I have a column in my databricks table, with a customised date time format as string,
while trying to convert the string to datetime I am observing below error
PARSE_DATETIME_BY_NEW_PARSER
SQL Command
select to_date(ORDERDATE, 'M/dd/yyyy H:mm') from sales_kaggle_chart limit 10;
The format of ORDERDATE column is M/dd/yyyy H:mm
example of ORDERDATE columns 10/10/2003 0:00 and 8/25/2003 0:00
complete error message
Job aborted due to stage failure: [INCONSISTENT_BEHAVIOR_CROSS_VERSION.PARSE_DATETIME_BY_NEW_PARSER] You may get a different result due to the upgrading to Spark >= 3.0:
Fail to parse '5/7/2003' in the new parser. You can set "legacy_time_parser_policy" to "LEGACY" to restore the behavior before Spark 3.0, or set to "CORRECTED" and treat it as an invalid datetime string.
Note: the same command works for a single value
SELECT to_date("12/24/2003 0:00", 'M/d/yyyy H:mm') as date;
Have you tried setting to legacy parser, like the error message is hinting you?
SET legacy_time_parser_policy = legacy;
SELECT to_date(ORDERDATE, 'M/dd/yyyy H:mm') FROM sales_kaggle_chart LIMIT 10;
This error is quite common, and adjusting configuration typically does the job.
Related
I am facing error while converting the string to datetime format in databricks :
select to_date('01Jan1971:00:00:00','DDMONYYYY:HH:MI:SS')
Error in SQL statement: IllegalArgumentException: All week-based patterns are unsupported since Spark 3.0, detected: Y, Please use the SQL function EXTRACT instead
com.databricks.backend.common.rpc.DatabricksExceptions$SQLExecutionException: java.lang.IllegalArgumentException: All week-based patterns are unsupported since Spark 3.0, detected: Y, Please use the SQL function EXTRACT instead
at org.apache.spark.sql.catalyst.util.DateTimeFormatterHelper$.$anonfun$convertIncompatiblePattern$4(DateTimeFormatterHelper.scala:323)
at org.apache.spark.sql.catalyst.util.DateTimeFormatterHelper$.$anonfun$convertIncompatiblePattern$4$adapted(DateTimeFormatterHelper.scala:321)
This command worked
select to_date(upper('01Jan1971:00:00:00'),'ddMMMyyyy:HH:mm:ss')
I'm trying to parse a Date in a Pig script and i got the following error "Hadoop does not return any error message".
Here is the Date format example : 3/9/16 2:50 PM
And here is how I parse it :
data = LOAD 'cleaned.txt'
AS (Date, Block, Primary_Type, Description, Location_Description, Arrest, Domestic, District, Year);
times = FOREACH data GENERATE ToDate(Date, 'M/d/yy h:mm a') As Time;
You can see the data file here
Do you have any idea ?
Thanks
EDIT:
It look like the error is caused by the STORE command on "times".
If I do a DUMP then I got:
ERROR 1066: Unable to open iterator for alias times
It happen only when I use the ToDate function, I have other scripts that work perfectly.
First of all, you need to specify the loader in the LOAD statement:
USING PigStorage('\t')
I assumed that you're using tab separator.
Than if you have no schema specify the schema with type!
So you're load statement will be sg like this:
data = LOAD 'SO/date2parse.txt' USING PigStorage('\t') AS (Date:chararray, Block:chararray, Primary_Type:chararray, Description:chararray, Location_Description:chararray, Arrest:chararray, Domestic:chararray, District:chararray, Year:chararray);
For now I just use chararray type for everything, but you have to specify the type what is the right representation for you.
After this the date conversion just works fine as you wrote:
(2016-03-09T23:55:00.000Z)
(2016-03-09T23:55:00.000Z)
(2016-03-09T23:55:00.000Z)
My test script:
data = LOAD 'SO/date2parse.txt' USING PigStorage('\t') AS (Date:chararray, Block:chararray, Primary_Type:chararray, Description:chararray, Location_Description:chararray, Arrest:chararray, Domestic:chararray, District:chararray, Year:chararray);
times = FOREACH data GENERATE ToDate(Date, 'M/d/yy h:mm a') As Time;
DUMP times;
UPDATE:
Some explanation
By the way the default loader is pig storage
PigStorage is the default load function for the LOAD operator.
but it's nicer to specify.
The original issue caused by the lack of datatype
If you don't assign types, fields default to type bytearray
so the ToDate failed on the input type.
I have a question about powercenter message code: RR-4035. I have a mapping in which i am using a sql override query, this error is in sql override. This mapping is failing with an error,
'[IBM][CLI DRIVER]CLIO113E SQLSTATE 22007:An invalid datetime format
was detected, that is an invalid string representation or value was
specified'.
> Database driver error:
Function name:Fetch
SQL STMNT:
select s.employee_record_id,s.employee_id,s.record_origin,
cnt.employee_contract_id,cnt.employee_contract_efctv_dt,cnt.employee_contract_term_dt,club.employee_club
from
employee_main_info s
inner join
(select
employee_id,record_origin,employee_contract_term_dt,employee_contract_efctv_dt
from employee_perm
union
select
employee_id,record_origin,employee_contract_term_dt,employee_contract_efctv_dt
from employee_temp
) cnt on s.employee_id=cnt.employee_id,
employee_club_data club
where
club.employee_id=s.employee_id
and (cnt.employee_contract_efctv_dt <=sysdate or cnt.employee_contract_efctv_dt<'2016-01-01')
and s.employee_record_term_dt>sysdate;
native error code= -99999
I have tried everything, my previous mappings have run fine with the same datetime formats but this one is failing. One thing i have noticed is that if i remove all the transformations in between the source qualifier and target the mapping succeeds and data gets loaded to target, but as soon as i put any lookups or expressions between source qualifier and target except a pass through expression, the mapping fails again.
Any suggestion, any help regarding this is appreciated.
We've seen this error occurring when SELECTing from a table with a timestamp column via the IBM Data Server ODBC/CLI driver. It only happened on one Windows machine and we were able to make the error disappear by changing the regional setting main selection from Israel to USA.
While not tested yet, it may be that the IBM DB2 ODBC configuration option DateTimeStringFormat or the attributes SQL_ATTR_DATE_FMT and SQL_ATTR_TIME_FMT can be used to force a specific format (such as JIS). See https://www.ibm.com/support/knowledgecenter/en/SSEPGG_11.1.0/com.ibm.db2.luw.apdv.cli.doc/doc/r0011525.html
Good day!
I get this error:
SQL STATE 37000 [Microsoft][ODBC Microsoft Access Driver] Syntax Error
or Access Violation, when trying to run an embedded SQL statement on
Powerscript.
I am using MsSQL Server 2008 and PowerBuilder 10.5, the OS is Windows 7. I was able to determine one of the queries that is causing the problem:
SELECT top 1 CONVERT(DATETIME,:ls_datetime)
into :ldtme_datetime
from employee_information
USING SQLCA;
if SQLCA.SQLCODE = -1 then
Messagebox('SQL ERROR',SQLCA.SQLERRTEXT)
return -1
end if
I was able to come up with a solution to this by just using the datetime() function of PowerBuilder. But there are other parts of the program that is causing this and I am having a hard time in identifying which part of the program causes this. I find this very weird because I am running the same scripts here in my dev-pc with no problems at all, but when trying to run the program on my client's workstation I am getting this error. I haven't found any differences in the workstation and my dev-pc. I also tried following the instructions here, but the problem still occurs.
UPDATE: I was able to identify the other script that is causing the problem:
/////////////////////////////////////////////////////////////////////////////
// f_datediff
// Computes the time difference (in number of minutes) between adtme_datefrom and adtme_dateto
////////////////////////////
decimal ld_time_diff
SELECT top 1 DATEDIFF(MINUTE,:adtme_datefrom,:adtme_dateto)
into :ld_time_diff
FROM EMPLOYEE_INFORMATION
USING SQLCA;
if SQLCA.SQLCODE = -1 then
Messagebox('SQL ERROR',SQLCA.SQLERRTEXT)
return -1
end if
return ld_time_diff
Seems like passing datetime variables causes the error above. Other scripts are working fine.
Create a transaction user object inherited trom transaction.
Put logic in the sqlpreview of your object to capture and log the sql statement being sent to the db.
Instantiate it, connect to the db, and use it in your embedded sql.
Assuming the user gets the error you can then check what was being sent to the db and go from there.
The error in your first statement should be the second parameter to CONVERT function.
It's type is not a string, it's type is an valid expression
https://learn.microsoft.com/en-us/sql/t-sql/functions/cast-and-convert-transact-sql
So I would expect that your
CONVERT(DATETIME,:ls_datetime)
would evaluate to
CONVERT(DATETIME, 'ls_datetime')
but it should be
CONVERT(DATETIME, DateTimeColumn)
The error in your second statement could be that you're providing an wrong datetime format.
So please check if your error still occurs when you use this function
https://learn.microsoft.com/en-us/sql/t-sql/statements/set-dateformat-transact-sql
with the correct datetime format you're using
I´m using solr 3.2 version.
I need to get the current date in this format: yyyyMMdd and then use that result in a delta query
I´ve tried using this wiki http://wiki.apache.org/solr/DataImportHandler#A_VariableResolver
${dataimporter.functions.formatDate('NOW', yyyyMMdd)}
But I get this exception:
Throwable occurred: java.lang.NullPointerException
at org.apache.solr.handler.dataimport.EvaluatorBag$4.evaluate(EvaluatorBag.java:146)
at org.apache.solr.handler.dataimport.EvaluatorBag$5.get(EvaluatorBag.java:222)
at org.apache.solr.handler.dataimport.EvaluatorBag$5.get(EvaluatorBag.java:209)
at org.apache.solr.handler.dataimport.VariableResolverImpl.resolve(VariableResolverImpl.java:113)
at org.apache.solr.handler.dataimport.TemplateString.fillTokens(TemplateString.java:81)
at org.apache.solr.handler.dataimport.TemplateString.replaceTokens(TemplateString.java:75)
at org.apache.solr.handler.dataimport.VariableResolverImpl.replaceTokens(VariableResolverImpl.java:96)
at org.apache.solr.handler.dataimport.ContextImpl.replaceTokens(ContextImpl.java:256)
at org.apache.solr.handler.dataimport.SqlEntityProcessor.nextModifiedRowKey(SqlEntityProcessor.java:84)
at org.apache.solr.handler.dataimport.EntityProcessorWrapper.nextModifiedRowKey(EntityProcessorWrapper.java:262)
at org.apache.solr.handler.dataimport.DocBuilder.collectDelta(DocBuilder.java:884)
at org.apache.solr.handler.dataimport.DocBuilder.doDelta(DocBuilder.java:284)
at org.apache.solr.handler.dataimport.DocBuilder.execute(DocBuilder.java:178)
at org.apache.solr.handler.dataimport.DataImporter.doDeltaImport(DataImporter.java:374)
at org.apache.solr.handler.dataimport.DataImporter.runCmd(DataImporter.java:413)
at org.apache.solr.handler.dataimport.DataImporter$1.run(DataImporter.java:392)
You need to quote both arguments.
${dataimporter.functions.formatDate('NOW', 'yyyyMMdd')}