I was looking for a solution to the problem on many internet forums, but I couldn't find it. The topic always ends with the sentence - that we will fix this problem with the next VS update. (Since 2017...). Even after updating VS nothing changes. When I try to share my project with Live share, my guest cannot access the project files and can't open them, he gets an error:
The Output Channel Recipient has limited functionality due to the lack of the dependency service: Microsoft.VisualStudio.Shell.OutputChannelStore (0.1).
C ++ Service has limited functionality due to the lack of a dependency service: Microsoft.VisualStudio.VC.ManagedPackageService.
I use visual studio 2022 community. Since April, there have been a lot of entries about this problem, but somehow there is no solution, anyone knows what's going on?
With current version of VS(which was downloaded on 16.12.2022) live share works correctly.
A large number of our clients operating a split front end/back end Microsoft Access application we built are encountering frequent but intermittent database file corruption issues. When the back end file is opened this message appears: "Microsoft Access has detected that this database is in an inconsistent state, and will attempt to recover the database … "
Opening the database with DAO using Visual Basic code results in error code 3343, "Unrecognized database format."
The repair attempt succeeds and we have not witnessed any data loss or dropping of primary keys, indexes, or relationships. Most cases involve where the back end file is located on a shared network drive. Some searches suggest that the latest Windows 10 update 1803 is suspect. Has anybody else encountered this?
It has recently been reported several times. A very thorough coverage of this issue can be found here.
Strangely, the cure can - at least for some cases - be found in old support threads:
Moved to Server 2012 getting Access Database Corruption
Cannot access shared files or folders on a drive in Windows Server 2012 or Windows Server 2012 R2
Comments:
It’s a bit strange though as the patch to fix the issue is back in May
2014 which is already installed on the server.
I can only think that
something in the latest Windows 10 Build 1803 has brought up the issue
again as it was PC’s that are running that build were causing the
problem.
The fix is adding the following entry into Vospers Server
2012 R2 registry:
Key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters
Value: DisableLeasing
Type: DWORD
Data: 0x1
We testing this on our server and the problem went away. As soon as we
changed the ‘Disable leasing’ value to ‘0’ again, the problem
returned.
I can’t find a reasonable explanation yet as to why this
has started to happen last week but if it works and doesn’t cause any
further issues elsewhere then I’m ok with that.
Also note that homegroups have been removed from Win10 1803. This may affect rights on shared folders.
I am processing SSAS Cube programmatically in .net script - server.ExecuteCaptureLog(true, true). It used to work perfectly. Suddenly now a days it started giving error saying
The operation has been cancelled because there is not enough memory available for the application. If using a 32-bit version of the product, consider upgrading to the 64-bit version or increasing the amount of memory available on the machine.
When we re-run it gives same error with couple of other errors.
Cursor not found
and
An error occurred while processing the partition 'partition1_0d0bbd49-7f8c-45c8-91ae-4y66a18b8cc22' in table 'partition1_0d0bbd49-7f8c-45c8-91ae-4y66a18b8cc22'".
Please help. Thanks in advance.
Ranjith
Some background: I've been encountering this memory exception within SSMS 2012 since it was released coupled with Red Gate's SQLPrompt (this exception never happens in my SSMS 2008R2 on the same laptop).
I was originally encountering these exceptions daily (SSMS2012 and SQLPrompt) which forces me to close and reopen SSMS (along with everything I was working on). Months ago I stumbled upon a support thread that pointed possible add-on's as being the cause so I uninstalled my only add-on (SQL Prompt, but did not uninstall the rest of the developer's bundle) and went many months without a single exception much less the System.OutOfMemoryException exception.
Once SP1 was released for 2012 I applied it and reinstalled SQL Prompt again (the latest version) to see if maybe the issue had been addressed and within 7 hours of development time I was greeted again with the infamous System.OutOfMemoryException.
Through out all of this I've been opening tickets with Red Gate and submitting debug logs where they see the exception but since the memory exception doesn't explicitly list SQLPrompt they won't escalate the issue to the development team. Prior to this specific exception SQL Prompt however is throwing numerous exceptions (some listed below) within the SSMS 2012 IDE (Visual Studio 2010). I believe that the memory exception is symptomatic of an issue with how SQL Prompt manages cached data and eats up the available memory for SSMS which eventually throws an exception as a result.
I've learn how to defer this issue and how to reproduce it and it is directly related to two variables:
Connecting and working on multiple instances in SSMS (Object Explorer and Query windows). I.e. Connected to 7 instances netted the exception within 2-3 hours.
Returning result sets from multiple instances. This includes queries used by SSMS to return information to the IDE and results returned to the individual query windows.
The more instances I'm connected to the fast the exception is raised which leads me SQL Prompt's caching all of the object information per instances. Once the memory exception is raised the situation degrades until SSMS crashes completely (unless I close it first).
What I am after is how to collect more/better information to submit to Red Gate to correct this issue. This is where I need your help.
Laptop: HP Elite book 8440
RAM: 6GB
Current OS:
Win 7 Enterprise Ed Sp1
Here are some of exceptions caused by SQL Prompt:
System.ArgumentOutOfRangeException "Specified argument was out of the range of valid values."
Microsoft.VisualStudio.Text.Implementation.BinaryStringRebuilder.GetLineNumberFromPosition(N/A,N/A)
Microsoft.VisualStudio.Text.Implementation.TextSnapshot.GetLineFromPosition(Microsoft.VisualStudio.Text.Implementation.TextSnapshot,N/A)
Microsoft.VisualStudio.Editor.Implementation.VsTextBufferAdapter.GetLineIndexOfPosition(N/A,System.Int32,System.Int32&,System.Int32&)
RedGate.SQLPrompt.CommonVS.Editor.VSScriptProvider.PositionFromIndex(RedGate.SQLPrompt.CommonVS.Editor.VSScriptProvider,System.Int32)
RedGate.SqlPrompt.Metadata.Script.ScriptProviderBase.GetText(RedGate.SQLPrompt.CommonVS.Editor.VSScriptProvider,System.Int32,System.Int32)
RedGate.SqlPrompt.Engine.NewEngine.SqlPromptEngine.GetCandidates(RedGate.SqlPrompt.Engine.NewEngine.SqlPromptEngine,System.Int32)
RedGate.SqlPrompt.Engine.PromptEngineEmulator.get_GetSuggestions(RedGate.SqlPrompt.Engine.PromptEngineEmulator)
RedGate.SqlPrompt.Engine.AutoCompleter.m_FilterChanged(RedGate.SqlPrompt.Engine.AutoCompleter,RedGate.SqlPrompt.Engine.PromptEngineEmulator,System.EventArgs)
RedGate.SqlPrompt.Engine.PromptEngineEmulator.OnFilterChanged(RedGate.SqlPrompt.Engine.PromptEngineEmulator)
RedGate.SqlPrompt.Engine.PromptEngineEmulator.set_Index(RedGate.SqlPrompt.Engine.PromptEngineEmulator,System.Int32)
RedGate.SqlPrompt.Engine.PromptEngineEmulator.set_CaretPosition(RedGate.SqlPrompt.Engine.PromptEngineEmulator,N/A)
RedGate.SQLPrompt.CommonUI.Editor.EditorWindowBase.SetEngineCaretPosition(RedGate.SQLPrompt.SSMSUI.SSMSEditorWindow,N/A)
RedGate.SQLPrompt.CommonUI.Editor.EditorWindowBase.UpdateUIPrompts(RedGate.SQLPrompt.SSMSUI.SSMSEditorWindow)
RedGate.SQLPrompt.CommonVS.Editor.VSEditorWindow.OnTextViewCommandExec(RedGate.SQLPrompt.SSMSUI.SSMSEditorWindow,RedGate.SQLPrompt.CommonVS.Editor.TextViewMonitor,RedGate.SQLPrompt.CommonVS.Editor.CommandExecEventArgs)
RedGate.SQLPrompt.CommonVS.Editor.TextViewMonitor.AfterCommandExecute(RedGate.SQLPrompt.CommonVS.Editor.TextViewMonitor,RedGate.SQLPrompt.CommonVS.Editor.CommandExecEventArgs)
RedGate.SQLPrompt.CommonVS.Editor.TextViewMonitor..(RedGate.SQLPrompt.CommonVS.Editor.TextViewMonitor.)
RedGate.SQLPrompt.CommonUI.Utils.ErrorDialog.Do(System.Action)
RedGate.SQLPrompt.CommonVS.Editor.TextViewMonitor.(RedGate.SQLPrompt.CommonVS.Editor.TextViewMonitor,System.Guid&,System.Uint32,System.Uint32,System.IntPtr,System.IntPtr)
RedGate.SQLPrompt.CommonVS.Editor.TextViewMonitor..(RedGate.SQLPrompt.CommonVS.Editor.TextViewMonitor.,System.Guid&,System.Uint32,System.Uint32,System.IntPtr,System.IntPtr)
Microsoft.VisualStudio.Editor.Implementation.CommandChainNode.Exec(N/A,N/A,N/A,N/A,N/A,N/A)
System.ArgumentException 00:05:14.7510000 "The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))"
#mMc.#JQub.#OQub(#mMc.#JQub,N/A,System.Uint32,#mMc.#k3ub&)
#mMc.#JQub.#z26.#8Di(#mMc.#JQub.#z26)
RedGate.SQLSourceControl.Engine.SmartAssembly.ExceptionReporting.ErrorReporterBase.Do(RedGate.SQLSourceControl.CommonUI.Forms.ErrorDialog,System.Action,System.Predicate`1<System.Exception>,System.Boolean)
RedGate.SQLSourceControl.Engine.SmartAssembly.ExceptionReporting.ErrorReporterBase.Do(RedGate.SQLSourceControl.CommonUI.Forms.ErrorDialog,System.Action)
RedGate.SQLSourceControl.CommonUI.Forms.ErrorDialog.Do(System.Action)
And here is the Memory Exception:
System.OutOfMemoryException <null>
System.Text.StringBuilder.set_Capacity(System.Text.StringBuilder,N/A)
Microsoft.SqlServer.Management.QueryExecution.QEDiskStorageView.set_MaxNumBytesToDisplay(N/A,N/A)
Microsoft.SqlServer.Management.QueryExecution.QEDiskDataStorage.GetStorageView(N/A)
Microsoft.SqlServer.Management.QueryExecution.QEResultSet.StartRetrievingData(Microsoft.SqlServer.Management.QueryExecution.QEResultSet,System.Int32,N/A)
Microsoft.SqlServer.Management.QueryExecution.ResultSetAndGridContainer.StartRetrievingData(N/A,N/A,N/A)
Microsoft.SqlServer.Management.QueryExecution.ResultsToGridBatchConsumer.OnNewResultSet(Microsoft.SqlServer.Management.QueryExecution.ResultsToGridBatchConsumer,N/A,N/A)
Microsoft.SqlServer.Management.QueryExecution.QESQLBatch.ProcessResultSet(Microsoft.SqlServer.Management.QueryExecution.QESQLBatch,N/A)
Microsoft.SqlServer.Management.QueryExecution.QESQLBatch.DoBatchExecution(Microsoft.SqlServer.Management.QueryExecution.QESQLBatch,System.Data.SqlClient.SqlConnection,N/A)
Microsoft.SqlServer.Management.QueryExecution.QESQLBatch.Execute(N/A,N/A,N/A)
Microsoft.SqlServer.Management.QueryExecution.QEOLESQLExec.DoBatchExecution(Microsoft.SqlServer.Management.QueryExecution.QEOLESQLExec,Microsoft.SqlServer.Management.QueryExecution.QESQLBatch)
Microsoft.SqlServer.Management.QueryExecution.QESQLExec.ExecuteBatchCommon(Microsoft.SqlServer.Management.QueryExecution.QEOLESQLExec,N/A,N/A,System.Boolean&)
Microsoft.SqlServer.Management.QueryExecution.QEOLESQLExec.ExecuteBatchHelper(N/A,N/A,N/A,N/A)
Microsoft.SqlServer.Management.QueryExecution.QEOLESQLExec.ProcessBatch(N/A,N/A,N/A)
.BatchParser.ThunkCommandExecuter.ProcessBatch(N/A,N/A,N/A)
Again, to be clear, I don't know if the other exceptions are related or not but the memory exception only happens with SQL Prompt installed.
Thanks for your assistance!
At this point RedGate has finally admitted the issue is that the SQL Prompt plug-in is working in-process with the 32-bit SSMS client and eventually chokes the memory resulting in the out-of-memory exception.
Their response to a fix for this would be "maybe" in a year or so which, when you are paying for annual support, is a slap in the face. I've since refused to pay for further support for 2 existing Tool-belt licenses over this issue, an issue that I have fought with since 2012, until they correct this. If this is affecting you then, and if you can, do the same and vote with your wallet to motivate them to make this fix a higher priority.
If and when that day comes I will update this answer post with the version information of the corrected build of SQL Prompt that no longer operates within the 32-bit memory space of SSMS.exe.
What works for me is Disabling Code suggestions in SQL prompt, then I can run the same query and then get the results.
I can then Enable Code suggestions in SQL prompt and the error stays away for a while.
Can you try limiting the number of columns as described in this post and see if it helps?
http://redgate.uservoice.com/forums/94413-sql-prompt-feature-suggestions/suggestions/1364757-disable-sql-prompt-on-certain-databases
I have a problem with the Analysis cube - it keeps growing. I have managed to pinpoint it to a single dimension, the Version Control File dimension (id = file), which keeps growing. The problem’s symptoms are that with (almost) every rebuild, the old files (the .fact.map and the .fact.map.hdr files) do not get deleted. Over time this accumulates, and I’m reaching the point where the database reaches an unreasonable size of 146 GB, where the file dimension accounts for 145 GB of it!
My guess is that some error occurs, almost every rebuild which causes the operation to stop before it gets to its cleanup phase.
I know how to fix the symptoms, by deleting and manually recreating the analysis cube, but I need to understand why this happens and how to fix it once and for all.
Does anybody know how to explain / fix the problem?
What version of SQL Server do you have installed? I believe this may have been fixed in the latest CU for 2008 R2.
http://support.microsoft.com/kb/979778