Related
I have several ms access databases that contain many lines of VBA code. All this worked fine up until a few months ago when network security software called Cylance was installed. This Cylance prevents many different types scripts and programs from running. Cylance uses something called a 'Whitelist' folder from which you should be able execute code that is known to be safe.
In the Whitelist folder I have database, when I try to run code that I know worked a few months ago I get a runtime error 13 Type Mismatch. However there is no mismatch and this code executed fine in the past.
Is anybody else working in Cylance environment? Have you had Error 13 Type Mismatch? How to fix it?
The main thing I've tried is working from the Whitelist folder, I don't know what else to try.
I tested Cylance and I had to uninstall it because it had too many false positives. Not even with VBA code. It was blocking legitimate applications that we needed. I could whitelist an application but then I needed to whitelist it again every time the application was updated. If you are developing software you would have the same problem. You would have to whitelist every build. I can see how this would cripple your Access development. Cylance keeps you safe from VBA attacks in a way that other AV solutions do not but the trade off is that it also blocks VBA code that you know is safe. Open a ticket with their support team. Good luck.
My firm's Access database has been having some serious problems recently. The errors we're getting seem like they indicate corruption -- here are the most common:
Error accessing file. Network connection may have been lost.
There was an error compiling this function.
No error, Access just crashes completely.
I've noticed that these errors only happen with a compiled database. If I decompile it, it works fine. If I take an uncompiled database and compile it, it works fine -- until the next time I try to open it. It appears that compiling the database into a .ACCDE file solves the problem, which is what I've been doing, but one person has reported that the issue returned for her, which has me very nervous.
I've tried exporting all of the objects in the database to text, starting with a brand new database, and importing them all again, but that doesn't solve the problem. Once I import all of the objects into the clean database, the problem comes back.
One last point that seems be related, but I don't understand how. The problem started right around the time that I added some class modules to the database. These class modules use the VBA Implements keyword, in an effort to clean up my code by introducing some polymorphism. I don't know why this would cause the problem, but the timing seems to indicate a relationship.
I've been searching for an explanation, but haven't found one yet. Does anyone have any suggestions?
EDIT: The database includes a few references in addition to the standard ones:
Microsoft ActiveX Data Objects 2.8
Microsoft Office 12.0
Microsoft Scripting Runtime
Microsoft VBScript Regular Expressions 5.5
Some of the things I do and use when debugging Access:
Test my app in a number of VM. You can use HyperV on Win8, VMWare or VirtualBox to set up various controlled test environments, like testing on WinXP, Win7, Win8, 32bit or 64 bits, just anything that matches the range of OS and bitness of your users.
I use vbWatchDog, a clever utility that only adds a few classes to your application (no external dependency) and allows you to trap errors at high level, and show you exactly where they happen. This is invaluable to catch and record strange errors, especially in the field.
If the issue appears isolated to one or a few users only, I would try to find out what is special about their config. If nothing seems out of place, I would completely unsintall all Office component and re-install it after scrubbing the registry for dangling keys and removing all traces of folders from the old install.
If your users do not need a complete version of Access, just use the free Access Runtime on their machine.
Make sure that you are using consistent versions of Access throughout: if you are using Access 2007, make sure your dev machine is also using that version and that all other users are also only using that version and that no components from Access 2010/2013 are present.
Try to ascertain if the crash is always happening around the same user-actions. I use a simple log file that I write to when a debugging flag is set. The log file is a simple text file that I open/write to/close everytime I log something (I don't keep it open to make sure the data is flushed to the file, otherwise when Access crashes, you may only have old data in the log file as the new one may still be in the buffer). Things I log are, for instance, sensitive function entry/exit, SQL queries that I execute from code, form open/close, etc.
As a generality, make sure your app compiles without issue (I mean when doing Debug > Compile from the IDE). Any issue at this stage must be solved.
Make absolutely sure you close all open recordsets, preferrably followed by setting their variables to Nothing. VBA is not as sensitive as it used to be about dangling references, but I found it good practice, especially when you cannot be absolutely sure that these references will be freed (especially when doing stuff at Module-level or Class-level for instance, where the scope may be longer-lived than expected).
Similarly, make sure you properly destroy any COM object you create in your classes (and subs/functions. The Class_Terminate destructor must explicitly clean up all. This is also valid when closing forms if you created COM objects (you mentioned using ADOX, scripting objects and regex). In general keeping track of created objects is paramount: make sure you explicitly free all your objects by resetting them (for instance using RemoveAll on a dictionary, then assigning their reference to Nothing.
Do not over-use On Error Resume or On Error Goto. I almost never use these except when absolutely necessary to recover from otherwise undetectable errors. Using these error trapping constructs can hide a lot of errors that would otherwise show you that something is wrong with your code. I prefer to program defensively than having to handle exceptions.
For testing, disable your error trapping to see if it isn't hiding the cause of your crashes.
Make sure that the front-end is local to the user machine, You mention they get their individual front-end from the network but I'm not sure if they run it from there or if it it copied on their local machine. At any rate, it should be local not on a remote folder.
You mention using SQL Server as a backend. Try to trace all the queries being executed. It's possible that the issue comes from communication with SQL Server, a corrupt driver, a security issue that prevents some queries from being run, a query returning unexpected data, etc. Watch the log files and event log on the server closely for strange errors, especially if they involve security.
Speaking of event log, look for the trace of the crash in the event log of your users. There may be information there, however cryptic.
If you use custom ribbon actions, make sure thy are not causing issues. I had strange problems over time with the ribbon. Log all all function calls made by the ribbon.
I'm working on a project which will entail multiple devices, each with an embedded (ARM) processor, communicating. One development approach which I have found useful in the past with projects that only entailed a single embedded processor was develop the code using Visual Studio, divided into three portions:
Main application code (in unmanaged C/C++ [see note])
I/O-simulating code (C/C++) that runs under Visual Studio
Embedded I/O code (C), which Visual Studio is instructed not to build, runs on the target system. Previously this code was for the PIC; for most future projects I'm migrating to the ARM.
Feeding the embedded compiler/linker the code from parts 1 and 3 yields a hex file that can run on the target system. Running parts 1 and 2 together yields code which can run on the PC, with the benefit of better debugging tools and more precise control over I/O behavior (e.g. I can make the simulation code introduce certain types of random hiccups more easily than I can induce controlled hiccups on real hardware).
Target code is written in C, but the simulation environment uses C++ so as to simulate I/O registers. For example, I have a PortArray data structure; the header file for the embedded compiler includes a line like unsigned char LATA # 0xF89; and my header file for simulation includes #define LATA _IOBIT(f89,1) which in turn invokes a macro that accesses a suitable property of an I/O object, so a statement like LATA |= 4; will read the simulated latch, "or" the read value with 4, and write the new value. To make this work, the target code has to compile under C++ as well as under C, but this mostly isn't a problem. The biggest annoyance is probably with enum types (which behave as integers in C, but have to be coaxed to do so in C++).
Previously, I've used two approaches to making the simulation interactive:
Compile and link a DLL with target-application and simulation code, and have VB code in the same project which interacts with it.
Compile the target-application code and some simulation code to an EXE with instance of Visual Studio, and use a second instance of Visual Studio for the simulation-UI. Have the two programs communicate via TCP, so nearly all "real" I/O logic is in the simulation program. For example, the aforementioned `LATA |= 4;` would send a "read port 0xF89" command to the TCP port, get the response, process the received value, and send a "write port 0xF89" command with the result.
I've found the latter approach to run a tiny bit slower than the former in some cases, but it seems much more convenient for debugging, since I can suspend execution of the unmanaged simulation code while the simulation UI remains responsive. Indeed, for simulating a single target device at a time, I think the latter approach works extremely well. My question is how I should best go about simulating a plurality of target devices (e.g. 16 of them).
The difficulty I have is figuring out how to make each simulated instance get its own set of global variables. If I were to compile to an EXE and run one instance of the EXE for each simulated target device, that would work, but I don't know any practical way to maintain debugger support while doing that. Another approach would be to arrange the target code so that everything would compile as one module joined together via #include. For simulation purposes, everything could then be wrapped into a single C++ class, with global variables turning into class-instance variables. That would be a bit more object-oriented, but I really don't like the idea of forcing all the application code to live in one compiled and linked module.
What would perhaps be ideal would be if the code could load multiple instances of the DLL, each with its own set of global variables. I have no idea how to do that, however, nor do I know how to make things interact with the debugger. I don't think it's really necessary that all simulated target devices actually execute code simultaneously; it would be perfectly acceptable for simulation instances to use cooperative multitasking. If there were some way of finding out what range of memory holds the global variables, it might be possible to have the 'task-switch' method swap out all of the global variables used by the previously-running instance and swap in the contents applicable to the instance being switched in. Although I'd know how to do that in an embedded context, though, I'd have no idea how to do that on the PC.
Edit
My questions would be:
Is there any nicer way to allow simulation logic to be paused and examined in VS2010 debugger, while keeping a responsive UI for the simulator front-end, than running the simulator front end and the simulator logic in separate instances of VS2010, if the simulation logic must be written in C and the simulation front end in managed code? For example, is there a way to tell the debugger that when a breakpoint is hit, some or all other threads should be allowed to keep running while the thread that had hit the breakpoint sits paused?
If the bulk of the simulation logic must be source-code compatible with an embedded system written in C (so that the same source files can be compiled and run for simulation purposes under VS2010, and then compiled by the embedded-systems compiler for use in real hardware), is there any way to have the VS2010 debugger interact with multiple simulated instances of the embedded device? Assume performance is not likely to be an issue, but the number of instances will be large enough that creating a separate project for each instance would be likely be annoying in the absence of any way to automate the process. I can think of three somewhat-workable approaches, but don't know how to make any of them work really nicely. There's also an approach which would be better if it's possible, but I don't know how to make it work.
Wrap all the simulation code within a single C++ class, such that what would be global variables in the target system become class members. I'm leaning toward this approach, but it would seem to require everything to be compiled as a single module, which would annoyingly affect the design of the target system code. Is there any nice way to have code access class instance members as though they were globals, without requiring all functions using such instances to be members of the same module?
Compile a separate DLL for each simulated instance (so that e.g. if I want to run up to 16 instances, I would include 16 DLL's in the project, all sharing the same source files). This could work, but every change to the project configuration would have to be repeated 16 times. Really ugly.
Compile the simulation logic to an EXE, and run an appropriate number of instances of that EXE. This could work, but I don't know of any convenient way to do things like set a breakpoint common to all instances. Is it possible to have multiple running instances of an EXE attached to a single debugger instance?
Load multiple instances of a DLL in such a way that each instance gets its own global variables, while still being accessible in the debugger. This would be nicest if it were possible, but I don't know any way to do so. Is it possible? How? I've never used AppDomains, but my intuition would suggest that might be useful here.
If I use one VS2010 instance for the front-end, and another for the simulation logic, is there any way to arrange things so that starting code in one will automatically launch the code in the other?
I'm not particularly committed to any single simulation approach; while it might be nice to know if there's some way of slightly improving the above, I'd also like to know of any other alternative approaches that could work even better.
I would think that you'd still have to run 16 copies of your main application code, but that your TCP-based I/O simulator could keep a different set of registers/state for each TCP connection that comes in.
Instead of a bunch of global variables, put them into a single structure that encompasses the I/O state of a single device. Either spawn off a new thread for each socket, or just keep a list of active sockets and dedicate a single instance of the state structure for each socket.
the simulators I have seen that handle multiple instances of the instruction set/processor are designed that way. There is a structure usually that contains a complete set of registers, and a new pointer or an array of these structures are used to multiply them into multiple instances of the processor.
From what experience I have programming whenever a program has a problem it crashes, whether it is from an unhanded exception or a piece of code that should have been checked for errors, but was not and threw one. What would cause a program to completely freeze a system to the point of requiring a restart.
Edit: Thanks for the answers. As for the language and OS this question was inspired by me playing Fallout and the game freezing twice in an hour causing me to have to restart the xbox, so I am guessing c++.
A million different things. The most common that come to mind are:
Spawning too many threads or processes, which drowns the OS scheduler.
Gobbling too much RAM, which puts the memory manager into page-fault hell.
In a Dotnet/Java type environment its quite difficult to seize a system up, because the Runtime keeps you code at a distance from the OS.
Closer to the metal say C or C++, Assembly etc you have to play fair with the rest of the system - If you dont have it already grab a copy of Petzold and observe/experiment yourself with the amount of 'boilerplate' code to get a single Window running...
Even closer, down at the driver level all sorts of things can happen...
There are number of reasons, being internal or external that leads to deadlocked application, more general case is when something is being asked for by a program but is not given that leads to infinite waiting, the practical example to this is, a program writes some text to a file, but when it is about to open a file for writing, same file is opened by any other application, so the requesting app will wait (freeze in some cases if not coded properly) until it gets exclusive control of the file.
And a critical freeze that leads to restarting the system is when the file which is asked for is something which very important for the OS. However, you may not need to restart the system in order to get it back to normal, unless the program which was frozen is written in a language that produces native binary, i.e. C/C++ to be precise. So if application is written in a language which works with the concept of managed code, like any .NET language, it will not need a system restart to get things back to normal.
page faults, trying to access inaccessible data or memory(acces violation), incompatible data types etc.
I'm new to VB6 but i'm currently in charge of maintaining a horror of editor like tool with plenty of forms, classes, modules and 3rd party tools all chunk together like the skin faces on that guy in the texas chainsaw massacre...
What i don't understand is why i get different results when i run the app in debugging mode, vs when i compiled it and run it on my devevelopment pc vs when i installed it on a different pc.
Yes i know i'm dumb, so please direct me to where i can find out more about this. I'm hoping to find out something like different linking, registry related etc connection that i'm simply not getting right now, i.e. something like wax on, wax off :P
The main pain in the neck is when i'm trying to debug some errors from my QA and i need to find a spare pc to test this on plus i can't directly debug because i don't know where the code is if i do it that manner.
Thanks.
i run the app in debugging mode vs when i compiled it and run it on my
devevelopment pc
When you compile you have the option of compiling to native code or pcode. The debugger runs using pcode only. Under rare circumstances when you compile to native code there will be a change in behavior. This particular is really rare. I used VB6 since it's release and I may get it once or twice a year. My application is a complex CAD/CAM creating shapes and running metal cutting machine and has two dozen DLLs. Not a typical situation. At home with my hobby software I never ran into this problem.
There are another class of errors that result from event sequencing problems. While VB6 isn't truly multi-tasking it has the ability to jump out of the current code block to process a event. If it re-enters the same block for the new event interesting things (to say the least) can result. I think this is the likely source of your problems as you software is an editor which is a highly interactive type of software.
In general the problem is fixed by reordering the effected areas. You find the effected area by inserting MsgBox or write to a text file to log where you are. I recommend logging to a text file as MsgBox tend to alter behavior that are timing or multi-tasking related.
Remember if a event fire while VB6 in the middle of a code block and there a DoEvents floating around then it will leave the code block process the event and return to the original code block. If it re-enters the same code block and you didn't mean for this to happen then you will have problems. And you will have different problems on different computers as the timing will be different for each.
The easiest way to deal with this type of issues is create some flag variables. In multi-tasking parlance they are known as semaphores or mutexes. WHen you enter a critical section of code, you set it true. When you leave the routine you set it to false. If it is already true when you enter that section of code you don't execute it.
when i installed it on a different pc.
These are usually the result of the wrong DLL installed. Most likely you have an older version while the target has a newer version. I would download the free Virtual PC and create a clean Window XP install to double check this.
If your problem is event timing this too can be different on different computers. This is found by logging (not MsgBox) suspect regions.
If you can display a screen shot or the text of your specific errors then I can help better.
The first thing to check would be the versions of all the dlls that your app depends on - including the service pack version of the VB6 dll.
Have you any more specific details about what's behaving differently?