I need to run Google Chrome remotely on a virtual machine using SSH. I do not want xforwarding - I want to utilize the GPU available on the vm. When I try running google-chrome I get following error:
[19615:19615:0219/152933.751028:ERROR:browser_main_loop.cc(1512)] Unable to open X display.
I've tried to setting my DISPLAY env value to various values:
export DISPLAY=localhost:0.0
export DISPLAY=127.0.0.1:0.0
export DISPLAY=:0.0
I've also tried replacing 0.0 in abowe examples with different values.
I have ForwardX11 no in /etc/ssh/sshd_config
I tried setting up target like this:
systemctl isolate multi-user.target
When I try to run sudo lshw -C display i get folowing output:
*-display
description: VGA compatible controller
product: Hyper-V virtual VGA
vendor: Microsoft Corporation
physical id: 8
bus info: pci#0000:00:08.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: vga_controller bus_master rom
configuration: driver=hyperv_fb latency=0
resources: irq:11 memory:f8000000-fbffffff
*-display UNCLAIMED
description: VGA compatible controller
product: GM204GL [Tesla M60]
vendor: NVIDIA Corporation
physical id: 1
version: a1
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress vga_controller bus_master cap_list
configuration: latency=0
resources: iomemory:f0-ef iomemory:f0-ef memory:41000000-41ffffff memory:fe0000000-fefffffff memory:ff0000000-ff1ffffff
I've tried to update my gpu drivers by:
wget https://www.nvidia.com/content/DriverDownload-March2009/confirmation.php?url=/tesla/375.66/nvidia-diag-driver-local-repo-rhel7-375.66-1.x86_64.rpm
yum -y install nvidia-diag-driver-local-repo-rhel7-375.66-1.x86_64.rpm
But after that I still see UNCLIMED next to my NVIDIA gpu.
Aby ideas?
You can try with Xvfb. it does not require additional hardware.
Install Xvfb if you didn't install it yet and do the following steps.
sudo apt-get install -y xvfb
Dependencies to make "headless" chrome/selenium work:
sudo apt-get -y install xorg xvfb gtk2-engines-pixbuf
sudo apt-get -y install dbus-x11 xfonts-base xfonts-100dpi xfonts-75dpi xfonts-cyrillic xfonts-scalable
Optional but nifty: For capturing screenshots of Xvfb display:
sudo apt-get -y install imagemagick x11-apps
Make sure that Xvfb starts every time the box/vm is booted:
Xvfb -ac :99 -screen 0 1280x1024x16 &
export DISPLAY=:99
Run Google Chrome
google-chrome
Okay guys. I found my problem after 2 hours of going crazy. My box was configured correctly. What you can NOT do, is ssh from one box, to another box, to this box and expect X11 forwarding to play nicely. Without tearing apart the entire network, I found that if I shelled over from the MAIN box to this box ( no double or triple ssh'ing) chrome comes right up as a regular user using CLI. So it was a matter of multiple shells from multiple boxes that made the display say it was set to NOTHING! Setting the display manually only complicates the problems. Once I shelled directly over to this box from the main outside box, my display was set to 10:0, which is first instance in my configuration. Don't make this mistake, you will waste valuable time.
FWIW, I ran into this when using SSH to log into a Selenium chrome node in a Docker compose stack. Chrome would launch if I invoked it as root with sudo -u seluser google-chrome, but not if I logged in as seluser. The trick turned out to be that root had DISPLAY set to :99:0, and seluser didn't have it set at all. If I set it explicitly (either from a seluser shell or from the docker compose exec command line) it worked.
$ docker-compose exec -u seluser \
selenium-chrome \ # or whatever your service is called
/bin/bash
seluser#c02cda62b751:/$ export DISPLAY=:99:0
seluser#c02cda62b751:/$ google-chrome http://app.test:3000/home
or
$ docker-compose exec -u seluser -e DISPLAY=:99:0 \
selenium-chrome \
google-chrome http://app.test:3000/home
That :99.0 is undocumented, though, so if this isn't working, you might try checking root's DISPLAY value with:
docker-compose exec -u root selenium-chrome bash -c 'echo "${DISPLAY}"'
I faced the same issue with WSL and Ubuntu. I have unininstalled/Reset the ubuntu. After that, I have executed the below command
wsl --set-default-version 2
then I installed again the Ubuntu, I didn't get --no-sandbox issue or any issue.
Hope this will use for someone.
I have setup a new blank react native app.
After installing few node modules I got this error.
Running application on PGN518.
internal/fs/watchers.js:173
throw error;
^
Error: ENOSPC: System limit for number of file watchers reached, watch '/home/badis/Desktop/react-native/albums/node_modules/.staging'
at FSWatcher.start (internal/fs/watchers.js:165:26)
at Object.watch (fs.js:1253:11)
at NodeWatcher.watchdir (/home/badis/Desktop/react-native/albums/node modules/sane/src/node watcher. js:175:20)
at NodeWatcher.<anonymous> (/home/badis/Desktop/react-native/albums/node modules/sane/src/node watcher. js:310:16)
at /home/badis/Desktop/react-native/albums/node modules/graceful-fs/polyfills.js:285:20
at FSReqWrap.oncomplete (fs.js:154:5)
I know it's related to no enough space for watchman to watch for all file changes.
I want to know what's the best course of action to take here ?
Should I ignore node_modules folder by adding it to .watchmanconfig ?
Linux uses the inotify package to observe filesystem events, individual files or directories.
Since React / Angular hot-reloads and recompiles files on save it needs to keep track of all project's files. Increasing the inotify watch limit should hide the warning messages.
You could try editing
# insert the new value into the system config
echo fs.inotify.max_user_watches=524288 | sudo tee -a /etc/sysctl.conf && sudo sysctl -p
# check that the new value was applied
cat /proc/sys/fs/inotify/max_user_watches
# config variable name (not runnable)
fs.inotify.max_user_watches=524288
The meaning of this error is that the number of files monitored by the system has reached the limit!!
Result: The command executed failed! Or throw a warning (such as executing a react-native start VSCode)
Solution:
Modify the number of system monitoring files
Ubuntu
sudo gedit /etc/sysctl.conf
Add a line at the bottom
fs.inotify.max_user_watches=524288
Then save and exit!
sudo sysctl -p
to check it
Then it is solved!
You can fix it, that increasing the amount of inotify watchers.
If you are not interested in the technical details and only want to get Listen to work:
If you are running Debian, RedHat, or another similar Linux distribution, run the following in a terminal:
$ echo fs.inotify.max_user_watches=524288 | sudo tee -a /etc/sysctl.conf && sudo sysctl -p
If you are running ArchLinux, run the following command instead
$ echo fs.inotify.max_user_watches=524288 | sudo tee /etc/sysctl.d/40-max-user-watches.conf && sudo sysctl --system
Then paste it in your terminal and press on enter to run it.
The Technical Details
Listen uses inotify by default on Linux to monitor directories for changes. It's not uncommon to encounter a system limit on the number of files you can monitor. For example, Ubuntu Lucid's (64bit) inotify limit is set to 8192.
You can get your current inotify file watch limit by executing:
$ cat /proc/sys/fs/inotify/max_user_watches
When this limit is not enough to monitor all files inside a directory, the limit must be increased for Listen to work properly.
You can set a new limit temporary with:
$ sudo sysctl fs.inotify.max_user_watches=524288
$ sudo sysctl -p
If you like to make your limit permanent, use:
$ echo fs.inotify.max_user_watches=524288 | sudo tee -a /etc/sysctl.conf
$ sudo sysctl -p
You may also need to pay attention to the values of max_queued_events and max_user_instances if listen keeps on complaining.
From the official document:
"Visual Studio Code is unable to watch for file changes in this large workspace" (error ENOSPC)
When you see this notification, it indicates that the VS Code file watcher is running out of handles because the workspace is large and contains many files. The current limit can be viewed by running:
cat /proc/sys/fs/inotify/max_user_watches
The limit can be increased to its maximum by editing
/etc/sysctl.conf
and adding this line to the end of the file:
fs.inotify.max_user_watches=524288
The new value can then be loaded in by running
sudo sysctl -p
Note that Arch Linux works a little differently, See Increasing the amount of inotify watchers for details.
While 524,288 is the maximum number of files that can be watched, if you're in an environment that is particularly memory constrained, you may wish to lower the number. Each file watch takes up 540 bytes (32-bit) or ~1kB (64-bit), so assuming that all 524,288 watches are consumed, that results in an upper bound of around 256MB (32-bit) or 512MB (64-bit).
Another option
is to exclude specific workspace directories from the VS Code file watcher with the files.watcherExclude setting. The default for files.watcherExclude excludes node_modules and some folders under .git, but you can add other directories that you don't want VS Code to track.
"files.watcherExclude": {
"**/.git/objects/**": true,
"**/.git/subtree-cache/**": true,
"**/node_modules/*/**": true
}
delete react node_modules
rm -r node_modules
yarn or npm install
yarn start or npm start
if error occurs use this method again
Firstly you can run every time with root privileges
sudo npm start
Or you can delete node_modules folder and use npm install to install again
or you can get permanent solution
echo fs.inotify.max_user_watches=524288 | sudo tee -a /etc/sysctl.conf && sudo sysctl -p
It happened to me with a node app I was developing on a Debian based distro. First, a simple restart solved it, but it happened again on another app.
Since it's related with the number of watchers that inotify uses to monitors files and look for changes in a directory, you have to set a higher number as limit:
I was able to solve it from the answer posted here
(thanks to him!)
So, I ran:
echo fs.inotify.max_user_watches=524288 | sudo tee -a /etc/sysctl.conf && sudo sysctl -p
Read more about what’s happening at https://github.com/guard/listen/wiki/Increasing-the-amount-of-inotify-watchers#the-technical-details
Hope it helps!
Remembering that this question is a duplicated: see this answer at original question
A simple way that solve my problem was:
npm cache clear
best practice today is
npm cache verify
npm or a process controlled by it is watching too many files. Updating max_user_watches on the build node can fix it forever. For debian put the following on terminal:
echo fs.inotify.max_user_watches=524288 | sudo tee -a /etc/sysctl.conf && sudo sysctl -p
If you want know how Increase the amount of inotify watchers only click on link.
I use ubuntu 20 server and i add in the file : /etc/sysctl.conf the below line
fs.inotify.max_user_watches=524288
Then save the file and run sudo sysctl -p
After that all is works fine!
I solved this issue by using sudo
ie
sudo yarn start
or
sudo npm start
Use sudo to solve this issue will force the number of watchers to be increased without apply any modifications in system settings. Use sudo to solve this kind of issue is never recommended, although it's a choice that have to be made by you, hope you choose wisely.
Root cause
Most answers above talk about raising the limit, not about taking away the root cause which is typically just a matter redundant watches, typically for files in node_modules.
Webpack
The answer is in the webpack 5 docs:
watchOptions: { ignored: /node_modules/ }
Simply read here: https://webpack.js.org/configuration/watch/#watchoptionsignored
The docs even mention this as a "tip", quote:
If watching does not work for you, try out this option. This may help
issues with NFS and machines in VirtualBox, WSL, Containers, or
Docker. In those cases, use a polling interval and ignore large
folders like /node_modules/ to keep CPU usage minimal.
VS Code
VS Code or any code editor creates lots of file watches too. By default many of them are completely redundant. Read more about it here: https://code.visualstudio.com/docs/setup/linux#_visual-studio-code-is-unable-to-watch-for-file-changes-in-this-large-workspace-error-enospc
Generally we don't need to increase count of filewatchers
In this case we will have more watchers
We need to remove redundant watchers what became zombie
The issue is that we have many filewatchers that are filling out our memory
We just need remove these filewatchers (in case of node)
killall node
In react.js show me same error i fix this way hope work in react native too
echo fs.inotify.max_user_watches=524288 | sudo tee -a /etc/sysctl.conf
sudo sysctl -p
Now you can run npm start again.
npm start
Using the sysctl -p approach after setting fs.inotify.max_user_watches did not work for me (by the way this setting was already set to a high value, likely from me trying to fix this issue a while back ago, using the commonly recommended workaround(s) above).
The best solution to the problem I found here, and below I share the performed steps in solving it - in my case the issue was spotted while running visual studio code, but solving the issue should be the same in other instances, like yours:
Use this script to identify which processes are requiring the most file watchers in your session.
You can then query the current max_user_watches value with sysctl fs.inotify.{max_queued_events,max_user_instances,max_user_watches} and then set it to a different value (a lower value may do it)
sudo sysctl -w fs.inotify.max_user_watches=16384
Or you can simply kill the process you found in (1) that consumes the most file watchers (in my case, baloo_file)
The above, however, will likely need to be done again when restarting the system - the process we identified as responsible for taking much of the file watchers will (in my case - baloo_file) - will again so the same in the next boot. So to permanently fix the issue - either disable or remove this service/package. I disabled it: balooctl disable.
Now run sudo code --user-data-dir and it should open vscode with admin privileges this time. (by the way when it does not - run sudo code --user-data-dir --verbose to see what the problem is - that's how I figured out it had to do with file watchers limit).
Update:
You may configure VS code file watcher exclusion patterns as described here. This may prove to be the ultimate solution, I am just not sure you will always know beforehand which files you are NOT interested watching.
Easy Solution
I found, that a previous solution work well in my case. I removed node_modules and clear the yarn / npm cache.
Long Tail Solution
If you want to have a long-tail solution - e.g. if you often be catched by this error - you can increase the value of allowed watchers (depending on your available memory)
To figure out the current used amount of watchers, instead of only guessing, you can use this handy bash-script:
https://github.com/fatso83/dotfiles/blob/master/utils/scripts/inotify-consumers
I suggest to set the max_user_watches temporary to a high value:
sudo sysctl fs.inotify.max_user_watches=95524288 and run the script.
How to calculate how much you can use
Each watcher needs
540 bytes (32-bit system), or
1 kB (double - on 64-bit OS
So if you will allow to use 512MB (on 64Bit), you set something 524288 as value.
Other way around, you can take the amount of memory you will set, and multiply it by 1024.
Example:
512 * 1024 = 52488
1024 * 1024 = 1048576
It shows you the exact amount of the current used inotify-consumers. So you might have an better Idea, how much you should increase the limit.
If you are running your project in Docker, you should do the echo fs.inotify.max_user_watches=524288 | sudo tee -a /etc/sysctl.conf and all other commands in the host machine, since the container will inherit that setting automatically (and doing it directly inside it will not work).
Late answer, and there are many good answers already.
In case you want a simple script to check if the maximum file watches is big enough, and if not, increase the limit, here it is:
#!/usr/bin/env bash
let current_watches=`sysctl -n fs.inotify.max_user_watches`
if (( current_watches < 80000 ))
then
echo "Current max_user_watches ${current_watches} is less than 80000."
else
echo "Current max_user_watches ${current_watches} is already equal to or greater than 80000."
exit 0
fi
if sudo sysctl -w fs.inotify.max_user_watches=80000 && sudo sysctl -p && echo fs.inotify.max_user_watches=80000 | sudo tee /etc/sysctl.d/10-user-watches.conf
then
echo "max_user_watches changed to 80000."
else
echo "Could not change max_user_watches."
exit 1
fi
The script increases the limit to 80000, but feel free to set a limit that you want.
As already pointed out by #snishalaka, you can increase the number of inotify watchers.
However, I think the default number is high enough and is only reached when processes are not cleaned up properly. Hence, I simply restarted my computer as proposed on a related github issue and the error message was gone.
Another simple and good solution is just to add this to jest configuration:
watchPathIgnorePatterns: ["<rootDir>/node_modules/", "<rootDir>/.git/"]
This ignores the specified directories to reduce the files being scanned
In my case in Angular 13, I added in tsconfig.spec.json
"exclude": [
"node_modules/",
".git/"
]
thanks #Antimatter it gaves me the trick.
echo fs.inotify.max_user_watches=524288 | sudo tee -a /etc/sysctl.conf && sudo sysctl -p
Run This Code In Project Terminal After Run Npm Run Dev
Please refer this link[1]. Visual Studio code has mentioned a brief explanation for this error message. I also encountered the same error. Adding the below parameter in the relavant file will fix this issue.
fs.inotify.max_user_watches=524288
[1] https://code.visualstudio.com/docs/setup/linux#_visual-studio-code-is-unable-to-watch-for-file-changes-in-this-large-workspace-error-enospc
While almost everyone suggests to increase a number of watchers, I couldn't agree that it is a solution.
In my case I wanted to disable watcher completely, because of the tests running on CI using vui-cli plugin which starts web-pack-dev server for each test.
The problem was: when a few builds are running simultaneously they would fail because watchers limit is reached.
First things first I've tried to add the following to the vue.config.js:
module.exports = {
devServer: {
hot: false,
liveReload: false
}
}
Ref.: https://github.com/vuejs/vue-cli/issues/4368#issuecomment-515532738
And it worked locally but not on CI (apparently it stopped working locally the next day as well for some ambiguous reason).
After investigating web-pack-dev server documentation I found this:
https://webpack.js.org/configuration/watch/#watch
And then this:
https://github.com/vuejs/vue-cli/issues/2725#issuecomment-646777425
Long story short this what eventually solved the problem:
vue.config.js
module.exports = {
publicPath: process.env.PUBLIC_PATH,
devServer: {
watchOptions: {
ignored: process.env.CI ? "./": null,
},
}
}
Vue version 2.6.14
if you working with vs code editor any editor that error due to large number of files in projects. node_modules and build not required in it so remove in list. that all open in vs code files menu
You have to filter unnecessary folders file sidebar
Goes to Code > Preferences > settings
in search setting search keyword "files:exclude"
Add pettern
**/node_modules
**/build
That's it
Try this , I was facing it for very long time but at the end it is solved by this,
echo fs.inotify.max_user_watches=524288 | sudo tee -a /etc/sysctl.conf && sudo sysctl -p
The most important step after that is restart your system.
2 fixes if you've already added: fs.inotify.max_user_watches=524288
Reboot the machine, things will work again
Rename the folder that is causing the issue (for me node_modules) to an arbitrary name (node_modilesa) and then rename right back. This will remove the watches that linux had put on those folders. Allowing you code as normal again.
I encountered this issue on a linuxmint distro. It appeared to have happened when there was so many folders and subfolders/files I added to the /public folder in my app.
I applied this fix and it worked well...
$ echo fs.inotify.max_user_watches=524288 | sudo tee -a /etc/sysctl.conf
change directory into the /etc folder:
cd /etc
then run this:
sudo systcl -p
You may have to close your terminal and npm start again to get it to work.
If this fails i recommend installing react-scripts globally and running your application directly with that.
$ npm i -g --save react-scripts
then instead of npm start run react-scripts start to run your application.
I tried increasing number as suggested but it didn't work.
I saw that when I login to my VM, it displayed "restart required"
I rebooted VM and it worked
sudo reboot
it is to easy to fix this
echo fs.inotify.max_user_watches=524288 | sudo tee -a /etc/sysctl.conf
and run your project.
if there is fs.inotify.max_user_watches=524288 in your /etc/sysctl.conf,
run same command(echo fs.inotify.max_user_watches=524288 | sudo tee -a /etc/sysctl.conf). and run your project
For vs code, see detailed instructions here:
https://code.visualstudio.com/docs/setup/linux#_visual-studio-code-is-unable-to-watch-for-file-changes-in-this-large-workspace-error-enospc