How can I detect wireless debugging in android 10? Without using ADB Shell executor.
how to get the list of ADB devices connected to my laptop using android studio programmatically
I'm working in security and need to detect the devices connect to my laptop using ADB
Related
I use the VS-Code terminal to open metro using 'npx react-native start' and then connect my device through USB and install the app and run it using 'npx react-native run-android'. I then remove the USB cable because it is disconnecting and connecting constantly so I work through wi-fi, but sometimes the device disconnects from the dev-server and I cannot reconnect without using a USB cable again and repeating the steps above. I have set my ip and port in the dev menu in-app. Any tips would be greatly appreciated!
I have tried using adb reverse or adb connect commands, but to no avail.
When you connect your device by USB follow next commands
adb tcpip 5555
disconnect from usb
adb connect 192.168.1.35:5555 - your device local IP
adb devices check only one device connected by USB exists
I develop on my tablet using android studio.
The tablet is connected to the computer by wifi using
adb connect <ip_andress>:5555
My application contains listeners for USB devices attached/detached.
But unfourtunately, when I connect/disconnect usb device to/from the tablet, the adb connection is getting killed, and I can no longer see the device under "adb devices".
It is not a adb-connection-by-wifi what gets killed. It is just that USB enumerations affect the sys.usb.* system properties which on many devices is causing restart of adbd regardless whether it's being used over USB or tcpip.
Do grep "stop adbd" /init*rc to see what I mean.
You could either comment out those stop adbd lines or just disconnect the USB cable before running your adb connect command.
I was never able to connect my cellphone with my computar through wi-fi.
I had already given up. I followed all the instructions and tips, and nothing worked.
Finally, I did what no one said to do.
I've connected the phone to the WiFi network provided by the cable modem itself and not to some (not all) additional networks that are included in the router.
At home I use one of these networks, because I use a Deco Tp-Link router, which propagates the signal to my entire house, but this network is NOT compatible with ADB. It does not identify it as belonging to the same network.
After this, I use the normal procedure described here.
a) Connect cellphone with a USB cable
b) Find the IP_Phone depends on system in the cell phone. Here I use Settings, About Phone, Status and IP address.
c) Run the following adb commands in Command Prompt (Windows) or Terminal (Linux), where IP_Phone is the IP above mentioned. Normally adb.exe is an executable stored in computer path. adb is already included in Android Studio package.
adb tcpip 5555
adb connect IP_Phone
d) Now disconnect USB cable and it's ready. The cellphone model continues to appear in the status line in the top of Android Studio.
-/-
The best wifi is that defined in Cable Modem. It, unlike an any account defined in my router, answers to a ping command.
ping IP_Phone
Disconnect the usb cable just before running adb connect <*ip_address_of_your_phone*>
Our Projects(Code/Design,etc) in remote server,They have develop windows phone scenario,such as : visual studio 2012/2013,windows phone sdk installed etc..
i know debug app must be in vs2012/2013,
but,if i want to debug app on remote server and how can connect device ?
ps:
1、Use the same network.
2、All code in the remote server.
If you want to do it programmaticaly:
Microsoft has managed APIs that allow you to install and run XAPs on either hardware device or simulator. They are implemented in 3 DLLs: Microsoft.Smartdevice.Connectivity.dll, Microsoft.Smartdevice.Connectivity.Interface.dll and Microsoft.Smartdevice.MultiTargeting.Connectivity.dll - you should be able to google usage examples.
Unfortunately, there's no APIs for remote debugging.
If you want to do it manually:
You can use remote desktop + RemoteFX USB Redirection.
Or you can use specialized hardware, such as "Conversions Technology USB Extender Over IP" or "StarTech USB1000IP".
How can I connect an Asus Vivo RT to a laptop to test win 8 applications? When I plug in the wire nothing shows up for some reason :/
Or is there a way in which I can deploy an app onto the tablet to test it? I have so far installed the visual studio remote tools on the tablet but how can I transfer an application to test it?
You need to install a remote debugger on your RT device and connect to it (just need to be on the same wifi network).
The info you need is here: http://blogs.msdn.com/b/dsvc/archive/2012/10/26/windows-rt-windows-store-app-debugging.aspx
This is technical question to check the possibilities of the scenario. Is it possible to use Nokia phone's (Lumia, N9, symbain phone, S40) 3G data connection with a Android tablet pc?
Or any way to use phone's 3G data connection with tablet pc?
I have a unlimited data connection for my phone. But I don't use it that much. So I'm planning to use it with the tablet pc.
yep its possible easily if :
1. your tab is rooted
2. your tab supports usb host mode or otg mode (you could either check it on net or download usb host diagnostics) (just click start diagnostic)
procedure
Downoad ppp widget
configure your apn according to pc suite settings
then plug in your phone via usb on nokia pc suite mode
now wait 10s and click connect
you are now done
(pls switch your wifi off as ppp widget creates virual wifi for your tab)
any inquiries contsct rld0989#gmail.com (don't be rest less I only check my gmail once a day)
Yes, it's possible to use your phone as a modem, connected to the tablet via a USB cable, as long as you have
(1) an APN from your network operator to make a data connection via their network, and
(2) suitable device drivers for the phone. On Windows, smartphones are plug and play, but I don't have any experience using them with Android.
On the tablet, you also need some software to control the modem - something like the Mobile Broadband Connect 3.0 application listed on here
You can write a simple connection app yourself using the Android Telephony Manager.
Alternatively, you could connect manually, using AT commands with a suitable AT command program (in Windows, it would be Hyperterminal). This thread describes a possible equivalent for Android.
Standard AT commands to make a data connection are described in the 3gpp TS27.007 specification.
There are a lot of variations for different manufacturers, but making a simple connect should be possible using the standard commands.