So basically VBA is giving me "Erro 91" and pointing out to the "Window_Designer.Show vbModeless". What I want is a basic userform to show up so I can fill the numbers, but whenever I run the code, the error pops up. What am I doing wrong?
Private Sub Custom_Window_Click()
'Call custom window userform
Windows_and_Secondary_Frames.Hide
Window_Designer.Show vbModeless
End Sub
Related
I'm using Office Professional Plus 2019. I have a ListBox that sometimes freezes the macro. The UserForm (AffDateSelector) has a ListBox (DateSelectionList) and a Button (Continue). The UserForm is called from the driving Sub with AffDateSelector.show. The code for the form is below:
Option Explicit
Private Sub Continue_Click()
Dim lngCurrItem As Long
'Assign the selected value to the public variable strClassDate.
For lngCurrItem = 0 To DateSelectionList.ListCount - 1
If DateSelectionList.Selected(lngCurrItem) = True Then
strClassDate = DateSelectionList.List(lngCurrItem)
End If
Next lngCurrItem
'Unload the form and return to the calling Sub.
Unload Me
End Sub
Private Sub DateSelectionList_Click()
End Sub
Private Sub UserForm_Click()
End Sub
Private Sub UserForm_initialize()
'Load ListBoxAccounts with the public variable strDateArray
With DateSelectionList
.List = strDateArray
End With
'Default the first row in DateSelectionList to be selected.
DateSelectionList.Selected(0) = True
End Sub
I've been using F8 to step through the code. When the form is shown, the UserForm_initialize() sub is executed and the data display properly. If the user does nothing else except click the Continue button, the Continue_Click() sub gets executed, the variable strClassDate is populated, control is returned to the calling sub and all is well.
The problem comes when the user selects an item other than the one defaulted in the list. Once the user clicks on the ListForm, the sub DateSelectionList_Click() is executed, but there's nothing in that sub, so the macro freezes. If I put in "dummy code" into DateSelectionlist_Click() (e.g. strClassDate = strClassDate) that line is executed and then the macro freezes when the End Sub statement is executed.
How can I allow the user to click on a non-defaulted item in the list, keep the form displayed, and wait for the Continue button to be pressed?
The code was fine. I had a lot of windows open and the pop-up didn't appear I was running the code from the VB editor but the pop-up never appeared. When I pressed Alt + Tab it didn't appear in that list either.
I must be missing something basic (no pun intended), but I can't figure this out.
I have a MS Word VBA form called frmChooseMacros. I want to execute a subroutine on an Open or Load event for that form before the user interacts with the form.
From this topic https://learn.microsoft.com/en-us/office/vba/api/access.form.open, I came up with this code as a test and added it to the code window for frmChooseMacros:
Private Sub Form_Open(Cancel As Integer)
MsgBox "Running open event"
End Sub
But it never executes when the form loads.
From this topic, https://learn.microsoft.com/en-us/office/vba/api/access.form.load, I also tried the Load event, like this, but still no joy:
Private Sub Form_Load()
MsgBox "Running open event"
End Sub
I'm running the form through this sub-routine...
Sub DocFix_00_RunMultipleMacros()
frmChooseMacros.Show
End Sub
...which executes when a button tied is clicked on the menu.
This image may help provide additional context:
Any help is appreciated. Thank you!
(Credit goes to #braX for helping me find the answer here.)
For Word, you have to use the UserForm_Initialize or UserForm_Activate events. There is no Form_Load or Form_Open events for Word.
I was able to solve this by first defining a UserForm object and setting it to my frmChooseMacros user form:
Sub DocFix_00_RunMultipleMacros()
Dim oForm As UserForm
Set oForm = New frmChooseMacros
frmChooseMacros.Show
End Sub
Then I use the UserForm_Activate event here:
Private Sub UserForm_Activate()
MsgBox "Form has activated."
End Sub
I am attempting to have my end sub when I click cancel. However, I am getting a Run-Time Error when I do so.
I am just trying to close the dialog box which I did with an Else: Exit Sub statement. However, it still shows the Run-Time Error, while it should just exit sub.
This was a simple fix of just adding an ErrorHandler like so:
Public Sub Run_Split()
On Error GoTo ErrHandler
'Call Private Subs
Exit Sub
ErrHandler:
MsgBox "User Cancelled Program", vbCritical
End Sub
Thank you to everyone that has helped me on this site in the past, your help as allowed me to be somewhat self taught in VBA and I was able to solve this without asking for assistance.
I have created a userform that has two buttons on it. One is called CmdCon6 and the other is called CmdLbs6. When clicked, they are suppose to close the current userform, pull up another userform, and pull values from the 4th column in sheet18 and add them to a combobox named x48 (both of the new userforms have a combobox named x48)in the new userform. The range of cell values to be added to the combobox x48 will flucuate, but never exceed 20 (hence why I added a loop). Everything works great and does what it is suppose to do when I click the CmdCon6 button, but when I click the CmdLbs button, it gives me a run-time error '70' Permission denied and highlights the 20th line of code (line between the If and end if in the Sub CmdLbs_Click()).
I have tried to change the name of the combobox x48 in the frmInputLbs6 userform and keep it as x48 for the frmInputCon6 userform, but I still received the same error.
Any suggestions to fix this issue? I'm stumped, and can't think of a way around it. Thanks in advance!
Private Sub CmdCon6_Click()
Unload Me
For x = 1 To 20
If Sheet18.Cells(x, 4).Value <> "" Then
frmInputCon6.x48.AddItem Sheet18.Cells(x, 4)
End If
Next x
frmInputCon6.Show
End Sub
Private Sub CmdLbs6_Click()
Unload Me
For x = 1 To 20
If Sheet18.Cells(x, 4).Value <> "" Then
frmInputLbs6.x48.AddItem Sheet18.Cells(x, 4)
End If
Next x
frmInputLbs6.Show
End Sub
Controls on UserForms are private by default. You need to access them through the Controls collection:
Private Sub CmdLbs6_Click()
Unload Me
For x = 1 To 20
If Sheet18.Cells(x, 4).Value <> "" Then
frmInputLbs6.Controls("x48").AddItem Sheet18.Cells(x, 4)
End If
Next x
frmInputLbs6.Show
End Sub
I'd also note that although you mention that "they are suppose to close the current userform", this isn't what happens. Your forms also aren't actually being fully unloaded until the other form is closed. The .Show method defaults to modal so in the code above frmInputCon6 doesn't fully unload until after frmInputLbs6 is closed.
Just something to keep in mind, because it really messes up your event stack. You can see the results by with this simple test code. Add UserForm1 and UserForm2, and put a button on each of them and the following code:
UserForm1:
Private Sub CommandButton1_Click()
Unload Me
UserForm2.Show
End Sub '<--Put a breakpoint here.
Private Sub UserForm_Terminate()
Debug.Print "UserForm1 closed"
End Sub
UserForm2:
Private Sub CommandButton1_Click()
Unload Me
UserForm1.Show
End Sub '<--Put a breakpoint here.
Private Sub UserForm_Terminate()
Debug.Print "UserForm2 closed"
End Sub
Put a breakpoint on the End Subs of each Click() event, fire up one of the forms and hit the buttons to hop back and forth a few times. Then close one of the forms and count how many times you hit the breakpoints before you actually exit.
I kept a userform control button in my worksheet to fire up a macro, which in turn shows a user form, In the form I wish to display the opened files in checkboxes(using the Workbooks collection).I wish to run a macro that performs action for the user selected files only.
So for the button in my worksheet, I have assigned the following macro
Private Sub Button2_Click()
Load MyForm
MyForm.Show
End Sub
At first I kept the below code in the module where my macro sub is there.Since it's not working, I right clicked on user form and selected view code and kept the below code there.But still it's showing the same static designed user form, not the dynamic.I kept breakpoint at both load Myform and MYform.Show() and I stepped through code.It never went into intialize or activate method at all.
Private Sub MyForm_Activate()
'for checking the whether this method is called or not I am trying to change caption
MyForm.LabelSelectFile.Caption = "dhfdfldkfldzjf;zdfkz;d"
Dim mymyWorkBook As Workbook
For Each mymyWorkBook In Workbooks
'code for creating checkbox based on the file name displayed by the workbook collection
Next mymyWorkBook
End Sub
I can't understand why that event is not getting triggered.Please help me to overcome this.Thanks in advance
Even though the name of the form is MyForm, you still need to use userform.
'~~> in your worksheet
Private Sub Button2_Click()
MyForm.Show
End Sub
'~~> In the userform code area
Private Sub UserForm_Initialize()
'~~> Your code here
End Sub
or
Private Sub UserForm_Activate()
End Sub
The best is to always select the event from the drop down, rather than typing it