>config get *
ERR unknown command 'config'
however, https://redis.io/commands/config-get says that the command is available since redis 2.0.
My redis_version : 3.2.8
P.S. I have just started learning redis.
Related
I'm trying to build a reactor sls file, which starts running when an event occurs.
The content of the sls file should be as the following cli commands:
sudo salt minion git.add /srv/salt .
sudo salt minion git.commit /srv/salt test
sudo salt minion git.push /srv/salt origin master identity=/home/autogit/.ssh/id_rsa
If i run the code bellow triggered by the reactor. I get the following error message.
[DEBUG ] Reactor is populating module client cache
[ERROR ] An un-handled exception from the multiprocessing process 'Reactor-9:1' was caught:
Traceback (most recent call last):
File "/usr/lib/python2.7/dist-packages/salt/utils/process.py", line 765, in _run
return self._original_run()
File "/usr/lib/python2.7/dist-packages/salt/utils/reactor.py", line 271, in run
self.call_reactions(chunks)
File "/usr/lib/python2.7/dist-packages/salt/utils/reactor.py", line 228, in call_reactions
self.wrap.run(chunk)
File "/usr/lib/python2.7/dist-packages/salt/utils/reactor.py", line 330, in run
self.populate_client_cache(low)
File "/usr/lib/python2.7/dist-packages/salt/utils/reactor.py", line 324, in populate_client_cache
self.reaction_class[reaction_type](self.opts['conf_file'])
KeyError: u'module'
[CRITICAL] Engine 'reactor' could not be started!
I've tried different syntax (old style and new style) but couldn't figure out what the problem is. Always getting an KeyError: u'module' or u'git'.
Also tried it with runner function to run it locally on the master.
git pull:
module.run:
- git.pull:
- cwd: /srv/salt
- remote: git#git.xyz.com:user/sbt.git
- identity: /home/autogit/.ssh/id_rsa
- git.add:
- cwd: /srv/salt
- filename: .
- git.commit:
- cwd: /srv/salt
- remote: git#git.xyz.com:user/sbt.git
- git.push:
- cwd: /srv/salt
- remote: git#git.xyz.com:user/sbt.git
- identity: /home/autogit/.ssh/id_rsa
salt --versions-report
Salt Version:
Salt: 2019.2.0
Dependency Versions:
cffi: Not Installed
cherrypy: unknown
dateutil: 2.6.1
docker-py: Not Installed
gitdb: 2.0.3
gitpython: 2.1.8
ioflo: Not Installed
Jinja2: 2.10
libgit2: Not Installed
libnacl: Not Installed
M2Crypto: Not Installed
Mako: 1.0.7
msgpack-pure: Not Installed
msgpack-python: 0.5.6
mysql-python: Not Installed
pycparser: Not Installed
pycrypto: 2.6.1
pycryptodome: Not Installed
pygit2: Not Installed
Python: 2.7.15rc1 (default, Nov 12 2018, 14:31:15)
python-gnupg: 0.4.1
PyYAML: 3.12
PyZMQ: 16.0.2
RAET: Not Installed
smmap: 2.0.3
timelib: Not Installed
Tornado: 4.5.3
ZMQ: 4.2.5
System Versions:
dist: Ubuntu 18.04 bionic
locale: UTF-8
machine: x86_64
release: 4.15.0-46-generic
system: Linux
version: Ubuntu 18.04 bionic
Since i'm quite new to Salt, hopefully you can give me a hint what i'm doing wrong:
You didn't provide the master config.
About module.run confusion: add in your settings (minion and maybe to master since I don't know your use-case)
use_superseded:
- module.run
That will enable your syntax, more doc about this here: https://docs.saltstack.com/en/latest/ref/states/all/salt.states.module.html#salt.states.module.run
In general: you are executing execution modules from the place that state modules are allowed only (the term module is heavily overused in salt...)
You didn't provide the full Master config. Reactor requires dedicated config to match events to sls files:
https://docs.saltstack.com/en/latest/ref/configuration/master.html#master-reactor-settings
You can also check the doc I've written some time ago about events and reactors:
https://github.com/kiemlicz/util/wiki/Salt-Events-and-Reactor
Assuming you've configured your events-to-sls-files-matching in master config, your provided sls:
git pull:
module.run:
- git.pull:
- cwd: /srv/salt
- remote: git#git.xyz.com:user/
...
will not work.
Mind that reaction happens on Salt Master thus the reaction sls file need to provide type of reaction (local, runner etc.) since it's no longer 'view of one minion' but possibly of tons of minions!
First create runner reaction type (which delegates to some orchestration sls file which will contain your logic wrapped with (I think) salt.function )
Help yourself with aforementioned github link to my attempt of explaining Reactor.
Refer to official doc as well: https://docs.saltstack.com/en/latest/topics/reactor/index.html
I installed Erlang and RabbitMQ as instructed at https://www.rabbitmq.com/install-windows.html. And yes I installed Erlang as Admin user.
But somehow the installation is broken.
rabbitmqctl.bat status
gives
Status of node rabbit#K21788 ...
Error: unable to perform an operation on node 'rabbit#K21788'. Please see diagnostics information and suggestions below.
...
DIAGNOSTICS
===========
attempted to contact: [rabbit#K21788]
rabbit#K21788:
* connected to epmd (port 4369) on K21788
* epmd reports: node 'rabbit' not running at all
other nodes on K21788: ['RabbitMQ']
* suggestion: start the node
Current node details:
* node name: 'rabbitmqcli-1196-rabbit#K21788'
* effective user's home directory: H:\
* Erlang cookie hash: /xiNRP3ci4Ddvw0WKmq9Dw==
Strange, de node default name seams to be wrong.
So I tried:
rabbitmqctl.bat -n RabbitMQ status
Status of node RabbitMQ#K21788 ...
Error:
{:undef, [{:rabbit, :status, [], []}, {:rpc, :"-handle_call_call/6-fun-0-", 5, [file: 'rpc.erl', line: 197]}]}
As a RabbitMQ rookie I feal pretty much lost here. On my Macbook this just works without any problems.
Any ideas how to fix this?
After lots of trial and error I found this workaround:
Stop the preinstalled windows service "RabbitMQ".
If you want you can disable autostart as well.
Open a cmd-Shell.
Go to C:\Program Files\RabbitMQ Server\rabbitmq_server-3.7.14\sbin
Start the server with rabbitmq-server.bat.
Now RabbitMQ starts with the correct defaults. All my Java Examples from the tutorial work as expected.
I don't know why this works and the preinstalled Service does not. But for my dev environment this solution is fine.
Newbie to Ruby on Rails here, I just did a fresh install of Ruby & Rails on Windows 10 (Bash on Ubuntu shell). I seems to having issues on starting the Rails server. Already checked the other threads on the issue, but everyone else is using OSX. :( Hope someone can help!
When running rails s,
root#TEAMROCKETHQ:~/newapp# rails s
/root/.rbenv/versions/2.4.0/lib/ruby/gems/2.4.0/gems/railties-5.0.2/lib/rails/app_loader.rb:40: warning: Insecure world writable dir /root/.rbenv/versions in PATH, mode 040777
=> Booting Puma
=> Rails 5.0.2 application starting in development on http://localhost:3000
=> Run `rails server -h` for more startup options
Puma starting in single mode...
* Version 3.8.0 (ruby 2.4.0-p0), codename: Sassy Salamander
* Min threads: 5, max threads: 5
Environment: development
* Listening on tcp://localhost:3000
Use Ctrl-C to stop
For the first line issue, I tried:
sudo chmod 775 /usr/local
it seems it didn't do anything. Maybe I'm reading the error wrong, but I don't know... When I go to localhost:3000, it returns this error:
=> Booting Puma
=> Rails 5.0.2 application starting in development on http://localhost:3000
=> Run `rails server -h` for more startup options
Puma starting in single mode...
* Version 3.8.0 (ruby 2.4.0-p0), codename: Sassy Salamander
* Min threads: 5, max threads: 5
Environment: development
* Listening on tcp://localhost:3000
Use Ctrl-C to stop
2017-03-09 23:17:26 -0600: Read error: #<Errno::EINVAL: Invalid argument - getsockopt(2)>
/root/.rbenv/versions/2.4.0/lib/ruby/gems/2.4.0/gems/puma-3.8.0/lib/puma/server.rb:124:in `getsockopt'
/root/.rbenv/versions/2.4.0/lib/ruby/gems/2.4.0/gems/puma-3.8.0/lib/puma/server.rb:124:in `closed_socket?'
/root/.rbenv/versions/2.4.0/lib/ruby/gems/2.4.0/gems/puma-3.8.0/lib/puma/server.rb:563:in `handle_request'
/root/.rbenv/versions/2.4.0/lib/ruby/gems/2.4.0/gems/puma-3.8.0/lib/puma/server.rb:425:in `process_client'
/root/.rbenv/versions/2.4.0/lib/ruby/gems/2.4.0/gems/puma-3.8.0/lib/puma/server.rb:289:in `block in run'
/root/.rbenv/versions/2.4.0/lib/ruby/gems/2.4.0/gems/puma-3.8.0/lib/puma/thread_pool.rb:120:in `block in spawn_thread'
Webpage:
The localhost page isn't working
localhost is currently unable to handle this request.
HTTP ERROR 500
It is because puma 3.8.0.
Put gem 'puma', '3.7.1' in your gem file, and bundle install again.
And gem uninstall puma at version 3.8.0, wait until there is a fix.
I did a apt-get upgrade because the load times of our production server were about 40 seconds. I don't have a snapshot before nor after the upgrade.(Although there is a snapshot of six months old) Load times improved to 15-ish seconds but our erizo service stopped working. Erizo was also running on that instance. Restarting the services didn't help so I tried upgrading the packages to the previous version (https://askubuntu.com/questions/138284/how-to-downgrade-a-package-via-apt-get), just like it was but on almost every package there was an error: the previous package version did not excist.(which is strange, because I copied the output of dpkg -l)
Only a few of them were successfully downgraded but I got a serious error when upgrading e1fslibs to it's previous version.:The following packages have unmet dependencies:
e2fsprogs: PreDepends: e2fslibs
Somehow that messed up initramfs and/or initramfs-tools and now the instance is running but I can't get into it.
Connecting to the instance in google cloud platform :Connecting...
Could not connect, retrying (1/3).
google cloud shell isn't able to gcloud compute ssh : Permission denied (publickey).
using gcloud locally also says Permission denied (publickey).
I checked the following:
There are project public keys defined; there aren't any instance public keys defined or any other metadata ( Google Cloud SSH Keys )
In google cloud platform >> compute engine >> VM instances >> permissions>> I see 'compute' is disabled
verify that the daemon is running by navigating to the serial console output page and looking for output lines prefixed with the accounts-from-metadata: string. If you are using a standard image but you do not see these output prefixes in the serial console output, the daemon might be stopped--> I don't see this so I expect it's NOT running.
check firewall rules:(gcloud compute firewall-rules list)
default-allow-ssh default 0.0.0.0/0 tcp:22 //rule is present
Following packages were upgraded:
apt
apt-transport-https
apt-utils
binutils
cloud-init
cloud-initramfs-growroot
cloud-initramfs-rescuevol
comerr-dev
dosfstools
e2fslibs
e2fsprogs
gce-cloud-config
gce-daemon
gce-imagebundle
gce-startup-scripts
google-cloud-sdk
landscape-client
landscape-common l
ibapt-inst1.4 libapt-pkg4.12
libcomerr2
libss2
libudev0 mountall
nginx
nginx-common
nginx-full
ntp
ntpdate
procps
python-apt
python-apt-common
python-lazr.restfulclient
udev
unattended-upgrades
update-manager-core
upstart
whoopsie
x11-utils
This is get from the serial output ::
- mountall: Event failed
- landscape-client is not configured, please run landscape-config.
What to do next?
Apply a startup script to running instance (following this https://cloud.google.com/compute/docs/startupscript) and try to perform Apt-get upgrade ?
try to create a new public key (again) in google cloud shell to access the instance?
In google cloud shell the first time this file was generated after typing gcloud compute --project "enduring-palace-762" ssh --zone "europe-west1-c" "tta-media-test-2"
WARNING: The private SSH key file for Google Compute Engine does not exist.WARNING: You do not have an SSH key for Google Compute Engine.WARNING: [/usr/bin/ssh-keygen] will be executed to generate a key. This tool needs to create the directory /home/developer/.ssh
the generated public key was stored in /home/developer/.ssh /google_compute_engine.pub I made a copy of that, prepended the username and added the content of the public key to compute engine >> metadata>>ssh keys. *key is accepted but the username doesn't show like it does with all the other username - key pairs
I get Permission denied (publickey) error though when using gcloud compute ssh tta-media-test-2 --zone europe-west1-c
When I provide the ssh key file like this
gcloud compute ssh tta-media-test-2 --zone europe-west1-c --ssh-key-file=my-ssh-keys_copy.pub (pwd is inside the folder where key file is)
WARNING: The public SSH key file for Google Compute Engine does not exist.
WARNING: You do not have an SSH key for Google Compute Engine.
WARNING: [/usr/bin/ssh-keygen] will be executed to generate a key.
I get same result when i generate a new key with ssh-keygen -t rsa -f my-ssh-keys
Any other possible solution would be much appreciated.
[update] I am able to ssh the 'broken' instance from local using ssh user#externalIpOfInstance My plan is to bring it to a upgraded stable state, create a snapshot and see from there..
sudo apt-get -f install
0 upgraded, 0 newly installed, 0 to remove and 5 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Setting up initramfs-tools (0.99ubuntu13.5) ...
update-initramfs: deferring update (trigger activated)
Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-3.13.0-79-generic
E: /usr/share/initramfs-tools/hooks/fixrtc failed with return 1.
update-initramfs: failed for /boot/initrd.img-3.13.0-79-generic with 1.
dpkg: error processing initramfs-tools (--configure):
subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
initramfs-tools
E: Sub-process /usr/bin/dpkg returned an error code (1)
sudo apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages have been kept back:
google-chrome-stable
The following packages will be upgraded:
comerr-dev libcomerr2 libss2 unattended-upgrades
4 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
1 not fully installed or removed.
Need to get 0 B/188 kB of archives.
After this operation, 4,096 B of additional disk space will be used.
Do you want to continue [Y/n]? y
Preconfiguring packages ...
(Reading database ... 178509 files and directories currently installed.)
Preparing to replace comerr-dev 2.1-1.42-1ubuntu2.2 (using .../comerr-dev_2.1-1.42-1ubuntu2.3_amd64.deb) ...
Unpacking replacement comerr-dev ...
Preparing to replace libcomerr2 1.42-1ubuntu2.2 (using .../libcomerr2_1.42-1ubuntu2.3_amd64.deb) ...
Unpacking replacement libcomerr2 ...
Preparing to replace libss2 1.42-1ubuntu2.2 (using .../libss2_1.42-1ubuntu2.3_amd64.deb) ...
Unpacking replacement libss2 ...
Preparing to replace unattended-upgrades 0.76ubuntu1.1 (using .../unattended-upgrades_0.76ubuntu1.2_all.deb) ...
Unpacking replacement unattended-upgrades ...
Processing triggers for install-info ...
Processing triggers for man-db ...
Processing triggers for ureadahead ...
Setting up initramfs-tools (0.99ubuntu13.5) ...
update-initramfs: deferring update (trigger activated)
Setting up libcomerr2 (1.42-1ubuntu2.3) ...
Setting up comerr-dev (2.1-1.42-1ubuntu2.3) ...
Setting up libss2 (1.42-1ubuntu2.3) ...
Setting up unattended-upgrades (0.76ubuntu1.2) ...
Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-3.13.0-79-generic
E: /usr/share/initramfs-tools/hooks/fixrtc failed with return 1.
update-initramfs: failed for /boot/initrd.img-3.13.0-79-generic with 1.
dpkg: error processing initramfs-tools (--configure):
subprocess installed post-installation script returned error exit status 1
No apport report written because MaxReports is reached already
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
Errors were encountered while processing:
initramfs-tools
E: Sub-process /usr/bin/dpkg returned an error code (1)
sudo apt-get remove initramfs-tools-bin
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
cron : Depends: adduser but it is not going to be installed
procps : Depends: initscripts
upstart : Depends: initscripts
Depends: mountall
Depends: ifupdown (>= 0.6.10ubuntu5)
E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
what to do here?
If you were able to SSH into the instance using a given SSH key before, the most likely reason it would stop working is if you somehow removed that SSH key or if the SSH daemon wasn't running/was otherwise broken. It appears as though in the downgrade you broke this machine.
Why do you need this particular VM instance? Does it have important data? If so, you can shut it off, mount its disk using a fresh VM instance, and copy that data off.
If it runs a service, you should probably cut over to a new machine: even if you're able to get into the instance, there's no telling what still works and what doesn't.
i'm facing issue in bigbluebutton insatllation
Reading state information...
You might want to run 'apt --fix-broken install' to correct these.
The following packages have unmet dependencies:
bigbluebutton : Depends: bbb-config but it is not going to be installed
gce-compute-image-packages : Depends: google-compute-engine but it is not going to be installed
E: Unmet dependencies. Try 'apt --fix-broken install' with no packages (or specify a solution).
Hello I'm currently trying to build WebRTC on Asterisk, so far i've been following this site (http://www.nethram.com/webrtc-with-asterisk-12/) and get "aconfigure: error: unable to use SRTP" after running ./configure pjproject.
It gives me this notification about SRTP (since I configure it with "--with-external-srtp")
the error message (the others are working fine)==>
checking if external SRTP devkit is installed... aconfigure: error: Unable to use SRTP. If SRTP development files are not available in the default locations, use CFLAGS and LDFLAGS env var to set the include/lib paths
Can anybody help? Thank you very much
Let's use v1.5.0 instead of current (v2.x)
git clone https://github.com/cisco/libsrtp/
cd libsrtp
git fetch
git tag -l
git checkout v1.5.0
..