Extracting last number within string - sql

I have the below sample data and I'm trying to extract the last number within the string. I have the following, which gets me part of the way there, but I'm not sure how to get the value where it isn't the last word.
right(TextDescription, patindex('%[^0-9]%',reverse(TextDescription)) - 1)
The result should be:
ID
code
1
10015662
2
100040344
3
10015370
4
NULL
5
400337
Sample data
Create Table #TestData
(
ID int,
TextDescription varchar(100)
)
insert into #TestData Values (1,'Data From JOE BLOGGS 10015662 tree 10015662')
insert into #TestData Values (2,'Fast Data From JOHN SMITH 10004034 MARY SMITH 100040344 plant')
insert into #TestData Values (3,'Data In 10015370 pot JONES')
insert into #TestData Values (4,'Fast Data From LEE tree')
insert into #TestData Values (5,'Direct Data 106600 JANE GREEN 400337')

Just another option using a a bit of JSON which will convert the string into an array and [key] will maintain the sequence.
Select A.ID
,B.Value
From #TestData A
Outer Apply (
Select top 1 Value
From OpenJSON( '["'+replace(string_escape(TextDescription,'json'),' ','","')+'"]' )
Where try_convert(int,Value) is not null
Order by [key] Desc
) B
Results
ID Value
1 10015662
2 100040344
3 10015370
4 NULL
5 400337

The following will locate the last digit, trim the string at that point, find the preceding non-digit, and then perform another trim to get the final result. As in your original post, calculations are done on a reversed string to accommodate the lack of of a LASTPATINDEX() function. CROSS APPLY is used to build up intermediate results and to avoid duplication of subexpressions.
select T.*, P1.Pos1, P2.Pos2, N.Result
from #TestData T
cross apply (select reverse(TextDescription) AS Reversed) R
cross apply (select nullif(patindex('%[0-9]%', R.Reversed), 0) AS Pos1) P1
cross apply (select stuff(R.Reversed, 1, P1.Pos1 - 1, '') AS Trim1) T1
cross apply (select patindex('%[^0-9]%', T1.Trim1 + 'X') AS Pos2) P2
cross apply (select reverse(left(T1.Trim1, P2.Pos2 - 1)) AS Result) N
-- Partly reduced
select T.*, reverse(left(T1.Trim1, patindex('%[^0-9]%', T1.Trim1 + 'X') - 1)) AS Result
from #TestData T
cross apply (select reverse(TextDescription) AS Reversed) R
cross apply (select stuff(R.Reversed, 1, nullif(patindex('%[0-9]%', R.Reversed), 0) - 1, '') AS Trim1) T1
This will handle a variety of forms, not just space-delimited values.
See this db<>fiddle.

If your interesting values are always found at the end, and are always preceeded by a non-digit, you can use the SUBSTRING with:
lower boundary being the last non-digit before the last number location
length being the difference between last non-digit and first value of last number
WITH cte AS (
SELECT ID, TextDescription,
PATINDEX('%[0-9][^0-9]%', REVERSE(TextDescription) + ' ') AS first_space,
PATINDEX('%[0-9]%' , REVERSE(TextDescription) ) AS last_digit
FROM #TestData
)
SELECT ID,
SUBSTRING(TextDescription,
LEN(TextDescription) -first_space +1,
first_space+1 -last_digit) AS code
FROM cte
Check the demo here.

Please try the following solution leveraging XML and XQuery.
Notable points:
CROSS APPLY is tokenizing TextDescription column as XML.
XQuery FLWOR expression is checking every token if it is castable as
INTEGER data type. And filtering them out if they are not.
XPath predicate [last()] is giving us last INTEGER value.
SQL
-- DDL and sample data population, start
DECLARE #tbl Table (ID INT IDENTITY PRIMARY KEY, TextDescription varchar(100));
INSERT INTO #tbl (TextDescription) VALUES
('Data From JOE BLOGGS 10015662 tree 10015662'),
('Fast Data From JOHN SMITH 10004034 MARY SMITH 100040344 plant'),
('Data In 10015370 pot JONES'),
('Fast Data From LEE tree'),
('Direct Data 106600 JANE GREEN 400337');
-- DDL and sample data population, end
DECLARE #separator CHAR(1) = SPACE(1);
SELECT t.*
, c.query('for $x in /root/r[not(empty(xs:int(.)))]
return $x
').value('(/r[last()]/text())[1]','INT') AS [code]
FROM #tbl AS t
CROSS APPLY (SELECT TRY_CAST('<root><r><![CDATA[' +
REPLACE(TextDescription, #separator, ']]></r><r><![CDATA[') +
']]></r></root>' AS XML)) AS t1(c)
ORDER BY t.ID;
Output
ID
TextDescription
code
1
Data From JOE BLOGGS 10015662 tree 10015662
10015662
2
Fast Data From JOHN SMITH 10004034 MARY SMITH 100040344 plant
100040344
3
Data In 10015370 pot JONES
10015370
4
Fast Data From LEE tree
NULL
5
Direct Data 106600 JANE GREEN 400337
400337

CREATE FUNCTION [ExtractInteger](#String VARCHAR(2000))
RETURNS VARCHAR(1000)
AS
BEGIN
DECLARE #Count INT
DECLARE #IntNumbers VARCHAR(1000)
SET #Count = 0
SET #IntNumbers = ''
WHILE #Count <= LEN(#String)
BEGIN
IF SUBSTRING(#String,#Count,1) = ' '
BEGIN
SET #IntNumbers = #IntNumbers + ' '
END
IF SUBSTRING(#String,#Count,1) >= '0'
AND SUBSTRING(#String,#Count,1) <= '9'
BEGIN
SET #IntNumbers = #IntNumbers + SUBSTRING(#String,#Count,1)
END
SET #Count = #Count + 1
END
RETURN LTRIM(RTRIM(#IntNumbers))
END
The ExtractInteger function will fetch only numbers and spaces, and the below select will take the last word as number:
select right(dbo.ExtractInteger('My 3rd Phone Number is 323-111-CALL'), charindex(' ', reverse(dbo.ExtractInteger('My 3rd Phone Number is 323-111-CALL')) + ' ') - 1)

Related

Parse String With Hyphens As Separators in SQL [duplicate]

I have a table like this
Value String
-------------------
1 Cleo, Smith
I want to separate the comma delimited string into two columns
Value Name Surname
-------------------
1 Cleo Smith
I need only two fixed extra columns
Your purpose can be solved using following query -
Select Value , Substring(FullName, 1,Charindex(',', FullName)-1) as Name,
Substring(FullName, Charindex(',', FullName)+1, LEN(FullName)) as Surname
from Table1
There is no readymade Split function in sql server, so we need to create user defined function.
CREATE FUNCTION Split (
#InputString VARCHAR(8000),
#Delimiter VARCHAR(50)
)
RETURNS #Items TABLE (
Item VARCHAR(8000)
)
AS
BEGIN
IF #Delimiter = ' '
BEGIN
SET #Delimiter = ','
SET #InputString = REPLACE(#InputString, ' ', #Delimiter)
END
IF (#Delimiter IS NULL OR #Delimiter = '')
SET #Delimiter = ','
--INSERT INTO #Items VALUES (#Delimiter) -- Diagnostic
--INSERT INTO #Items VALUES (#InputString) -- Diagnostic
DECLARE #Item VARCHAR(8000)
DECLARE #ItemList VARCHAR(8000)
DECLARE #DelimIndex INT
SET #ItemList = #InputString
SET #DelimIndex = CHARINDEX(#Delimiter, #ItemList, 0)
WHILE (#DelimIndex != 0)
BEGIN
SET #Item = SUBSTRING(#ItemList, 0, #DelimIndex)
INSERT INTO #Items VALUES (#Item)
-- Set #ItemList = #ItemList minus one less item
SET #ItemList = SUBSTRING(#ItemList, #DelimIndex+1, LEN(#ItemList)-#DelimIndex)
SET #DelimIndex = CHARINDEX(#Delimiter, #ItemList, 0)
END -- End WHILE
IF #Item IS NOT NULL -- At least one delimiter was encountered in #InputString
BEGIN
SET #Item = #ItemList
INSERT INTO #Items VALUES (#Item)
END
-- No delimiters were encountered in #InputString, so just return #InputString
ELSE INSERT INTO #Items VALUES (#InputString)
RETURN
END -- End Function
GO
---- Set Permissions
--GRANT SELECT ON Split TO UserRole1
--GRANT SELECT ON Split TO UserRole2
--GO
;WITH Split_Names (Value,Name, xmlname)
AS
(
SELECT Value,
Name,
CONVERT(XML,'<Names><name>'
+ REPLACE(Name,',', '</name><name>') + '</name></Names>') AS xmlname
FROM tblnames
)
SELECT Value,
xmlname.value('/Names[1]/name[1]','varchar(100)') AS Name,
xmlname.value('/Names[1]/name[2]','varchar(100)') AS Surname
FROM Split_Names
and also check the link below for reference
http://jahaines.blogspot.in/2009/06/converting-delimited-string-of-values.html
xml based answer is simple and clean
refer this
DECLARE #S varchar(max),
#Split char(1),
#X xml
SELECT #S = 'ab,cd,ef,gh,ij',
#Split = ','
SELECT #X = CONVERT(xml,' <root> <myvalue>' +
REPLACE(#S,#Split,'</myvalue> <myvalue>') + '</myvalue> </root> ')
SELECT T.c.value('.','varchar(20)'), --retrieve ALL values at once
T.c.value('(/root/myvalue)[1]','VARCHAR(20)') , --retrieve index 1 only, which is the 'ab'
T.c.value('(/root/myvalue)[2]','VARCHAR(20)')
FROM #X.nodes('/root/myvalue') T(c)
I think this is cool
SELECT value,
PARSENAME(REPLACE(String,',','.'),2) 'Name' ,
PARSENAME(REPLACE(String,',','.'),1) 'Surname'
FROM table WITH (NOLOCK)
With CROSS APPLY
select ParsedData.*
from MyTable mt
cross apply ( select str = mt.String + ',,' ) f1
cross apply ( select p1 = charindex( ',', str ) ) ap1
cross apply ( select p2 = charindex( ',', str, p1 + 1 ) ) ap2
cross apply ( select Nmame = substring( str, 1, p1-1 )
, Surname = substring( str, p1+1, p2-p1-1 )
) ParsedData
There are multiple ways to solve this and many different ways have been proposed already. Simplest would be to use LEFT / SUBSTRING and other string functions to achieve the desired result.
Sample Data
DECLARE #tbl1 TABLE (Value INT,String VARCHAR(MAX))
INSERT INTO #tbl1 VALUES(1,'Cleo, Smith');
INSERT INTO #tbl1 VALUES(2,'John, Mathew');
Using String Functions like LEFT
SELECT
Value,
LEFT(String,CHARINDEX(',',String)-1) as Fname,
LTRIM(RIGHT(String,LEN(String) - CHARINDEX(',',String) )) AS Lname
FROM #tbl1
This approach fails if there are more 2 items in a String.
In such a scenario, we can use a splitter and then use PIVOT or convert the string into an XML and use .nodes to get string items. XML based solution have been detailed out by aads and bvr in their solution.
The answers for this question which use splitter, all use WHILE which is inefficient for splitting. Check this performance comparison. One of the best splitters around is DelimitedSplit8K, created by Jeff Moden. You can read more about it here
Splitter with PIVOT
DECLARE #tbl1 TABLE (Value INT,String VARCHAR(MAX))
INSERT INTO #tbl1 VALUES(1,'Cleo, Smith');
INSERT INTO #tbl1 VALUES(2,'John, Mathew');
SELECT t3.Value,[1] as Fname,[2] as Lname
FROM #tbl1 as t1
CROSS APPLY [dbo].[DelimitedSplit8K](String,',') as t2
PIVOT(MAX(Item) FOR ItemNumber IN ([1],[2])) as t3
Output
Value Fname Lname
1 Cleo Smith
2 John Mathew
DelimitedSplit8K by Jeff Moden
CREATE FUNCTION [dbo].[DelimitedSplit8K]
/**********************************************************************************************************************
Purpose:
Split a given string at a given delimiter and return a list of the split elements (items).
Notes:
1. Leading a trailing delimiters are treated as if an empty string element were present.
2. Consecutive delimiters are treated as if an empty string element were present between them.
3. Except when spaces are used as a delimiter, all spaces present in each element are preserved.
Returns:
iTVF containing the following:
ItemNumber = Element position of Item as a BIGINT (not converted to INT to eliminate a CAST)
Item = Element value as a VARCHAR(8000)
Statistics on this function may be found at the following URL:
http://www.sqlservercentral.com/Forums/Topic1101315-203-4.aspx
CROSS APPLY Usage Examples and Tests:
--=====================================================================================================================
-- TEST 1:
-- This tests for various possible conditions in a string using a comma as the delimiter. The expected results are
-- laid out in the comments
--=====================================================================================================================
--===== Conditionally drop the test tables to make reruns easier for testing.
-- (this is NOT a part of the solution)
IF OBJECT_ID('tempdb..#JBMTest') IS NOT NULL DROP TABLE #JBMTest
;
--===== Create and populate a test table on the fly (this is NOT a part of the solution).
-- In the following comments, "b" is a blank and "E" is an element in the left to right order.
-- Double Quotes are used to encapsulate the output of "Item" so that you can see that all blanks
-- are preserved no matter where they may appear.
SELECT *
INTO #JBMTest
FROM ( --# & type of Return Row(s)
SELECT 0, NULL UNION ALL --1 NULL
SELECT 1, SPACE(0) UNION ALL --1 b (Empty String)
SELECT 2, SPACE(1) UNION ALL --1 b (1 space)
SELECT 3, SPACE(5) UNION ALL --1 b (5 spaces)
SELECT 4, ',' UNION ALL --2 b b (both are empty strings)
SELECT 5, '55555' UNION ALL --1 E
SELECT 6, ',55555' UNION ALL --2 b E
SELECT 7, ',55555,' UNION ALL --3 b E b
SELECT 8, '55555,' UNION ALL --2 b B
SELECT 9, '55555,1' UNION ALL --2 E E
SELECT 10, '1,55555' UNION ALL --2 E E
SELECT 11, '55555,4444,333,22,1' UNION ALL --5 E E E E E
SELECT 12, '55555,4444,,333,22,1' UNION ALL --6 E E b E E E
SELECT 13, ',55555,4444,,333,22,1,' UNION ALL --8 b E E b E E E b
SELECT 14, ',55555,4444,,,333,22,1,' UNION ALL --9 b E E b b E E E b
SELECT 15, ' 4444,55555 ' UNION ALL --2 E (w/Leading Space) E (w/Trailing Space)
SELECT 16, 'This,is,a,test.' --E E E E
) d (SomeID, SomeValue)
;
--===== Split the CSV column for the whole table using CROSS APPLY (this is the solution)
SELECT test.SomeID, test.SomeValue, split.ItemNumber, Item = QUOTENAME(split.Item,'"')
FROM #JBMTest test
CROSS APPLY dbo.DelimitedSplit8K(test.SomeValue,',') split
;
--=====================================================================================================================
-- TEST 2:
-- This tests for various "alpha" splits and COLLATION using all ASCII characters from 0 to 255 as a delimiter against
-- a given string. Note that not all of the delimiters will be visible and some will show up as tiny squares because
-- they are "control" characters. More specifically, this test will show you what happens to various non-accented
-- letters for your given collation depending on the delimiter you chose.
--=====================================================================================================================
WITH
cteBuildAllCharacters (String,Delimiter) AS
(
SELECT TOP 256
'ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789',
CHAR(ROW_NUMBER() OVER (ORDER BY (SELECT NULL))-1)
FROM master.sys.all_columns
)
SELECT ASCII_Value = ASCII(c.Delimiter), c.Delimiter, split.ItemNumber, Item = QUOTENAME(split.Item,'"')
FROM cteBuildAllCharacters c
CROSS APPLY dbo.DelimitedSplit8K(c.String,c.Delimiter) split
ORDER BY ASCII_Value, split.ItemNumber
;
-----------------------------------------------------------------------------------------------------------------------
Other Notes:
1. Optimized for VARCHAR(8000) or less. No testing or error reporting for truncation at 8000 characters is done.
2. Optimized for single character delimiter. Multi-character delimiters should be resolvedexternally from this
function.
3. Optimized for use with CROSS APPLY.
4. Does not "trim" elements just in case leading or trailing blanks are intended.
5. If you don't know how a Tally table can be used to replace loops, please see the following...
http://www.sqlservercentral.com/articles/T-SQL/62867/
6. Changing this function to use NVARCHAR(MAX) will cause it to run twice as slow. It's just the nature of
VARCHAR(MAX) whether it fits in-row or not.
7. Multi-machine testing for the method of using UNPIVOT instead of 10 SELECT/UNION ALLs shows that the UNPIVOT method
is quite machine dependent and can slow things down quite a bit.
-----------------------------------------------------------------------------------------------------------------------
Credits:
This code is the product of many people's efforts including but not limited to the following:
cteTally concept originally by Iztek Ben Gan and "decimalized" by Lynn Pettis (and others) for a bit of extra speed
and finally redacted by Jeff Moden for a different slant on readability and compactness. Hat's off to Paul White for
his simple explanations of CROSS APPLY and for his detailed testing efforts. Last but not least, thanks to
Ron "BitBucket" McCullough and Wayne Sheffield for their extreme performance testing across multiple machines and
versions of SQL Server. The latest improvement brought an additional 15-20% improvement over Rev 05. Special thanks
to "Nadrek" and "peter-757102" (aka Peter de Heer) for bringing such improvements to light. Nadrek's original
improvement brought about a 10% performance gain and Peter followed that up with the content of Rev 07.
I also thank whoever wrote the first article I ever saw on "numbers tables" which is located at the following URL
and to Adam Machanic for leading me to it many years ago.
http://sqlserver2000.databases.aspfaq.com/why-should-i-consider-using-an-auxiliary-numbers-table.html
-----------------------------------------------------------------------------------------------------------------------
Revision History:
Rev 00 - 20 Jan 2010 - Concept for inline cteTally: Lynn Pettis and others.
Redaction/Implementation: Jeff Moden
- Base 10 redaction and reduction for CTE. (Total rewrite)
Rev 01 - 13 Mar 2010 - Jeff Moden
- Removed one additional concatenation and one subtraction from the SUBSTRING in the SELECT List for that tiny
bit of extra speed.
Rev 02 - 14 Apr 2010 - Jeff Moden
- No code changes. Added CROSS APPLY usage example to the header, some additional credits, and extra
documentation.
Rev 03 - 18 Apr 2010 - Jeff Moden
- No code changes. Added notes 7, 8, and 9 about certain "optimizations" that don't actually work for this
type of function.
Rev 04 - 29 Jun 2010 - Jeff Moden
- Added WITH SCHEMABINDING thanks to a note by Paul White. This prevents an unnecessary "Table Spool" when the
function is used in an UPDATE statement even though the function makes no external references.
Rev 05 - 02 Apr 2011 - Jeff Moden
- Rewritten for extreme performance improvement especially for larger strings approaching the 8K boundary and
for strings that have wider elements. The redaction of this code involved removing ALL concatenation of
delimiters, optimization of the maximum "N" value by using TOP instead of including it in the WHERE clause,
and the reduction of all previous calculations (thanks to the switch to a "zero based" cteTally) to just one
instance of one add and one instance of a subtract. The length calculation for the final element (not
followed by a delimiter) in the string to be split has been greatly simplified by using the ISNULL/NULLIF
combination to determine when the CHARINDEX returned a 0 which indicates there are no more delimiters to be
had or to start with. Depending on the width of the elements, this code is between 4 and 8 times faster on a
single CPU box than the original code especially near the 8K boundary.
- Modified comments to include more sanity checks on the usage example, etc.
- Removed "other" notes 8 and 9 as they were no longer applicable.
Rev 06 - 12 Apr 2011 - Jeff Moden
- Based on a suggestion by Ron "Bitbucket" McCullough, additional test rows were added to the sample code and
the code was changed to encapsulate the output in pipes so that spaces and empty strings could be perceived
in the output. The first "Notes" section was added. Finally, an extra test was added to the comments above.
Rev 07 - 06 May 2011 - Peter de Heer, a further 15-20% performance enhancement has been discovered and incorporated
into this code which also eliminated the need for a "zero" position in the cteTally table.
**********************************************************************************************************************/
--===== Define I/O parameters
(#pString VARCHAR(8000), #pDelimiter CHAR(1))
RETURNS TABLE WITH SCHEMABINDING AS
RETURN
--===== "Inline" CTE Driven "Tally Table" produces values from 0 up to 10,000...
-- enough to cover NVARCHAR(4000)
WITH E1(N) AS (
SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1 UNION ALL
SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1 UNION ALL
SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1
), --10E+1 or 10 rows
E2(N) AS (SELECT 1 FROM E1 a, E1 b), --10E+2 or 100 rows
E4(N) AS (SELECT 1 FROM E2 a, E2 b), --10E+4 or 10,000 rows max
cteTally(N) AS (--==== This provides the "base" CTE and limits the number of rows right up front
-- for both a performance gain and prevention of accidental "overruns"
SELECT TOP (ISNULL(DATALENGTH(#pString),0)) ROW_NUMBER() OVER (ORDER BY (SELECT NULL)) FROM E4
),
cteStart(N1) AS (--==== This returns N+1 (starting position of each "element" just once for each delimiter)
SELECT 1 UNION ALL
SELECT t.N+1 FROM cteTally t WHERE SUBSTRING(#pString,t.N,1) = #pDelimiter
),
cteLen(N1,L1) AS(--==== Return start and length (for use in substring)
SELECT s.N1,
ISNULL(NULLIF(CHARINDEX(#pDelimiter,#pString,s.N1),0)-s.N1,8000)
FROM cteStart s
)
--===== Do the actual split. The ISNULL/NULLIF combo handles the length for the final element when no delimiter is found.
SELECT ItemNumber = ROW_NUMBER() OVER(ORDER BY l.N1),
Item = SUBSTRING(#pString, l.N1, l.L1)
FROM cteLen l
;
GO
With SQL Server 2016 we can use string_split to accomplish this:
create table commasep (
id int identity(1,1)
,string nvarchar(100) )
insert into commasep (string) values ('John, Adam'), ('test1,test2,test3')
select id, [value] as String from commasep
cross apply string_split(string,',')
CREATE FUNCTION [dbo].[fn_split_string_to_column] (
#string NVARCHAR(MAX),
#delimiter CHAR(1)
)
RETURNS #out_put TABLE (
[column_id] INT IDENTITY(1, 1) NOT NULL,
[value] NVARCHAR(MAX)
)
AS
BEGIN
DECLARE #value NVARCHAR(MAX),
#pos INT = 0,
#len INT = 0
SET #string = CASE
WHEN RIGHT(#string, 1) != #delimiter
THEN #string + #delimiter
ELSE #string
END
WHILE CHARINDEX(#delimiter, #string, #pos + 1) > 0
BEGIN
SET #len = CHARINDEX(#delimiter, #string, #pos + 1) - #pos
SET #value = SUBSTRING(#string, #pos, #len)
INSERT INTO #out_put ([value])
SELECT LTRIM(RTRIM(#value)) AS [column]
SET #pos = CHARINDEX(#delimiter, #string, #pos + #len) + 1
END
RETURN
END
SELECT id,
Substring(NAME, 0, Charindex(',', NAME)) AS firstname,
Substring(NAME, Charindex(',', NAME), Len(NAME) + 1) AS lastname
FROM spilt
Try this (change instances of ' ' to ',' or whatever delimiter you want to use)
CREATE FUNCTION dbo.Wordparser
(
#multiwordstring VARCHAR(255),
#wordnumber NUMERIC
)
returns VARCHAR(255)
AS
BEGIN
DECLARE #remainingstring VARCHAR(255)
SET #remainingstring=#multiwordstring
DECLARE #numberofwords NUMERIC
SET #numberofwords=(LEN(#remainingstring) - LEN(REPLACE(#remainingstring, ' ', '')) + 1)
DECLARE #word VARCHAR(50)
DECLARE #parsedwords TABLE
(
line NUMERIC IDENTITY(1, 1),
word VARCHAR(255)
)
WHILE #numberofwords > 1
BEGIN
SET #word=LEFT(#remainingstring, CHARINDEX(' ', #remainingstring) - 1)
INSERT INTO #parsedwords(word)
SELECT #word
SET #remainingstring= REPLACE(#remainingstring, Concat(#word, ' '), '')
SET #numberofwords=(LEN(#remainingstring) - LEN(REPLACE(#remainingstring, ' ', '')) + 1)
IF #numberofwords = 1
BREAK
ELSE
CONTINUE
END
IF #numberofwords = 1
SELECT #word = #remainingstring
INSERT INTO #parsedwords(word)
SELECT #word
RETURN
(SELECT word
FROM #parsedwords
WHERE line = #wordnumber)
END
Example usage:
SELECT dbo.Wordparser(COLUMN, 1),
dbo.Wordparser(COLUMN, 2),
dbo.Wordparser(COLUMN, 3)
FROM TABLE
I think PARSENAME is the neat function to use for this example, as described in this article: http://www.sqlshack.com/parsing-and-rotating-delimited-data-in-sql-server-2012/
The PARSENAME function is logically designed to parse four-part object names. The nice thing about PARSENAME is that it’s not limited to parsing just SQL Server four-part object names – it will parse any function or string data that is delimited by dots.
The first parameter is the object to parse, and the second is the integer value of the object piece to return. The article is discussing parsing and rotating delimited data - company phone numbers, but it can be used to parse name/surname data also.
Example:
USE COMPANY;
SELECT PARSENAME('Whatever.you.want.parsed',3) AS 'ReturnValue';
The article also describes using a Common Table Expression (CTE) called ‘replaceChars’, to run PARSENAME against the delimiter-replaced values. A CTE is useful for returning a temporary view or result set.
After that, the UNPIVOT function has been used to convert some columns into rows; SUBSTRING and CHARINDEX functions have been used for cleaning up the inconsistencies in the data, and the LAG function (new for SQL Server 2012) has been used in the end, as it allows referencing of previous records.
We can create a function as this
CREATE Function [dbo].[fn_CSVToTable]
(
#CSVList Varchar(max)
)
RETURNS #Table TABLE (ColumnData VARCHAR(100))
AS
BEGIN
IF RIGHT(#CSVList, 1) <> ','
SELECT #CSVList = #CSVList + ','
DECLARE #Pos BIGINT,
#OldPos BIGINT
SELECT #Pos = 1,
#OldPos = 1
WHILE #Pos < LEN(#CSVList)
BEGIN
SELECT #Pos = CHARINDEX(',', #CSVList, #OldPos)
INSERT INTO #Table
SELECT LTRIM(RTRIM(SUBSTRING(#CSVList, #OldPos, #Pos - #OldPos))) Col001
SELECT #OldPos = #Pos + 1
END
RETURN
END
We can then seperate the CSV values into our respective columns using a SELECT statement
You can use a table-valued function STRING_SPLIT, which is available only under compatibility level 130. If your database compatibility level is lower than 130, SQL Server will not be able to find and execute the STRING_SPLIT function. You can change a compatibility level of the database using the following command:
ALTER DATABASE DatabaseName SET COMPATIBILITY_LEVEL = 130
Syntax
SELECT * FROM STRING_SPLIT ( string, separator )
see documentation here
I think following function will work for you:
You have to create a function in SQL first. Like this
CREATE FUNCTION [dbo].[fn_split](
#str VARCHAR(MAX),
#delimiter CHAR(1)
)
RETURNS #returnTable TABLE (idx INT PRIMARY KEY IDENTITY, item VARCHAR(8000))
AS
BEGIN
DECLARE #pos INT
SELECT #str = #str + #delimiter
WHILE LEN(#str) > 0
BEGIN
SELECT #pos = CHARINDEX(#delimiter,#str)
IF #pos = 1
INSERT #returnTable (item)
VALUES (NULL)
ELSE
INSERT #returnTable (item)
VALUES (SUBSTRING(#str, 1, #pos-1))
SELECT #str = SUBSTRING(#str, #pos+1, LEN(#str)-#pos)
END
RETURN
END
You can call this function, like this:
select * from fn_split('1,24,5',',')
Implementation:
Declare #test TABLE (
ID VARCHAR(200),
Data VARCHAR(200)
)
insert into #test
(ID, Data)
Values
('1','Cleo,Smith')
insert into #test
(ID, Data)
Values
('2','Paul,Grim')
select ID,
(select item from fn_split(Data,',') where idx in (1)) as Name ,
(select item from fn_split(Data,',') where idx in (2)) as Surname
from #test
Result will like this:
Use Parsename() function
with cte as(
select 'Aria,Karimi' as FullName
Union
select 'Joe,Karimi' as FullName
Union
select 'Bab,Karimi' as FullName
)
SELECT PARSENAME(REPLACE(FullName,',','.'),2) as Name,
PARSENAME(REPLACE(FullName,',','.'),1) as Family
FROM cte
Result
Name Family
----- ------
Aria Karimi
Bab Karimi
Joe Karimi
Try this:
declare #csv varchar(100) ='aaa,bb,csda,daass';
set #csv = #csv+',';
with cte as
(
select SUBSTRING(#csv,1,charindex(',',#csv,1)-1) as val, SUBSTRING(#csv,charindex(',',#csv,1)+1,len(#csv)) as rem
UNION ALL
select SUBSTRING(a.rem,1,charindex(',',a.rem,1)-1)as val, SUBSTRING(a.rem,charindex(',',a.rem,1)+1,len(A.rem))
from cte a where LEN(a.rem)>=1
) select val from cte
This function is most fast:
CREATE FUNCTION dbo.F_ExtractSubString
(
#String VARCHAR(MAX),
#NroSubString INT,
#Separator VARCHAR(5)
)
RETURNS VARCHAR(MAX) AS
BEGIN
DECLARE #St INT = 0, #End INT = 0, #Ret VARCHAR(MAX)
SET #String = #String + #Separator
WHILE CHARINDEX(#Separator, #String, #End + 1) > 0 AND #NroSubString > 0
BEGIN
SET #St = #End + 1
SET #End = CHARINDEX(#Separator, #String, #End + 1)
SET #NroSubString = #NroSubString - 1
END
IF #NroSubString > 0
SET #Ret = ''
ELSE
SET #Ret = SUBSTRING(#String, #St, #End - #St)
RETURN #Ret
END
GO
Example usage:
SELECT dbo.F_ExtractSubString(COLUMN, 1, ', '),
dbo.F_ExtractSubString(COLUMN, 2, ', '),
dbo.F_ExtractSubString(COLUMN, 3, ', ')
FROM TABLE
I encountered a similar problem but a complex one and since this is the first thread i found regarding that issue i decided to post my finding. i know it is complex solution to a simple problem but i hope that i could help other people who go to this thread looking for a more complex solution. i had to split a string containing 5 numbers (column name: levelsFeed) and to show each number in a separate column.
for example: 8,1,2,2,2
should be shown as :
1 2 3 4 5
-------------
8 1 2 2 2
Solution 1: using XML functions:
this solution for the slowest solution by far
SELECT Distinct FeedbackID,
, S.a.value('(/H/r)[1]', 'INT') AS level1
, S.a.value('(/H/r)[2]', 'INT') AS level2
, S.a.value('(/H/r)[3]', 'INT') AS level3
, S.a.value('(/H/r)[4]', 'INT') AS level4
, S.a.value('(/H/r)[5]', 'INT') AS level5
FROM (
SELECT *,CAST (N'<H><r>' + REPLACE(levelsFeed, ',', '</r><r>') + '</r> </H>' AS XML) AS [vals]
FROM Feedbacks
) as d
CROSS APPLY d.[vals].nodes('/H/r') S(a)
Solution 2: using Split function and pivot. (the split function split a string to rows with the column name Data)
SELECT FeedbackID, [1],[2],[3],[4],[5]
FROM (
SELECT *, ROW_NUMBER() OVER (PARTITION BY feedbackID ORDER BY (SELECT null)) as rn
FROM (
SELECT FeedbackID, levelsFeed
FROM Feedbacks
) as a
CROSS APPLY dbo.Split(levelsFeed, ',')
) as SourceTable
PIVOT
(
MAX(data)
FOR rn IN ([1],[2],[3],[4],[5])
)as pivotTable
Solution 3: using string manipulations functions - fastest by small margin over solution 2
SELECT FeedbackID,
SUBSTRING(levelsFeed,0,CHARINDEX(',',levelsFeed)) AS level1,
PARSENAME(REPLACE(SUBSTRING(levelsFeed,CHARINDEX(',',levelsFeed)+1,LEN(levelsFeed)),',','.'),4) AS level2,
PARSENAME(REPLACE(SUBSTRING(levelsFeed,CHARINDEX(',',levelsFeed)+1,LEN(levelsFeed)),',','.'),3) AS level3,
PARSENAME(REPLACE(SUBSTRING(levelsFeed,CHARINDEX(',',levelsFeed)+1,LEN(levelsFeed)),',','.'),2) AS level4,
PARSENAME(REPLACE(SUBSTRING(levelsFeed,CHARINDEX(',',levelsFeed)+1,LEN(levelsFeed)),',','.'),1) AS level5
FROM Feedbacks
since the levelsFeed contains 5 string values i needed to use the substring function for the first string.
i hope that my solution will help other that got to this thread looking for a more complex split to columns methods
Using instring function :)
select Value,
substring(String,1,instr(String," ") -1) Fname,
substring(String,instr(String,",") +1) Sname
from tablename;
Used two functions,
1. substring(string, position, length) ==> returns string from positon to length
2. instr(string,pattern) ==> returns position of pattern.
If we don’t provide length argument in substring it returns until end of string
This worked for me
CREATE FUNCTION [dbo].[SplitString](
#delimited NVARCHAR(MAX),
#delimiter NVARCHAR(100)
) RETURNS #t TABLE ( val NVARCHAR(MAX))
AS
BEGIN
DECLARE #xml XML
SET #xml = N'<t>' + REPLACE(#delimited,#delimiter,'</t><t>') + '</t>'
INSERT INTO #t(val)
SELECT r.value('.','varchar(MAX)') as item
FROM #xml.nodes('/t') as records(r)
RETURN
END
mytable:
Value ColOne
--------------------
1 Cleo, Smith
The following should work if there aren't too many columns
ALTER TABLE mytable ADD ColTwo nvarchar(256);
UPDATE mytable SET ColTwo = LEFT(ColOne, Charindex(',', ColOne) - 1);
--'Cleo' = LEFT('Cleo, Smith', Charindex(',', 'Cleo, Smith') - 1)
UPDATE mytable SET ColTwo = REPLACE(ColOne, ColTwo + ',', '');
--' Smith' = REPLACE('Cleo, Smith', 'Cleo' + ',')
UPDATE mytable SET ColOne = REPLACE(ColOne, ',' + ColTwo, ''), ColTwo = LTRIM(ColTwo);
--'Cleo' = REPLACE('Cleo, Smith', ',' + ' Smith', '')
Result:
Value ColOne ColTwo
--------------------
1 Cleo Smith
DECLARE #INPUT VARCHAR (MAX)='N,A,R,E,N,D,R,A'
DECLARE #ELIMINATE_CHAR CHAR (1)=','
DECLARE #L_START INT=1
DECLARE #L_END INT=(SELECT LEN (#INPUT))
DECLARE #OUTPUT CHAR (1)
WHILE #L_START <=#L_END
BEGIN
SET #OUTPUT=(SUBSTRING (#INPUT,#L_START,1))
IF #OUTPUT!=#ELIMINATE_CHAR
BEGIN
PRINT #OUTPUT
END
SET #L_START=#L_START+1
END
You may find the solution in SQL User Defined Function to Parse a Delimited String helpful (from The Code Project).
This is the code part from this page:
CREATE FUNCTION [fn_ParseText2Table]
(#p_SourceText VARCHAR(MAX)
,#p_Delimeter VARCHAR(100)=',' --default to comma delimited.
)
RETURNS #retTable
TABLE([Position] INT IDENTITY(1,1)
,[Int_Value] INT
,[Num_Value] NUMERIC(18,3)
,[Txt_Value] VARCHAR(MAX)
,[Date_value] DATETIME
)
AS
/*
********************************************************************************
Purpose: Parse values from a delimited string
& return the result as an indexed table
Copyright 1996, 1997, 2000, 2003 Clayton Groom (Clayton_Groom#hotmail.com)
Posted to the public domain Aug, 2004
2003-06-17 Rewritten as SQL 2000 function.
Reworked to allow for delimiters > 1 character in length
and to convert Text values to numbers
2016-04-05 Added logic for date values based on "new" ISDATE() function, Updated to use XML approach, which is more efficient.
********************************************************************************
*/
BEGIN
DECLARE #w_xml xml;
SET #w_xml = N'<root><i>' + replace(#p_SourceText, #p_Delimeter,'</i><i>') + '</i></root>';
INSERT INTO #retTable
([Int_Value]
, [Num_Value]
, [Txt_Value]
, [Date_value]
)
SELECT CASE
WHEN ISNUMERIC([i].value('.', 'VARCHAR(MAX)')) = 1
THEN CAST(CAST([i].value('.', 'VARCHAR(MAX)') AS NUMERIC) AS INT)
END AS [Int_Value]
, CASE
WHEN ISNUMERIC([i].value('.', 'VARCHAR(MAX)')) = 1
THEN CAST([i].value('.', 'VARCHAR(MAX)') AS NUMERIC(18, 3))
END AS [Num_Value]
, [i].value('.', 'VARCHAR(MAX)') AS [txt_Value]
, CASE
WHEN ISDATE([i].value('.', 'VARCHAR(MAX)')) = 1
THEN CAST([i].value('.', 'VARCHAR(MAX)') AS DATETIME)
END AS [Num_Value]
FROM #w_xml.nodes('//root/i') AS [Items]([i]);
RETURN;
END;
GO
ALTER function get_occurance_index(#delimiter varchar(1),#occurence int,#String varchar(100))
returns int
AS Begin
--Declare #delimiter varchar(1)=',',#occurence int=2,#String varchar(100)='a,b,c'
Declare #result int
;with T as (
select 1 Rno,0 as row, charindex(#delimiter, #String) pos,#String st
union all
select Rno+1,pos + 1, charindex(#delimiter, #String, pos + 1), #String
from T
where pos > 0
)
select #result=pos
from T
where pos > 0 and rno = #occurence
return isnull(#result,0)
ENd
declare #data as table (data varchar(100))
insert into #data values('1,2,3')
insert into #data values('aaa,bbbbb,cccc')
select top 3 Substring (data,0,dbo.get_occurance_index( ',',1,data)) ,--First Record always starts with 0
Substring (data,dbo.get_occurance_index( ',',1,data)+1,dbo.get_occurance_index( ',',2,data)-dbo.get_occurance_index( ',',1,data)-1) ,
Substring (data,dbo.get_occurance_index( ',',2,data)+1,len(data)) , -- Last record cant be more than len of actual data
data
From #data
I found that using PARSENAME as above caused any name with a period to get nulled.
So if there was an initial or a title in the name followed by a dot they return NULL.
I found this worked for me:
SELECT
REPLACE(SUBSTRING(FullName, 1,CHARINDEX(',', FullName)), ',','') as Name,
REPLACE(SUBSTRING(FullName, CHARINDEX(',', FullName), LEN(FullName)), ',', '') as Surname
FROM Table1
it is so easy, you can take it by below query:
DECLARE #str NVARCHAR(MAX)='ControlID_05436b78-04ba-9667-fa01-9ff8c1b7c235,3'
SELECT LEFT(#str, CHARINDEX(',',#str)-1),RIGHT(#str,LEN(#str)-(CHARINDEX(',',#str)))
select distinct modelFileId,F4.*
from contract
cross apply (select XmlList=convert(xml, '<x>'+replace(modelFileId,';','</x><x>')+'</x>').query('.')) F2
cross apply (select mfid1=XmlNode.value('/x[1]','varchar(512)')
,mfid2=XmlNode.value('/x[2]','varchar(512)')
,mfid3=XmlNode.value('/x[3]','varchar(512)')
,mfid4=XmlNode.value('/x[4]','varchar(512)') from XmlList.nodes('x') F3(XmlNode)) F4
where modelFileId like '%;%'
order by modelFileId
Select distinct PROJ_UID,PROJ_NAME,RES_UID from E2E_ProjectWiseTimesheetActuals
where CHARINDEX(','+cast(PROJ_UID as varchar(8000))+',', #params) > 0 and CHARINDEX(','+cast(RES_UID as varchar(8000))+',', #res) > 0
I re-wrote an answer above and made it better:
CREATE FUNCTION [dbo].[CSVParser]
(
#s VARCHAR(255),
#idx NUMERIC
)
RETURNS VARCHAR(12)
BEGIN
DECLARE #comma int
SET #comma = CHARINDEX(',', #s)
WHILE 1=1
BEGIN
IF #comma=0
IF #idx=1
RETURN #s
ELSE
RETURN ''
IF #idx=1
BEGIN
DECLARE #word VARCHAR(12)
SET #word=LEFT(#s, #comma - 1)
RETURN #word
END
SET #s = RIGHT(#s,LEN(#s)-#comma)
SET #comma = CHARINDEX(',', #s)
SET #idx = #idx - 1
END
RETURN 'not used'
END
Example usage:
SELECT dbo.CSVParser(COLUMN, 1),
dbo.CSVParser(COLUMN, 2),
dbo.CSVParser(COLUMN, 3)
FROM TABLE
question is simple, but problem is hot :)
So I create some wrapper for string_split() which pivot result in more generic way. It's table function which returns values (nn, value1, value2, ... , value50) - enough for most CSV lines. If there are more values, they will wrap to next line - nn indicate line number. Set third parameter #columnCnt = [yourNumber] to wrap at specific position:
alter FUNCTION fn_Split50
(
#str varchar(max),
#delim char(1),
#columnCnt int = 50
)
RETURNS TABLE
AS
RETURN
(
SELECT *
FROM (SELECT
nn = (nn - 1) / #columnCnt + 1,
nnn = 'value' + cast(((nn - 1) % #columnCnt) + 1 as varchar(10)),
value
FROM (SELECT
nn = ROW_NUMBER() over (order by (select null)),
value
FROM string_split(#str, #delim) aa
) aa
where nn > 0
) bb
PIVOT
(
max(value)
FOR nnn IN (
value1, value2, value3, value4, value5, value6, value7, value8, value9, value10,
value11, value12, value13, value14, value15, value16, value17, value18, value19, value20,
value21, value22, value23, value24, value25, value26, value27, value28, value29, value30,
value31, value32, value33, value34, value35, value36, value37, value38, value39, value40,
value41, value42, value43, value44, value45, value46, value47, value48, value49, value50
)
) AS PivotTable
)
Example of using:
select * from dbo.fn_split50('zz1,aa2,ss3,dd4,ff5', ',', DEFAULT)
select * from dbo.fn_split50('zz1,aa2,ss3,dd4,ff5,gg6,hh7,jj8,ww9,qq10', ',', 3)
select * from dbo.fn_split50('zz1,11,aa2,22,ss3,33,dd4,44,ff5,55,gg6,66,hh7,77,jj8,88,ww9,99,qq10,1010', ',',2)
Hope, it will helps :)

Splitting SQL columns by delimiter in SQL Server 12 [duplicate]

I have a table like this
Value String
-------------------
1 Cleo, Smith
I want to separate the comma delimited string into two columns
Value Name Surname
-------------------
1 Cleo Smith
I need only two fixed extra columns
Your purpose can be solved using following query -
Select Value , Substring(FullName, 1,Charindex(',', FullName)-1) as Name,
Substring(FullName, Charindex(',', FullName)+1, LEN(FullName)) as Surname
from Table1
There is no readymade Split function in sql server, so we need to create user defined function.
CREATE FUNCTION Split (
#InputString VARCHAR(8000),
#Delimiter VARCHAR(50)
)
RETURNS #Items TABLE (
Item VARCHAR(8000)
)
AS
BEGIN
IF #Delimiter = ' '
BEGIN
SET #Delimiter = ','
SET #InputString = REPLACE(#InputString, ' ', #Delimiter)
END
IF (#Delimiter IS NULL OR #Delimiter = '')
SET #Delimiter = ','
--INSERT INTO #Items VALUES (#Delimiter) -- Diagnostic
--INSERT INTO #Items VALUES (#InputString) -- Diagnostic
DECLARE #Item VARCHAR(8000)
DECLARE #ItemList VARCHAR(8000)
DECLARE #DelimIndex INT
SET #ItemList = #InputString
SET #DelimIndex = CHARINDEX(#Delimiter, #ItemList, 0)
WHILE (#DelimIndex != 0)
BEGIN
SET #Item = SUBSTRING(#ItemList, 0, #DelimIndex)
INSERT INTO #Items VALUES (#Item)
-- Set #ItemList = #ItemList minus one less item
SET #ItemList = SUBSTRING(#ItemList, #DelimIndex+1, LEN(#ItemList)-#DelimIndex)
SET #DelimIndex = CHARINDEX(#Delimiter, #ItemList, 0)
END -- End WHILE
IF #Item IS NOT NULL -- At least one delimiter was encountered in #InputString
BEGIN
SET #Item = #ItemList
INSERT INTO #Items VALUES (#Item)
END
-- No delimiters were encountered in #InputString, so just return #InputString
ELSE INSERT INTO #Items VALUES (#InputString)
RETURN
END -- End Function
GO
---- Set Permissions
--GRANT SELECT ON Split TO UserRole1
--GRANT SELECT ON Split TO UserRole2
--GO
;WITH Split_Names (Value,Name, xmlname)
AS
(
SELECT Value,
Name,
CONVERT(XML,'<Names><name>'
+ REPLACE(Name,',', '</name><name>') + '</name></Names>') AS xmlname
FROM tblnames
)
SELECT Value,
xmlname.value('/Names[1]/name[1]','varchar(100)') AS Name,
xmlname.value('/Names[1]/name[2]','varchar(100)') AS Surname
FROM Split_Names
and also check the link below for reference
http://jahaines.blogspot.in/2009/06/converting-delimited-string-of-values.html
xml based answer is simple and clean
refer this
DECLARE #S varchar(max),
#Split char(1),
#X xml
SELECT #S = 'ab,cd,ef,gh,ij',
#Split = ','
SELECT #X = CONVERT(xml,' <root> <myvalue>' +
REPLACE(#S,#Split,'</myvalue> <myvalue>') + '</myvalue> </root> ')
SELECT T.c.value('.','varchar(20)'), --retrieve ALL values at once
T.c.value('(/root/myvalue)[1]','VARCHAR(20)') , --retrieve index 1 only, which is the 'ab'
T.c.value('(/root/myvalue)[2]','VARCHAR(20)')
FROM #X.nodes('/root/myvalue') T(c)
I think this is cool
SELECT value,
PARSENAME(REPLACE(String,',','.'),2) 'Name' ,
PARSENAME(REPLACE(String,',','.'),1) 'Surname'
FROM table WITH (NOLOCK)
With CROSS APPLY
select ParsedData.*
from MyTable mt
cross apply ( select str = mt.String + ',,' ) f1
cross apply ( select p1 = charindex( ',', str ) ) ap1
cross apply ( select p2 = charindex( ',', str, p1 + 1 ) ) ap2
cross apply ( select Nmame = substring( str, 1, p1-1 )
, Surname = substring( str, p1+1, p2-p1-1 )
) ParsedData
There are multiple ways to solve this and many different ways have been proposed already. Simplest would be to use LEFT / SUBSTRING and other string functions to achieve the desired result.
Sample Data
DECLARE #tbl1 TABLE (Value INT,String VARCHAR(MAX))
INSERT INTO #tbl1 VALUES(1,'Cleo, Smith');
INSERT INTO #tbl1 VALUES(2,'John, Mathew');
Using String Functions like LEFT
SELECT
Value,
LEFT(String,CHARINDEX(',',String)-1) as Fname,
LTRIM(RIGHT(String,LEN(String) - CHARINDEX(',',String) )) AS Lname
FROM #tbl1
This approach fails if there are more 2 items in a String.
In such a scenario, we can use a splitter and then use PIVOT or convert the string into an XML and use .nodes to get string items. XML based solution have been detailed out by aads and bvr in their solution.
The answers for this question which use splitter, all use WHILE which is inefficient for splitting. Check this performance comparison. One of the best splitters around is DelimitedSplit8K, created by Jeff Moden. You can read more about it here
Splitter with PIVOT
DECLARE #tbl1 TABLE (Value INT,String VARCHAR(MAX))
INSERT INTO #tbl1 VALUES(1,'Cleo, Smith');
INSERT INTO #tbl1 VALUES(2,'John, Mathew');
SELECT t3.Value,[1] as Fname,[2] as Lname
FROM #tbl1 as t1
CROSS APPLY [dbo].[DelimitedSplit8K](String,',') as t2
PIVOT(MAX(Item) FOR ItemNumber IN ([1],[2])) as t3
Output
Value Fname Lname
1 Cleo Smith
2 John Mathew
DelimitedSplit8K by Jeff Moden
CREATE FUNCTION [dbo].[DelimitedSplit8K]
/**********************************************************************************************************************
Purpose:
Split a given string at a given delimiter and return a list of the split elements (items).
Notes:
1. Leading a trailing delimiters are treated as if an empty string element were present.
2. Consecutive delimiters are treated as if an empty string element were present between them.
3. Except when spaces are used as a delimiter, all spaces present in each element are preserved.
Returns:
iTVF containing the following:
ItemNumber = Element position of Item as a BIGINT (not converted to INT to eliminate a CAST)
Item = Element value as a VARCHAR(8000)
Statistics on this function may be found at the following URL:
http://www.sqlservercentral.com/Forums/Topic1101315-203-4.aspx
CROSS APPLY Usage Examples and Tests:
--=====================================================================================================================
-- TEST 1:
-- This tests for various possible conditions in a string using a comma as the delimiter. The expected results are
-- laid out in the comments
--=====================================================================================================================
--===== Conditionally drop the test tables to make reruns easier for testing.
-- (this is NOT a part of the solution)
IF OBJECT_ID('tempdb..#JBMTest') IS NOT NULL DROP TABLE #JBMTest
;
--===== Create and populate a test table on the fly (this is NOT a part of the solution).
-- In the following comments, "b" is a blank and "E" is an element in the left to right order.
-- Double Quotes are used to encapsulate the output of "Item" so that you can see that all blanks
-- are preserved no matter where they may appear.
SELECT *
INTO #JBMTest
FROM ( --# & type of Return Row(s)
SELECT 0, NULL UNION ALL --1 NULL
SELECT 1, SPACE(0) UNION ALL --1 b (Empty String)
SELECT 2, SPACE(1) UNION ALL --1 b (1 space)
SELECT 3, SPACE(5) UNION ALL --1 b (5 spaces)
SELECT 4, ',' UNION ALL --2 b b (both are empty strings)
SELECT 5, '55555' UNION ALL --1 E
SELECT 6, ',55555' UNION ALL --2 b E
SELECT 7, ',55555,' UNION ALL --3 b E b
SELECT 8, '55555,' UNION ALL --2 b B
SELECT 9, '55555,1' UNION ALL --2 E E
SELECT 10, '1,55555' UNION ALL --2 E E
SELECT 11, '55555,4444,333,22,1' UNION ALL --5 E E E E E
SELECT 12, '55555,4444,,333,22,1' UNION ALL --6 E E b E E E
SELECT 13, ',55555,4444,,333,22,1,' UNION ALL --8 b E E b E E E b
SELECT 14, ',55555,4444,,,333,22,1,' UNION ALL --9 b E E b b E E E b
SELECT 15, ' 4444,55555 ' UNION ALL --2 E (w/Leading Space) E (w/Trailing Space)
SELECT 16, 'This,is,a,test.' --E E E E
) d (SomeID, SomeValue)
;
--===== Split the CSV column for the whole table using CROSS APPLY (this is the solution)
SELECT test.SomeID, test.SomeValue, split.ItemNumber, Item = QUOTENAME(split.Item,'"')
FROM #JBMTest test
CROSS APPLY dbo.DelimitedSplit8K(test.SomeValue,',') split
;
--=====================================================================================================================
-- TEST 2:
-- This tests for various "alpha" splits and COLLATION using all ASCII characters from 0 to 255 as a delimiter against
-- a given string. Note that not all of the delimiters will be visible and some will show up as tiny squares because
-- they are "control" characters. More specifically, this test will show you what happens to various non-accented
-- letters for your given collation depending on the delimiter you chose.
--=====================================================================================================================
WITH
cteBuildAllCharacters (String,Delimiter) AS
(
SELECT TOP 256
'ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789',
CHAR(ROW_NUMBER() OVER (ORDER BY (SELECT NULL))-1)
FROM master.sys.all_columns
)
SELECT ASCII_Value = ASCII(c.Delimiter), c.Delimiter, split.ItemNumber, Item = QUOTENAME(split.Item,'"')
FROM cteBuildAllCharacters c
CROSS APPLY dbo.DelimitedSplit8K(c.String,c.Delimiter) split
ORDER BY ASCII_Value, split.ItemNumber
;
-----------------------------------------------------------------------------------------------------------------------
Other Notes:
1. Optimized for VARCHAR(8000) or less. No testing or error reporting for truncation at 8000 characters is done.
2. Optimized for single character delimiter. Multi-character delimiters should be resolvedexternally from this
function.
3. Optimized for use with CROSS APPLY.
4. Does not "trim" elements just in case leading or trailing blanks are intended.
5. If you don't know how a Tally table can be used to replace loops, please see the following...
http://www.sqlservercentral.com/articles/T-SQL/62867/
6. Changing this function to use NVARCHAR(MAX) will cause it to run twice as slow. It's just the nature of
VARCHAR(MAX) whether it fits in-row or not.
7. Multi-machine testing for the method of using UNPIVOT instead of 10 SELECT/UNION ALLs shows that the UNPIVOT method
is quite machine dependent and can slow things down quite a bit.
-----------------------------------------------------------------------------------------------------------------------
Credits:
This code is the product of many people's efforts including but not limited to the following:
cteTally concept originally by Iztek Ben Gan and "decimalized" by Lynn Pettis (and others) for a bit of extra speed
and finally redacted by Jeff Moden for a different slant on readability and compactness. Hat's off to Paul White for
his simple explanations of CROSS APPLY and for his detailed testing efforts. Last but not least, thanks to
Ron "BitBucket" McCullough and Wayne Sheffield for their extreme performance testing across multiple machines and
versions of SQL Server. The latest improvement brought an additional 15-20% improvement over Rev 05. Special thanks
to "Nadrek" and "peter-757102" (aka Peter de Heer) for bringing such improvements to light. Nadrek's original
improvement brought about a 10% performance gain and Peter followed that up with the content of Rev 07.
I also thank whoever wrote the first article I ever saw on "numbers tables" which is located at the following URL
and to Adam Machanic for leading me to it many years ago.
http://sqlserver2000.databases.aspfaq.com/why-should-i-consider-using-an-auxiliary-numbers-table.html
-----------------------------------------------------------------------------------------------------------------------
Revision History:
Rev 00 - 20 Jan 2010 - Concept for inline cteTally: Lynn Pettis and others.
Redaction/Implementation: Jeff Moden
- Base 10 redaction and reduction for CTE. (Total rewrite)
Rev 01 - 13 Mar 2010 - Jeff Moden
- Removed one additional concatenation and one subtraction from the SUBSTRING in the SELECT List for that tiny
bit of extra speed.
Rev 02 - 14 Apr 2010 - Jeff Moden
- No code changes. Added CROSS APPLY usage example to the header, some additional credits, and extra
documentation.
Rev 03 - 18 Apr 2010 - Jeff Moden
- No code changes. Added notes 7, 8, and 9 about certain "optimizations" that don't actually work for this
type of function.
Rev 04 - 29 Jun 2010 - Jeff Moden
- Added WITH SCHEMABINDING thanks to a note by Paul White. This prevents an unnecessary "Table Spool" when the
function is used in an UPDATE statement even though the function makes no external references.
Rev 05 - 02 Apr 2011 - Jeff Moden
- Rewritten for extreme performance improvement especially for larger strings approaching the 8K boundary and
for strings that have wider elements. The redaction of this code involved removing ALL concatenation of
delimiters, optimization of the maximum "N" value by using TOP instead of including it in the WHERE clause,
and the reduction of all previous calculations (thanks to the switch to a "zero based" cteTally) to just one
instance of one add and one instance of a subtract. The length calculation for the final element (not
followed by a delimiter) in the string to be split has been greatly simplified by using the ISNULL/NULLIF
combination to determine when the CHARINDEX returned a 0 which indicates there are no more delimiters to be
had or to start with. Depending on the width of the elements, this code is between 4 and 8 times faster on a
single CPU box than the original code especially near the 8K boundary.
- Modified comments to include more sanity checks on the usage example, etc.
- Removed "other" notes 8 and 9 as they were no longer applicable.
Rev 06 - 12 Apr 2011 - Jeff Moden
- Based on a suggestion by Ron "Bitbucket" McCullough, additional test rows were added to the sample code and
the code was changed to encapsulate the output in pipes so that spaces and empty strings could be perceived
in the output. The first "Notes" section was added. Finally, an extra test was added to the comments above.
Rev 07 - 06 May 2011 - Peter de Heer, a further 15-20% performance enhancement has been discovered and incorporated
into this code which also eliminated the need for a "zero" position in the cteTally table.
**********************************************************************************************************************/
--===== Define I/O parameters
(#pString VARCHAR(8000), #pDelimiter CHAR(1))
RETURNS TABLE WITH SCHEMABINDING AS
RETURN
--===== "Inline" CTE Driven "Tally Table" produces values from 0 up to 10,000...
-- enough to cover NVARCHAR(4000)
WITH E1(N) AS (
SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1 UNION ALL
SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1 UNION ALL
SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1
), --10E+1 or 10 rows
E2(N) AS (SELECT 1 FROM E1 a, E1 b), --10E+2 or 100 rows
E4(N) AS (SELECT 1 FROM E2 a, E2 b), --10E+4 or 10,000 rows max
cteTally(N) AS (--==== This provides the "base" CTE and limits the number of rows right up front
-- for both a performance gain and prevention of accidental "overruns"
SELECT TOP (ISNULL(DATALENGTH(#pString),0)) ROW_NUMBER() OVER (ORDER BY (SELECT NULL)) FROM E4
),
cteStart(N1) AS (--==== This returns N+1 (starting position of each "element" just once for each delimiter)
SELECT 1 UNION ALL
SELECT t.N+1 FROM cteTally t WHERE SUBSTRING(#pString,t.N,1) = #pDelimiter
),
cteLen(N1,L1) AS(--==== Return start and length (for use in substring)
SELECT s.N1,
ISNULL(NULLIF(CHARINDEX(#pDelimiter,#pString,s.N1),0)-s.N1,8000)
FROM cteStart s
)
--===== Do the actual split. The ISNULL/NULLIF combo handles the length for the final element when no delimiter is found.
SELECT ItemNumber = ROW_NUMBER() OVER(ORDER BY l.N1),
Item = SUBSTRING(#pString, l.N1, l.L1)
FROM cteLen l
;
GO
With SQL Server 2016 we can use string_split to accomplish this:
create table commasep (
id int identity(1,1)
,string nvarchar(100) )
insert into commasep (string) values ('John, Adam'), ('test1,test2,test3')
select id, [value] as String from commasep
cross apply string_split(string,',')
CREATE FUNCTION [dbo].[fn_split_string_to_column] (
#string NVARCHAR(MAX),
#delimiter CHAR(1)
)
RETURNS #out_put TABLE (
[column_id] INT IDENTITY(1, 1) NOT NULL,
[value] NVARCHAR(MAX)
)
AS
BEGIN
DECLARE #value NVARCHAR(MAX),
#pos INT = 0,
#len INT = 0
SET #string = CASE
WHEN RIGHT(#string, 1) != #delimiter
THEN #string + #delimiter
ELSE #string
END
WHILE CHARINDEX(#delimiter, #string, #pos + 1) > 0
BEGIN
SET #len = CHARINDEX(#delimiter, #string, #pos + 1) - #pos
SET #value = SUBSTRING(#string, #pos, #len)
INSERT INTO #out_put ([value])
SELECT LTRIM(RTRIM(#value)) AS [column]
SET #pos = CHARINDEX(#delimiter, #string, #pos + #len) + 1
END
RETURN
END
SELECT id,
Substring(NAME, 0, Charindex(',', NAME)) AS firstname,
Substring(NAME, Charindex(',', NAME), Len(NAME) + 1) AS lastname
FROM spilt
Try this (change instances of ' ' to ',' or whatever delimiter you want to use)
CREATE FUNCTION dbo.Wordparser
(
#multiwordstring VARCHAR(255),
#wordnumber NUMERIC
)
returns VARCHAR(255)
AS
BEGIN
DECLARE #remainingstring VARCHAR(255)
SET #remainingstring=#multiwordstring
DECLARE #numberofwords NUMERIC
SET #numberofwords=(LEN(#remainingstring) - LEN(REPLACE(#remainingstring, ' ', '')) + 1)
DECLARE #word VARCHAR(50)
DECLARE #parsedwords TABLE
(
line NUMERIC IDENTITY(1, 1),
word VARCHAR(255)
)
WHILE #numberofwords > 1
BEGIN
SET #word=LEFT(#remainingstring, CHARINDEX(' ', #remainingstring) - 1)
INSERT INTO #parsedwords(word)
SELECT #word
SET #remainingstring= REPLACE(#remainingstring, Concat(#word, ' '), '')
SET #numberofwords=(LEN(#remainingstring) - LEN(REPLACE(#remainingstring, ' ', '')) + 1)
IF #numberofwords = 1
BREAK
ELSE
CONTINUE
END
IF #numberofwords = 1
SELECT #word = #remainingstring
INSERT INTO #parsedwords(word)
SELECT #word
RETURN
(SELECT word
FROM #parsedwords
WHERE line = #wordnumber)
END
Example usage:
SELECT dbo.Wordparser(COLUMN, 1),
dbo.Wordparser(COLUMN, 2),
dbo.Wordparser(COLUMN, 3)
FROM TABLE
I think PARSENAME is the neat function to use for this example, as described in this article: http://www.sqlshack.com/parsing-and-rotating-delimited-data-in-sql-server-2012/
The PARSENAME function is logically designed to parse four-part object names. The nice thing about PARSENAME is that it’s not limited to parsing just SQL Server four-part object names – it will parse any function or string data that is delimited by dots.
The first parameter is the object to parse, and the second is the integer value of the object piece to return. The article is discussing parsing and rotating delimited data - company phone numbers, but it can be used to parse name/surname data also.
Example:
USE COMPANY;
SELECT PARSENAME('Whatever.you.want.parsed',3) AS 'ReturnValue';
The article also describes using a Common Table Expression (CTE) called ‘replaceChars’, to run PARSENAME against the delimiter-replaced values. A CTE is useful for returning a temporary view or result set.
After that, the UNPIVOT function has been used to convert some columns into rows; SUBSTRING and CHARINDEX functions have been used for cleaning up the inconsistencies in the data, and the LAG function (new for SQL Server 2012) has been used in the end, as it allows referencing of previous records.
We can create a function as this
CREATE Function [dbo].[fn_CSVToTable]
(
#CSVList Varchar(max)
)
RETURNS #Table TABLE (ColumnData VARCHAR(100))
AS
BEGIN
IF RIGHT(#CSVList, 1) <> ','
SELECT #CSVList = #CSVList + ','
DECLARE #Pos BIGINT,
#OldPos BIGINT
SELECT #Pos = 1,
#OldPos = 1
WHILE #Pos < LEN(#CSVList)
BEGIN
SELECT #Pos = CHARINDEX(',', #CSVList, #OldPos)
INSERT INTO #Table
SELECT LTRIM(RTRIM(SUBSTRING(#CSVList, #OldPos, #Pos - #OldPos))) Col001
SELECT #OldPos = #Pos + 1
END
RETURN
END
We can then seperate the CSV values into our respective columns using a SELECT statement
You can use a table-valued function STRING_SPLIT, which is available only under compatibility level 130. If your database compatibility level is lower than 130, SQL Server will not be able to find and execute the STRING_SPLIT function. You can change a compatibility level of the database using the following command:
ALTER DATABASE DatabaseName SET COMPATIBILITY_LEVEL = 130
Syntax
SELECT * FROM STRING_SPLIT ( string, separator )
see documentation here
I think following function will work for you:
You have to create a function in SQL first. Like this
CREATE FUNCTION [dbo].[fn_split](
#str VARCHAR(MAX),
#delimiter CHAR(1)
)
RETURNS #returnTable TABLE (idx INT PRIMARY KEY IDENTITY, item VARCHAR(8000))
AS
BEGIN
DECLARE #pos INT
SELECT #str = #str + #delimiter
WHILE LEN(#str) > 0
BEGIN
SELECT #pos = CHARINDEX(#delimiter,#str)
IF #pos = 1
INSERT #returnTable (item)
VALUES (NULL)
ELSE
INSERT #returnTable (item)
VALUES (SUBSTRING(#str, 1, #pos-1))
SELECT #str = SUBSTRING(#str, #pos+1, LEN(#str)-#pos)
END
RETURN
END
You can call this function, like this:
select * from fn_split('1,24,5',',')
Implementation:
Declare #test TABLE (
ID VARCHAR(200),
Data VARCHAR(200)
)
insert into #test
(ID, Data)
Values
('1','Cleo,Smith')
insert into #test
(ID, Data)
Values
('2','Paul,Grim')
select ID,
(select item from fn_split(Data,',') where idx in (1)) as Name ,
(select item from fn_split(Data,',') where idx in (2)) as Surname
from #test
Result will like this:
Use Parsename() function
with cte as(
select 'Aria,Karimi' as FullName
Union
select 'Joe,Karimi' as FullName
Union
select 'Bab,Karimi' as FullName
)
SELECT PARSENAME(REPLACE(FullName,',','.'),2) as Name,
PARSENAME(REPLACE(FullName,',','.'),1) as Family
FROM cte
Result
Name Family
----- ------
Aria Karimi
Bab Karimi
Joe Karimi
Try this:
declare #csv varchar(100) ='aaa,bb,csda,daass';
set #csv = #csv+',';
with cte as
(
select SUBSTRING(#csv,1,charindex(',',#csv,1)-1) as val, SUBSTRING(#csv,charindex(',',#csv,1)+1,len(#csv)) as rem
UNION ALL
select SUBSTRING(a.rem,1,charindex(',',a.rem,1)-1)as val, SUBSTRING(a.rem,charindex(',',a.rem,1)+1,len(A.rem))
from cte a where LEN(a.rem)>=1
) select val from cte
This function is most fast:
CREATE FUNCTION dbo.F_ExtractSubString
(
#String VARCHAR(MAX),
#NroSubString INT,
#Separator VARCHAR(5)
)
RETURNS VARCHAR(MAX) AS
BEGIN
DECLARE #St INT = 0, #End INT = 0, #Ret VARCHAR(MAX)
SET #String = #String + #Separator
WHILE CHARINDEX(#Separator, #String, #End + 1) > 0 AND #NroSubString > 0
BEGIN
SET #St = #End + 1
SET #End = CHARINDEX(#Separator, #String, #End + 1)
SET #NroSubString = #NroSubString - 1
END
IF #NroSubString > 0
SET #Ret = ''
ELSE
SET #Ret = SUBSTRING(#String, #St, #End - #St)
RETURN #Ret
END
GO
Example usage:
SELECT dbo.F_ExtractSubString(COLUMN, 1, ', '),
dbo.F_ExtractSubString(COLUMN, 2, ', '),
dbo.F_ExtractSubString(COLUMN, 3, ', ')
FROM TABLE
I encountered a similar problem but a complex one and since this is the first thread i found regarding that issue i decided to post my finding. i know it is complex solution to a simple problem but i hope that i could help other people who go to this thread looking for a more complex solution. i had to split a string containing 5 numbers (column name: levelsFeed) and to show each number in a separate column.
for example: 8,1,2,2,2
should be shown as :
1 2 3 4 5
-------------
8 1 2 2 2
Solution 1: using XML functions:
this solution for the slowest solution by far
SELECT Distinct FeedbackID,
, S.a.value('(/H/r)[1]', 'INT') AS level1
, S.a.value('(/H/r)[2]', 'INT') AS level2
, S.a.value('(/H/r)[3]', 'INT') AS level3
, S.a.value('(/H/r)[4]', 'INT') AS level4
, S.a.value('(/H/r)[5]', 'INT') AS level5
FROM (
SELECT *,CAST (N'<H><r>' + REPLACE(levelsFeed, ',', '</r><r>') + '</r> </H>' AS XML) AS [vals]
FROM Feedbacks
) as d
CROSS APPLY d.[vals].nodes('/H/r') S(a)
Solution 2: using Split function and pivot. (the split function split a string to rows with the column name Data)
SELECT FeedbackID, [1],[2],[3],[4],[5]
FROM (
SELECT *, ROW_NUMBER() OVER (PARTITION BY feedbackID ORDER BY (SELECT null)) as rn
FROM (
SELECT FeedbackID, levelsFeed
FROM Feedbacks
) as a
CROSS APPLY dbo.Split(levelsFeed, ',')
) as SourceTable
PIVOT
(
MAX(data)
FOR rn IN ([1],[2],[3],[4],[5])
)as pivotTable
Solution 3: using string manipulations functions - fastest by small margin over solution 2
SELECT FeedbackID,
SUBSTRING(levelsFeed,0,CHARINDEX(',',levelsFeed)) AS level1,
PARSENAME(REPLACE(SUBSTRING(levelsFeed,CHARINDEX(',',levelsFeed)+1,LEN(levelsFeed)),',','.'),4) AS level2,
PARSENAME(REPLACE(SUBSTRING(levelsFeed,CHARINDEX(',',levelsFeed)+1,LEN(levelsFeed)),',','.'),3) AS level3,
PARSENAME(REPLACE(SUBSTRING(levelsFeed,CHARINDEX(',',levelsFeed)+1,LEN(levelsFeed)),',','.'),2) AS level4,
PARSENAME(REPLACE(SUBSTRING(levelsFeed,CHARINDEX(',',levelsFeed)+1,LEN(levelsFeed)),',','.'),1) AS level5
FROM Feedbacks
since the levelsFeed contains 5 string values i needed to use the substring function for the first string.
i hope that my solution will help other that got to this thread looking for a more complex split to columns methods
Using instring function :)
select Value,
substring(String,1,instr(String," ") -1) Fname,
substring(String,instr(String,",") +1) Sname
from tablename;
Used two functions,
1. substring(string, position, length) ==> returns string from positon to length
2. instr(string,pattern) ==> returns position of pattern.
If we don’t provide length argument in substring it returns until end of string
This worked for me
CREATE FUNCTION [dbo].[SplitString](
#delimited NVARCHAR(MAX),
#delimiter NVARCHAR(100)
) RETURNS #t TABLE ( val NVARCHAR(MAX))
AS
BEGIN
DECLARE #xml XML
SET #xml = N'<t>' + REPLACE(#delimited,#delimiter,'</t><t>') + '</t>'
INSERT INTO #t(val)
SELECT r.value('.','varchar(MAX)') as item
FROM #xml.nodes('/t') as records(r)
RETURN
END
mytable:
Value ColOne
--------------------
1 Cleo, Smith
The following should work if there aren't too many columns
ALTER TABLE mytable ADD ColTwo nvarchar(256);
UPDATE mytable SET ColTwo = LEFT(ColOne, Charindex(',', ColOne) - 1);
--'Cleo' = LEFT('Cleo, Smith', Charindex(',', 'Cleo, Smith') - 1)
UPDATE mytable SET ColTwo = REPLACE(ColOne, ColTwo + ',', '');
--' Smith' = REPLACE('Cleo, Smith', 'Cleo' + ',')
UPDATE mytable SET ColOne = REPLACE(ColOne, ',' + ColTwo, ''), ColTwo = LTRIM(ColTwo);
--'Cleo' = REPLACE('Cleo, Smith', ',' + ' Smith', '')
Result:
Value ColOne ColTwo
--------------------
1 Cleo Smith
DECLARE #INPUT VARCHAR (MAX)='N,A,R,E,N,D,R,A'
DECLARE #ELIMINATE_CHAR CHAR (1)=','
DECLARE #L_START INT=1
DECLARE #L_END INT=(SELECT LEN (#INPUT))
DECLARE #OUTPUT CHAR (1)
WHILE #L_START <=#L_END
BEGIN
SET #OUTPUT=(SUBSTRING (#INPUT,#L_START,1))
IF #OUTPUT!=#ELIMINATE_CHAR
BEGIN
PRINT #OUTPUT
END
SET #L_START=#L_START+1
END
You may find the solution in SQL User Defined Function to Parse a Delimited String helpful (from The Code Project).
This is the code part from this page:
CREATE FUNCTION [fn_ParseText2Table]
(#p_SourceText VARCHAR(MAX)
,#p_Delimeter VARCHAR(100)=',' --default to comma delimited.
)
RETURNS #retTable
TABLE([Position] INT IDENTITY(1,1)
,[Int_Value] INT
,[Num_Value] NUMERIC(18,3)
,[Txt_Value] VARCHAR(MAX)
,[Date_value] DATETIME
)
AS
/*
********************************************************************************
Purpose: Parse values from a delimited string
& return the result as an indexed table
Copyright 1996, 1997, 2000, 2003 Clayton Groom (Clayton_Groom#hotmail.com)
Posted to the public domain Aug, 2004
2003-06-17 Rewritten as SQL 2000 function.
Reworked to allow for delimiters > 1 character in length
and to convert Text values to numbers
2016-04-05 Added logic for date values based on "new" ISDATE() function, Updated to use XML approach, which is more efficient.
********************************************************************************
*/
BEGIN
DECLARE #w_xml xml;
SET #w_xml = N'<root><i>' + replace(#p_SourceText, #p_Delimeter,'</i><i>') + '</i></root>';
INSERT INTO #retTable
([Int_Value]
, [Num_Value]
, [Txt_Value]
, [Date_value]
)
SELECT CASE
WHEN ISNUMERIC([i].value('.', 'VARCHAR(MAX)')) = 1
THEN CAST(CAST([i].value('.', 'VARCHAR(MAX)') AS NUMERIC) AS INT)
END AS [Int_Value]
, CASE
WHEN ISNUMERIC([i].value('.', 'VARCHAR(MAX)')) = 1
THEN CAST([i].value('.', 'VARCHAR(MAX)') AS NUMERIC(18, 3))
END AS [Num_Value]
, [i].value('.', 'VARCHAR(MAX)') AS [txt_Value]
, CASE
WHEN ISDATE([i].value('.', 'VARCHAR(MAX)')) = 1
THEN CAST([i].value('.', 'VARCHAR(MAX)') AS DATETIME)
END AS [Num_Value]
FROM #w_xml.nodes('//root/i') AS [Items]([i]);
RETURN;
END;
GO
ALTER function get_occurance_index(#delimiter varchar(1),#occurence int,#String varchar(100))
returns int
AS Begin
--Declare #delimiter varchar(1)=',',#occurence int=2,#String varchar(100)='a,b,c'
Declare #result int
;with T as (
select 1 Rno,0 as row, charindex(#delimiter, #String) pos,#String st
union all
select Rno+1,pos + 1, charindex(#delimiter, #String, pos + 1), #String
from T
where pos > 0
)
select #result=pos
from T
where pos > 0 and rno = #occurence
return isnull(#result,0)
ENd
declare #data as table (data varchar(100))
insert into #data values('1,2,3')
insert into #data values('aaa,bbbbb,cccc')
select top 3 Substring (data,0,dbo.get_occurance_index( ',',1,data)) ,--First Record always starts with 0
Substring (data,dbo.get_occurance_index( ',',1,data)+1,dbo.get_occurance_index( ',',2,data)-dbo.get_occurance_index( ',',1,data)-1) ,
Substring (data,dbo.get_occurance_index( ',',2,data)+1,len(data)) , -- Last record cant be more than len of actual data
data
From #data
I found that using PARSENAME as above caused any name with a period to get nulled.
So if there was an initial or a title in the name followed by a dot they return NULL.
I found this worked for me:
SELECT
REPLACE(SUBSTRING(FullName, 1,CHARINDEX(',', FullName)), ',','') as Name,
REPLACE(SUBSTRING(FullName, CHARINDEX(',', FullName), LEN(FullName)), ',', '') as Surname
FROM Table1
it is so easy, you can take it by below query:
DECLARE #str NVARCHAR(MAX)='ControlID_05436b78-04ba-9667-fa01-9ff8c1b7c235,3'
SELECT LEFT(#str, CHARINDEX(',',#str)-1),RIGHT(#str,LEN(#str)-(CHARINDEX(',',#str)))
select distinct modelFileId,F4.*
from contract
cross apply (select XmlList=convert(xml, '<x>'+replace(modelFileId,';','</x><x>')+'</x>').query('.')) F2
cross apply (select mfid1=XmlNode.value('/x[1]','varchar(512)')
,mfid2=XmlNode.value('/x[2]','varchar(512)')
,mfid3=XmlNode.value('/x[3]','varchar(512)')
,mfid4=XmlNode.value('/x[4]','varchar(512)') from XmlList.nodes('x') F3(XmlNode)) F4
where modelFileId like '%;%'
order by modelFileId
Select distinct PROJ_UID,PROJ_NAME,RES_UID from E2E_ProjectWiseTimesheetActuals
where CHARINDEX(','+cast(PROJ_UID as varchar(8000))+',', #params) > 0 and CHARINDEX(','+cast(RES_UID as varchar(8000))+',', #res) > 0
I re-wrote an answer above and made it better:
CREATE FUNCTION [dbo].[CSVParser]
(
#s VARCHAR(255),
#idx NUMERIC
)
RETURNS VARCHAR(12)
BEGIN
DECLARE #comma int
SET #comma = CHARINDEX(',', #s)
WHILE 1=1
BEGIN
IF #comma=0
IF #idx=1
RETURN #s
ELSE
RETURN ''
IF #idx=1
BEGIN
DECLARE #word VARCHAR(12)
SET #word=LEFT(#s, #comma - 1)
RETURN #word
END
SET #s = RIGHT(#s,LEN(#s)-#comma)
SET #comma = CHARINDEX(',', #s)
SET #idx = #idx - 1
END
RETURN 'not used'
END
Example usage:
SELECT dbo.CSVParser(COLUMN, 1),
dbo.CSVParser(COLUMN, 2),
dbo.CSVParser(COLUMN, 3)
FROM TABLE
question is simple, but problem is hot :)
So I create some wrapper for string_split() which pivot result in more generic way. It's table function which returns values (nn, value1, value2, ... , value50) - enough for most CSV lines. If there are more values, they will wrap to next line - nn indicate line number. Set third parameter #columnCnt = [yourNumber] to wrap at specific position:
alter FUNCTION fn_Split50
(
#str varchar(max),
#delim char(1),
#columnCnt int = 50
)
RETURNS TABLE
AS
RETURN
(
SELECT *
FROM (SELECT
nn = (nn - 1) / #columnCnt + 1,
nnn = 'value' + cast(((nn - 1) % #columnCnt) + 1 as varchar(10)),
value
FROM (SELECT
nn = ROW_NUMBER() over (order by (select null)),
value
FROM string_split(#str, #delim) aa
) aa
where nn > 0
) bb
PIVOT
(
max(value)
FOR nnn IN (
value1, value2, value3, value4, value5, value6, value7, value8, value9, value10,
value11, value12, value13, value14, value15, value16, value17, value18, value19, value20,
value21, value22, value23, value24, value25, value26, value27, value28, value29, value30,
value31, value32, value33, value34, value35, value36, value37, value38, value39, value40,
value41, value42, value43, value44, value45, value46, value47, value48, value49, value50
)
) AS PivotTable
)
Example of using:
select * from dbo.fn_split50('zz1,aa2,ss3,dd4,ff5', ',', DEFAULT)
select * from dbo.fn_split50('zz1,aa2,ss3,dd4,ff5,gg6,hh7,jj8,ww9,qq10', ',', 3)
select * from dbo.fn_split50('zz1,11,aa2,22,ss3,33,dd4,44,ff5,55,gg6,66,hh7,77,jj8,88,ww9,99,qq10,1010', ',',2)
Hope, it will helps :)

Extract full name into different columns (First, Middle, Last) [duplicate]

I have a table like this
Value String
-------------------
1 Cleo, Smith
I want to separate the comma delimited string into two columns
Value Name Surname
-------------------
1 Cleo Smith
I need only two fixed extra columns
Your purpose can be solved using following query -
Select Value , Substring(FullName, 1,Charindex(',', FullName)-1) as Name,
Substring(FullName, Charindex(',', FullName)+1, LEN(FullName)) as Surname
from Table1
There is no readymade Split function in sql server, so we need to create user defined function.
CREATE FUNCTION Split (
#InputString VARCHAR(8000),
#Delimiter VARCHAR(50)
)
RETURNS #Items TABLE (
Item VARCHAR(8000)
)
AS
BEGIN
IF #Delimiter = ' '
BEGIN
SET #Delimiter = ','
SET #InputString = REPLACE(#InputString, ' ', #Delimiter)
END
IF (#Delimiter IS NULL OR #Delimiter = '')
SET #Delimiter = ','
--INSERT INTO #Items VALUES (#Delimiter) -- Diagnostic
--INSERT INTO #Items VALUES (#InputString) -- Diagnostic
DECLARE #Item VARCHAR(8000)
DECLARE #ItemList VARCHAR(8000)
DECLARE #DelimIndex INT
SET #ItemList = #InputString
SET #DelimIndex = CHARINDEX(#Delimiter, #ItemList, 0)
WHILE (#DelimIndex != 0)
BEGIN
SET #Item = SUBSTRING(#ItemList, 0, #DelimIndex)
INSERT INTO #Items VALUES (#Item)
-- Set #ItemList = #ItemList minus one less item
SET #ItemList = SUBSTRING(#ItemList, #DelimIndex+1, LEN(#ItemList)-#DelimIndex)
SET #DelimIndex = CHARINDEX(#Delimiter, #ItemList, 0)
END -- End WHILE
IF #Item IS NOT NULL -- At least one delimiter was encountered in #InputString
BEGIN
SET #Item = #ItemList
INSERT INTO #Items VALUES (#Item)
END
-- No delimiters were encountered in #InputString, so just return #InputString
ELSE INSERT INTO #Items VALUES (#InputString)
RETURN
END -- End Function
GO
---- Set Permissions
--GRANT SELECT ON Split TO UserRole1
--GRANT SELECT ON Split TO UserRole2
--GO
;WITH Split_Names (Value,Name, xmlname)
AS
(
SELECT Value,
Name,
CONVERT(XML,'<Names><name>'
+ REPLACE(Name,',', '</name><name>') + '</name></Names>') AS xmlname
FROM tblnames
)
SELECT Value,
xmlname.value('/Names[1]/name[1]','varchar(100)') AS Name,
xmlname.value('/Names[1]/name[2]','varchar(100)') AS Surname
FROM Split_Names
and also check the link below for reference
http://jahaines.blogspot.in/2009/06/converting-delimited-string-of-values.html
xml based answer is simple and clean
refer this
DECLARE #S varchar(max),
#Split char(1),
#X xml
SELECT #S = 'ab,cd,ef,gh,ij',
#Split = ','
SELECT #X = CONVERT(xml,' <root> <myvalue>' +
REPLACE(#S,#Split,'</myvalue> <myvalue>') + '</myvalue> </root> ')
SELECT T.c.value('.','varchar(20)'), --retrieve ALL values at once
T.c.value('(/root/myvalue)[1]','VARCHAR(20)') , --retrieve index 1 only, which is the 'ab'
T.c.value('(/root/myvalue)[2]','VARCHAR(20)')
FROM #X.nodes('/root/myvalue') T(c)
I think this is cool
SELECT value,
PARSENAME(REPLACE(String,',','.'),2) 'Name' ,
PARSENAME(REPLACE(String,',','.'),1) 'Surname'
FROM table WITH (NOLOCK)
With CROSS APPLY
select ParsedData.*
from MyTable mt
cross apply ( select str = mt.String + ',,' ) f1
cross apply ( select p1 = charindex( ',', str ) ) ap1
cross apply ( select p2 = charindex( ',', str, p1 + 1 ) ) ap2
cross apply ( select Nmame = substring( str, 1, p1-1 )
, Surname = substring( str, p1+1, p2-p1-1 )
) ParsedData
There are multiple ways to solve this and many different ways have been proposed already. Simplest would be to use LEFT / SUBSTRING and other string functions to achieve the desired result.
Sample Data
DECLARE #tbl1 TABLE (Value INT,String VARCHAR(MAX))
INSERT INTO #tbl1 VALUES(1,'Cleo, Smith');
INSERT INTO #tbl1 VALUES(2,'John, Mathew');
Using String Functions like LEFT
SELECT
Value,
LEFT(String,CHARINDEX(',',String)-1) as Fname,
LTRIM(RIGHT(String,LEN(String) - CHARINDEX(',',String) )) AS Lname
FROM #tbl1
This approach fails if there are more 2 items in a String.
In such a scenario, we can use a splitter and then use PIVOT or convert the string into an XML and use .nodes to get string items. XML based solution have been detailed out by aads and bvr in their solution.
The answers for this question which use splitter, all use WHILE which is inefficient for splitting. Check this performance comparison. One of the best splitters around is DelimitedSplit8K, created by Jeff Moden. You can read more about it here
Splitter with PIVOT
DECLARE #tbl1 TABLE (Value INT,String VARCHAR(MAX))
INSERT INTO #tbl1 VALUES(1,'Cleo, Smith');
INSERT INTO #tbl1 VALUES(2,'John, Mathew');
SELECT t3.Value,[1] as Fname,[2] as Lname
FROM #tbl1 as t1
CROSS APPLY [dbo].[DelimitedSplit8K](String,',') as t2
PIVOT(MAX(Item) FOR ItemNumber IN ([1],[2])) as t3
Output
Value Fname Lname
1 Cleo Smith
2 John Mathew
DelimitedSplit8K by Jeff Moden
CREATE FUNCTION [dbo].[DelimitedSplit8K]
/**********************************************************************************************************************
Purpose:
Split a given string at a given delimiter and return a list of the split elements (items).
Notes:
1. Leading a trailing delimiters are treated as if an empty string element were present.
2. Consecutive delimiters are treated as if an empty string element were present between them.
3. Except when spaces are used as a delimiter, all spaces present in each element are preserved.
Returns:
iTVF containing the following:
ItemNumber = Element position of Item as a BIGINT (not converted to INT to eliminate a CAST)
Item = Element value as a VARCHAR(8000)
Statistics on this function may be found at the following URL:
http://www.sqlservercentral.com/Forums/Topic1101315-203-4.aspx
CROSS APPLY Usage Examples and Tests:
--=====================================================================================================================
-- TEST 1:
-- This tests for various possible conditions in a string using a comma as the delimiter. The expected results are
-- laid out in the comments
--=====================================================================================================================
--===== Conditionally drop the test tables to make reruns easier for testing.
-- (this is NOT a part of the solution)
IF OBJECT_ID('tempdb..#JBMTest') IS NOT NULL DROP TABLE #JBMTest
;
--===== Create and populate a test table on the fly (this is NOT a part of the solution).
-- In the following comments, "b" is a blank and "E" is an element in the left to right order.
-- Double Quotes are used to encapsulate the output of "Item" so that you can see that all blanks
-- are preserved no matter where they may appear.
SELECT *
INTO #JBMTest
FROM ( --# & type of Return Row(s)
SELECT 0, NULL UNION ALL --1 NULL
SELECT 1, SPACE(0) UNION ALL --1 b (Empty String)
SELECT 2, SPACE(1) UNION ALL --1 b (1 space)
SELECT 3, SPACE(5) UNION ALL --1 b (5 spaces)
SELECT 4, ',' UNION ALL --2 b b (both are empty strings)
SELECT 5, '55555' UNION ALL --1 E
SELECT 6, ',55555' UNION ALL --2 b E
SELECT 7, ',55555,' UNION ALL --3 b E b
SELECT 8, '55555,' UNION ALL --2 b B
SELECT 9, '55555,1' UNION ALL --2 E E
SELECT 10, '1,55555' UNION ALL --2 E E
SELECT 11, '55555,4444,333,22,1' UNION ALL --5 E E E E E
SELECT 12, '55555,4444,,333,22,1' UNION ALL --6 E E b E E E
SELECT 13, ',55555,4444,,333,22,1,' UNION ALL --8 b E E b E E E b
SELECT 14, ',55555,4444,,,333,22,1,' UNION ALL --9 b E E b b E E E b
SELECT 15, ' 4444,55555 ' UNION ALL --2 E (w/Leading Space) E (w/Trailing Space)
SELECT 16, 'This,is,a,test.' --E E E E
) d (SomeID, SomeValue)
;
--===== Split the CSV column for the whole table using CROSS APPLY (this is the solution)
SELECT test.SomeID, test.SomeValue, split.ItemNumber, Item = QUOTENAME(split.Item,'"')
FROM #JBMTest test
CROSS APPLY dbo.DelimitedSplit8K(test.SomeValue,',') split
;
--=====================================================================================================================
-- TEST 2:
-- This tests for various "alpha" splits and COLLATION using all ASCII characters from 0 to 255 as a delimiter against
-- a given string. Note that not all of the delimiters will be visible and some will show up as tiny squares because
-- they are "control" characters. More specifically, this test will show you what happens to various non-accented
-- letters for your given collation depending on the delimiter you chose.
--=====================================================================================================================
WITH
cteBuildAllCharacters (String,Delimiter) AS
(
SELECT TOP 256
'ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789',
CHAR(ROW_NUMBER() OVER (ORDER BY (SELECT NULL))-1)
FROM master.sys.all_columns
)
SELECT ASCII_Value = ASCII(c.Delimiter), c.Delimiter, split.ItemNumber, Item = QUOTENAME(split.Item,'"')
FROM cteBuildAllCharacters c
CROSS APPLY dbo.DelimitedSplit8K(c.String,c.Delimiter) split
ORDER BY ASCII_Value, split.ItemNumber
;
-----------------------------------------------------------------------------------------------------------------------
Other Notes:
1. Optimized for VARCHAR(8000) or less. No testing or error reporting for truncation at 8000 characters is done.
2. Optimized for single character delimiter. Multi-character delimiters should be resolvedexternally from this
function.
3. Optimized for use with CROSS APPLY.
4. Does not "trim" elements just in case leading or trailing blanks are intended.
5. If you don't know how a Tally table can be used to replace loops, please see the following...
http://www.sqlservercentral.com/articles/T-SQL/62867/
6. Changing this function to use NVARCHAR(MAX) will cause it to run twice as slow. It's just the nature of
VARCHAR(MAX) whether it fits in-row or not.
7. Multi-machine testing for the method of using UNPIVOT instead of 10 SELECT/UNION ALLs shows that the UNPIVOT method
is quite machine dependent and can slow things down quite a bit.
-----------------------------------------------------------------------------------------------------------------------
Credits:
This code is the product of many people's efforts including but not limited to the following:
cteTally concept originally by Iztek Ben Gan and "decimalized" by Lynn Pettis (and others) for a bit of extra speed
and finally redacted by Jeff Moden for a different slant on readability and compactness. Hat's off to Paul White for
his simple explanations of CROSS APPLY and for his detailed testing efforts. Last but not least, thanks to
Ron "BitBucket" McCullough and Wayne Sheffield for their extreme performance testing across multiple machines and
versions of SQL Server. The latest improvement brought an additional 15-20% improvement over Rev 05. Special thanks
to "Nadrek" and "peter-757102" (aka Peter de Heer) for bringing such improvements to light. Nadrek's original
improvement brought about a 10% performance gain and Peter followed that up with the content of Rev 07.
I also thank whoever wrote the first article I ever saw on "numbers tables" which is located at the following URL
and to Adam Machanic for leading me to it many years ago.
http://sqlserver2000.databases.aspfaq.com/why-should-i-consider-using-an-auxiliary-numbers-table.html
-----------------------------------------------------------------------------------------------------------------------
Revision History:
Rev 00 - 20 Jan 2010 - Concept for inline cteTally: Lynn Pettis and others.
Redaction/Implementation: Jeff Moden
- Base 10 redaction and reduction for CTE. (Total rewrite)
Rev 01 - 13 Mar 2010 - Jeff Moden
- Removed one additional concatenation and one subtraction from the SUBSTRING in the SELECT List for that tiny
bit of extra speed.
Rev 02 - 14 Apr 2010 - Jeff Moden
- No code changes. Added CROSS APPLY usage example to the header, some additional credits, and extra
documentation.
Rev 03 - 18 Apr 2010 - Jeff Moden
- No code changes. Added notes 7, 8, and 9 about certain "optimizations" that don't actually work for this
type of function.
Rev 04 - 29 Jun 2010 - Jeff Moden
- Added WITH SCHEMABINDING thanks to a note by Paul White. This prevents an unnecessary "Table Spool" when the
function is used in an UPDATE statement even though the function makes no external references.
Rev 05 - 02 Apr 2011 - Jeff Moden
- Rewritten for extreme performance improvement especially for larger strings approaching the 8K boundary and
for strings that have wider elements. The redaction of this code involved removing ALL concatenation of
delimiters, optimization of the maximum "N" value by using TOP instead of including it in the WHERE clause,
and the reduction of all previous calculations (thanks to the switch to a "zero based" cteTally) to just one
instance of one add and one instance of a subtract. The length calculation for the final element (not
followed by a delimiter) in the string to be split has been greatly simplified by using the ISNULL/NULLIF
combination to determine when the CHARINDEX returned a 0 which indicates there are no more delimiters to be
had or to start with. Depending on the width of the elements, this code is between 4 and 8 times faster on a
single CPU box than the original code especially near the 8K boundary.
- Modified comments to include more sanity checks on the usage example, etc.
- Removed "other" notes 8 and 9 as they were no longer applicable.
Rev 06 - 12 Apr 2011 - Jeff Moden
- Based on a suggestion by Ron "Bitbucket" McCullough, additional test rows were added to the sample code and
the code was changed to encapsulate the output in pipes so that spaces and empty strings could be perceived
in the output. The first "Notes" section was added. Finally, an extra test was added to the comments above.
Rev 07 - 06 May 2011 - Peter de Heer, a further 15-20% performance enhancement has been discovered and incorporated
into this code which also eliminated the need for a "zero" position in the cteTally table.
**********************************************************************************************************************/
--===== Define I/O parameters
(#pString VARCHAR(8000), #pDelimiter CHAR(1))
RETURNS TABLE WITH SCHEMABINDING AS
RETURN
--===== "Inline" CTE Driven "Tally Table" produces values from 0 up to 10,000...
-- enough to cover NVARCHAR(4000)
WITH E1(N) AS (
SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1 UNION ALL
SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1 UNION ALL
SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1
), --10E+1 or 10 rows
E2(N) AS (SELECT 1 FROM E1 a, E1 b), --10E+2 or 100 rows
E4(N) AS (SELECT 1 FROM E2 a, E2 b), --10E+4 or 10,000 rows max
cteTally(N) AS (--==== This provides the "base" CTE and limits the number of rows right up front
-- for both a performance gain and prevention of accidental "overruns"
SELECT TOP (ISNULL(DATALENGTH(#pString),0)) ROW_NUMBER() OVER (ORDER BY (SELECT NULL)) FROM E4
),
cteStart(N1) AS (--==== This returns N+1 (starting position of each "element" just once for each delimiter)
SELECT 1 UNION ALL
SELECT t.N+1 FROM cteTally t WHERE SUBSTRING(#pString,t.N,1) = #pDelimiter
),
cteLen(N1,L1) AS(--==== Return start and length (for use in substring)
SELECT s.N1,
ISNULL(NULLIF(CHARINDEX(#pDelimiter,#pString,s.N1),0)-s.N1,8000)
FROM cteStart s
)
--===== Do the actual split. The ISNULL/NULLIF combo handles the length for the final element when no delimiter is found.
SELECT ItemNumber = ROW_NUMBER() OVER(ORDER BY l.N1),
Item = SUBSTRING(#pString, l.N1, l.L1)
FROM cteLen l
;
GO
With SQL Server 2016 we can use string_split to accomplish this:
create table commasep (
id int identity(1,1)
,string nvarchar(100) )
insert into commasep (string) values ('John, Adam'), ('test1,test2,test3')
select id, [value] as String from commasep
cross apply string_split(string,',')
CREATE FUNCTION [dbo].[fn_split_string_to_column] (
#string NVARCHAR(MAX),
#delimiter CHAR(1)
)
RETURNS #out_put TABLE (
[column_id] INT IDENTITY(1, 1) NOT NULL,
[value] NVARCHAR(MAX)
)
AS
BEGIN
DECLARE #value NVARCHAR(MAX),
#pos INT = 0,
#len INT = 0
SET #string = CASE
WHEN RIGHT(#string, 1) != #delimiter
THEN #string + #delimiter
ELSE #string
END
WHILE CHARINDEX(#delimiter, #string, #pos + 1) > 0
BEGIN
SET #len = CHARINDEX(#delimiter, #string, #pos + 1) - #pos
SET #value = SUBSTRING(#string, #pos, #len)
INSERT INTO #out_put ([value])
SELECT LTRIM(RTRIM(#value)) AS [column]
SET #pos = CHARINDEX(#delimiter, #string, #pos + #len) + 1
END
RETURN
END
SELECT id,
Substring(NAME, 0, Charindex(',', NAME)) AS firstname,
Substring(NAME, Charindex(',', NAME), Len(NAME) + 1) AS lastname
FROM spilt
Try this (change instances of ' ' to ',' or whatever delimiter you want to use)
CREATE FUNCTION dbo.Wordparser
(
#multiwordstring VARCHAR(255),
#wordnumber NUMERIC
)
returns VARCHAR(255)
AS
BEGIN
DECLARE #remainingstring VARCHAR(255)
SET #remainingstring=#multiwordstring
DECLARE #numberofwords NUMERIC
SET #numberofwords=(LEN(#remainingstring) - LEN(REPLACE(#remainingstring, ' ', '')) + 1)
DECLARE #word VARCHAR(50)
DECLARE #parsedwords TABLE
(
line NUMERIC IDENTITY(1, 1),
word VARCHAR(255)
)
WHILE #numberofwords > 1
BEGIN
SET #word=LEFT(#remainingstring, CHARINDEX(' ', #remainingstring) - 1)
INSERT INTO #parsedwords(word)
SELECT #word
SET #remainingstring= REPLACE(#remainingstring, Concat(#word, ' '), '')
SET #numberofwords=(LEN(#remainingstring) - LEN(REPLACE(#remainingstring, ' ', '')) + 1)
IF #numberofwords = 1
BREAK
ELSE
CONTINUE
END
IF #numberofwords = 1
SELECT #word = #remainingstring
INSERT INTO #parsedwords(word)
SELECT #word
RETURN
(SELECT word
FROM #parsedwords
WHERE line = #wordnumber)
END
Example usage:
SELECT dbo.Wordparser(COLUMN, 1),
dbo.Wordparser(COLUMN, 2),
dbo.Wordparser(COLUMN, 3)
FROM TABLE
I think PARSENAME is the neat function to use for this example, as described in this article: http://www.sqlshack.com/parsing-and-rotating-delimited-data-in-sql-server-2012/
The PARSENAME function is logically designed to parse four-part object names. The nice thing about PARSENAME is that it’s not limited to parsing just SQL Server four-part object names – it will parse any function or string data that is delimited by dots.
The first parameter is the object to parse, and the second is the integer value of the object piece to return. The article is discussing parsing and rotating delimited data - company phone numbers, but it can be used to parse name/surname data also.
Example:
USE COMPANY;
SELECT PARSENAME('Whatever.you.want.parsed',3) AS 'ReturnValue';
The article also describes using a Common Table Expression (CTE) called ‘replaceChars’, to run PARSENAME against the delimiter-replaced values. A CTE is useful for returning a temporary view or result set.
After that, the UNPIVOT function has been used to convert some columns into rows; SUBSTRING and CHARINDEX functions have been used for cleaning up the inconsistencies in the data, and the LAG function (new for SQL Server 2012) has been used in the end, as it allows referencing of previous records.
We can create a function as this
CREATE Function [dbo].[fn_CSVToTable]
(
#CSVList Varchar(max)
)
RETURNS #Table TABLE (ColumnData VARCHAR(100))
AS
BEGIN
IF RIGHT(#CSVList, 1) <> ','
SELECT #CSVList = #CSVList + ','
DECLARE #Pos BIGINT,
#OldPos BIGINT
SELECT #Pos = 1,
#OldPos = 1
WHILE #Pos < LEN(#CSVList)
BEGIN
SELECT #Pos = CHARINDEX(',', #CSVList, #OldPos)
INSERT INTO #Table
SELECT LTRIM(RTRIM(SUBSTRING(#CSVList, #OldPos, #Pos - #OldPos))) Col001
SELECT #OldPos = #Pos + 1
END
RETURN
END
We can then seperate the CSV values into our respective columns using a SELECT statement
You can use a table-valued function STRING_SPLIT, which is available only under compatibility level 130. If your database compatibility level is lower than 130, SQL Server will not be able to find and execute the STRING_SPLIT function. You can change a compatibility level of the database using the following command:
ALTER DATABASE DatabaseName SET COMPATIBILITY_LEVEL = 130
Syntax
SELECT * FROM STRING_SPLIT ( string, separator )
see documentation here
I think following function will work for you:
You have to create a function in SQL first. Like this
CREATE FUNCTION [dbo].[fn_split](
#str VARCHAR(MAX),
#delimiter CHAR(1)
)
RETURNS #returnTable TABLE (idx INT PRIMARY KEY IDENTITY, item VARCHAR(8000))
AS
BEGIN
DECLARE #pos INT
SELECT #str = #str + #delimiter
WHILE LEN(#str) > 0
BEGIN
SELECT #pos = CHARINDEX(#delimiter,#str)
IF #pos = 1
INSERT #returnTable (item)
VALUES (NULL)
ELSE
INSERT #returnTable (item)
VALUES (SUBSTRING(#str, 1, #pos-1))
SELECT #str = SUBSTRING(#str, #pos+1, LEN(#str)-#pos)
END
RETURN
END
You can call this function, like this:
select * from fn_split('1,24,5',',')
Implementation:
Declare #test TABLE (
ID VARCHAR(200),
Data VARCHAR(200)
)
insert into #test
(ID, Data)
Values
('1','Cleo,Smith')
insert into #test
(ID, Data)
Values
('2','Paul,Grim')
select ID,
(select item from fn_split(Data,',') where idx in (1)) as Name ,
(select item from fn_split(Data,',') where idx in (2)) as Surname
from #test
Result will like this:
Use Parsename() function
with cte as(
select 'Aria,Karimi' as FullName
Union
select 'Joe,Karimi' as FullName
Union
select 'Bab,Karimi' as FullName
)
SELECT PARSENAME(REPLACE(FullName,',','.'),2) as Name,
PARSENAME(REPLACE(FullName,',','.'),1) as Family
FROM cte
Result
Name Family
----- ------
Aria Karimi
Bab Karimi
Joe Karimi
Try this:
declare #csv varchar(100) ='aaa,bb,csda,daass';
set #csv = #csv+',';
with cte as
(
select SUBSTRING(#csv,1,charindex(',',#csv,1)-1) as val, SUBSTRING(#csv,charindex(',',#csv,1)+1,len(#csv)) as rem
UNION ALL
select SUBSTRING(a.rem,1,charindex(',',a.rem,1)-1)as val, SUBSTRING(a.rem,charindex(',',a.rem,1)+1,len(A.rem))
from cte a where LEN(a.rem)>=1
) select val from cte
This function is most fast:
CREATE FUNCTION dbo.F_ExtractSubString
(
#String VARCHAR(MAX),
#NroSubString INT,
#Separator VARCHAR(5)
)
RETURNS VARCHAR(MAX) AS
BEGIN
DECLARE #St INT = 0, #End INT = 0, #Ret VARCHAR(MAX)
SET #String = #String + #Separator
WHILE CHARINDEX(#Separator, #String, #End + 1) > 0 AND #NroSubString > 0
BEGIN
SET #St = #End + 1
SET #End = CHARINDEX(#Separator, #String, #End + 1)
SET #NroSubString = #NroSubString - 1
END
IF #NroSubString > 0
SET #Ret = ''
ELSE
SET #Ret = SUBSTRING(#String, #St, #End - #St)
RETURN #Ret
END
GO
Example usage:
SELECT dbo.F_ExtractSubString(COLUMN, 1, ', '),
dbo.F_ExtractSubString(COLUMN, 2, ', '),
dbo.F_ExtractSubString(COLUMN, 3, ', ')
FROM TABLE
I encountered a similar problem but a complex one and since this is the first thread i found regarding that issue i decided to post my finding. i know it is complex solution to a simple problem but i hope that i could help other people who go to this thread looking for a more complex solution. i had to split a string containing 5 numbers (column name: levelsFeed) and to show each number in a separate column.
for example: 8,1,2,2,2
should be shown as :
1 2 3 4 5
-------------
8 1 2 2 2
Solution 1: using XML functions:
this solution for the slowest solution by far
SELECT Distinct FeedbackID,
, S.a.value('(/H/r)[1]', 'INT') AS level1
, S.a.value('(/H/r)[2]', 'INT') AS level2
, S.a.value('(/H/r)[3]', 'INT') AS level3
, S.a.value('(/H/r)[4]', 'INT') AS level4
, S.a.value('(/H/r)[5]', 'INT') AS level5
FROM (
SELECT *,CAST (N'<H><r>' + REPLACE(levelsFeed, ',', '</r><r>') + '</r> </H>' AS XML) AS [vals]
FROM Feedbacks
) as d
CROSS APPLY d.[vals].nodes('/H/r') S(a)
Solution 2: using Split function and pivot. (the split function split a string to rows with the column name Data)
SELECT FeedbackID, [1],[2],[3],[4],[5]
FROM (
SELECT *, ROW_NUMBER() OVER (PARTITION BY feedbackID ORDER BY (SELECT null)) as rn
FROM (
SELECT FeedbackID, levelsFeed
FROM Feedbacks
) as a
CROSS APPLY dbo.Split(levelsFeed, ',')
) as SourceTable
PIVOT
(
MAX(data)
FOR rn IN ([1],[2],[3],[4],[5])
)as pivotTable
Solution 3: using string manipulations functions - fastest by small margin over solution 2
SELECT FeedbackID,
SUBSTRING(levelsFeed,0,CHARINDEX(',',levelsFeed)) AS level1,
PARSENAME(REPLACE(SUBSTRING(levelsFeed,CHARINDEX(',',levelsFeed)+1,LEN(levelsFeed)),',','.'),4) AS level2,
PARSENAME(REPLACE(SUBSTRING(levelsFeed,CHARINDEX(',',levelsFeed)+1,LEN(levelsFeed)),',','.'),3) AS level3,
PARSENAME(REPLACE(SUBSTRING(levelsFeed,CHARINDEX(',',levelsFeed)+1,LEN(levelsFeed)),',','.'),2) AS level4,
PARSENAME(REPLACE(SUBSTRING(levelsFeed,CHARINDEX(',',levelsFeed)+1,LEN(levelsFeed)),',','.'),1) AS level5
FROM Feedbacks
since the levelsFeed contains 5 string values i needed to use the substring function for the first string.
i hope that my solution will help other that got to this thread looking for a more complex split to columns methods
Using instring function :)
select Value,
substring(String,1,instr(String," ") -1) Fname,
substring(String,instr(String,",") +1) Sname
from tablename;
Used two functions,
1. substring(string, position, length) ==> returns string from positon to length
2. instr(string,pattern) ==> returns position of pattern.
If we don’t provide length argument in substring it returns until end of string
This worked for me
CREATE FUNCTION [dbo].[SplitString](
#delimited NVARCHAR(MAX),
#delimiter NVARCHAR(100)
) RETURNS #t TABLE ( val NVARCHAR(MAX))
AS
BEGIN
DECLARE #xml XML
SET #xml = N'<t>' + REPLACE(#delimited,#delimiter,'</t><t>') + '</t>'
INSERT INTO #t(val)
SELECT r.value('.','varchar(MAX)') as item
FROM #xml.nodes('/t') as records(r)
RETURN
END
mytable:
Value ColOne
--------------------
1 Cleo, Smith
The following should work if there aren't too many columns
ALTER TABLE mytable ADD ColTwo nvarchar(256);
UPDATE mytable SET ColTwo = LEFT(ColOne, Charindex(',', ColOne) - 1);
--'Cleo' = LEFT('Cleo, Smith', Charindex(',', 'Cleo, Smith') - 1)
UPDATE mytable SET ColTwo = REPLACE(ColOne, ColTwo + ',', '');
--' Smith' = REPLACE('Cleo, Smith', 'Cleo' + ',')
UPDATE mytable SET ColOne = REPLACE(ColOne, ',' + ColTwo, ''), ColTwo = LTRIM(ColTwo);
--'Cleo' = REPLACE('Cleo, Smith', ',' + ' Smith', '')
Result:
Value ColOne ColTwo
--------------------
1 Cleo Smith
DECLARE #INPUT VARCHAR (MAX)='N,A,R,E,N,D,R,A'
DECLARE #ELIMINATE_CHAR CHAR (1)=','
DECLARE #L_START INT=1
DECLARE #L_END INT=(SELECT LEN (#INPUT))
DECLARE #OUTPUT CHAR (1)
WHILE #L_START <=#L_END
BEGIN
SET #OUTPUT=(SUBSTRING (#INPUT,#L_START,1))
IF #OUTPUT!=#ELIMINATE_CHAR
BEGIN
PRINT #OUTPUT
END
SET #L_START=#L_START+1
END
You may find the solution in SQL User Defined Function to Parse a Delimited String helpful (from The Code Project).
This is the code part from this page:
CREATE FUNCTION [fn_ParseText2Table]
(#p_SourceText VARCHAR(MAX)
,#p_Delimeter VARCHAR(100)=',' --default to comma delimited.
)
RETURNS #retTable
TABLE([Position] INT IDENTITY(1,1)
,[Int_Value] INT
,[Num_Value] NUMERIC(18,3)
,[Txt_Value] VARCHAR(MAX)
,[Date_value] DATETIME
)
AS
/*
********************************************************************************
Purpose: Parse values from a delimited string
& return the result as an indexed table
Copyright 1996, 1997, 2000, 2003 Clayton Groom (Clayton_Groom#hotmail.com)
Posted to the public domain Aug, 2004
2003-06-17 Rewritten as SQL 2000 function.
Reworked to allow for delimiters > 1 character in length
and to convert Text values to numbers
2016-04-05 Added logic for date values based on "new" ISDATE() function, Updated to use XML approach, which is more efficient.
********************************************************************************
*/
BEGIN
DECLARE #w_xml xml;
SET #w_xml = N'<root><i>' + replace(#p_SourceText, #p_Delimeter,'</i><i>') + '</i></root>';
INSERT INTO #retTable
([Int_Value]
, [Num_Value]
, [Txt_Value]
, [Date_value]
)
SELECT CASE
WHEN ISNUMERIC([i].value('.', 'VARCHAR(MAX)')) = 1
THEN CAST(CAST([i].value('.', 'VARCHAR(MAX)') AS NUMERIC) AS INT)
END AS [Int_Value]
, CASE
WHEN ISNUMERIC([i].value('.', 'VARCHAR(MAX)')) = 1
THEN CAST([i].value('.', 'VARCHAR(MAX)') AS NUMERIC(18, 3))
END AS [Num_Value]
, [i].value('.', 'VARCHAR(MAX)') AS [txt_Value]
, CASE
WHEN ISDATE([i].value('.', 'VARCHAR(MAX)')) = 1
THEN CAST([i].value('.', 'VARCHAR(MAX)') AS DATETIME)
END AS [Num_Value]
FROM #w_xml.nodes('//root/i') AS [Items]([i]);
RETURN;
END;
GO
ALTER function get_occurance_index(#delimiter varchar(1),#occurence int,#String varchar(100))
returns int
AS Begin
--Declare #delimiter varchar(1)=',',#occurence int=2,#String varchar(100)='a,b,c'
Declare #result int
;with T as (
select 1 Rno,0 as row, charindex(#delimiter, #String) pos,#String st
union all
select Rno+1,pos + 1, charindex(#delimiter, #String, pos + 1), #String
from T
where pos > 0
)
select #result=pos
from T
where pos > 0 and rno = #occurence
return isnull(#result,0)
ENd
declare #data as table (data varchar(100))
insert into #data values('1,2,3')
insert into #data values('aaa,bbbbb,cccc')
select top 3 Substring (data,0,dbo.get_occurance_index( ',',1,data)) ,--First Record always starts with 0
Substring (data,dbo.get_occurance_index( ',',1,data)+1,dbo.get_occurance_index( ',',2,data)-dbo.get_occurance_index( ',',1,data)-1) ,
Substring (data,dbo.get_occurance_index( ',',2,data)+1,len(data)) , -- Last record cant be more than len of actual data
data
From #data
I found that using PARSENAME as above caused any name with a period to get nulled.
So if there was an initial or a title in the name followed by a dot they return NULL.
I found this worked for me:
SELECT
REPLACE(SUBSTRING(FullName, 1,CHARINDEX(',', FullName)), ',','') as Name,
REPLACE(SUBSTRING(FullName, CHARINDEX(',', FullName), LEN(FullName)), ',', '') as Surname
FROM Table1
it is so easy, you can take it by below query:
DECLARE #str NVARCHAR(MAX)='ControlID_05436b78-04ba-9667-fa01-9ff8c1b7c235,3'
SELECT LEFT(#str, CHARINDEX(',',#str)-1),RIGHT(#str,LEN(#str)-(CHARINDEX(',',#str)))
select distinct modelFileId,F4.*
from contract
cross apply (select XmlList=convert(xml, '<x>'+replace(modelFileId,';','</x><x>')+'</x>').query('.')) F2
cross apply (select mfid1=XmlNode.value('/x[1]','varchar(512)')
,mfid2=XmlNode.value('/x[2]','varchar(512)')
,mfid3=XmlNode.value('/x[3]','varchar(512)')
,mfid4=XmlNode.value('/x[4]','varchar(512)') from XmlList.nodes('x') F3(XmlNode)) F4
where modelFileId like '%;%'
order by modelFileId
Select distinct PROJ_UID,PROJ_NAME,RES_UID from E2E_ProjectWiseTimesheetActuals
where CHARINDEX(','+cast(PROJ_UID as varchar(8000))+',', #params) > 0 and CHARINDEX(','+cast(RES_UID as varchar(8000))+',', #res) > 0
I re-wrote an answer above and made it better:
CREATE FUNCTION [dbo].[CSVParser]
(
#s VARCHAR(255),
#idx NUMERIC
)
RETURNS VARCHAR(12)
BEGIN
DECLARE #comma int
SET #comma = CHARINDEX(',', #s)
WHILE 1=1
BEGIN
IF #comma=0
IF #idx=1
RETURN #s
ELSE
RETURN ''
IF #idx=1
BEGIN
DECLARE #word VARCHAR(12)
SET #word=LEFT(#s, #comma - 1)
RETURN #word
END
SET #s = RIGHT(#s,LEN(#s)-#comma)
SET #comma = CHARINDEX(',', #s)
SET #idx = #idx - 1
END
RETURN 'not used'
END
Example usage:
SELECT dbo.CSVParser(COLUMN, 1),
dbo.CSVParser(COLUMN, 2),
dbo.CSVParser(COLUMN, 3)
FROM TABLE
question is simple, but problem is hot :)
So I create some wrapper for string_split() which pivot result in more generic way. It's table function which returns values (nn, value1, value2, ... , value50) - enough for most CSV lines. If there are more values, they will wrap to next line - nn indicate line number. Set third parameter #columnCnt = [yourNumber] to wrap at specific position:
alter FUNCTION fn_Split50
(
#str varchar(max),
#delim char(1),
#columnCnt int = 50
)
RETURNS TABLE
AS
RETURN
(
SELECT *
FROM (SELECT
nn = (nn - 1) / #columnCnt + 1,
nnn = 'value' + cast(((nn - 1) % #columnCnt) + 1 as varchar(10)),
value
FROM (SELECT
nn = ROW_NUMBER() over (order by (select null)),
value
FROM string_split(#str, #delim) aa
) aa
where nn > 0
) bb
PIVOT
(
max(value)
FOR nnn IN (
value1, value2, value3, value4, value5, value6, value7, value8, value9, value10,
value11, value12, value13, value14, value15, value16, value17, value18, value19, value20,
value21, value22, value23, value24, value25, value26, value27, value28, value29, value30,
value31, value32, value33, value34, value35, value36, value37, value38, value39, value40,
value41, value42, value43, value44, value45, value46, value47, value48, value49, value50
)
) AS PivotTable
)
Example of using:
select * from dbo.fn_split50('zz1,aa2,ss3,dd4,ff5', ',', DEFAULT)
select * from dbo.fn_split50('zz1,aa2,ss3,dd4,ff5,gg6,hh7,jj8,ww9,qq10', ',', 3)
select * from dbo.fn_split50('zz1,11,aa2,22,ss3,33,dd4,44,ff5,55,gg6,66,hh7,77,jj8,88,ww9,99,qq10,1010', ',',2)
Hope, it will helps :)

Regular Expression to split a field into two [duplicate]

I have a table like this
Value String
-------------------
1 Cleo, Smith
I want to separate the comma delimited string into two columns
Value Name Surname
-------------------
1 Cleo Smith
I need only two fixed extra columns
Your purpose can be solved using following query -
Select Value , Substring(FullName, 1,Charindex(',', FullName)-1) as Name,
Substring(FullName, Charindex(',', FullName)+1, LEN(FullName)) as Surname
from Table1
There is no readymade Split function in sql server, so we need to create user defined function.
CREATE FUNCTION Split (
#InputString VARCHAR(8000),
#Delimiter VARCHAR(50)
)
RETURNS #Items TABLE (
Item VARCHAR(8000)
)
AS
BEGIN
IF #Delimiter = ' '
BEGIN
SET #Delimiter = ','
SET #InputString = REPLACE(#InputString, ' ', #Delimiter)
END
IF (#Delimiter IS NULL OR #Delimiter = '')
SET #Delimiter = ','
--INSERT INTO #Items VALUES (#Delimiter) -- Diagnostic
--INSERT INTO #Items VALUES (#InputString) -- Diagnostic
DECLARE #Item VARCHAR(8000)
DECLARE #ItemList VARCHAR(8000)
DECLARE #DelimIndex INT
SET #ItemList = #InputString
SET #DelimIndex = CHARINDEX(#Delimiter, #ItemList, 0)
WHILE (#DelimIndex != 0)
BEGIN
SET #Item = SUBSTRING(#ItemList, 0, #DelimIndex)
INSERT INTO #Items VALUES (#Item)
-- Set #ItemList = #ItemList minus one less item
SET #ItemList = SUBSTRING(#ItemList, #DelimIndex+1, LEN(#ItemList)-#DelimIndex)
SET #DelimIndex = CHARINDEX(#Delimiter, #ItemList, 0)
END -- End WHILE
IF #Item IS NOT NULL -- At least one delimiter was encountered in #InputString
BEGIN
SET #Item = #ItemList
INSERT INTO #Items VALUES (#Item)
END
-- No delimiters were encountered in #InputString, so just return #InputString
ELSE INSERT INTO #Items VALUES (#InputString)
RETURN
END -- End Function
GO
---- Set Permissions
--GRANT SELECT ON Split TO UserRole1
--GRANT SELECT ON Split TO UserRole2
--GO
;WITH Split_Names (Value,Name, xmlname)
AS
(
SELECT Value,
Name,
CONVERT(XML,'<Names><name>'
+ REPLACE(Name,',', '</name><name>') + '</name></Names>') AS xmlname
FROM tblnames
)
SELECT Value,
xmlname.value('/Names[1]/name[1]','varchar(100)') AS Name,
xmlname.value('/Names[1]/name[2]','varchar(100)') AS Surname
FROM Split_Names
and also check the link below for reference
http://jahaines.blogspot.in/2009/06/converting-delimited-string-of-values.html
xml based answer is simple and clean
refer this
DECLARE #S varchar(max),
#Split char(1),
#X xml
SELECT #S = 'ab,cd,ef,gh,ij',
#Split = ','
SELECT #X = CONVERT(xml,' <root> <myvalue>' +
REPLACE(#S,#Split,'</myvalue> <myvalue>') + '</myvalue> </root> ')
SELECT T.c.value('.','varchar(20)'), --retrieve ALL values at once
T.c.value('(/root/myvalue)[1]','VARCHAR(20)') , --retrieve index 1 only, which is the 'ab'
T.c.value('(/root/myvalue)[2]','VARCHAR(20)')
FROM #X.nodes('/root/myvalue') T(c)
I think this is cool
SELECT value,
PARSENAME(REPLACE(String,',','.'),2) 'Name' ,
PARSENAME(REPLACE(String,',','.'),1) 'Surname'
FROM table WITH (NOLOCK)
With CROSS APPLY
select ParsedData.*
from MyTable mt
cross apply ( select str = mt.String + ',,' ) f1
cross apply ( select p1 = charindex( ',', str ) ) ap1
cross apply ( select p2 = charindex( ',', str, p1 + 1 ) ) ap2
cross apply ( select Nmame = substring( str, 1, p1-1 )
, Surname = substring( str, p1+1, p2-p1-1 )
) ParsedData
There are multiple ways to solve this and many different ways have been proposed already. Simplest would be to use LEFT / SUBSTRING and other string functions to achieve the desired result.
Sample Data
DECLARE #tbl1 TABLE (Value INT,String VARCHAR(MAX))
INSERT INTO #tbl1 VALUES(1,'Cleo, Smith');
INSERT INTO #tbl1 VALUES(2,'John, Mathew');
Using String Functions like LEFT
SELECT
Value,
LEFT(String,CHARINDEX(',',String)-1) as Fname,
LTRIM(RIGHT(String,LEN(String) - CHARINDEX(',',String) )) AS Lname
FROM #tbl1
This approach fails if there are more 2 items in a String.
In such a scenario, we can use a splitter and then use PIVOT or convert the string into an XML and use .nodes to get string items. XML based solution have been detailed out by aads and bvr in their solution.
The answers for this question which use splitter, all use WHILE which is inefficient for splitting. Check this performance comparison. One of the best splitters around is DelimitedSplit8K, created by Jeff Moden. You can read more about it here
Splitter with PIVOT
DECLARE #tbl1 TABLE (Value INT,String VARCHAR(MAX))
INSERT INTO #tbl1 VALUES(1,'Cleo, Smith');
INSERT INTO #tbl1 VALUES(2,'John, Mathew');
SELECT t3.Value,[1] as Fname,[2] as Lname
FROM #tbl1 as t1
CROSS APPLY [dbo].[DelimitedSplit8K](String,',') as t2
PIVOT(MAX(Item) FOR ItemNumber IN ([1],[2])) as t3
Output
Value Fname Lname
1 Cleo Smith
2 John Mathew
DelimitedSplit8K by Jeff Moden
CREATE FUNCTION [dbo].[DelimitedSplit8K]
/**********************************************************************************************************************
Purpose:
Split a given string at a given delimiter and return a list of the split elements (items).
Notes:
1. Leading a trailing delimiters are treated as if an empty string element were present.
2. Consecutive delimiters are treated as if an empty string element were present between them.
3. Except when spaces are used as a delimiter, all spaces present in each element are preserved.
Returns:
iTVF containing the following:
ItemNumber = Element position of Item as a BIGINT (not converted to INT to eliminate a CAST)
Item = Element value as a VARCHAR(8000)
Statistics on this function may be found at the following URL:
http://www.sqlservercentral.com/Forums/Topic1101315-203-4.aspx
CROSS APPLY Usage Examples and Tests:
--=====================================================================================================================
-- TEST 1:
-- This tests for various possible conditions in a string using a comma as the delimiter. The expected results are
-- laid out in the comments
--=====================================================================================================================
--===== Conditionally drop the test tables to make reruns easier for testing.
-- (this is NOT a part of the solution)
IF OBJECT_ID('tempdb..#JBMTest') IS NOT NULL DROP TABLE #JBMTest
;
--===== Create and populate a test table on the fly (this is NOT a part of the solution).
-- In the following comments, "b" is a blank and "E" is an element in the left to right order.
-- Double Quotes are used to encapsulate the output of "Item" so that you can see that all blanks
-- are preserved no matter where they may appear.
SELECT *
INTO #JBMTest
FROM ( --# & type of Return Row(s)
SELECT 0, NULL UNION ALL --1 NULL
SELECT 1, SPACE(0) UNION ALL --1 b (Empty String)
SELECT 2, SPACE(1) UNION ALL --1 b (1 space)
SELECT 3, SPACE(5) UNION ALL --1 b (5 spaces)
SELECT 4, ',' UNION ALL --2 b b (both are empty strings)
SELECT 5, '55555' UNION ALL --1 E
SELECT 6, ',55555' UNION ALL --2 b E
SELECT 7, ',55555,' UNION ALL --3 b E b
SELECT 8, '55555,' UNION ALL --2 b B
SELECT 9, '55555,1' UNION ALL --2 E E
SELECT 10, '1,55555' UNION ALL --2 E E
SELECT 11, '55555,4444,333,22,1' UNION ALL --5 E E E E E
SELECT 12, '55555,4444,,333,22,1' UNION ALL --6 E E b E E E
SELECT 13, ',55555,4444,,333,22,1,' UNION ALL --8 b E E b E E E b
SELECT 14, ',55555,4444,,,333,22,1,' UNION ALL --9 b E E b b E E E b
SELECT 15, ' 4444,55555 ' UNION ALL --2 E (w/Leading Space) E (w/Trailing Space)
SELECT 16, 'This,is,a,test.' --E E E E
) d (SomeID, SomeValue)
;
--===== Split the CSV column for the whole table using CROSS APPLY (this is the solution)
SELECT test.SomeID, test.SomeValue, split.ItemNumber, Item = QUOTENAME(split.Item,'"')
FROM #JBMTest test
CROSS APPLY dbo.DelimitedSplit8K(test.SomeValue,',') split
;
--=====================================================================================================================
-- TEST 2:
-- This tests for various "alpha" splits and COLLATION using all ASCII characters from 0 to 255 as a delimiter against
-- a given string. Note that not all of the delimiters will be visible and some will show up as tiny squares because
-- they are "control" characters. More specifically, this test will show you what happens to various non-accented
-- letters for your given collation depending on the delimiter you chose.
--=====================================================================================================================
WITH
cteBuildAllCharacters (String,Delimiter) AS
(
SELECT TOP 256
'ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789',
CHAR(ROW_NUMBER() OVER (ORDER BY (SELECT NULL))-1)
FROM master.sys.all_columns
)
SELECT ASCII_Value = ASCII(c.Delimiter), c.Delimiter, split.ItemNumber, Item = QUOTENAME(split.Item,'"')
FROM cteBuildAllCharacters c
CROSS APPLY dbo.DelimitedSplit8K(c.String,c.Delimiter) split
ORDER BY ASCII_Value, split.ItemNumber
;
-----------------------------------------------------------------------------------------------------------------------
Other Notes:
1. Optimized for VARCHAR(8000) or less. No testing or error reporting for truncation at 8000 characters is done.
2. Optimized for single character delimiter. Multi-character delimiters should be resolvedexternally from this
function.
3. Optimized for use with CROSS APPLY.
4. Does not "trim" elements just in case leading or trailing blanks are intended.
5. If you don't know how a Tally table can be used to replace loops, please see the following...
http://www.sqlservercentral.com/articles/T-SQL/62867/
6. Changing this function to use NVARCHAR(MAX) will cause it to run twice as slow. It's just the nature of
VARCHAR(MAX) whether it fits in-row or not.
7. Multi-machine testing for the method of using UNPIVOT instead of 10 SELECT/UNION ALLs shows that the UNPIVOT method
is quite machine dependent and can slow things down quite a bit.
-----------------------------------------------------------------------------------------------------------------------
Credits:
This code is the product of many people's efforts including but not limited to the following:
cteTally concept originally by Iztek Ben Gan and "decimalized" by Lynn Pettis (and others) for a bit of extra speed
and finally redacted by Jeff Moden for a different slant on readability and compactness. Hat's off to Paul White for
his simple explanations of CROSS APPLY and for his detailed testing efforts. Last but not least, thanks to
Ron "BitBucket" McCullough and Wayne Sheffield for their extreme performance testing across multiple machines and
versions of SQL Server. The latest improvement brought an additional 15-20% improvement over Rev 05. Special thanks
to "Nadrek" and "peter-757102" (aka Peter de Heer) for bringing such improvements to light. Nadrek's original
improvement brought about a 10% performance gain and Peter followed that up with the content of Rev 07.
I also thank whoever wrote the first article I ever saw on "numbers tables" which is located at the following URL
and to Adam Machanic for leading me to it many years ago.
http://sqlserver2000.databases.aspfaq.com/why-should-i-consider-using-an-auxiliary-numbers-table.html
-----------------------------------------------------------------------------------------------------------------------
Revision History:
Rev 00 - 20 Jan 2010 - Concept for inline cteTally: Lynn Pettis and others.
Redaction/Implementation: Jeff Moden
- Base 10 redaction and reduction for CTE. (Total rewrite)
Rev 01 - 13 Mar 2010 - Jeff Moden
- Removed one additional concatenation and one subtraction from the SUBSTRING in the SELECT List for that tiny
bit of extra speed.
Rev 02 - 14 Apr 2010 - Jeff Moden
- No code changes. Added CROSS APPLY usage example to the header, some additional credits, and extra
documentation.
Rev 03 - 18 Apr 2010 - Jeff Moden
- No code changes. Added notes 7, 8, and 9 about certain "optimizations" that don't actually work for this
type of function.
Rev 04 - 29 Jun 2010 - Jeff Moden
- Added WITH SCHEMABINDING thanks to a note by Paul White. This prevents an unnecessary "Table Spool" when the
function is used in an UPDATE statement even though the function makes no external references.
Rev 05 - 02 Apr 2011 - Jeff Moden
- Rewritten for extreme performance improvement especially for larger strings approaching the 8K boundary and
for strings that have wider elements. The redaction of this code involved removing ALL concatenation of
delimiters, optimization of the maximum "N" value by using TOP instead of including it in the WHERE clause,
and the reduction of all previous calculations (thanks to the switch to a "zero based" cteTally) to just one
instance of one add and one instance of a subtract. The length calculation for the final element (not
followed by a delimiter) in the string to be split has been greatly simplified by using the ISNULL/NULLIF
combination to determine when the CHARINDEX returned a 0 which indicates there are no more delimiters to be
had or to start with. Depending on the width of the elements, this code is between 4 and 8 times faster on a
single CPU box than the original code especially near the 8K boundary.
- Modified comments to include more sanity checks on the usage example, etc.
- Removed "other" notes 8 and 9 as they were no longer applicable.
Rev 06 - 12 Apr 2011 - Jeff Moden
- Based on a suggestion by Ron "Bitbucket" McCullough, additional test rows were added to the sample code and
the code was changed to encapsulate the output in pipes so that spaces and empty strings could be perceived
in the output. The first "Notes" section was added. Finally, an extra test was added to the comments above.
Rev 07 - 06 May 2011 - Peter de Heer, a further 15-20% performance enhancement has been discovered and incorporated
into this code which also eliminated the need for a "zero" position in the cteTally table.
**********************************************************************************************************************/
--===== Define I/O parameters
(#pString VARCHAR(8000), #pDelimiter CHAR(1))
RETURNS TABLE WITH SCHEMABINDING AS
RETURN
--===== "Inline" CTE Driven "Tally Table" produces values from 0 up to 10,000...
-- enough to cover NVARCHAR(4000)
WITH E1(N) AS (
SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1 UNION ALL
SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1 UNION ALL
SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1 UNION ALL SELECT 1
), --10E+1 or 10 rows
E2(N) AS (SELECT 1 FROM E1 a, E1 b), --10E+2 or 100 rows
E4(N) AS (SELECT 1 FROM E2 a, E2 b), --10E+4 or 10,000 rows max
cteTally(N) AS (--==== This provides the "base" CTE and limits the number of rows right up front
-- for both a performance gain and prevention of accidental "overruns"
SELECT TOP (ISNULL(DATALENGTH(#pString),0)) ROW_NUMBER() OVER (ORDER BY (SELECT NULL)) FROM E4
),
cteStart(N1) AS (--==== This returns N+1 (starting position of each "element" just once for each delimiter)
SELECT 1 UNION ALL
SELECT t.N+1 FROM cteTally t WHERE SUBSTRING(#pString,t.N,1) = #pDelimiter
),
cteLen(N1,L1) AS(--==== Return start and length (for use in substring)
SELECT s.N1,
ISNULL(NULLIF(CHARINDEX(#pDelimiter,#pString,s.N1),0)-s.N1,8000)
FROM cteStart s
)
--===== Do the actual split. The ISNULL/NULLIF combo handles the length for the final element when no delimiter is found.
SELECT ItemNumber = ROW_NUMBER() OVER(ORDER BY l.N1),
Item = SUBSTRING(#pString, l.N1, l.L1)
FROM cteLen l
;
GO
With SQL Server 2016 we can use string_split to accomplish this:
create table commasep (
id int identity(1,1)
,string nvarchar(100) )
insert into commasep (string) values ('John, Adam'), ('test1,test2,test3')
select id, [value] as String from commasep
cross apply string_split(string,',')
CREATE FUNCTION [dbo].[fn_split_string_to_column] (
#string NVARCHAR(MAX),
#delimiter CHAR(1)
)
RETURNS #out_put TABLE (
[column_id] INT IDENTITY(1, 1) NOT NULL,
[value] NVARCHAR(MAX)
)
AS
BEGIN
DECLARE #value NVARCHAR(MAX),
#pos INT = 0,
#len INT = 0
SET #string = CASE
WHEN RIGHT(#string, 1) != #delimiter
THEN #string + #delimiter
ELSE #string
END
WHILE CHARINDEX(#delimiter, #string, #pos + 1) > 0
BEGIN
SET #len = CHARINDEX(#delimiter, #string, #pos + 1) - #pos
SET #value = SUBSTRING(#string, #pos, #len)
INSERT INTO #out_put ([value])
SELECT LTRIM(RTRIM(#value)) AS [column]
SET #pos = CHARINDEX(#delimiter, #string, #pos + #len) + 1
END
RETURN
END
SELECT id,
Substring(NAME, 0, Charindex(',', NAME)) AS firstname,
Substring(NAME, Charindex(',', NAME), Len(NAME) + 1) AS lastname
FROM spilt
Try this (change instances of ' ' to ',' or whatever delimiter you want to use)
CREATE FUNCTION dbo.Wordparser
(
#multiwordstring VARCHAR(255),
#wordnumber NUMERIC
)
returns VARCHAR(255)
AS
BEGIN
DECLARE #remainingstring VARCHAR(255)
SET #remainingstring=#multiwordstring
DECLARE #numberofwords NUMERIC
SET #numberofwords=(LEN(#remainingstring) - LEN(REPLACE(#remainingstring, ' ', '')) + 1)
DECLARE #word VARCHAR(50)
DECLARE #parsedwords TABLE
(
line NUMERIC IDENTITY(1, 1),
word VARCHAR(255)
)
WHILE #numberofwords > 1
BEGIN
SET #word=LEFT(#remainingstring, CHARINDEX(' ', #remainingstring) - 1)
INSERT INTO #parsedwords(word)
SELECT #word
SET #remainingstring= REPLACE(#remainingstring, Concat(#word, ' '), '')
SET #numberofwords=(LEN(#remainingstring) - LEN(REPLACE(#remainingstring, ' ', '')) + 1)
IF #numberofwords = 1
BREAK
ELSE
CONTINUE
END
IF #numberofwords = 1
SELECT #word = #remainingstring
INSERT INTO #parsedwords(word)
SELECT #word
RETURN
(SELECT word
FROM #parsedwords
WHERE line = #wordnumber)
END
Example usage:
SELECT dbo.Wordparser(COLUMN, 1),
dbo.Wordparser(COLUMN, 2),
dbo.Wordparser(COLUMN, 3)
FROM TABLE
I think PARSENAME is the neat function to use for this example, as described in this article: http://www.sqlshack.com/parsing-and-rotating-delimited-data-in-sql-server-2012/
The PARSENAME function is logically designed to parse four-part object names. The nice thing about PARSENAME is that it’s not limited to parsing just SQL Server four-part object names – it will parse any function or string data that is delimited by dots.
The first parameter is the object to parse, and the second is the integer value of the object piece to return. The article is discussing parsing and rotating delimited data - company phone numbers, but it can be used to parse name/surname data also.
Example:
USE COMPANY;
SELECT PARSENAME('Whatever.you.want.parsed',3) AS 'ReturnValue';
The article also describes using a Common Table Expression (CTE) called ‘replaceChars’, to run PARSENAME against the delimiter-replaced values. A CTE is useful for returning a temporary view or result set.
After that, the UNPIVOT function has been used to convert some columns into rows; SUBSTRING and CHARINDEX functions have been used for cleaning up the inconsistencies in the data, and the LAG function (new for SQL Server 2012) has been used in the end, as it allows referencing of previous records.
We can create a function as this
CREATE Function [dbo].[fn_CSVToTable]
(
#CSVList Varchar(max)
)
RETURNS #Table TABLE (ColumnData VARCHAR(100))
AS
BEGIN
IF RIGHT(#CSVList, 1) <> ','
SELECT #CSVList = #CSVList + ','
DECLARE #Pos BIGINT,
#OldPos BIGINT
SELECT #Pos = 1,
#OldPos = 1
WHILE #Pos < LEN(#CSVList)
BEGIN
SELECT #Pos = CHARINDEX(',', #CSVList, #OldPos)
INSERT INTO #Table
SELECT LTRIM(RTRIM(SUBSTRING(#CSVList, #OldPos, #Pos - #OldPos))) Col001
SELECT #OldPos = #Pos + 1
END
RETURN
END
We can then seperate the CSV values into our respective columns using a SELECT statement
You can use a table-valued function STRING_SPLIT, which is available only under compatibility level 130. If your database compatibility level is lower than 130, SQL Server will not be able to find and execute the STRING_SPLIT function. You can change a compatibility level of the database using the following command:
ALTER DATABASE DatabaseName SET COMPATIBILITY_LEVEL = 130
Syntax
SELECT * FROM STRING_SPLIT ( string, separator )
see documentation here
I think following function will work for you:
You have to create a function in SQL first. Like this
CREATE FUNCTION [dbo].[fn_split](
#str VARCHAR(MAX),
#delimiter CHAR(1)
)
RETURNS #returnTable TABLE (idx INT PRIMARY KEY IDENTITY, item VARCHAR(8000))
AS
BEGIN
DECLARE #pos INT
SELECT #str = #str + #delimiter
WHILE LEN(#str) > 0
BEGIN
SELECT #pos = CHARINDEX(#delimiter,#str)
IF #pos = 1
INSERT #returnTable (item)
VALUES (NULL)
ELSE
INSERT #returnTable (item)
VALUES (SUBSTRING(#str, 1, #pos-1))
SELECT #str = SUBSTRING(#str, #pos+1, LEN(#str)-#pos)
END
RETURN
END
You can call this function, like this:
select * from fn_split('1,24,5',',')
Implementation:
Declare #test TABLE (
ID VARCHAR(200),
Data VARCHAR(200)
)
insert into #test
(ID, Data)
Values
('1','Cleo,Smith')
insert into #test
(ID, Data)
Values
('2','Paul,Grim')
select ID,
(select item from fn_split(Data,',') where idx in (1)) as Name ,
(select item from fn_split(Data,',') where idx in (2)) as Surname
from #test
Result will like this:
Use Parsename() function
with cte as(
select 'Aria,Karimi' as FullName
Union
select 'Joe,Karimi' as FullName
Union
select 'Bab,Karimi' as FullName
)
SELECT PARSENAME(REPLACE(FullName,',','.'),2) as Name,
PARSENAME(REPLACE(FullName,',','.'),1) as Family
FROM cte
Result
Name Family
----- ------
Aria Karimi
Bab Karimi
Joe Karimi
Try this:
declare #csv varchar(100) ='aaa,bb,csda,daass';
set #csv = #csv+',';
with cte as
(
select SUBSTRING(#csv,1,charindex(',',#csv,1)-1) as val, SUBSTRING(#csv,charindex(',',#csv,1)+1,len(#csv)) as rem
UNION ALL
select SUBSTRING(a.rem,1,charindex(',',a.rem,1)-1)as val, SUBSTRING(a.rem,charindex(',',a.rem,1)+1,len(A.rem))
from cte a where LEN(a.rem)>=1
) select val from cte
This function is most fast:
CREATE FUNCTION dbo.F_ExtractSubString
(
#String VARCHAR(MAX),
#NroSubString INT,
#Separator VARCHAR(5)
)
RETURNS VARCHAR(MAX) AS
BEGIN
DECLARE #St INT = 0, #End INT = 0, #Ret VARCHAR(MAX)
SET #String = #String + #Separator
WHILE CHARINDEX(#Separator, #String, #End + 1) > 0 AND #NroSubString > 0
BEGIN
SET #St = #End + 1
SET #End = CHARINDEX(#Separator, #String, #End + 1)
SET #NroSubString = #NroSubString - 1
END
IF #NroSubString > 0
SET #Ret = ''
ELSE
SET #Ret = SUBSTRING(#String, #St, #End - #St)
RETURN #Ret
END
GO
Example usage:
SELECT dbo.F_ExtractSubString(COLUMN, 1, ', '),
dbo.F_ExtractSubString(COLUMN, 2, ', '),
dbo.F_ExtractSubString(COLUMN, 3, ', ')
FROM TABLE
I encountered a similar problem but a complex one and since this is the first thread i found regarding that issue i decided to post my finding. i know it is complex solution to a simple problem but i hope that i could help other people who go to this thread looking for a more complex solution. i had to split a string containing 5 numbers (column name: levelsFeed) and to show each number in a separate column.
for example: 8,1,2,2,2
should be shown as :
1 2 3 4 5
-------------
8 1 2 2 2
Solution 1: using XML functions:
this solution for the slowest solution by far
SELECT Distinct FeedbackID,
, S.a.value('(/H/r)[1]', 'INT') AS level1
, S.a.value('(/H/r)[2]', 'INT') AS level2
, S.a.value('(/H/r)[3]', 'INT') AS level3
, S.a.value('(/H/r)[4]', 'INT') AS level4
, S.a.value('(/H/r)[5]', 'INT') AS level5
FROM (
SELECT *,CAST (N'<H><r>' + REPLACE(levelsFeed, ',', '</r><r>') + '</r> </H>' AS XML) AS [vals]
FROM Feedbacks
) as d
CROSS APPLY d.[vals].nodes('/H/r') S(a)
Solution 2: using Split function and pivot. (the split function split a string to rows with the column name Data)
SELECT FeedbackID, [1],[2],[3],[4],[5]
FROM (
SELECT *, ROW_NUMBER() OVER (PARTITION BY feedbackID ORDER BY (SELECT null)) as rn
FROM (
SELECT FeedbackID, levelsFeed
FROM Feedbacks
) as a
CROSS APPLY dbo.Split(levelsFeed, ',')
) as SourceTable
PIVOT
(
MAX(data)
FOR rn IN ([1],[2],[3],[4],[5])
)as pivotTable
Solution 3: using string manipulations functions - fastest by small margin over solution 2
SELECT FeedbackID,
SUBSTRING(levelsFeed,0,CHARINDEX(',',levelsFeed)) AS level1,
PARSENAME(REPLACE(SUBSTRING(levelsFeed,CHARINDEX(',',levelsFeed)+1,LEN(levelsFeed)),',','.'),4) AS level2,
PARSENAME(REPLACE(SUBSTRING(levelsFeed,CHARINDEX(',',levelsFeed)+1,LEN(levelsFeed)),',','.'),3) AS level3,
PARSENAME(REPLACE(SUBSTRING(levelsFeed,CHARINDEX(',',levelsFeed)+1,LEN(levelsFeed)),',','.'),2) AS level4,
PARSENAME(REPLACE(SUBSTRING(levelsFeed,CHARINDEX(',',levelsFeed)+1,LEN(levelsFeed)),',','.'),1) AS level5
FROM Feedbacks
since the levelsFeed contains 5 string values i needed to use the substring function for the first string.
i hope that my solution will help other that got to this thread looking for a more complex split to columns methods
Using instring function :)
select Value,
substring(String,1,instr(String," ") -1) Fname,
substring(String,instr(String,",") +1) Sname
from tablename;
Used two functions,
1. substring(string, position, length) ==> returns string from positon to length
2. instr(string,pattern) ==> returns position of pattern.
If we don’t provide length argument in substring it returns until end of string
This worked for me
CREATE FUNCTION [dbo].[SplitString](
#delimited NVARCHAR(MAX),
#delimiter NVARCHAR(100)
) RETURNS #t TABLE ( val NVARCHAR(MAX))
AS
BEGIN
DECLARE #xml XML
SET #xml = N'<t>' + REPLACE(#delimited,#delimiter,'</t><t>') + '</t>'
INSERT INTO #t(val)
SELECT r.value('.','varchar(MAX)') as item
FROM #xml.nodes('/t') as records(r)
RETURN
END
mytable:
Value ColOne
--------------------
1 Cleo, Smith
The following should work if there aren't too many columns
ALTER TABLE mytable ADD ColTwo nvarchar(256);
UPDATE mytable SET ColTwo = LEFT(ColOne, Charindex(',', ColOne) - 1);
--'Cleo' = LEFT('Cleo, Smith', Charindex(',', 'Cleo, Smith') - 1)
UPDATE mytable SET ColTwo = REPLACE(ColOne, ColTwo + ',', '');
--' Smith' = REPLACE('Cleo, Smith', 'Cleo' + ',')
UPDATE mytable SET ColOne = REPLACE(ColOne, ',' + ColTwo, ''), ColTwo = LTRIM(ColTwo);
--'Cleo' = REPLACE('Cleo, Smith', ',' + ' Smith', '')
Result:
Value ColOne ColTwo
--------------------
1 Cleo Smith
DECLARE #INPUT VARCHAR (MAX)='N,A,R,E,N,D,R,A'
DECLARE #ELIMINATE_CHAR CHAR (1)=','
DECLARE #L_START INT=1
DECLARE #L_END INT=(SELECT LEN (#INPUT))
DECLARE #OUTPUT CHAR (1)
WHILE #L_START <=#L_END
BEGIN
SET #OUTPUT=(SUBSTRING (#INPUT,#L_START,1))
IF #OUTPUT!=#ELIMINATE_CHAR
BEGIN
PRINT #OUTPUT
END
SET #L_START=#L_START+1
END
You may find the solution in SQL User Defined Function to Parse a Delimited String helpful (from The Code Project).
This is the code part from this page:
CREATE FUNCTION [fn_ParseText2Table]
(#p_SourceText VARCHAR(MAX)
,#p_Delimeter VARCHAR(100)=',' --default to comma delimited.
)
RETURNS #retTable
TABLE([Position] INT IDENTITY(1,1)
,[Int_Value] INT
,[Num_Value] NUMERIC(18,3)
,[Txt_Value] VARCHAR(MAX)
,[Date_value] DATETIME
)
AS
/*
********************************************************************************
Purpose: Parse values from a delimited string
& return the result as an indexed table
Copyright 1996, 1997, 2000, 2003 Clayton Groom (Clayton_Groom#hotmail.com)
Posted to the public domain Aug, 2004
2003-06-17 Rewritten as SQL 2000 function.
Reworked to allow for delimiters > 1 character in length
and to convert Text values to numbers
2016-04-05 Added logic for date values based on "new" ISDATE() function, Updated to use XML approach, which is more efficient.
********************************************************************************
*/
BEGIN
DECLARE #w_xml xml;
SET #w_xml = N'<root><i>' + replace(#p_SourceText, #p_Delimeter,'</i><i>') + '</i></root>';
INSERT INTO #retTable
([Int_Value]
, [Num_Value]
, [Txt_Value]
, [Date_value]
)
SELECT CASE
WHEN ISNUMERIC([i].value('.', 'VARCHAR(MAX)')) = 1
THEN CAST(CAST([i].value('.', 'VARCHAR(MAX)') AS NUMERIC) AS INT)
END AS [Int_Value]
, CASE
WHEN ISNUMERIC([i].value('.', 'VARCHAR(MAX)')) = 1
THEN CAST([i].value('.', 'VARCHAR(MAX)') AS NUMERIC(18, 3))
END AS [Num_Value]
, [i].value('.', 'VARCHAR(MAX)') AS [txt_Value]
, CASE
WHEN ISDATE([i].value('.', 'VARCHAR(MAX)')) = 1
THEN CAST([i].value('.', 'VARCHAR(MAX)') AS DATETIME)
END AS [Num_Value]
FROM #w_xml.nodes('//root/i') AS [Items]([i]);
RETURN;
END;
GO
ALTER function get_occurance_index(#delimiter varchar(1),#occurence int,#String varchar(100))
returns int
AS Begin
--Declare #delimiter varchar(1)=',',#occurence int=2,#String varchar(100)='a,b,c'
Declare #result int
;with T as (
select 1 Rno,0 as row, charindex(#delimiter, #String) pos,#String st
union all
select Rno+1,pos + 1, charindex(#delimiter, #String, pos + 1), #String
from T
where pos > 0
)
select #result=pos
from T
where pos > 0 and rno = #occurence
return isnull(#result,0)
ENd
declare #data as table (data varchar(100))
insert into #data values('1,2,3')
insert into #data values('aaa,bbbbb,cccc')
select top 3 Substring (data,0,dbo.get_occurance_index( ',',1,data)) ,--First Record always starts with 0
Substring (data,dbo.get_occurance_index( ',',1,data)+1,dbo.get_occurance_index( ',',2,data)-dbo.get_occurance_index( ',',1,data)-1) ,
Substring (data,dbo.get_occurance_index( ',',2,data)+1,len(data)) , -- Last record cant be more than len of actual data
data
From #data
I found that using PARSENAME as above caused any name with a period to get nulled.
So if there was an initial or a title in the name followed by a dot they return NULL.
I found this worked for me:
SELECT
REPLACE(SUBSTRING(FullName, 1,CHARINDEX(',', FullName)), ',','') as Name,
REPLACE(SUBSTRING(FullName, CHARINDEX(',', FullName), LEN(FullName)), ',', '') as Surname
FROM Table1
it is so easy, you can take it by below query:
DECLARE #str NVARCHAR(MAX)='ControlID_05436b78-04ba-9667-fa01-9ff8c1b7c235,3'
SELECT LEFT(#str, CHARINDEX(',',#str)-1),RIGHT(#str,LEN(#str)-(CHARINDEX(',',#str)))
select distinct modelFileId,F4.*
from contract
cross apply (select XmlList=convert(xml, '<x>'+replace(modelFileId,';','</x><x>')+'</x>').query('.')) F2
cross apply (select mfid1=XmlNode.value('/x[1]','varchar(512)')
,mfid2=XmlNode.value('/x[2]','varchar(512)')
,mfid3=XmlNode.value('/x[3]','varchar(512)')
,mfid4=XmlNode.value('/x[4]','varchar(512)') from XmlList.nodes('x') F3(XmlNode)) F4
where modelFileId like '%;%'
order by modelFileId
Select distinct PROJ_UID,PROJ_NAME,RES_UID from E2E_ProjectWiseTimesheetActuals
where CHARINDEX(','+cast(PROJ_UID as varchar(8000))+',', #params) > 0 and CHARINDEX(','+cast(RES_UID as varchar(8000))+',', #res) > 0
I re-wrote an answer above and made it better:
CREATE FUNCTION [dbo].[CSVParser]
(
#s VARCHAR(255),
#idx NUMERIC
)
RETURNS VARCHAR(12)
BEGIN
DECLARE #comma int
SET #comma = CHARINDEX(',', #s)
WHILE 1=1
BEGIN
IF #comma=0
IF #idx=1
RETURN #s
ELSE
RETURN ''
IF #idx=1
BEGIN
DECLARE #word VARCHAR(12)
SET #word=LEFT(#s, #comma - 1)
RETURN #word
END
SET #s = RIGHT(#s,LEN(#s)-#comma)
SET #comma = CHARINDEX(',', #s)
SET #idx = #idx - 1
END
RETURN 'not used'
END
Example usage:
SELECT dbo.CSVParser(COLUMN, 1),
dbo.CSVParser(COLUMN, 2),
dbo.CSVParser(COLUMN, 3)
FROM TABLE
question is simple, but problem is hot :)
So I create some wrapper for string_split() which pivot result in more generic way. It's table function which returns values (nn, value1, value2, ... , value50) - enough for most CSV lines. If there are more values, they will wrap to next line - nn indicate line number. Set third parameter #columnCnt = [yourNumber] to wrap at specific position:
alter FUNCTION fn_Split50
(
#str varchar(max),
#delim char(1),
#columnCnt int = 50
)
RETURNS TABLE
AS
RETURN
(
SELECT *
FROM (SELECT
nn = (nn - 1) / #columnCnt + 1,
nnn = 'value' + cast(((nn - 1) % #columnCnt) + 1 as varchar(10)),
value
FROM (SELECT
nn = ROW_NUMBER() over (order by (select null)),
value
FROM string_split(#str, #delim) aa
) aa
where nn > 0
) bb
PIVOT
(
max(value)
FOR nnn IN (
value1, value2, value3, value4, value5, value6, value7, value8, value9, value10,
value11, value12, value13, value14, value15, value16, value17, value18, value19, value20,
value21, value22, value23, value24, value25, value26, value27, value28, value29, value30,
value31, value32, value33, value34, value35, value36, value37, value38, value39, value40,
value41, value42, value43, value44, value45, value46, value47, value48, value49, value50
)
) AS PivotTable
)
Example of using:
select * from dbo.fn_split50('zz1,aa2,ss3,dd4,ff5', ',', DEFAULT)
select * from dbo.fn_split50('zz1,aa2,ss3,dd4,ff5,gg6,hh7,jj8,ww9,qq10', ',', 3)
select * from dbo.fn_split50('zz1,11,aa2,22,ss3,33,dd4,44,ff5,55,gg6,66,hh7,77,jj8,88,ww9,99,qq10,1010', ',',2)
Hope, it will helps :)

SQL Server split a single column multiple times

I have a database table that has a column with stacked data with two levels with a column that I want to break a part. Here is the example of the data (data changed to protect the innocent :) :
Table
ID = varchar(100)
CarData = varchar(1000)
ID CarData
1 Nissan:blue:20000,Ford:green:10000
2 Nissan:steel:20001,Ford:blue:10001,Chevy:blue:10000,Ford:olive:10000
** Note that cardata can is not fixed, and can have many cars in it
Output Desired:
ID Manufacture Color Cost
1 Nissan Blue 20000
1 Ford green 10000
2 Nissan steel 20001
... and on
So to say it plainly I need to break the first stacked field which is a comma and create a row for that, then break the second stacked field which is a colon into columns.
Any help would be greatly appreciated.
-- Sample data
declare #T table(ID int, CarData varchar(100))
insert into #T values
(1, 'Nissan:blue:20000,Ford:green:10000'),
(2, 'Nissan:steel:20001,Ford:blue:10001,Chevy:blue:10000,Ford:olive:10000')
-- Recursice CTE to get one row for each car
;with cte(ID, Car, CarData) as
(
select ID,
cast(substring(CarData+',', 1, charindex(',', CarData+',')-1) as varchar(100)),
stuff(CarData, 1, charindex(',', CarData), '')+','
from #T
where len(CarData) > 0
union all
select ID,
cast(substring(CarData, 1, charindex(',', CarData)-1) as varchar(100)),
stuff(CarData, 1, charindex(',', CarData), '')
from cte
where len(CarData) > 0
)
-- Use parsename to split the car data
select ID,
parsename(replace(Car, ':', '.'), 3) as Manufacture,
parsename(replace(Car, ':', '.'), 2) as Color,
parsename(replace(Car, ':', '.'), 1) as Cost
from cte
order by ID
Result:
ID Manufacture Color Cost
-- ----------- ------ -----
1 Nissan blue 20000
1 Ford green 10000
2 Nissan steel 20001
2 Ford blue 10001
2 Chevy blue 10000
2 Ford olive 10000
Edit 1
You will have trouble with parsename if color, cost or a manufacturer name contains a .. If that is the case you should try this instead.
-- Sample data
declare #T table(ID int, CarData varchar(100))
insert into #T values
(1, 'Nissan:blue:20000,Ford:green:10000'),
(2, 'Nissan:steel:20001,Ford:blue:10001,Chevy:blue:10000,Ford:olive:10000')
-- Recursice CTE to get one row for each car
;with cte(ID, Car, CarData) as
(
select ID,
cast(substring(CarData+',', 1, charindex(',', CarData+',')-1) as varchar(100)),
stuff(CarData, 1, charindex(',', CarData), '')+','
from #T
where len(CarData) > 0
union all
select ID,
cast(substring(CarData, 1, charindex(',', CarData)-1) as varchar(100)),
stuff(CarData, 1, charindex(',', CarData), '')
from cte
where len(CarData) > 0
)
-- Split the car data with substring
select ID,
substring(Car, 1, P1.Pos-1) as Manufacture,
substring(Car, P1.Pos+1, P2.Pos-P1.Pos-1) as Color,
substring(Car, P2.Pos+1, len(Car)-P2.Pos) as Cost
from cte
cross apply (select charindex(':', Car)) as P1(Pos)
cross apply (select charindex(':', Car, P1.Pos+1)) as P2(Pos)
order by ID
Use this string splitting function to produce a table of results.
I would first call dbo.split() using a , as the separator character. Then you'll have a list of items like:
Nissan:blue:20000
Ford:green:10000
Nissan:steel:20001
Ford:blue:10001
Chevy:blue:10000
Ford:olive:10000
From there you can call dbo.split() again using : as your separator. Each call will result in exactly three records (assuming your design as at least that "normal").
As #JNK mentioned in his comment, hopefully this is not something you'd want to be running regularly.
EDIT:
Some sample code to get you started:
SELECT *
INTO #YuckyCar
FROM (
SELECT 1 ID, 'Nissan:blue:20000,Ford:green:10000' CarData
UNION
SELECT 2, 'Nissan:steel:20001,Ford:blue:10001,Chevy:blue:10000,Ford:olive:10000'
) T;
-- Shows logical step #1
SELECT ID, X.items MoreCarData
FROM #YuckyCar CROSS APPLY dbo.Split(CarData, ',') X;
-- Shows logical step #2
SELECT Q.ID, Y.items
FROM (
SELECT ID, X.items MoreCarData
FROM #YuckyCar CROSS APPLY dbo.Split(CarData, ',') X) Q CROSS APPLY dbo.Split(Q.MoreCarData, ':') Y
DROP TABLE #YuckyCar;
The problem in the last part is that you can't guarantee row 1 = Manufacturer, row 2 = Color, row 3 = Cost.
This should solve your problem:
[EDIT] Your ID is a varchar(100) and you do not specify if it is a primary key, so I made some changes ... ID does't have to be primary key in this case.
declare #T table(ID varchar(100), CarData varchar(1000))
declare #OUT table(pk INT IDENTITY(1,1), ID varchar(100), Manufacture varchar(100), Color VARCHAR(100), Cost INT)
insert into #T (ID, CarData) values
('1', 'Nissan:blue:20000,Ford:green:10000'),
('2', 'Nissan:steel:20001,Ford:blue:10001,Chevy:blue:10000,Ford:olive:10000')
DECLARE #x XML, #i INT, #ID VARCHAR(100), #maxi INT;
;WITH list AS (SELECT pk = ROW_NUMBER() OVER(ORDER BY ID), * FROM #T)
SELECT #i=1, #maxi=MAX(pk) FROM list;
WHILE #i <= #maxi
BEGIN
;WITH list AS (SELECT pk = ROW_NUMBER() OVER(ORDER BY ID), * FROM #T)
SELECT
#x = CAST( '<root><car><prop>' +
REPLACE(
REPLACE(
CarData
,':'
,'</prop><prop>'
)
,','
,'</prop></car><car><prop>'
) +
'</prop></car></root>'
AS XML)
, #ID = ID
FROM list
WHERE pk = #i
INSERT INTO #OUT
SELECT
ID = #ID
,Manufacture = x.value('./prop[1]','VARCHAR(100)')
,Color = x.value('./prop[2]','VARCHAR(100)')
,Cost = x.value('./prop[3]','INT')
FROM #x.nodes('/root/car') AS T(x)
SET #i = #i + 1;
END
SELECT * FROM #OUT
/* -- OUTPUT
ID Manufacture Color Cost
--------------------------------
1 Nissan blue 20000
1 Ford green 10000
2 Nissan steel 20001
2 Ford blue 10001
2 Chevy blue 10000
2 Ford olive 10000
*/