I have a WS2812B LED Strip that I'm planning to use in a small arduino project, but while I'm waiting for all the parts I wanted to miss around with the led strip, so is there a way to use the strip and controlling the colors using only a USB cable and a PC with a software without a dedicated controller?
No. USB ports on your PC can only send USB signals, they cannot send the specific protocol that a WS2812B needs.
The PC can't control ws2812b led strip directly,if you want to control ws2812b led strip or sk6812 led strip by PC,you need to add Artnet controller.
Related
I have a juul, a charger, and a pc. The pc has usb ports. Thats clear.
When i plug a mouse, keyboard or any HID device, the pc can recognise these, but when i plug the charger, nothing happened.
I'm try to watch the connected usb devices, with the "USBDeview" by NirSoft. The software cant list the charger.
How can I detect, when any specified stuff connected via usb? Now the "stuff" is the juul charger.
Thanks for any help, I tried to make it simple.
If it's just a charger, it has nothing to do with the USB bus aside from drawing 5V from its power. I.e. it may only have DC power pins (+, -), without the data pins (D+, D-). In which case, your OS won't notice anything was plugged in.
Image from Wikipedia
So I know that for a USB port type A there is 2 ouputs/inputs. I'm working on a simple electronic circuit and I would like to ouput datas on to my computer so a program could work with it. How (without it getting too complicated on the circuit side) can I just choose the output of the USB port and read the input just on the on/off level?
Thanks
What you want is the www.Nusbio.net device.
it is an USB device that give any .NET programming languages access to 8 gpios and also SPI and I2c bus.
USB is more complicated than what you are describing. It sounds like what you really want is a serial port, where you can use the TX and RX lines as your output and input to the PC, or manually control the modem control or GPIO pins. You can still do this with USB via a USB to UART Bridge device.
If you are simply looking to toggle an I/O pin, some of these devices also have general purpose I/O pins for this type of thing. You can set it to low/high from the PC if it is set to be an output and read the I/O value if it is an input.
You can talk to it as a serial device from your computer using normal serial communications such as POSIX method for Linux or OSX or the Commuincations API for Windows. In this case you can also set the flow control to manual and use the RTS/CTS pins as GPIOs.
You cannot directly control the USB inputs and outputs like you want to do. However, there are various solutions that involve connecting a USB device to your computer and sending commands to it that use its inputs and outputs. One such solution is called Firmata.
I have a Korg NanoKey which I'd like to use to control a simple synthesizer I've designed on the Arduino platform. (I have an Arduino Uno.) Basically, I don't care about MIDI, I just want to read what note the keyboard has pressed down, but if MIDI is the only way I can do that, then it's okay with me. So my big question is, how do I do this? I haven't been able to find anyone else on the Internet who has already done this.
But more specifically, I see two challenges: First, I'd like to plug my NanoKey directly into the Arduino's USB port, but then I'm wondering if the Arduino would provide the necessary power to the NanoKey. Second, I'm not sure what protocol I would be reading. Can I just read MIDI signals as described in this tutorial?
I don't want to curb your enthusiasm but what you're attempting might be a bit hard basket. A USB system consists of a host controller and one or more peripheral devices. It's the host that controls traffic flow to the devices which means that devices can't transmit data on the bus without an explicit request from the host controller.
I'm not familiar with either the nanoKey or the Arduino platform but I'd be fairly confident that the nanoKey is a USB "device", normally connected to a computer which would act as the host. So what you would need for this system to work is for the Arduino to act as the host when communicating with the nanoKey. The Arduino schematic shows that the Arduino Uno uses an ATmega8U2 for USB coms. Unfortunately the ATmega8U2 is a USB device, so you've got two peripheral devices but no host controller to facilitate the transfer of data between them. You'd be better off using a development board for a micro that provides either USB Host or USB On-the-Go.
I opened up a Korg Nano controller yesterday and was surprised to discover that there's an AVR mega32 inside. It would be a significant undertaking, but with a bit of work you could probably work out the schematic and reprogram it yourself using their programming header breakout. You might not end up with much more functionality than you've got this other way, but it would be very educational.
I agree with the Jono - you are biting off a lot - it might even end up easiest to hook the keys up to the Arduino directly - tearing out the electronics and figuring out a way to multiplex the keys into a single channel without losing polyphony (resistor 'ladder' maybe). I any case, good luck. Amusingly, you'd making an analog keyboard to plug into a digital synthesizer.
Quick and Dirty Arduino MIDI Over USB demonstrates how to send/receive MIDI out over USB, but unfortunately, this probably isn't any help for what you are trying to do, since he's found a way to send and receive MIDI signals from a USB host, not act as a USB host himself - the opposite of your problem. However, I thought perhaps it would be of use, if you ever wanted to control your device from a computer.
As mentioned in the other posts, you would need to use a separate chip to provide the USB Host interface. Here's a great guide to using the USB Host shield by Circuits#Home to interface with an Akai LPK25 (USB Midi Keyboard).
http://blog.makezine.com/2010/11/30/usbhacking/
The Arduino sketch is provided, so you should be able to try it out, however debugging the USB Host connection could get tricky real fast if it doesn't work out of the box.
I'm looking to control a mains powered light from a simple relay switch connected via USB to the computer.
The relay switch isn't even a USB device, it's just a simple switch that requires the USB voltage to turn it on. When the voltage drops below a threshold, the switch will turn the light off.
My problem is that I can't control the power output of a USB port. I'm happy to do it using any language on Windows or Linux (but preferably Java because I'm used to it).
Unfortunately, in most cases you cannot control the power supply to the USB port. The power supply is usually hardwired through, and not switchable in software. You can send a reset to a USB device, but that won't work in your case.
There are a number of projects on instructables that do similar to what you describe, but unfortunately they seem to either be quite complicated or require expensive parts.
EDIT: There is actually a product currently in the news which would do want you want, but it doesn't appear to be shipping yet: http://www.pwrusb.com/
EDIT (again): Apparently you can do this with some usb hubs. This post sugggests the Linksys USB2HUB4 is one that works.
EDIT (and again): Apparently there are a number of similar questions, but there don't seem to be any more useful answers:
https://stackoverflow.com/questions/405269/custom-usb-device-that-disables-power-to-usb-devices-plugged-into-it
Power off an USB device in software on Windows
Is there software or code to alter USB power output
Can I write a program that swiches USB on/off
Most of the USB to Serial or USB to RS232 $10 converters support hardware handshaking. Use one of those as a single channel digital io.
Connect your transistor that will drive the relay to DTR on the converter board and command DTR ON/OFF with the converters driver.
A 2N7002 is a good transistor to use (FET actually) since it will work from 3V and doesnt need any resistors anywhere.
Here is a complete solution.
It uses an Arduino board, with a USB connection, (and Uno for example) to control the relay and combines this with pfod (Protocol for Operation Discovery) www.pfod.com.au which will let you control the board/relay from either the Arduino IDE SerialMonitor, or a terminal window (TeraTerm) or a Java program. The message protocol encloses commands in { }, think simplified html for micros, and provides numerous screens, menus, sliders, text and numeric inputs, etc. A detailed protocol spec is available
See Garage Door Remote for a detailed example, with full Arduino code and an example of controlling the relay from TeraTerm as well as the Arduino IDE SerialMonitor.
There is also an Android app, pfodApp, which will do general purpose control via bluetooth, or wifi/internet with 128 bit security. The pfodApp does all the Android stuff, you only need to code some simple strings in your Arduino code to get any menu system you want. See www.pfod.com.au for numerous examples.
You need a USB-GPIO microcontroller:
Adafruit FT232H (about $15)
Arduino Nano ATmega328 (about $7)
See this answer
I would suggest placing a separate Raspberry Pi unit with a wake-on-lan feature activated so you can ping it off and on.
You could do it by combining these two products from Pololu, for about $25:
Micro Maestro (assembled)
Basic SPDT Relay Carrier with 5VDC Relay (Assembled)
The Maestro is mainly a servo controller but you can set any of its channels to be simple digital outputs instead. The output can be controlled from the Maestro Control Center software or you can write your own software. A digital output from a Maestro is suitable to turn on the relay on the relay carrier. The relay could be powered from USB through the Maestro; I think it draws about 100 mA of current so that probably will not be a problem for most USB ports, though it would not be USB-compliant because the total current drawn by the Maestro and the relay would be over 100 mA. You could supply your own power source for the relay if you are worried about that.
I want to be able to turn my PC on and off using an IR-remote sensor that is connected via USB to the PC. The sensor is a custom PCB implemented with an AVR microprocessor and V-USB software USB-implementation.
Now, turning off the PC is no problem with software, but is there any way to turn ON the PC using USB?
(Please note, I'm not talking about booting from USB-stick or USB-power supply ...)
There seem to be two problems:
keeping the USB powered on while the PC is off. It seems that most mainboard have a jumper for this functionality.
bringing the PC back to life. There seems to be no standard functionality for this. The solution is to "press" the PCs power button through the AVR on the USB board. I know, this means extra cable from the USB to the PC, but it seems to be the easiest solution.
Another workaround could be to send the power-on signal to the PC over ethernet. But I guess this will be more complicated than the power button solution and it involves extra cables too.
This Microsoft knowledgebase article describes how to enable "wake on USB" for a USB mouse. I just checked, and my keyboard device entry (on Windows Vista) has the same choice, already checked.
So, if your AVR is emulating a USB keyboard or mouse, it should be possible to wake the computer by sending the proper data.
there must be a way to do this with USB, since some PCs can be switched on with the keyboard. I think this will be some looking whether your mainboard/BIOS support it (it may be you need to turn it on in BIOS, this will probably also ensure your device gets power from USB although the PC is switched off), and whether that V-USB (unknown to me) can send the "wakeup"-signal.
good luck !
How "off" does the PC need to be? Is waking from sleep/suspend enough? The USB standard describes "remote wake-up".
Aside from enabling remote-wakeup, like unwind mentions, software on the PC is not involved in making this work.