I am having some issues as I need the latest version of UHD for my USRP's FPGA image to be compatible. I have the updated version of UHD locally installed but I need GNUraido to use the local version. GNUradio installs the outdated version of UHD and only uses it.
Please ask if you need more information, and thank you.
Related
I have gcc 6.3.0 and to run tensorflow 2.11.0 along with cuda 11.2, I require gcc version 9.3.1, but I just cannot find a simple and straightforward way to do that. Some people say install mysys, other sites point to sourceforge download link, while download links on mingw site point to github repos, I just don't understand how to upgrade this thing.
It would be really helpful if someone could explain it like you are explaining it to complete newbie, step by step.
Last time, I downloaded mysys2 because someone told that it will automatically upgrade gcc to latest version, mysys2 came with a python 3.10, and I was working with python 3.9, and it created a lot of issues, later I had to reset my pc. That's way I just want to know the direct way to upgrade this thing instead of upgrading other software. I also tried by downloading mingw, but the installer available on sourceforge gives gcc 6.3.0 and not the latest gcc.
And what is this cygwin which gives unix like environment, why do i require unix like environment. Even if cygwin can do it easily, I am hesitant to download cygwin, cause i don't want another repeat of tragedy that happened due to mysys2, afterall, installing a complete set of programs that i don't know anything about and will probably never use will only create additional errors.
sudo apt install capnproto
This installs v0.7.0 in my ubuntu 20.04. However, i require v0.8.0 to be installed.
Also, i need v0.6.1 to be installed additionally for backward compatibility.
Any solution for these two cases ?
You will probably need to install from source rather than use a distro package. Unfortunately, it sounds like the Ubuntu distro package hasn't been updated in a while.
Instructions for building and installing from source can be found here: https://capnproto.org/install.html
Old versions are available by changing the version number in the download URL to whichever version you need.
Note that all versions of Cap'n Proto are backwards-compatible, so there should be no need to install older versions, unless you need to run a specific complied binary that was linked against a specific old version.
I recently installed the AC6 System Workbench in order
to work with the STM32 OSXMotionFX Library
and I'm experiencing some troubles related
to the sample application shipped with this library.
Let me know if there is a better place to post such question.
It seems that the sample project works with a different
version of the STM32 Cube expansion drivers for the
X-Nucleo-IKS01A1 expansion board of the base
STM32 Nucleo-F401RE board I have.
In particular the sample project links to driver files
that are missing, some of them seem with different names
compared to the existing ones, that's why I guess
the sample project is referring to an old version of the drivers.
Any one does know how to get the previous versions of the
STM32CubeExpansion_MEMS1_V1.4.0 software ?
I did already search the ST Microelectronics web site
but to no avail, the X-CUBE-MEM1 software
is only shipped at version 2.0.0
and it seems I need the previous version.
Thanks in advance for redirecting me to the correct site in case.
You can download the sample application in the software package osxMotionFX v1.4.0. It is aligned to the new version of the X-CUBE-MEMS1 drivers (v2.0.0). Unfortunately osxMotionFX v1.3.0 is not compatible with the new version of the X-CUBE-MEMS1 drivers.
You mean that osxMotionFX v1.4.0 does not work with X-CUBE-MEMS1 v2.0.0? It is very strange. I'm able to use them without any issue. So probably, you are using osxMotionFX v1.4.0 with an old version of X-CUBE-MEMS1 package. Try to uninstall your current osxMotionFX package, download again the X-CUBE-MEMS1 package v2.0.0 and reinstall the osxMotionFX v1.4.0 over the new X-CUBE-MEMS1 package v2.0.0. Let me know if it fixes your issue.
I use sample application of osxMotionFX v1.4.0 with X-CUBE-MEMS1 v2.0.0. I'm sure that you are not using X-CUBE-MEMS1 v2.0.0 because "x_nucleo_iks01a1_accelero.h" and "x_nucleo_iks01a1_gyro.h" are only defined in X-CUBE-MEMS1 v2.0.0 and not in the previous version of the package. You can also cross-check it looking at the installation folder that you are using for osxMotionFX; if it is not "STM32CubeExpansion_MEMS1_V2.0.0", then you are using a previous version of X-CUBE-MEMS1. Please, try to download again X-CUBE-MEMS1 software package.
My University course will be using VTK 5.0.4 for Data Visualization. The Professor did not provide any guide on how to install VTK on OSX. Prof says to check the website http://www.vtk.org/VTK/resources/software.html , but I don't see any versions for 5.0.4.
Is it possible to install this version of VTK on Mac Maverick operating system? The textbook to be used is http://www.vtk.org/VTK/help/book.html .
The Prof hinted that the VTK maintainer Kitware probably does not have any VTK binary installation file for OSX Maverick and I may need to install VTK starting from the source code. How do I do this?
I seriously doubt 5.0.4 will build on Mavericks. I'd suggest using the latest version instead. You can also use homebrew to install the latest VTK.
Probably this helps you to go on
http://www.evl.uic.edu/julian/mac/vtk/
I have:
Ubuntu 8.04
python 2.5.2 installed on this Ubuntu
matplotlib 0.92.0 installed
I want to upgrade to (atleast) matplotlib 0.99
so that I can do 3d plotting.
The synaptic package (also the command line apt-get)
tells me that whatever I have is the latest matplotlib (which is not true).
How can I install matplotlib 0.99 or matplotlib 1.0.1 ?
You have the latest available package version for your operating system. Given that Ubuntu is at version 11 now and you are using 8.04, the version difference in the matplotlib package might not come as very surprising.
As for installing the newest version, I'd suggest reading:
http://matplotlib.sourceforge.net/faq/installing_faq.html
...if all fails, you can always install from source.
Note that support for Desktop versions of 8.04 LTS is due to expire shortly -- if this is a desktop machine, perhaps the easiest answer is to upgrade to 10.04 LTS, 10.10, or the very-soon-upcoming 11.04 release (or whatever they'll call the next release). Maybe not "the easiest answer", but an answer that includes security updates for Mozilla, Adobe Flash, the Kernel, and so forth.
Many newer versions of packages are supported via the Ubuntu Backports facility, but I didn't spot python-matplotlib in the list of available packages. Perhaps they would provide it if you asked nicely, perhaps it would be too much work.
You can always try installing newer versions from newer releases, but newer versions of python and libraries might introduce worse problems. (But probably will work fine.) See the apt_preferences(5) manpage for details on how to configure multiple APT sources and select some specific packages from a newer distribution (pinning), and rely on the older distribution for all the other packages.
Jim's answer of building the version you need from source is probably your best second option, if installing a newer version of the distribution is too daunting / otherwise impossible at this point.