I have an issue with using Jrebel.
I am trying to build Dropwizard APIs in Intellij Idea.
Any change in method signature(eg name of parameter or additional parameters) does not reflect automatically in JRebel Build. Stop and Re-run will make it Fix.
Same problem in DAO class at annotated query( #SqlQuery(“any change here will make problems”) )
IDE:- Intellij Idea 13.0.1
Jrebel:- 5.5.0-idea13
Did you actually compile the code? JRebel doesn't build the code for you but relies on the compiler results. Well, if you're on IDEA 13, and the deployment is configured via artifacts, then you can configure IDEA to make the project automatically in Settings | Compiler | Make project automatically - then the IDE will make the project once you have made changes to the code, with some delay thoug (~1.5 seconds).
Second, make sure that rebel.xml is included into deployment.
For the problems with changes in SqlQuery annotation - the best you can do is to report such problem to the official JRebel support or to the forums.
Related
What are the possible causes of a "java.lang.Error: Unresolved compilation problem"?
Additional information:
I have seen this after copying a set of updated JAR files from a build on top of the existing JARs and restarting the application. The JARs are built using a Maven build process.
I would expect to see LinkageErrors or ClassNotFound errors if interfaces changed. The above error hints at some lower level problem.
A clean rebuild and redeployment fixed the problem. Could this error indicate a corrupted JAR?
(rewritten 2015-07-28)
Summary: Eclipse had compiled some or all of the classes, and its compiler is more tolerant of errors.
Long explanation:
The default behavior of Eclipse when compiling code with errors in it, is to generate byte code throwing the exception you see, allowing the program to be run. This is possible as Eclipse uses its own built-in compiler, instead of javac from the JDK which Apache Maven uses, and which fails the compilation completely for errors. If you use Eclipse on a Maven project which you are also working with using the command line mvn command, this may happen.
The cure is to fix the errors and recompile, before running again.
The setting is marked with a red box in this screendump:
try to clean the eclipse project
you just try to clean maven by command
mvn clean
and after that following command
mvn eclipse:clean eclipse:eclipse
and rebuild your project....
Your compiled classes may need to be recompiled from the source with the new jars.
Try running "mvn clean" and then rebuild
The major part is correctly answered by Thorbjørn Ravn Andersen.
This answer tries to shed light on the remaining question: how could the class file with errors end up in the jar?
Each build (Maven & javac or Eclipse) signals in its specific way when it hits a compile error, and will refuse to create a Jar file from it (or at least prominently alert you). The most likely cause for silently getting class files with errors into a jar is by concurrent operation of Maven and Eclipse.
If you have Eclipse open while running a mvn build, you should disable Project > Build Automatically until mvn completes.
EDIT:
Let's try to split the riddle into three parts:
(1) What is the meaning of "java.lang.Error: Unresolved compilation
problem"
This has been explained by Thorbjørn Ravn Andersen. There is no doubt that Eclipse found an error at compile time.
(2) How can an eclipse-compiled class file end up in jar file created
by maven (assuming maven is not configured to used ecj for
compilation)?
This could happen either by invoking Maven with no or incomplete cleaning. Or, an automatic Eclipse build could react to changes in the filesystem (done by Maven) and re-compile a class, before Maven proceeds to collect class files into the jar (this is what I meant by "concurrent operation" in my original answer).
(3) How come there is a compile error, but mvn clean succeeds?
Again several possibilities: (a) compilers don't agree whether or not the source code is legal, or (b) Eclipse compiles with broken settings like incomplete classpath, wrong Java compliance etc. Either way a sequence of refresh and clean build in Eclipse should surface the problem.
I had this error when I used a launch configuration that had an invalid classpath. In my case, I had a project that initially used Maven and thus a launch configuration had a Maven classpath element in it. I had later changed the project to use Gradle and removed the Maven classpath from the project's classpath, but the launch configuration still used it. I got this error trying to run it. Cleaning and rebuilding the project did not resolve this error. Instead, edit the launch configuration, remove the project classpath element, then add the project back to the User Entries in the classpath.
I got this error multiple times and struggled to work out. Finally, I removed the run configuration and re-added the default entries. It worked beautifully.
Just try to include package name in eclipse in case if you forgot it
Import all packages before using it, EX: import java.util.Scanner before using Scanner class.
These improvements might work and it will not give Java: Unresolved compilation problem anymore.
Also make sure to check compiler compliance level and selected jdk version is same
As a weird case, I encountered such an exception where the exception message (unresolved compilation bla bla) was hardcoded inside of generated class' itself. Decompiling the class revealed this.
I had the same issue using the visual studio Code. The root cause was backup java file was left in the same directory.
Removed the backup java file
When the build failed, selected the Fix it, it cleaned up the cache and restarted the workSpace.
I am an Eclipse/STS user/developer, now trying to use IntelliJ Idea (CE)
2020.2.(1,2,3)
For a project based on Gradle, how spring-integration, when I open the IDE it happens the following
Ok, let the IDE load the project ... but
From above, that is the problem, I don't want that the IDE starts automatically to build/rebuild the project. I just need, open the project and that's all.
Observation: for example in Eclipse/STS exists the option to disable Build Automatically
I did do a research in the Web and I read the following posts and questions:
How to disable automatic gradle builds?
IntelliJ IDEA “Build project automatically” apparently not working
Intellij IDEA Java classes not auto compiling on save
Sadly the dialog options were changed but ...
Therefore:
From above, seems nothing to do.
Observation: from above observe the Build project automatically option is disabled
Even with that disabled and after to restart the IDE, I must always stop manually the build process
So what is missing? or Do I need a special extra plugin to accomplish my goal?
The images that you show indicate that you are building with Gradle, but the Compiler option that you disable is relevant for building projects with Idea not with Gradle.
For the 2020.2 version, you need to do the following:
Open the Setting > Build Tools page.
Disable the "Reload changes in build scripts" option.
This way you can manually control the reload. When you change the build script, you will see a small gradle icon in the right side of the editor.
For more info, refer to the IntelliJ IDEA help > Gradle section.
https://www.jetbrains.com/help/idea/work-with-gradle-projects.html#auto_reload
There are two different things in IntelliJ's Gradle support that sometimes confused: sync and build. Your pictures demonstrate sync process (note caption on the toolwindow). Word build is kind of misleading here.
What is sync? In gradle we use Groovy to define the build procedure. Groovy is an imperative programming language, so it's hard to predict resulting dependencies graph without actually executing the script. During the sync Idea executes configuration phase of gradle build (one that builds dependency graph), and obtains configured objects from the Gradle daemon. This information is used to setup project in the IDE: modules, libraries, dependencies, which sources are test, which are prod, etc.
Actual build is not happening during sync. You can convince yourself by adding syntax error to any source file, and observe that the sync succeeds. But build will fail if you invoke it.
In answer to the original question: you can't disable automatic build, because it is not enabled.
Is it possible to disable sync in Gradle project? Short answer - no. If you need a code browser, which is not required to understand all the cross-references in the source code, IDEA is not the best choice probably.
TL;DR;
Without sync IDE does not know which files are sources, and which are not. IDEA cannot open folders. It only can open projects. Good thing is that module can contain folder. So you can do the following: File | New | Project. Select Empty project, Next, select some random folder outside the source folder you want to open, Finish.
Then add new module:
Select Java in the left panel, everything else keep default, Next, Finish. Then in new module remove existing content root, and add folder with sources as new content root
Resulting project is mostly useless. Tons of red code (at least, unresolved symbols from external libraries), no inspections, no navigation, no sense. But it might be useful in some rare situations indeed.
The official Kotlin documentation states:
Add kotlin.code.style=official property to the gradle.properties file at the project root.
I'm trying to understand how kotlin-gradle-plugin handles this property.
Which gradle task uses it?
When running gradle build, I don't see my code being reformatted, even if I format my code badly on purpose.
I went through the Github source code of the plugin but couldn't properly get to understand it.
Thanks for your help.
Kotlin Gradle plugin doesn't use this property, as it's not responsible for reformatting the code. Instead, this property is used by Gradle importer of Kotlin plugin for IntelliJ IDEA.
This facade provides access to Gradle properties defined for the project:
https://github.com/JetBrains/kotlin/blob/v1.4.10/idea/idea-gradle/src/org/jetbrains/kotlin/idea/configuration/GradlePropertiesFileFacade.kt
It checks local.properties first in case user wants to override this value in the local configuration (this file is usually added to .gitignore for VCS to skip it during it's operations), then in usual gradle.properties.
Then the property gets consumed to configure the project here:
https://github.com/JetBrains/kotlin/blob/v1.4.10/idea/idea-gradle/src/org/jetbrains/kotlin/idea/configuration/KotlinGradleSourceSetDataService.kt#L158-L159
Same thing goes for Maven-based projects. These are the only two places the property is used throughout Kotlin repository apart from tests right now.
I've created a gradle modules main that contains main program logic and codegen that contains annotation definitions with processors. I found that:
Please note that kapt is still not supported for IntelliJ IDEA’s own build system. Launch the build from the “Maven Projects” toolbar whenever you want to re-run the annotation processing.
on kapt page (https://kotlinlang.org/docs/reference/kapt.html) but I really need it. May be there is some (may be ugly) workaround for that? Terminal background worker or prebuild tasks or something else?
P.S.
This can appear as duplicate question but I really didn't found working solution at the moment
At the current project we have this problem as well; we use gradle and the work around is to run gradle classes testClasses from the commandline - either in an external terminal program or in IJ's terminal (alt-F12 on macOS). This triggers kapt as well, and when this is done I do a Build/Rebuild project from IJ's menu as well.
This is enough if the code that is processed by kapt does not change too often (we just use mapstruct and querydsl).
If you are using maven a mvn compile test-compile should work as well.
Finally I found that repository that does work in Intellij IDEA without any workarounds (https://github.com/miquelbeltran/kotlin-code-gen-sample). Taken from https://medium.com/#Miqubel/hello-world-of-annotation-processing-in-kotlin-3ec0290c1fdd
Background:
I've been using Eclipse for a while and am trying out Intellij now.
I checked out my project from Git (via Intellij) and recognized it as a gradle project. Its created the WAR(& the exploded WAR) all of which are fine.
Question:
When I was using Eclipse, I used the command:
gradlew -Penv=Development :my_webapp:assemble
This used to do a few things including creating a environment.properties file that my dev specific env could use (for selecting database instances etc) based off of -Penv=Development...I'd like the Intellij gradle build to do the same... What's a way to configure Intellij's gradle process to do these custom things or provide same features as provided by this specific command line tool (Note - the code for this is already written in build.gradle file)...
I looked at some of Intellij's docs, but could not find an answer to this.
EDIT:
I've found the solution, for anyone interested - read on...
Seeking guidance from #Stanislav, I was able to add the property as follows:
In your server's run configuration (Run/Debug Configuration -->Your server's config(Jetty etc), there is a section called Before launch, which should have Make/Build Gradle already included
Hit the + sign -->Run Gradle Task --> Select your gradle project (i.e. the web app) --> Select the task (most likely loadEnvironmentConfiguration) --> set the script parameters such as -Penv=Development, hit OK
Move this to before the Build Gradle function (by using the up arrow - to the right of + sign you hit in step 2)
It seems, that you need to create your specific run or debug configuration. You can read about it in official IntelliJ Idea help. All you need, is to modify your configuration for the task you need, by providing the argument -Penv=Development, since it is running with gradle.
You may also need to define Gradle instance, which will be used via settings, if the defaul wrapper wont work for you. You can find almost all you need in the the official help.