I need to create a permanent identifying URL for each user, through which (by visiting it), they will be logged in.
For example:
User1: https://www.example.com/?userToken=gj56u45g64g56uy54g6uyg546
User2: https://www.example.com/?userToken=8o9k7ok9o89k7o9ko8k9o78k9
The functionality is similar how one would identify to an API, or click an email confirmation link, but it has to be permanent or at least with a very long duration, because it will be stored on an NFC chip.
How can I do this within Auth0? (or Oauth 2, because I think that's what they use?)
From some reading that I did, I did not seem to find a way to get a permanent token for a user, and those tokens that I could get, had a maximum life cycle of 24 hours, which is too short for the intended use.
I have done this fairly quickly in a custom way, but within Auth0 I am not sure how it's done.
I read about refresh tokens, but these it seems to me, will need to be written to the NFC chip every time, which I can't do.
When you authenticate, you are given an ID and access token.
You typically use the ID-token to create a long-lived session-cookie, that can live as long as you like. The ID-token is by design a pretty short-lived token, by default like 5 minutes in some systems.
If it is for an embedded system, then there also the device-flow, that is more suitable for devices with a limited UI https://auth0.com/device-flow
I doubt writing JWT tokens from an authorization service is the right approach, as you have to remember that these services typically change/rotate their signing keys, so tokens issued for 6 months ago, might not be accepted today. And for example in a compromise and they are forced to change all their signing-keys, then all your devices will be made useless.
Better approach is to write your own "key" into each device.
Related
I have a set of APIs purely for my own app, so I just have a simple API to create access token, when user provided the email and password
/api/access_token (return access_token when email and password matched)
The access_token was saved and matched against in the database sessions table with the expiry field, for now, the expiry is one week, so user need to re-login after one week.
So far it worked fine, but if I want to have the remember me functions as those Facebook / Twitter app, which mean user don't need to re-login so often, which I assume they are using something like the OAuth refresh access tokens approach.
Since I am not using those OAuth stuffs, given my current design and setup, what would be the simplest and secure way to achieve the same functionalities?
You have a few options to choose from, I'll try provide an overview. There is a significant difference depending on whether the client is a browser or a mobile app.
First, for browsers, plain old session tokens are generally more secure than JWT or other structured tokens. If your requirements don't force you to store stuff on or flow stuff through the client, then don't.
The most secure option for a browser client (single page javascript app or plain old rendered app) is the following:
When the user hits the login endpoint with their username and password, the endpoint creates a random session id, and stores it in a database.
The server sends back the session token as a httpOnly cookie, thus it protects it from potential XSS.
The client then automatically includes the session token in all subsequent requests.
Additional data can be stored server-side for the session.
This above is basically plain old stateful session management. The length of such a session should be limited, but if your requirements and threat model allows, you can make this a very long session, like months even if you want, but be aware of the associated risk. These tokens can be inspected in the browser and stolen from a user if not else then by physical access to the client, so a very long expiry has its risks.
Note that mobile apps can pretty much just do the same. The difference is that mobile apps do have a way to store secrets more securely on current mobile platforms. As the storage is protected by user login, and also segregated by app, a session id stored correctly in a mobile app has a lot less chance to be compromised, meaning a longer expiry presents lower risk than in case of a plain browser.
You can also implement a refresh token. However, the point in refresh tokens is that you want to store them in a different way than the other token. If they are stored the same way, a refresh token provides very little benefit (sure, it won't be sent with every request, but that's not where it will get compromised anyway, TLS / HTTPS is secure for transport). In case of OAuth / OpenID, the authentication server can for example set the refresh token on its own origin (like login.example.com), and then forward the user to the app with an authorization code for example, which can be exchanged by the application (service provider) for an access token, that is set for the application domain (like app.example.com). This way, the two tokens have different access models, a compromised app will not leak the refresh token, even if the current access token is leaked, and the access token can be refreshed relatively seamlessly.
If you don't have a separate login endpoint, all this doesn't make a lot of sense, except in one very specific case. Thinking about browser clients, you can set a refresh token in a httpOnly cookie, so it's protected from XSS, and you can store an access token in something like localStorage. However, why would you do this? Pretty much the only reason you would do this is if you need to send the access token to some other origin, which is the whole point in OAuth and OpenID.
You could also argue that statelessness is a benefit of such tokens. In reality, the vast majority of services don't actually benefit from statelessness, but it makes some features technically impossible (like for example forcing logout, as in terminating existing user sessions - for that, you would have to store and check revoked tokens, which is not stateless at all).
Ok so to provide "remember me" as in auto-login, you basically have two options. You can either just make your sessions very long (like months, years, forever), which is more ok for mobile apps as they can store the token more securely than a browser, or you can implement some kind of a refresh mechanism. As discussed above, this only makes sense if the refresh token is stored and accessed differently than the session token.
In case of a browser app with a single origin (no auth/login service), this is not really possible, there is no real separation, and a refresh token doesn't make a lot of sense. If you want an auth service, you should be looking into OpenID Connect (OIDC).
For a mobile app, what you could do is store a refresh token in secure storage, and use access tokens from the localStorage of something like a webview, but unless there are very specific requirements, this would likely not be worth the complexity, as you could just store a longer lived session token in the secure storage.
As for remember me, you can just implement it in a way that users that choose to be remembered will have a sessino token with a longer expiry - as you already store expiry for each token in your database, everything is already set up for that, and in many usecases this is fine. There is some additional risk for users that choose this, but there is also some additional benefit in terms of convenience - it's always a compromise.
What you can consider doing to make such very long sessions more secure is check and store some kind of a device fingerprint (there are Javascript libs for this). If you have a very long lived session, but only valid for a specific fingerprint (ie. it only works from the same device), that mitigates the risk somewhat. However, almost everything that is used for a device fingerprint can be spoofed by an attacker, but it still makes it significantly harder for an attacker to steal a session, and you can have approrpiate monitoring in place for attempts. There will be UX considerations too, like the fingerprint might change with browser/app updates and so on, but it's still worth it sometimes.
Another new-ish feature you could consider is WebAuthn and Passkey, for passwordless authentication. These basically provide device authentication, a key will be seamlessly generated for the user on the specific device, and that will be used for logging in. UX is now getting better, but there are still challenges. The way device authentication translates into user authentication is that the key is associated with the user session (the user "unlocks" the keystore, ie. decrypts the stored keys upon login, with their login credentials). This can also provide "remember me" (seamless auto-login), but in my experience the technology is not fully ready yet, though it's getting there.
While I fully agree with the comments above, I would like to create a clear solution in the minds of other readers by giving a clear and directly understandable concrete answer to your problem.
Let's take an example for JWT;
RefreshToken is the structure that will be activated when the AccessToken expires and will complete the Authentication phase without the need for login. The logic is as follows: AccessToken has a very short lifespan compared to RefreshToken. This time is up to you. The purpose is this: AccessToken is destroyed in short time intervals so that it does not fall into the hands of anyone. However, for this reason, the need to login to the system again arises. To make it easier to login again; When you take the previous AccessToken, you will take another token (RefreshToken) that can be used for a longer period of time and keep it in your pocket. The part I call your pocket depends on the technology you use. For example, you can also keep it in the browser. Keeping it in a browser is not an ideal method (It would be DB, file, cache what you use), because it can create a security vulnerability when someone has access for browsers. So where to keep it depends on the situation and you decide, but; RefreshToken will be activated when AccessToken expires on your client Login functionality.
It has become customary to set a default period of 100 days for RefreshToken. however, this time is up to you, depending on your application business preference.
I found a very clear example when I googled, you can check it below.
https://www.c-sharpcorner.com/article/jwt-authentication-with-refresh-tokens-in-net-6-0/
You can use the same functionality on your serverside code for all your clients (mobile or web not important)
So I've been looking at creating a a website. How exactly has not been decided, but lets say I'm going to use a React.js single page application (SPA) that interacts with a REST API.
This is fine and all, but at some point I am going to have to log users into this site. In looking into this problem, I have learnt about OAuth's implicit (or authorization code without a secret) grant, which is what they claim should be used when dealing with authorization in SPAs. The reasoning behind this is that there is no way for them to securely store a client secret, and thus they should only be given access to relatively short lived access codes. This being true for client-side authentication and authorization in general.
The problem, of course, is that every time your access token expires you need your user to re-authorize, as you now have no way of refreshing this access token.
Despite this, websites like Google, Facebook and Github (among many others) seem to keep me permanently logged into their systems. Surely this means they are storing some sort of session ID permanently within the browser and thus this suffers the exact same problems as to why you shouldn't use client secrets in OAuth?
So how do they deal with this? Are they just, effectively, using very long lived access codes or session IDs and say "screw security"? I mean, Google force me to use short-lived access codes if I want to make an application that requests their data, so why do their own apps and website not suffer from this?
I have an account that I do referrals on and instead of having to make an entire landing page, and provide users with my referral link - I'll just have them purchase from my account.
Is there any way I could generate a link that will automatically log users in without me having to reveal my password?
You could definitely do this by using something like a JSON Web Token (JWT).
Basically, the way it works is like this:
On your server, you create a JWT that is signed with a secret key (some random string that only your server knows).
In your JWT, you include your user's account ID that you want the purchase to come from.
You email this JWT to the person in a link, something like https://mywebsite.com/order?token=<jwt-token-here>.
The user clicks that link.
Your web server takes the token out of the URL parameters, and ensures it is valid (that the signature is good).
Your web server then finds the account ID in the token, and retrieves that user account from your user database.
You then LOG that user in using cookies or whatever, and direct them to the purchase page fully logged in!
This is a pretty typical web flow for what you're trying to do, and is a totally fine way to do things like this. There are tons of JWT libraries out there that make this easy to do, so it shouldn't be very technically challenging.
The only other thing you should know in regards to creating JWTs, is that you can set an 'expiration' time. You should DEFINITELY do this, as you don't want someone to be able to log in using your token months in the future. The best way to do it would to likely be generate a token that lasts for 24 hours or so, then email THAT to the user. This way, it expires after one day.
Last thing to know: there are actually quite a few auth libraries that simplify this stuff. I'm the author of one, myself: express-stormpath. Depending on what you're trying to do, that might actually make your life wayyy easier as it can generate those tokens automatically, and handle session creations for ya.
Hope that helps!
I'm creating an app where user submissions (e.g. photo) are designed to be captured via crowdsourcing. The app connects to an API using an API key, and the app then submits the data anonymously.
We want to avoid the overhead of people creating user accounts and passwords.
However, it seems to me this is vulnerable to a the problem of the key getting revealed. The result is that spammy submissions could be made much more quickly via browser/wget HTTP requests. Because the app is installed on people's devices, it would take a long time for us to be able to withdraw a key and replace it with another.
The approaches to deal with this problem I can think of are:
Hope that the key stays secret. Not ideal from a risk perspective. Using HTTPS for the API endpoint would reduce this risk, but presumably the app could still be decompiled to reveal it (not that in practice anyone would really bother)
Store a fixed username and password in the app, and submit as that. That basically seems to run the same problem - if the credentials are leaked then this has the same problem as 1.
Require a first-run fetch of a token to auto-create a username and password. However, if the key is compromised then this is no more secure. Also, this means we end up with lots of junky usernames and passwords in our database that really don't mean anything.
Not considered desirable: force users to create a username/password. However, that then means a lot of messing around with accounts, and compromises the anonymity of submissions, meaning data protection implications.
Are there standard patterns dealing with this scenario?
The first time the app runs, it could get a random token from the server, store this, and use it on all subsequent requests. The server just checks that the token is one it produced itself. After each request, block the token for 5 minutes (or make a counter so 10 requests are ok but the 11th gets blocked, depending on your use case). When a token gets misused, block it, so the user will have to deinstall/reinstall your app, or, if he made a script to emulate the app, he'd have to re-register after every few posts (plus you can limit the numer of registrations per IP or something similar).
You can assume any fixed credentials will be compromised. A good attacker can and will reverse-engineer the client. On the flip-side, a username/password combo will compromise anonymity (and nothing is stopping a spammer from creating an account).
Honestly, this is a very difficult problem. The (inelegant) solution involves something like a captcha where you provide a problem that is difficult for a bot but easy for a human to solve (for the record, I think captchas are almost useless, although there have been some less annoying alternatives).
Alternatively, sites like Facebook use sophisticated algorithms to detect spam. (This is a difficult approach so I would not recommend it unless you have the manpower to dedicate to it).
Overview
I'm looking to create a (REST) API for my application. The initial/primary purpose will be for consumption by mobile apps (iPhone, Android, Symbian, etc). I've been looking into different mechanisms for authentication and authorization for web-based APIs (by studying other implementations). I've got my head wrapped around most of the fundamental concepts but am still looking for guidance in a few areas. The last thing I want to do is reinvent the wheel, but I'm not finding any standard solutions that fits my criteria (however my criteria my be misguided so feel free to critique that as well). Additionally, I want the API to be the same for all platforms/applications consuming it.
oAuth
I'll go ahead and throw out my objection to oAuth since I know that will likely be the first solution offered. For mobile applications (or more specifically non-web applications), it just seems wrong to leave the application (to go to a web-browser) for the authentication. Additionally, there is no way (I am aware of) for the browser to return the callback to the application (especially cross-platform). I know a couple of apps that do that, but it just feels wrong and gives a break in the application UX.
Requirements
User enters username/password into application.
Every API call is identified by the calling application.
Overhead is kept to a minimum and the auth aspect is intuitive for developers.
The mechanism is secure for both the end user (their login credentials are not exposed) as well as the developer (their application credentials are not exposed).
If possible, not require https (by no means a hard requirement).
My Current Thoughts on Implementation
An external developer will request an API account. They will receive an apikey and apisecret. Every request will require at minimum three parameters.
apikey - given to developer at regisration
timestamp - doubles as a unique identifier for each message for a given apikey
hash - a hash of the timestamp + the apisecret
The apikey is required to identify the application issuing the request. The timestamp acts similarly to the oauth_nonce and avoids/mitigates replay attacks. The hash ensures that request was actually issued from the owner of the given apikey.
For authenticated requests (ones done on the behalf of a user), I'm still undecided between going with an access_token route or a username and password hash combo. Either way, at some point a username/password combo will be required. So when it does, a hash of several pieces of information (apikey, apisecret, timestamp) + the password would be used. I'd love feedback on this aspect. FYI, they would have to hash the password first, since I don't store the passwords in my system without hashing.
Conclusion
FYI, this isn't a request for how to build/structure the API in general only how to handle the authentication and authorization from solely within an application.
Random Thoughts/Bonus Questions
For APIs that only require an apikey as part of the request, how do you prevent someone other than the apikey owner from being able to see the apikey (since sent in the clear) and make excessive requests to push them over usage limits? Maybe I'm just over thinking this, but shouldn't there be something to authenticate that a request was verified to the apikey owner? In my case, that was the purpose of the apisecret, it is never shown/transmitted without being hashed.
Speaking of hashes, what about md5 vs hmac-sha1? Does it really matter when all of the values are hashed with with sufficiently long data (ie. apisecret)?
I had been previously considering adding a per user/row salt to my users password hash. If I were to do that, how could the application be able to create a matching hash without knowing the salt used?
The way I'm thinking about doing the login part of this in my projects is:
before login the user requests a login_token from the server. These are generated and stored on the server on request, and probably have a limited lifetime.
to login the application calculates the hash of the users password, then hashes the password with the login_token to get a value, they then return both the login_token and the combined hash.
The server checks the login_token is one that it has generated, removing it from its list of valid login_tokens. The server then combines its stored hash of the user's password with the login_token and ensures that it matches the submitted combined token. If it matches you have authenticated your user.
Advantages of this are that you never store the user's password on the server, the password is never passed in the clear, the password hash is only passed in the clear on account creation (though there may be ways around this), and it should be safe from replay attacks as the login_token is removed from the DB on use.
That's a whole lot of questions in one, I guess quite a few people didn't manage to read all the way to the end :)
My experience of web service authentication is that people usually overengineer it, and the problems are only the same as you would encounter on a web page. Possible very simple options would include https for the login step, return a token, require it to be included with future requests. You could also use http basic authentication, and just pass stuff in the header. For added security, rotate/expire the tokens frequently, check the requests are coming from the same IP block (this could get messy though as mobile users move between cells), combine with API key or similar. Alternatively, do the "request key" step of oauth (someone suggested this in a previous answer already and it's a good idea) before authenticating the user, and use that as a required key to generate the access token.
An alternative which I haven't used yet but I've heard a lot about as a device-friendly alternative to oAuth is xAuth. Have a look at it and if you use it then I'd be really interested to hear what your impressions are.
For hashing, sha1 is a bit better but don't get hung up about it - whatever the devices can easily (and quickly in a performance sense) implement is probably fine.
Hope that helps, good luck :)
So what you're after is some kind of server side authentication mechanism that will handle the authentication and authorisation aspects of a mobile application?
Assuming this is the case, then I would approach it as follows (but only 'cos I'm a Java developer so a C# guy would do it differently):
The RESTful authentication and authorisation service
This will work only over HTTPS to prevent eavesdropping.
It will be based on a combination of RESTEasy, Spring Security and CAS (for single sign on across multiple applications).
It will work with both browsers and web-enabled client applications
There will be a web-based account management interface to allow users to edit their details, and admins (for particular applications) to change authorisation levels
The client side security library/application
For each supported platform (e.g.
Symbian, Android, iOS etc) create a
suitable implementation of the
security library in the native
language of the platform (e.g. Java,
ObjectiveC, C etc)
The library
should manage the HTTPS request
formation using the available APIs
for the given platform (e.g. Java
uses URLConnection etc)
Consumers of the general authentication and
authorisation library ('cos that's
all it is) will code to a specific
interface and won't be happy if it
ever changes so make sure it's very
flexible. Follow existing design
choices such as Spring Security.
So now that the view from 30,000ft is complete how do you go about doing it? Well, it's not that hard to create an authentication and authorisation system based on the listed technologies on the server side with a browser client. In combination with HTTPS, the frameworks will provide a secure process based on a shared token (usually presented as a cookie) generated by the authentication process and used whenever the user wishes to do something. This token is presented by the client to the server whenever any request takes place.
In the case of the local mobile application, it seems that you're after a solution that does the following:
Client application has a defined Access Control List (ACL) controlling runtime access to method calls. For example, a given user can read a collection from a method, but their ACL only permits access to objects that have a Q in their name so some data in the collection is quiety pulled by the security interceptor. In Java this is straightforward, you just use the Spring Security annotations on the calling code and implement a suitable ACL response process. In other languages, you're on your own and will probably need to provide boilerplate security code that calls into your security library. If the language supports AOP (Aspect Oriented Programming) then use it to the fullest for this situation.
The security library caches the complete list of authorisations into it's private memory for the current application so that it doesn't have to remain connected. Depending on the length of the login session, this could be a one-off operation that never gets repeated.
Whatever you do, don't try to invent your own security protocol, or use security by obscurity. You'll never be able to write a better algorithm for this than those that are currently available and free. Also, people trust well known algorithms. So if you say that your security library provides authorisation and authentication for local mobile applications using a combination of SSL, HTTPS, SpringSecurity and AES encrypted tokens then you'll immediately have creditibility in the marketplace.
Hope this helps, and good luck with your venture. If you would like more info, let me know - I've written quite a few web applications based on Spring Security, ACLs and the like.
Twitter addressed the external application issue in oAuth by supporting a variant they call xAuth. Unfortunately there's already a plethora of other schemes with this name so it can be confusing to sort out.
The protocol is oAuth, except it skips the request token phase and simply immediately issues an access token pair upon receipt of a username and password. (Starting at step E here.) This initial request and response must be secured - it's sending the username and password in plaintext and receiving back the access token and secret token. Once the access token pair has been configured, whether the initial token exchange was via the oAuth model or the xAuth model is irrelevant to both the client and server for the rest of the session. This has the advantage that you can leverage existing oAuth infrastructure and have very nearly the same implementation for mobile/web/desktop applications. The main disadvantage is that the application is granted access to the client's user name and password, but it appears like your requirements mandate this approach.
In any case, I'd like to agree with your intuition and that of several other answerers here: don't try to build something new from scratch. Security protocols can be easy to start but are always hard to do well, and the more convoluted they become the less likely your third-party developers are to be able to implement against them. Your hypothetical protocol is very similar to o(x)Auth - api_key/api_secret, nonce, sha1 hashing - but instead of being able to use one of the many existing libraries your developers are going to need to roll their own.
Super late to the party but I wanted to throw in some additional points to consider for anyone interested in this issue. I work for a company doing mobile API security solutions (approov) so this whole area is definitely relevant to my interests.
To start with, the most important thing to consider when trying to secure a mobile API is how much it is worth to you. The right solution for a bank is different to the right solution for someone just doing things for fun.
In the proposed solution you mention that a minimum of three parameters will be required:
apikey - given to developer at registration
timestamp - doubles as a unique identifier for each message for a given apikey
hash - a hash of the timestamp + the apisecret
The implication of this is that for some API calls no username/password is required. This can be useful for applications where you don't want to force a login (browsing in online shops for example).
This is a slightly different problem to the one of user authentication and is more like authentication or attestation of the software. There is no user, but you still want to ensure that there is no malicious access to your API. So you use your API secret to sign the traffic and identify the code accessing the API as genuine. The potential problem with this solution is that you then have to give away the secret inside every version of the app. If someone can extract the secret they can use your API, impersonating your software but doing whatever they like.
To counter that threat there are a bunch of things you can do depending on how valuable the data is. Obfuscation is a simple way to make it harder to extract the secret. There are tools that will do that for you, more so for Android, but you still have to have code that generates your hash and a sufficiently skilled individual can always just call the function that does the hashing directly.
Another way to mitigate against excessive use of an API that doesn't require a login is to throttle the traffic and potentially identify and block suspect IP addresses. The amount of effort you want to go to will largely depend upon how valuble your data is.
Beyond that you can easily start getting into the domain of my day job. Anyway, it's another aspect of securing APIs that I think is important and wanted to flag up.