu.com) - that should get you up to speed with kinect development on mac.
Using Kinect on Mac is as easy as ordering Latte.
But there is also a lot of confusion on the Internet and sites that seem to be old and give you the wrong advice such as installing a separate sensor library in addition to OpenNI. Just go to the basic website and download SDK for your MAC:
http://www.openni.org/openni-sdk/
You might need to have prerequsities though I assume you have already installed them, such as:
sudo port install libtool
sudo port install doxygen
restart comp
sudo port install libusb-devel +universal
Troubleshooting:
"sudo rm -f /opt/local/lib/libusb-1.0.0.dylib"
"sudo port clean libusb"
"sudo port install libusb +universal"
No need to compile anything. You should be able to run ./Samples/Bin/SimpleViewer right away after you run sudo ./install.sh.The PROBLEM might be that you have already tried to run it unsuccessfully and put a camera in the wrong state. I have seen errors such as USB intercase cannot be set etc. as a side effect.
Running your code in Eclipse is a different story and may require a few extra steps and changing your Ubuntu code (using openni namespace, different includes, etc.)