I try to launch a program in Matlab 7.0.0.
The program was coded under Matlab 7.0.0, Also I install Visual Basic 6 because the program required an ActiveX. The OS is XP in VirtualBox.
But the program didn't work.
The Error is :
??? Too many outputs requested. Most likely cause is missing [] around
left hand side that has a comma separated list expansion.
Error in ==> esfa>esfa_OpeningFcn at 59
h=varargin{:};
Error in ==> gui_mainfcn at 153
feval(gui_State.gui_OpeningFcn, gui_hFigure, [], guidata(gui_hFigure), varargin{:});
Error in ==> esfa at 44
gui_mainfcn(gui_State, varargin{:});
Any Help please?
Thanks in advance.
Related
I'm on OS X 10.11.1 running the latest version of X Code. I installed Lua 5.3 today from source with no problem. Seems to work correctly. No errors installing luarocks and then using it to install moonscript. However, both moon and moonc give the following error when invoked from the command line:
$ moon
/usr/local/bin/lua: /usr/local/share/lua/5.3/alt_getopt.lua:24: attempt to call a nil value (global 'module')
stack traceback:
/usr/local/share/lua/5.3/alt_getopt.lua:24: in main chunk
[C]: in function 'require'
/usr/local/lib/luarocks/rocks/moonscript/0.4.0-1/bin/moon:2: in main chunk
[C]: in ?
Looking at alt_getopt.lua shows that it is indeed using the now-defunct 'module' keyword. The GitHub project for this module appears to be dead with no action in the past 3 years.
How should I proceed to get Moonscript working on my system?
Yes, as you noted, module has been deprecated for quite a while and was only working with earlier versions because of compatibility switches.
You can comment out the line 24 in alt-getopt and add the following line to the end of the alt-getopt.lua file: return {get_opts = get_opts, get_ordered_opts = get_ordered_opts}.
This should make this module Lua 5.2/5.3 compatible (I haven't checked if there are any other compatibility issues with using Lua 5.3 though).
This is a very annoying problem while generating release build files. Here is the steps I did while building:
Select Project > Export Release Build
Select Signed Native Installer
Import certificate
Click Next.
I always got the following error:
https://forums.adobe.com/servlet/JiveServlet/showImage/2-6524012-651585/build_error.png
Platform conversion failed. Process exited with error 5. Output was
"[ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
text="Unhandled exception Error: EndUpdateResource: Windows Error #5"
errorID=0]
I have the following setup:
OS: Windows 8.1
System type: 64-bit
Flash Builder Version: 4.6 Premium
Installed FB: FlashBuilder_4_6_LS10.exe
Please help. This is giving me a lot of headaches for a couple of days now.
Additionally, here's the stack trace:
java.io.IOException: Platform conversion failed. Process exited with
error 5. Output was "[ErrorEvent type="error" bubbles=false
cancelable=false eventPhase=2 text="Unhandled exception Error:
EndUpdateResource: Windows Error #5" errorID=0] " at
com.adobe.air.nai.NativePackager.conversionFail(NativePackager.java:222)
at
com.adobe.air.nai.NativePackager.invokePlatformConversion(NativePackager.java:203)
at
com.adobe.air.nai.NativePackager.createPackage(NativePackager.java:92)
at
com.adobe.flexbuilder.multisdk.apollo.export.AIRNativeInstallerPackager.create(AIRNativeI
nstallerPackager.java:129) at
com.adobe.flexbuilder.exportimport.releaseversion.ExportReleaseVersionManager.doExport(Ex
portReleaseVersionManager.java:586) at
com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionWizard$1.run(Exp
ortReleaseVersionWizard.java:208)
I also suspect this is because of the following settings:
Eclipse.ini
https://forums.adobe.com/servlet/JiveServlet/showImage/2-6525217-651726/eclipse.png
...
-startup plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar
--launcher_library plugins/org.eclipse.equinox.launcher.win32.win32.x86_1.1.100.v20110502.jar
...
Notice that the plugin used is not intended for x64 processors.
#ActionScript3030 is correct, for anyone finding this later on, if you re-link your Library Paths (even if they look correct) this should rectify your issue.
The issue is caused by the links not being able to resolve to their GUID counterparts in your AppData/Local folder. This happens quite commonly when you create a new user profile and try to copy over your old user profiles information.
I already figured this out. I created a virtual machine with windows 7 32bit operating system and I'm happy now :)
If you initially created your project on a different system then try to compile it in another system, the class source and swc paths may not match. These paths could be there but not being implemented in code, so you will not get any run time errors while debugging, but it will give you the error 5 during compilation.
Solution:
Remove the idle paths not directly in use in your code. You can identify them by simply checking the path.
Found the same issue when trying to use Microsoft Essential Security on my Windows 7 x32. When i uinstall it - problem gone. So try to check your firewall settings if stucking the same problem.
Just to add an alternative solution (I'm on an x64 Windows and want to keep build exported for x64), in my case the error popped up when building the project with the AIR SDK defined in the app.xml (an older one, 3.9) and went away when I explicitly used a newer SDK (19).
(Disclaimer: I used the command line adt tool from the SDK to build, not Flash Builder).
A little late, but might possibly help someone.
I had the same error recently with FlashDevelop. Figured out that the my path was too long. When I renamed some long folder and file names, the error disappeared.
Try to disable UAC on Windows 8. Change it to "Never notify". The problem
I have already build webkit on windows 7, 32 bit. Now I am trying to build it on windows 7,64 bit, but while I am trying to update the source tree using script "update-webkit", I am getting the below error:
Updating OpenSource
Can't locate HTTP/Date.pm in #INC (#INC contains: /usr/lib/perl5/site_perl/5.14/x86_64-cygwin-threads /usr/lib/perl5/site_perl/5.14 /usr/lib/perl5/vendor_perl/5.14/x86_64-cygwin-threads /usr/lib/perl5/vendor_perl/5.14 /usr/lib/perl5/5.14/x86_64-cygwin-threads /usr/lib/perl5/5.14 .) at /cygdrive/d/source/WebKit-r157864.tar/WebKit-r157864/Tools/Scripts/update-webkit-dependency line 39.
BEGIN failed--compilation aborted at /cygdrive/d/source/WebKit-r157864.tar/WebKit-r157864/Tools/Scripts/update-webkit-dependency line 39.
Died at Tools/Scripts/update-webkit-auxiliary-libs line 40.
Died at ./update-webkit line 84.
So can anybody help me to resolve this problem and tell the steps to build the webkit open source code successfully. Thanks in advance.
Try "cpan HTTP::Date"? Hope this work.
Maybe joining the WebKit mailing list will help. https://lists.webkit.org/mailman/listinfo/webkit-help
I'm trying to debug an objective C program. It used to run, and I'm not sure what changes could have broken it, but it no longer runs at all. In the debugger, I now get:
.
.
.
unable to read unknown load command 0x80000022
unable to read unknown load command 0x80000022
unable to read unknown load command 0x80000022
Program loaded.
sharedlibrary apply-load-rules all
run
Error calling thread_get_state for GP registers for thread 0x16131lx506^error,msg="error on line 207 of \"/SourceCache/gdb/gdb-908/src/gdb/macosx/i386-macosx-nat-exec.c\" in function \"fetch_inferior_registers\": (os/kern) invalid argument (0x4)\n"
I've seen several places that claim te explain the 1st warning, but none of them seem appropriate. Nothing online claims to explain the error.
Any clues as to what these errors mean in conjunction?
ETA: I just upgraded to 10.6, so it may have started then, although I'm compiling to target 10.4...
Is this relevant? From the Xcode release notes:
Note: GCC 4.2 cannot be used with the
Mac OS X 10.4u SDK. If you want to
build targets using the 10.4u SDK on
Xcode 3.2, you must set the Compiler
Version to GCC 4.0
Whenever I run any jython program in Eclipse, I got the following error in the beginning of the output:
" Failed to
get environment, environ will be
empty: (0, 'Failed to execute command
([\'sh\', \'-c\', \'env\']):
java.io.IOException: Cannot run
program "sh": Crea teProcess error=2,
The system cannot find the file
specified')
First, my environment is:
Windows 2008
JDK 1.6.0u10
jython 2.2.1
I did some digging, and I realized that this message is produced in the function javaos.getenv().
Whenever I call the javaos.getenv() function, it throws the following error:
C:\jython2.2.1>java -jar jython.jar
import javaos
print javaos.getenv("user.name")
Failed to get environment, environ
will be empty: (0, 'Failed to execute
command ([\'sh\', \'-c\', \'env\']):
java.io.IOException: Cannot run
program "sh": Crea teProcess error=2,
The system cannot find the file
specified')
This is strange, because I'm currently using a Windows machine, not an Unix.
Try to uncomment and change the os setting in the 'registry' file
(it is in the same directory as your jython.jar / i hope)
# python.os determines operating-specific features, similar to and overriding the
# Java property "os.name".
# Some generic values are also supported: 'nt', 'ce' and 'posix'.
# Uncomment the following line for the most generic OS behavior available.
#python.os=None
python.os=nt
# try nt or dos
Interesting. Well, I seem to have found the relevant code here:
http://www.koders.com/python/fid4B7C33153C1427D2CE19CE361EA9519D1652F802.aspx?s=self
If you look towards the bottom, it seems when setting the environment command jython thinks your os is posix. You say you're using "Windows 2008". I'm not sure what that is. Do you mean Windows Server 2008? If so, it's quite new and if you look at the _getOsType function in the same module, it looks like it might be too new for that module. You may need to upgrade to the most recent version of jython or Eclipse. But it's quite possible they haven't yet released a version that supports this OS. If that's the case, you may need to just report the bug to them.
I'm running on Windows 7.
I'm running Jython as a script in the Websphere wsadmin tool.
I encountered this same error.
I cut-n-pasted these lines from javaos.py into my script:
os or sys.registry.getProperty( "python.os" ) or \ java.lang.System.getProperty( "os.name" )
and it returned "Windows Vista".
So I performed the same surgery as suggested above, ie., add Windows Vista to javaos.py and that solved my problem.
I ran into the same error, using Windows Vista, and Jython 2.5.1, under Eclipse/PyDev By editing javaos.py, to include "Windows Vista" in the OR statement in getOsType,;
I fixed the error. (I've filed a bug with the fix under the PyDev Tracker at SourceForge.)
Details:
I installed the full version of Jython, and that did not help.
I also tried editing the "registry" file in the Jython tree. That did not help either.
Then I looked at the files in:
C:\eclipse-platform-3.5-win32\eclipse\plugins\org.python.pydev.jython_1.4.8.2881\Lib
to find "javaos.py" and added a bit of code to read:
def _getOsType( os=None ):
os = os or sys.registry.getProperty( "python.os" ) or \
java.lang.System.getProperty( "os.name" )
_osTypeMap = (
( "nt", r"(nt)|(Windows NT)|(Windows NT 4.0)|(WindowsNT)|"
r"(Windows 2000)|(Windows XP)|(Windows CE)|(Windows Vista)" ),
( "dos", r"(dos)|(Windows 95)|(Windows 98)|(Windows ME)" ),
( "mac", r"(mac)|(MacOS.*)|(Darwin)" ),
( "None", r"(None)" ),
( "posix", r"(.*)" ), # default - posix seems to vary mast widely
)
for osType, pattern in _osTypeMap:
if re.match( pattern, os ):
break
return osType
I've used this hack from Dave Brands blog: http://dbrand666.wordpress.com/2010/04/08/fix1/
try:
import javaos
if javaos._osType == 'posix' and \
java.lang.System.getProperty('os.name').startswith('Windows'):
sys.registry.setProperty('python.os', 'nt')
reload(javaos)
except:
pass