I want to use specific version of CMake 3.19.0 for Ubuntu 14.04 (32-bits) without installing CMake (use only binaries).
I tried to build CMake 3.19.0 on my test machine. It builded and installed successfully. In install_manifest.txt I see lot of files that were installed on my test system.
So, I tried to copy only installed binaries from /usr/local/bin/ (this is default path where CMake binaries were installed) and paste it to another machine that doesn't know about CMake. I paste 3 binaries: cmake, ctest, cpack to /usr/local/bin/.
If I run which cmake it shows path:
/usr/local/bin/cmake
If I run cmake --verison it shows:
CMake Error: Could not find CMAKE_ROOT !!!
CMake has most likely not been installed correctly.
Modules directory not found in
/usr/local/share/cmake-3.19
cmake version 3.19.0
CMake suite maintained and supported by Kitware (kitware.com/cmake).
It looks like CMake needs some modules that I haven't copied yet. I tried to build my cpp project and it shows me:
CMake Error: Could not find CMAKE_ROOT !!!
CMake has most likely not been installed correctly.
Modules directory not found in
/usr/local/share/cmake-3.19
CMake Error: Error executing cmake::LoadCache(). Aborting.
What are the minimum required modules needed for stable building? And where I should copy it?
Just copied builded Modules and Templates directories from cmake-3.19.0 build directory to /usr/local/share/cmake-3.19
I try build this khancyr/ardupilot_gazebo (github) plugin but I get this error after run sudo cmake ..
I use fedora35 so I cant run apt-get install libgazeboX-dev
what can I do for this problem ?
CMake Error at CMakeLists.txt:11 (find_package):
By not providing "Findgazebo.cmake" in CMAKE_MODULE_PATH this project has
asked CMake to find a package configuration file provided by "gazebo", but
CMake did not find one.
Could not find a package configuration file provided by "gazebo" with any
of the following names:
gazeboConfig.cmake
gazebo-config.cmake
Add the installation prefix of "gazebo" to CMAKE_PREFIX_PATH or set
"gazebo_DIR" to a directory containing one of the above files. If "gazebo"
provides a separate development package or SDK, be sure it has been
installed.
Have you tried running apt-get update && apt-get install ros-foxy-gazebo-ros-pkgs before running your command.
I am trying to run pip3 install face_recognition. But it gives below problem for cmake.
Building for: NMake Makefiles
CMake Error in CMakeLists.txt:
Generator
NMake Makefiles
does not support platform specification, but platform
x64
was specified.
CMake Error: CMAKE_C_COMPILER not set, after EnableLanguage
CMake Error: CMAKE_CXX_COMPILER not set, after EnableLanguage
pip3 version is 9.03, Python 3.7 and cmake 3.12.0-rc3. I don't have Visual studio. I don't have admin rights on my PC. Hence I downloaded the all the above packages, extracted and added their bin dir in path. Similar way I have installed MinGW and added its bin directory in path. Nothing is working. Couple of forums talk about removing CMakeCache.txt. I am struggling to find CMakeCache.txt. I think pip command is downloading the package, extracting in temp directory and compiling it. When compilation fails it delete the extracted content. Not sure. Please help
After carefully studying a logs, I realized it's Dlib installation a giving problem. After lots of search, I got the url https://www.learnopencv.com/install-opencv-3-and-dlib-on-windows-python-only. It suggest to use Anaconda. I installed the Anaconda and followed the instruction from article and discussions. It worked perfectly for me.
I am trying to build cmake 3.10.2 from source.
I already have cmake installed but an older version so I am running
cmake .
make
make install
but the machine I am on doesn't have gl and cmake fails on missing gl/gl.h is there a way to not require gl.h?
I've installed CMake 2.8.11.2 package from CMake's website for Mac 64-bit. We recently upgraded a project from Qt 4 to Qt 5 and the CMake upgrade is mandatory for CMake to use Qt 5. However, when I type cmake . I get the following error:
CMake Error: Could not find CMAKE_ROOT !!!
CMake has most likely not been installed correctly.
Modules directory not found in
/Applications/CMake 2.8-11.app/Contents/bin
CMake Error: Error executing cmake::LoadCache(). Aborting.
I can confirm, there is no modules directory in the bin folder. I really don't know how to resolve this error, or how to get the modules needed.
Do hash -r to clear the cache, then do cmake --version.
It should work.
I had the same problem after upgrading on Ubuntu.
Removing cmake and the cmake-data package before performing the update solved it for me.
sudo apt-get remove cmake cmake-data
Now perform the update via
sudo -E add-apt-repository -y ppa:george-edison55/cmake-3.x
sudo -E apt-get update
sudo apt-get install cmake
This worked for me :
cd cmake-3.4.3
./bootstrap --prefix=/usr
make
sudo make install
Additionally, you may encounter the same error when running CMake from Cygwin. This may be caused by a PATH variable listing /bin before /usr/bin: in this case CMake is launched as /bin/cmake instead of /usr/bin/cmake, and trying to load modules from //share/cmake-X.Y.Z (which is a UNC path on Windows) instead of /usr/share/cmake-X.Y.Z.
Explicitly export'ing a correct CMAKE_ROOT isn't helpful, and cmake keeps displaying the same misleading message.
The issue can be solved by setting PATH to /usr/bin:/bin:/everything/else in your .bash_profile.
I was able to fix this error on Linux (for other who may be searching for answer on Linux) while trying to upgrade cmake 2.8.11 to 2.8.12 by exporting the CMAKE_ROOT environment variable like so:
export CMAKE_ROOT=/path_to_install/cmake-2.8.12.2-Linux-i386/share/cmake-2.8
The share directory should be on the same level as your bin directory.
I got the same error message upgrading cmake-3.5.1 to cmake-3.7.1 on Ubuntu 16.04.01 LTS. I just updated the repositories with
sudo apt-get update
Then
cmake --version
brought up the correct and upgraded cmake version and the error messages was gone.
In my opinion/case this is a developer "problem". I suspect this occurs mostly to new developers so I go a bit deeper to put it in the right perspective:
To "not mess with" the original system files used for daily work and separate the new compiled and volatile programs in a separate location it is common to not just change but add/mount a complete folder structure similar to the original OS folder structure in a special "development" location.
So more or less a mirrored folder structure of the original one but connected/linked to the original resources.
There for we need to add an environment variable to our user bash profile where we tell the system: "link our development folders to the following direction/dir."
On Arch Linux this is done in a file in ~/.bashrc - that is linked/forwarded in/by the ~/.bash_profile ("~" stands for /home/your user name/) and MacOS/Unix will be similar.
To do that there are 2 ways:
you can open the .bashrc file and add your environment path to the bottom of it
or
you can use "export" to put the environment variables to the right place in your user bash file.
for kde development e.g. you need to add a path at the end of the ~/.bashrc file like so:
# Adding the kdesrc-build directory to the path
export PATH="$HOME/kde/src/kdesrc-build:$PATH"
what basically tells the system: the development is done in the /home/user name/kde/src folder - there are your files. You can choose where you want to locate your development environment.
If you execute cmake it "thinks" your files are in the original OS folder and the "Could not find CMAKE_ROOT" - message will disappear because it finds all your files since properly linked from your development folder structure to your system folder structure.
So basically to solve the problem you could just execute cmake in the right system folder - it just could mess up your system if the program or make files are not proper done so it is pulled to the home folder development folder structure. And you just have to tell that cmake, so it can find all needed files to compile your stuff, including the CMAKE_ROOT.
Another problem could be that cmake isn't properly installed.
On Arch Linux systems that can be made sure by using the "sudo pacman -Syu cmake" command and it copies the files in the right direction and sets the right user variables to get it executed and reinstall cmake if necessary.
Btw, if you are on other systems like Debian make sure to use a Debian apt repository, it can differ from the Ubuntu repository, especially if you compile for the chosen system.
I tried to write a general "beginners in mind" overview to get em a fundamental picture. Executing cmake in the right folder solved that exact problem for me that was asked for.
(Actual that flags works for the actual cmake version from the official arch repository:
1:
cd /home/ivanovic/kde/src/program_name
than:
2:
cmake -S/home/ivanovic/kde/src/program_name -B/home/ivanovic/kde/build/program_name -DCMAKE_INSTALL_PREFIX=/home/ivanovic/kde/usr -DCMAKE_BUILD_TYPE=Debug
Pay attention that between -S and /home/... is no space, same at -B and /home/...
This worked fine for my kde system software builds.
)
If anyone gets the following error:
Modules directory not found in
/usr/share/cmake-3.20
cmake version 3.20.2
Solution which worked for me:
sudo cp -r /share/cmake-3.20 /usr/share/
The above command copies the cmake-3.20 directory from /share to /usr/share
This also happened to me on a fresh install of Ubuntu 21.04 and was fixed by installing it from "snap":
sudo snap install cmake --classic
(and then making sure that /snap/bin is in $PATH)
tl;dr: check the permission of folder /usr/local/share/cmake-x.xx.
I had a similar problem with the cmake that I build from source code. I compile the code with the following command.
./configure
make
sudo make install
and the binary files were placed into /usr/local/bin as expected. But I will encounter the same problem when executing cmake without sudo privilege. This is because the normal user don't have reading permission with folder /usr/local/share/cmake-3.xx.
The error went away when I give myself the permission to read/execute, with the command.
sudo chmod 755 /usr/local/share/cmake-3.xx
(xx will be the specific version that you installed.)