Using VBA, I want join a selection of one table to another, based on some conditions. The solution is probably simple, but I just can't find the error. I get a Runtime Error -2147217900 (80040e14) "Syntax-Error in join operation".
SELECT *
FROM [target$] AS Ziel
LEFT JOIN
(
SELECT *
FROM [source$]
WHERE [Zust].[FS] = 3
AND Year([Zust].[DATUM_1A])=2018 as Zust)
ON (
[Ziel].[Lage] = [Zust].[LAGE]
AND ((
[Zust].[BKM] < [Zust].[VKM]
AND [Ziel].[MitteBetrKm] <= [Zust].[VKM]
AND [Ziel].[MitteBetrKm] > [Zust].[BKM])
OR (
[Zust].[BKM] > [Zust].[VKM]
AND [Ziel].[MitteBetrKm] >= [Zust].[VKM]
AND [Ziel].[MitteBetrKm] < [Zust].[BKM])))
WHERE [Ziel].[MitteBetrKm] IS NOT NULL
ORDER BY [Ziel].[VonKm]
Related
I want to compare two different tables in IN statement based on condition.
SELECT DISTINCT
cts.ContactType
,ISNULL(ctl.[Description], CONCAT('Unknown Contact Type: ',cts.ContactType)) AS [Description]
FROM
( SELECT Null AS [ContactType]
WHERE ISNULL(Null, '') <> ''
UNION ALL
SELECT DISTINCT cta.ContactType
FROM
(SELECT u.AccessUserID
FROM v2010_vUsers u
WHERE u.UserID = 'harry_1#cared_t'
UNION ALL
SELECT ur.AccessUserID
FROM v2010_UserRoles ur
WHERE ur.UserID = 'harry_1#cared_t') r --Roles user has
INNER JOIN v2010_UDV_ContactType_AccessMatrix_Full cta --ContactTypes Accessible
ON cta.AccessUserID = r.AccessUserID) cts --ContactTypes Selectable
LEFT JOIN v2010_ListEntries ctl --ContactType List
ON ctl.ListId='CONTACTTYPE' and ctl.Code = cts.ContactType
WHERE cts.ContactType In
(
CASE WHEN (SELECT dbo.f2010_IsFeatureAllowedInTenancy('ContactTypeSC', dbo.f2010_PartnerDivisionID('06b30841-2496-48ef-b91a-21f06a9299f2'))) = '1'
THEN (SELECT Code From v2010_ListEntries WHERE ListId='CONTACTTYPESC')
ELSE (SELECT Code From v2010_ListEntries WHERE ListId='CONTACTTYPE')
END
)
ERROR : Subquery returned more than 1 value. This is not permitted
when the subquery follows =, !=, <, <= , >, >= or when the subquery is
used as an expression.
Error is in following lines:
WHERE cts.ContactType In
(
CASE WHEN (SELECT dbo.f2010_IsFeatureAllowedInTenancy('ContactTypeSC', dbo.f2010_PartnerDivisionID('06b30841-2496-48ef-b91a-21f06a9299f2'))) = '1'
THEN (SELECT Code From v2010_ListEntries WHERE ListId='CONTACTTYPESC')
ELSE (SELECT Code From v2010_ListEntries WHERE ListId='CONTACTTYPE')
END
)
I am not able to use case when in IN statement. if I write WHERE cts.ContactType In (SELECT Code From v2010_ListEntries WHERE ListId='CONTACTTYPESC') it is working but I want to compare condition and based on condition compare table.
It is a bit hard to tell where the multiple rows problem is coming from, but I am thinking:
WHERE (dbo.f2010_IsFeatureAllowedInTenancy('ContactTypeSC', dbo.f2010_PartnerDivisionID('06b30841-2496-48ef-b91a-21f06a9299f2')) = '1' and
cts.ContactType In (SELECT Code From v2010_ListEntries WHERE ListId = 'CONTACTTYPESC')
) OR
(dbo.f2010_IsFeatureAllowedInTenancy('ContactTypeSC', dbo.f2010_PartnerDivisionID('06b30841-2496-48ef-b91a-21f06a9299f2')) <> '1' and
cts.ContactType In (SELECT Code From v2010_ListEntries WHERE ListId = 'CONTACTTYPE'')
)
Or, more simply as:
cts.ContactType In (SELECT le.Code
FROM v2010_ListEntries le CROSS JOIN
(VALUES (CASE WHEN dbo.f2010_IsFeatureAllowedInTenancy('ContactTypeSC', dbo.f2010_PartnerDivisionID('06b30841-2496-48ef-b91a-21f06a9299f2')) THEN 'CONTACTTYPESC' ELSE 'CONTACTTYPESC' END)) v(listId)
WHERE le.ListId = v.ListId
)
I have converted oracle query into below standard bq but in last statement(IN subquery). I am getting error:
"IN subquery is not supported inside join predicate."
Please advise how to use IN subquery in bq in the below code
#Last part of the code
INNER JOIN (
SELECT
DISTINCT `domain-rr.oracle_DB_DB.he_project_assoc`.PARENT_ISBN
PARENT_ISBN,
SUM (`domain-rr.DB_RPT.PROJECT_GR_QTY`.GR_QTY) GR_QTY
FROM
`domain-rr.oracle_DB_DB.he_project_assoc`
INNER JOIN
`domain-rr.DB_RPT.PROJECT_GR_QTY`
ON
`domain-rr.oracle_DB_DB.he_project_assoc`.child_ISBN = `domain-
rr.DB_RPT.PROJECT_GR_QTY`.BIC_GCISBN
AND `domain-rr.oracle_DB_DB.he_project_assoc`.BREAK_LABEL <>
'Associated ISBNs'
GROUP BY
`domain-rr.oracle_DB_DB.he_project_assoc`.PARENT_ISBN) xx
ON
yy.PARENT_ISBN = xx.PARENT_ISBN
AND yy.CIRCULATION_INT < xx.GR_QTY
AND yy.PARENT_ISBN IN
( SELECT
DISTINCT _BIC_GCISBN
FROM
`domain-rr.DB_RPT.BIC_GM_AGCPOAODS00_BO_VW`
INNER JOIN
`domain-rr.oracle_DB_boadmin.fiscal_bo`
ON
_BIC_ZC2GRIRIN = 'G'
AND _BIC_ZCLOEKZ = ' '
AND SUBSTR (BOUND_DATE, 1, 6) = `domain-
rr.oracle_DB_boadmin.fiscal_bo`.PRIOR_FISC_YEAR_MONTH )
Can you try like this:
Select * from (
#Last part of the code
INNER JOIN (
SELECT
DISTINCT `pearson-rr.oracle_grdw_grdw.he_project_assoc`.PARENT_ISBN
PARENT_ISBN,
SUM (`pearson-rr.GRDW_RPT.PROJECT_GR_QTY`.GR_QTY) GR_QTY
FROM
`pearson-rr.oracle_grdw_grdw.he_project_assoc`
INNER JOIN
`pearson-rr.GRDW_RPT.PROJECT_GR_QTY`
ON
`pearson-rr.oracle_grdw_grdw.he_project_assoc`.child_ISBN = `pearson-
rr.GRDW_RPT.PROJECT_GR_QTY`.BIC_GCISBN
AND `pearson-rr.oracle_grdw_grdw.he_project_assoc`.BREAK_LABEL <>
'Associated ISBNs'
GROUP BY
`pearson-rr.oracle_grdw_grdw.he_project_assoc`.PARENT_ISBN) xx
ON
yy.PARENT_ISBN = xx.PARENT_ISBN
AND yy.CIRCULATION_INT < xx.GR_QTY
) AA
where AA.PARENT_ISBN IN
( SELECT
DISTINCT _BIC_GCISBN
FROM
`pearson-rr.GRDW_RPT.BIC_GM_AGCPOAODS00_BO_VW`
INNER JOIN
`pearson-rr.oracle_grdw_boadmin.fiscal_bo`
ON
_BIC_ZC2GRIRIN = 'G'
AND _BIC_ZCLOEKZ = ' '
AND SUBSTR (BOUND_DATE, 1, 6) = `pearson-
rr.oracle_grdw_boadmin.fiscal_bo`.PRIOR_FISC_YEAR_MONTH )
I have 2 queries. One includes a subquery and the other is a pretty basic query. I can't figure out how to combine them to return a table with name, workdate, minutes_inactive, and hoursworked.
I have the code below for what I have tried. The simple query is lines 1,2, and the last 5 lines. I also added a join clause (join punchclock p on p.servrepID = l.repid) to it.
Both these queries ran on their own so this is solely just the problem of combining them.
select
sr.sr_name as liaison, cast(date_created as date) workdate,
(count(date_created) * 4) as minutes_inactive,
(select
sr_name, cast(punchintime as date) as workdate,
round(sum(cast(datediff(minute,punchintime, punchouttime) as real) / 60), 2) as hoursworked,
count(*) as punches
from
(select
sr_name, punchintime = punchdatetime,
punchouttime = isnull((select top 1 pc2.punchdatetime
from punchclock pc2
where pc2.punchdatetime > pc.punchdatetime
and pc.servrepid = pc2.servrepid
and pc2.inout = 0
order by pc2.punchdatetime), getdate())
from
punchclock pc
join
servicereps sr on pc.servrepid = sr.servrepid
where
punchyear >= 2017 and pc.inout = 1
group by
sr_name, cast(punchintime as date)))
from
tbl_liga_popup_log l
join
servicereps sr on sr.servrepID = l.repid
join
punchclock p on p.servrepID = l.repid collate latin1_general_bin
group by
cast(l.date_created as date), sr.sr_name
I get this error:
Msg 102, Level 15, State 1, Line 19
Incorrect syntax near ')'
I keep getting this error but there are more errors if I adjust that part.
I don't know that we'll fix everything here, but there are a few issues with your query.
You have to alias your sub-query (technically a derived table, but whatever)
You have two froms in your outer query.
You have to join to the derived table.
Here's an crude example:
select
<some stuff>
from
(select col1 from table1) t1
inner join t2
on t1.col1 = t2.col2
The large error here is that you are placing queries in the select section (before the from). You can only do this if the query returns a single value. Else, you have to put your query in a parenthesis (you have done this) in the from section, give it an alias, and join it accordingly.
You also seem to be using group bys that are not needed anywhere. I can't see aggregation functions like sum().
My best bet is that you are looking for the following query:
select
sr_name as liaison
,cast(date_created as date) workdate
,count(distinct date_created) * 4 as minutes_inactive
,cast(punchintime as date) as workdate
,round(sum(cast(datediff(minute,punchintime,isnull(pc2_query.punchouttime,getdate())) as real) / 60), 2) as hoursworked
,count(*) as punches
from
punchclock pc
inner join servicereps sr on pc.servrepid = sr.servrepid
cross apply
(
select top 1 pc2.punchdatetime as punchouttime
from punchclock pc2
where pc2.punchdatetime > pc.punchdatetime
and pc.servrepid = pc2.servrepid
and pc2.inout = 0
order by pc2.punchdatetime
)q1
inner join tbl_liga_popup_log l on sr.servrepID = l.repid
where punchyear >= 2017 and pc.inout = 1
For the code below I am attempting to select only the month end values for all unique FundId's. The code below keeps giving me the error of
Msg 164, Level 15, State 1, Line 16
Each GROUP BY expression must contain at least one column that is not an outer reference.
How can I fix the where statement to pull all month end values for each fundid
SELECT TOP 10000 a.[PerformanceId]
,[InvestmentType]
,[EndDate]
,a.[CurrencyId]
,[AssetValue]
,c.FundId
FROM [StatusData_DMWkspaceDB].[dbo].[NetAssetsValidationFailure] a
LEFT JOIN MappingData_GAPortDB.dbo.PerformanceLevelMapping b
ON a.PerformanceId = b.PerformanceId
LEFT JOIN MappingData_GAPortDB.dbo.FundClassMatching c
ON b.SecId = c.SecId
WHERE a.EndDate IN (
SELECT MAX(a.EndDate)
From [StatusData_DMWkspaceDB].[dbo].[NetAssetsValidationFailure]
GROUP BY c.FundId, Month(a.EndDate), YEAR(a.EndDate))
This is your query:
SELECT TOP 10000 navf.[PerformanceId], [InvestmentType], [EndDate],
navf.[CurrencyId], [AssetValue], fcm.FundId
FROM [StatusData_DMWkspaceDB].[dbo].[NetAssetsValidationFailure] navf LEFT JOIN
MappingData_GAPortDB.dbo.PerformanceLevelMapping plm
ON navf.PerformanceId = plm.PerformanceId LEFT JOIN
MappingData_GAPortDB.dbo.FundClassMatching fcm
ON l.m.SecId = fcm.SecId
WHERE navf.EndDate IN (SELECT MAX(navf.EndDate)
From [StatusData_DMWkspaceDB].[dbo].[NetAssetsValidationFailure] navf
GROUP BY fcm.FundId, Month(navf.EndDate), YEAR(navf.EndDate)
);
Learn to use sensible table aliases, so the query is easier to write and to read.
In any case, your WHERE clause is only referencing outer tables in the GROUP BY. The message is quite clear.
I'm not even sure what you want to do, but I am guessing that this is a working version of what you want:
SELECT x.*
FROM (SELECT navf.[PerformanceId], [InvestmentType], [EndDate],
navf.[CurrencyId], [AssetValue], fcm.FundId,
ROW_NUMBER() OVER (PARTITION BY fcm.FundId, Month(navf.EndDate), YEAR(navf.EndDate)
ORDER BY navf.EndDate DESC
) as seqnum
FROM [StatusData_DMWkspaceDB].[dbo].[NetAssetsValidationFailure] navf LEFT JOIN
MappingData_GAPortDB.dbo.PerformanceLevelMapping plm
ON navf.PerformanceId = plm.PerformanceId LEFT JOIN
MappingData_GAPortDB.dbo.FundClassMatching fcm
ON l.m.SecId = fcm.SecId
) x
WHERE seqnum = 1;
I am working on Microsoft SQL Server 2014 and I have the following SQL query which works:
SELECT
h.entidade, h.datadoc, h.tipodoc, h.numdoc,
(SELECT valortotal -
(SELECT COALESCE(SUM(l.valorrec), 0)
FROM LinhasLiq as l
INNER JOIN cabliq ON l.IdCabLiq = CabLiq.id
INNER JOIN Historico ON L.IdHistorico = Historico.id
WHERE cabliq.DataDoc < '01/05/2015'
AND historico.id = h.id)) as 'valor pendente',
coalesce(documentosCCT.Descricao,'')
+' '+ CASE WHEN h.modulo<>'V' THEN coalesce(documentosVenda.Descricao,'') else'' END
+' '+ coalesce(h.descricao,'') AS descricaogeral
FROM
Historico h
LEFT JOIN
documentosCCT ON h.TipoDoc = documentosCCT.Documento
LEFT JOIN
documentosVenda ON h.Tipodoc = documentosVenda.Documento
WHERE
h.entidade = 'ta0141' AND
(h.tipoentidade = 'C' OR h.tipoentidade = 'F')
ORDER BY
datadoc ASC
and this specific expression
(select valortotal - (SELECT COALESCE(SUM(l.valorrec),0) from LinhasLiq as l
inner join cabliq on l.IdCabLiq = CabLiq.id
inner join Historico on L.IdHistorico = Historico.id
where cabliq.DataDoc < '01/05/2015' and historico.id = h.id)) as 'valor pendente'
returns a lot of 0 values, so how can I put this entire expression in a having X > 0 clause, or any other way as long as the rows with this expression = 0 doesn't show?
Many thanks.
i don't know what is your circumstances if it is feasible try to make query in single select statement instead of multiple
Don't make an alias valor pendente like that should be valorpendente
Now you can use CTE
;WITH CTE AS
(
-- YOUR QUERY
)
SELECT * FROM CTE
WHERE valorpendente > 0