To move files from multiple source folders to multiple destination folders based on two hour delay - vba

Question

Yesterday we have finalized and tested the code (the first part of the code is VBScript) and the second part of the code is (in Excel VBA) to move file from one source folder to one destination folder successfully based on two hour delay (i.e. each file which will come to source folder will upload 2 hour delay), however the situation is that i have actually 15 source folders and 15 destination folders.
One method is that i should create 15 VBScript files and 15 Excel files that contains the code for each source and destination folder which i believe is not efficient way. I have tried a lot to add multiple source and destination folder options in the below mentioned code(s) but i am not successful, can anyone help me, i will be thankful.
the below mentioned code is VBscript
Dim oExcel, strWB, nameWB, wb
strWB = "E:\Delta\Folder monitor.xlsm"
nameWB = Left(strWB, InStr(StrReverse(strWB), "\") - 1)
nameWB = Right(strWB, Len(nameWB))
Set objExcel = GetObject(,"Excel.Application")
Set wb = objExcel.Workbooks(nameWB)
if wb is nothing then wbscript.quit 'the necessary workbook is not open...
dim strComputer, strDirToMonitor, strTime, objWMIService, colMonitoredEvents, objEventObject, MyFile
strComputer = "."
'# WMI needs two backslashes (\\) as path separator and each of it should be excaped.
'# So, you must use 4 backslashes (\\\\) as path separator!
strDirToMonitor = "E:\\\\Delta\\\\Source" 'use here your path
'# Monitor Above every 10 secs...
strTime = "10"
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colMonitoredEvents = objWMIService.ExecNotificationQuery _
("SELECT * FROM __InstanceOperationEvent WITHIN " & strTime & " WHERE " _
& "Targetinstance ISA 'CIM_DirectoryContainsFile' and " _
& "TargetInstance.GroupComponent= " _
& "'Win32_Directory.Name=" & Chr(34) & strDirToMonitor & Chr(34) & "'")
Do While True
Set objEventObject = colMonitoredEvents.NextEvent()
Select Case objEventObject.Path_.Class
Case "__InstanceCreationEvent"
' msgbox "OK"
'MsgBox "A new file was just created: " & _
MyFile = StrReverse(objEventObject.TargetInstance.PartComponent)
'// Get the string to the left of the first \ and reverse it
MyFile = (StrReverse(Left(MyFile, InStr(MyFile, "\") - 1)))
MyFile = Mid(MyFile, 1, Len(MyFile) - 1)
'send the information to the waiting workbook:
objExcel.Application.Run "'" & strWB & "'!GetMonitorInformation", Array(MyFile,Now)
End Select
Loop
and the second code for this purpose should be copied in a standard module:
Option Explicit
Private Const ourScript As String = "FolderMonitor.vbs"
Private Const fromPath As String = "E:\Delta\Source\"
Sub startMonitoring()
Dim strVBSPath As String
strVBSPath = ThisWorkbook.Path & "\VBScript\" & ourScript
TerminateMonintoringScript 'to terminate monitoring script, if running..
Shell "cmd.exe /c """ & strVBSPath & """", 0
End Sub
Sub TerminateMonintoringScript()
Dim objWMIService As Object, colItems As Object, objItem As Object, Msg
As String
Set objWMIService = GetObject("winmgmts:\\" & "." & "\root\CIMV2")
Set colItems = objWMIService.ExecQuery("SELECT * FROM Win32_Process", "WQL", 48)
For Each objItem In colItems
If objItem.Caption = "wscript.exe" Then
'// msg Contains the path of the exercutable script and the script name
On Error Resume Next
Msg = objItem.CommandLine 'for the case of null
On Error GoTo 0
'// If wbscript.exe runs the monitoring script:
If InStr(1, Msg, ourScript) > 0 Then
Debug.Print "Terminate Wscript process..."
objItem.Terminate 'terminate process
End If
End If
Next
Set objWMIService = Nothing: Set colItems = Nothing
End Sub
Sub GetMonitorInformation(arr As Variant)
'call DoSomething Sub after 2 hours (now IT WILL RUN AFTER 1 MINUTE, for testing reasons...)
'for running after 2 hours you should change "00:01:00" in "02:00:00":
arr(0) = Replace(arr(0), "'", "''") 'escape simple quote (') character'
Application.OnTime CDate(arr(1)) + TimeValue("00:01:00"), "'DoSomething """ & CStr(arr(0)) & """'"
Debug.Print "start " & Now 'just for testing (wait a minute...)
'finaly, this line should be commented.
End Sub
Sub DoSomething(strFileName As String)
Const toPath As String = "E:\Delta\Destination\"
If Dir(toPath & strFileName) = "" Then
Name fromPath & strFileName As toPath & strFileName
Debug.Print strFileName & " moved from " & fromPath & " to " & toPath 'just for testing...
Else
MsgBox "File """ & toPath & strFileName & """ already exists in this location..."
End If
End Sub
you can see the previous query here on the link Previous Query

Answer 1

Please, use the next scenario. It assumes that you will fill the necessary path in an existing Excel sheet. Since, it will take the necessary paths based on a cell selection, it is necessary to name the sheet in discussion as "Folders". In Column A:A you should fill the 'Source' folder path (ending in backslash "") and in B:B, the 'Destination' folder path (also ending in backslash).
The proposed solution takes the necessary paths based on your selection in A:A column. The 'Destination' path is extracted based on the selection row.
Please, replace the existing string with the next one, adapting the two necessary paths:
Dim oExcel, strWB, nameWB, wb
strWB = "C:\Teste VBA Excel\Folder monitor.xlsm" 'use here your workbook path!!!
nameWB = Left(strWB, InStr(StrReverse(strWB), "\") - 1)
nameWB = Right(strWB, Len(nameWB))
Set objExcel = GetObject(,"Excel.Application")
Set wb = objExcel.Workbooks(nameWB)
if wb is nothing then wbscript.quit 'the necessary workbook is not open...
dim strComputer, strDirToMonitor, strTime, objWMIService, colMonitoredEvents, objEventObject, MyFile
strComputer = "."
'# WMI needs two backslashes (\\) as path separator and each of it should be excaped.
'# So, you must use 4 backslashes (\\\\) as path separator!
strDirToMonitor = "C:\\\\test\\\\test" 'use here your path !!!
'# Monitor Above every 10 secs...
strTime = "10"
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colMonitoredEvents = objWMIService.ExecNotificationQuery _
("SELECT * FROM __InstanceOperationEvent WITHIN " & strTime & " WHERE " _
& "Targetinstance ISA 'CIM_DirectoryContainsFile' and " _
& "TargetInstance.GroupComponent= " _
& "'Win32_Directory.Name=" & Chr(34) & strDirToMonitor & Chr(34) & "'")' and " _
' & "'Win32_Directory.Name=" & Chr(34) & strDirToMonitor & Chr(34) & "'")
Do While True
Set objEventObject = colMonitoredEvents.NextEvent()
Select Case objEventObject.Path_.Class
Case "__InstanceCreationEvent"
MyFile = StrReverse(objEventObject.TargetInstance.PartComponent)
' Get the string to the left of the first \ and reverse it
MyFile = (StrReverse(Left(MyFile, InStr(MyFile, "\") - 1)))
MyFile = Mid(MyFile, 1, Len(MyFile) - 1)
'send the information to the waiting workbook:
objExcel.Application.Run "'" & strWB & "'!GetMonitorInformation", Array(MyFile, Now, strDirToMonitor)
End Select
Loop
The adapted script sends also the source path to the waiting workbook...
TerminateMonintoringScript Sub remains exactly as it is.
Please, copy the next adapted code instead of existing one, in the used standard module (TerminateMonintoringScript included, even not modified):
Option Explicit
Private Const ourScript As String = "FolderMonitor.vbs"
Private fromPath As String, toPath As String
Sub startMonitoring()
Dim strVBSPath As String, actCell As Range, strTxt As String, pos As Long, endP As Long, oldPath As String
Set actCell = ActiveCell
If actCell.Parent.Name <> "Folders" Then MsgBox "Wrong activated sheet...": Exit Sub
fromPath = actCell.Value
If actCell.Column <> 1 Or Dir(fromPath, vbDirectory) = "" Then Exit Sub 'not a valid path in the selected cell
strVBSPath = ThisWorkbook.Path & "\VBScript\" & ourScript
'change the script necessary "strDirToMonitor" variable path, if the case:__________________________
strTxt = ReadFile(strVBSPath)
pos = InStr(strTxt, Replace(fromPath, "\", "\\\\"))
If pos = 0 Then 'if not the correct path already exists
pos = InStr(strTxt, "strDirToMonitor = """) 'start position of the existing path
endP = InStr(strTxt, """ 'use here your path") 'end position of the existing path
'extract existing path:
oldPath = Mid(strTxt, pos + Len("strDirToMonitor = """), endP - (pos + Len("strDirToMonitor = """)))
strTxt = Replace(strTxt, oldPath, _
Replace(Left(fromPath, Len(fromPath) - 1), "\", "\\\\")) 'replacing existing with the new one
'drop back the updated string in the vbs file:
Dim iFileNum As Long: iFileNum = FreeFile
Open strVBSPath For Output As iFileNum
Print #iFileNum, strTxt
Close iFileNum
End If
'__________________________________________________________________________________________________
TerminateMonintoringScript 'to terminate monitoring script, if running...
Application.Wait Now + TimeValue("00:00:02") 'to be sure that the next line will load the updated file...
Shell "cmd.exe /c """ & strVBSPath & """", 0 'run the VBScript
End Sub
Function ReadFile(strFile As String) As String 'function to read the vbscript string content
Dim iTxtFile As Integer
iTxtFile = FreeFile
Open strFile For Input As iTxtFile
ReadFile = Input(LOF(iTxtFile), iTxtFile)
Close iTxtFile
End Function
Sub TerminateMonintoringScript()
Dim objWMIService As Object, colItems As Object, objItem As Object, Msg As String
Set objWMIService = GetObject("winmgmts:\\" & "." & "\root\CIMV2")
Set colItems = objWMIService.ExecQuery("SELECT * FROM Win32_Process", "WQL", 48)
For Each objItem In colItems
If objItem.Caption = "wscript.exe" Then
'// msg Contains the path of the exercutable script and the script name
On Error Resume Next
Msg = objItem.CommandLine 'for the case of null
On Error GoTo 0
'// If wbscript.exe runs the monitoring script:
If InStr(1, Msg, ourScript) > 0 Then
Debug.Print "Terminate Wscript process..."
objItem.Terminate 'terminate process
End If
End If
Next
Set objWMIService = Nothing: Set colItems = Nothing
End Sub
Sub GetMonitorInformation(arr As Variant)
'call DoSomething Sub after 2 hours (now IT WILL RUN AFTER 1 MINUTE, for testing reasons...)
'for running after 2 hours you should change "00:01:00" in "02:00:00":
arr(0) = Replace(arr(0), "'", "''") 'escape simple quote (') character'
fromPath = Replace(arr(2), "\\\\", "\")
Dim rngFrom As Range: Set rngFrom = ThisWorkbook.Sheets("Folders").Range("A:A").Find(what:=fromPath)
toPath = rngFrom.Offset(, 1).Value
Application.OnTime CDate(arr(1)) + TimeValue("00:00:30"), "'DoSomething """ & fromPath & "\" & CStr(arr(0)) & """, """ & toPath & CStr(arr(0)) & """'"
Debug.Print Now; " start " & arr(0) & fromPath & "\" & CStr(arr(0)) 'just for testing (wait a minute...)
'finaly, this line should be commented.
End Sub
Sub DoSomething(sourceFileName As String, destFilename As String)
If Dir(destFilename) = "" Then
Name sourceFileName As destFilename
Debug.Print sourceFileName & " moved to " & destFilename 'just for testing...
Else
Debug.Print "File """ & destFilename & """ already exists in this location..."
End If
End Sub
Sub DoSomething_(strFileName As String) 'cancelled
If Dir(toPath & strFileName) = "" Then
Name fromPath & strFileName As toPath & strFileName
Debug.Print strFileName & " moved from " & fromPath & " to " & toPath 'just for testing...
Else
MsgBox "File """ & toPath & strFileName & """ already exists in this location..."
End If
End Sub
So, you only need to replace the existing VBA code with the above adapted one, to place the 'source'/'destination' paths in columns A:B of one of Excel sheets, which to be named "Folders".
Select in column A:A a 'Source' cell and run startMonitoring.
Play with files creation and check their moving from the new 'source' to the new 'destination'...
But you have to understand that only a session of the WMI class can run at a specific moment. This means that you cannot simultaneously monitor more than one folder...
I am still documenting regarding the possibility to use a query able to be common for multiple folders. But I never could see such an approach till now and it may not be possible...