I need to execute a complex query for testing purposes with params.
How to write a SELECT query which can be executed in DataGrip / PgAdmin with params:
EXECUTE 'SELECT * FROM tenant where id = $1'
USING 6;
END
(this doesn't work)
and I need to get the same result as from:
SELECT * FROM tenant where id = 6
Thank you
Finally found solution, even it's a bit tricky:
DO
$$
DECLARE
res RECORD;
BEGIN
drop table if exists my_temp_table;
EXECUTE 'CREATE TEMP TABLE my_temp_table AS
SELECT * FROM tenant where id = $1'
USING 3243;
END
$$;
select * from my_temp_table;
I'm writing a pl/sql function. I need to select multiple rows from select statement:
SELECT pel.ceid
FROM pa_exception_list pel
WHERE trunc(pel.creation_date) >= trunc(SYSDATE-7)
if i use:
SELECT pel.ceid
INTO v_ceid
it only stores one value, but i need to store all values that this select returns. Given that this is a function i can't just use simple select because i get error, "INTO - is expected."
You can use a record type to do that. The below example should work for you
DECLARE
TYPE v_array_type IS VARRAY (10) OF NUMBER;
var v_array_type;
BEGIN
SELECT x
BULK COLLECT INTO
var
FROM (
SELECT 1 x
FROM dual
UNION
SELECT 2 x
FROM dual
UNION
SELECT 3 x
FROM dual
);
FOR I IN 1..3 LOOP
dbms_output.put_line(var(I));
END LOOP;
END;
So in your case, it would be something like
select pel.ceid
BULK COLLECT INTO <variable which you create>
from pa_exception_list
where trunc(pel.creation_Date) >= trunc(sysdate-7);
If you really need to store multiple rows, check BULK COLLECT INTO statement and examples. But maybe FOR cursor LOOP and row-by-row processing would be better decision.
You may store all in a rowtype parameter and show whichever column you want to show( assuming ceid is your primary key column, col1 & 2 are some other columns of your table ) :
SQL> set serveroutput on;
SQL> declare
l_exp pa_exception_list%rowtype;
begin
for c in ( select *
from pa_exception_list pel
where trunc(pel.creation_date) >= trunc(SYSDATE-7)
) -- to select multiple rows
loop
select *
into l_exp
from pa_exception_list
where ceid = c.ceid; -- to render only one row( ceid is primary key )
dbms_output.put_line(l_exp.ceid||' - '||l_exp.col1||' - '||l_exp.col2); -- to show the results
end loop;
end;
/
SET SERVEROUTPUT ON
BEGIN
FOR rec IN (
--an implicit cursor is created here
SELECT pel.ceid AS ceid
FROM pa_exception_list pel
WHERE trunc(pel.creation_date) >= trunc(SYSDATE-7)
)
LOOP
dbms_output.put_line(rec.ceid);
END LOOP;
END;
/
Notes from here:
In this case, the cursor FOR LOOP declares, opens, fetches from, and
closes an implicit cursor. However, the implicit cursor is internal;
therefore, you cannot reference it.
Note that Oracle Database automatically optimizes a cursor FOR LOOP to
work similarly to a BULK COLLECT query. Although your code looks as if
it fetched one row at a time, Oracle Database fetches multiple rows at
a time and allows you to process each row individually.
I have a table that store the name of other tables. Like
COL_TAB
--------------
TABLE_NAME
--------------
TAB1
TAB2
TAB3
What i want to do is that, i want to run a sql query on table like this,
SELECT * FROM (SELECT TABLE_NAME from COL_TAB WHERE TABLE_NAME = 'TAB1')
Thanks
An Oracle SQL query can use a dynamic table name, using Oracle Data Cartridge and the ANY* types. But before you use those advanced features, take a step back and ask yourself if this is really necessary.
Do you really need a SQL statement to be that dynamic? Normally this is better handled by an application that can submit different types of queries. There are many application programming languages and toolkits that can handle unexpected types. If this is for a database-only operation, then normally the results are stored somewhere, in which case PL/SQL and dynamic SQL are much easier.
If you're sure you've got one of those rare cases that needs a totally dynamic SQL statement, you'll need something like my open source project Method4. Download and install it and try the below code.
Schema Setup
create table tab1(a number);
create table tab2(b number);
create table tab3(c number);
insert into tab1 values(10);
insert into tab2 values(20);
insert into tab3 values(30);
create table col_tab(table_name varchar2(30), id number);
insert into col_tab values('TAB1', 1);
insert into col_tab values('TAB1', 2);
insert into col_tab values('TAB1', 3);
commit;
Query
select * from table(method4.dynamic_query(
q'[
select 'select * from '||table_name sql
from col_tab
where id = 1
]'));
Result:
A
--
10
You'll quickly discover that queries within queries are incredibly difficult. There's likely a much easier way to do this, but it may require a design change.
I don't have a database by hand to test this but I think you are looking for something like this:
DECLARE
-- Create a cursor on the table you are looking through.
CURSOR curTable IS
SELECT *
FROM MainTable;
recTable curTable%ROWTYPE;
vcQuery VARCHAR2(100);
BEGIN
-- Loop through all rows of MainTable.
OPEN curTable;
LOOP
FETCH curTable INTO recTable;
EXIT WHEN curTable%NOTFOUND;
-- Set up a dynamic query, with a WHERE example.
vcQuery := 'SELECT ColumnA, ColumnB FROM ' || recTable.Table_Name || ' WHERE 1 = 1';
-- Execute the query.
OPEN :dyn_cur FOR vcQuery;
END LOOP;
CLOSE curTable;
END;
/
Try this
CREATE OR REPLACE PROCEDURE TEST IS
sql_stmt VARCHAR2(200);
V_NAME VARCHAR2(20);
BEGIN
sql_stmt := 'SELECT * FROM ';
EXECUTE IMMEDIATE sql_stmt|| V_NAME;
END;
Update
select statement dont work in procedure.
in sql server you can try sql block
Declare #name varchar2(50)
Select #name='Select * from '+TABLE_NAME from COL_TAB WHERE TABLE_NAME = 'TAB1'
EXEC(#name);
Here is my first procedure (sample)
CREATE OR REPLACE PROCEDURE GPTOWNER_CORP_AMF.testt1
AS
po_status VARCHAR2(100);
po_cur_1 SYS_REFCURSOR;
po_cur_2 SYS_REFCURSOR;
BEGIN
OPEN po_cur_1 FOR
select app_var_row_seq,app_var_name,app_var_value,app_var_description,r_date
from TMP_PMT_APP_VARIABLES_REF
where ROWNUM < 5;
OPEN po_cur_2 FOR
select config_to_lob_row_seq,config_row_seq,lobref_row_seq,r_date
from TMP_PMT_CONFIG_TO_LOB_DAT
where ROWNUM < 6;
TESTT2(po_cur_1,po_cur_2,po_status);
DBMS_output.put_line(po_status);
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE(SQLERRM||SQLCODE);
END;
Here is my second procedure (sample)
CREATE OR REPLACE procedure GPTOWNER_CORP_AMF.testt2 (pi_cur_1 IN sys_refcursor, pi_cur_2 IN sys_refcursor,po_status OUT VARCHAR2)
AS
app_var_row_seq NUMBER;
app_var_name VARCHAR2(100);
app_var_value VARCHAR2(1000);
app_var_description VARCHAR2(1000);
r_date1 DATE;
config_to_lob_row_seq NUMBER;
config_row_seq VARCHAR2(100);
lobref_row_seq NUMBER;
r_date2 DATE;
BEGIN
LOOP
FETCH pi_cur_1 into app_var_row_seq,app_var_name,app_var_value,app_var_description,r_date1;
FETCH pi_cur_2 into config_to_lob_row_seq,config_row_seq,lobref_row_seq,r_date2;
EXIT WHEN (pi_cur_2%NOTFOUND AND pi_cur_1%NOTFOUND ) ;
INSERT INTO testt1testt2 (colid,col1,col2,col3,col4,col5,col6,col7,col8,col9)
VALUES(colid.nextval,app_var_row_seq,app_var_name,app_var_value,app_var_description,r_date1,config_to_lob_row_seq,config_row_seq,lobref_row_seq,r_date2);
END LOOP;
DBMS_OUTPUT.PUT_LINE ('rows inserted:' || pi_cur_1%ROWCOUNT || 'and' || pi_cur_2%ROWCOUNT);
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE(SQLERRM||SQLCODE);
END;
My problem statement is that from first procedure I am getting two refcursor as output and in the second procedure I am trying to read them and put them into a temp table which will be used by another procedure. Cant union the two select statements as they are having different set of output. Is there any better mechanism to do so , as by my approach I am facing issue as when I run the first procedure (say first select return 4 row and second select return 6 rows) the need is that 6 rows would be inserted into temp table but the columns that are read from first select will be inserted as NULL when there is now row fetched , but in my case duplicate row is getting inserted. Any help would be appreciated. And do post if anyone needs more info on the same.
If I understand you right, then you don't really need to union them - but join them.
Since there is no really relation between the 2 tables and you want nulls in "both side"s you need to full outer join them.
I will not ask you, why you want them both on the same temp table if there is no relation between them. But if you do this why not just use an insert-select ?
INSERT INTO testt1testt2 (colid,col1,col2,col3,col4,col5,col6,col7,col8,col9)
SELECT colid.nextval, app_var_row_seq,app_var_name,app_var_value,app_var_description, t1.r_date,
config_to_lob_row_seq,config_row_seq,lobref_row_seq, t2.r_date
FROM (select app_var_row_seq,app_var_name,app_var_value,app_var_description,r_date
from TMP_PMT_APP_VARIABLES_REF
where ROWNUM < 5) t1
FULL OUTER JOIN (select config_to_lob_row_seq,config_row_seq,lobref_row_seq,r_date
from TMP_PMT_CONFIG_TO_LOB_DAT
where ROWNUM < 6) t2 on 1=2
UPDATE:
If the requirement is to get 2 refcursors, then my approach isn't relevant...
What you can do though, is have 2 insert commands one like this:
INSERT INTO testt1testt2 (colid,col1,col2,col3,col4,col5,col6,col7,col8,col9)
VALUES (colid.nextval,app_var_row_seq,app_var_name,app_var_value,app_var_description,r_date1,null,null,null,null);
and the other like:
INSERT INTO testt1testt2 (colid,col1,col2,col3,col4,col5,col6,col7,col8,col9)
VALUES (colid.nextval,null,null,null,null,null,config_to_lob_row_seq,config_row_seq,lobref_row_seq,r_date2);
If you really want to do it nicely, you can use bulk insert for performance, see example here
I have a Oracle DB with a table called myC. In this table I have a few row, two of them called myCheight, myCwidth.
I need to read these values and compare them like in IF myCheight > myCwidth DO switch the values.
I tried to read values from one row but didnt get it to work. I use Oracles Oracle SQL Developer.
This is what i came up with so far:
set serveroutput on;
DECLARE
cursor h is select * from MyC;
type htype is table of h%rowtype index by number;
stage_tab htype;
master_tab htype;
BEGIN
open h;
loop
fetch h bulk collect into stage_tab limit 500;
for i in 1 .. stage_tab.count loop
master_tab(stage_tab(i).id) := stage_tabe(i);
end loop;
exit when h%notfound;
end loop;
close h;
end;
Can't you just do this?
UPDATE myC
SET myCheight = myCwidth,
myCwidth = myCheight
WHERE myCheight > myCwidth