The overall scenario: Actually trying to implement an order entry
system. A button on the main form opens 2nd form. In the 2nd form,
there are some combo-boxes and list-boxes from which the user selects
an item. Then pressing a button add that item with append query.
The problem is, as soon as I click anywhere in the 2nd (child) form;
the the id (autonumber) from parent vanishes(becomes null) for new
entry in the 2nd form. (I have lately discovered this vanishing by
using a text box to show current parent-id. Also found a solution,
posting as an answer)
I am trying to get two values from a textbox and a combo box. In the query datasheet view, i checked that, one value is received correctly but the other value it shows a very small box (putting picture below)
)
In this picture, "Expr2" field is showing small box. I used below statement to pull value from subform:
Expr2:[Forms]![customer_f]![products_add_subf].[Form]![customer_id]
And here is the code in sql-view:
INSERT INTO products_t ( product_name, customer_id )
SELECT [Forms]![customer_f]![products_add_subf].[Form]![item_combo] AS Expr1, [Forms]![customer_f]![products_add_subf].[Form]![customer_id] AS Expr2;
What this small box mean and how to avoid it ? How to pull correct value instead of small box ?
The solution will prevent vanishing of parent-id from first form(parent); in the 2nd form (child).
Just disable "Allow Addition" in the 2nd form's property.
Steps:
Open the 2nd form in "design view" . Double Click at the upper left corner of the form to open its property sheet. Goto "data" tab. In the "Allow Addition" select "no".
Now your append query will be able to grab the parent id field. It will not vanish !
Related
In access I am trying to get my total value to be equal to the sum of the all of the different values where the order number is the same.
My current code is as follows;
= SUM( Forms![OrderLine]![Total] ) Where( Forms![OrderLine]![OrderNo] = [OrderNo] )
This however gives me an error. How else would this be done?
Thanks
It sounds like you have an Order form and an OrderLine subform. Add a Form header/footer to your OrderLine form and put a text box in the footer. Put a SUM function in the Control Source of the footer text box to generate the aggregated value you need from the order line item rows.
On your main form, set the Control Source of the text box you want to display the order total equal to the name of the invisible text box in the subform. The control source on the main form text box will resemble SubformControlName.Form.AggregateTextBoxName.
You may need to play with the visibility settings of the header/footer, text box, form view mode, etc. to get the presentation you want, but this works even with the subform in datasheet view. The key is to get a text box somewhere on the subform to calculate the value you need on the parent form and then reference it inside the subform control from the parent form.
I have an Access Table named Count. It has one field named Anz and it has only 1 record. I want to Show this record in a TextBox on a form named overview. So in the design mode of the form inside the TextBox I use the code
[Count]![Anz]
but it Returns me #Name? error when I Switch back to form mode. Where am I going wrong?
You can use in Control Source of your unbound text box =Dlookup("[Anz]","[Count]")
Also you can bound your form to Count table and use for text box control source Anz
I have a continuous form which displays a small amount of data from each record in my table ProjectT (i.e. project name, status) and a command button in the footer which I would like to open the selected record in its expanded single form (where all of the relevant info is displayed).
At first I set this button up using Access's wizard, but realized that Access opens a selected record by filtering the data on the form. The problem with this is that once the expanded form is opened, I want a user to be able to move to other records without having to select to unfilter the results. If I change the button on my continuous form to simply open the expanded single form, is there code I can run to make the form open to the selected record without putting a filter on?
Initially I thought to set the expanded form's (named ProjectF) default value to Forms!ProjectListF!ProjectID (where ProjectListF is the continuous form and ProjectID is the autonumber primary key for ProjectT), but this was not successful, I think because there is more than one ProjectID displayed on ProjectListF.
Another thing to consider is that I have another button on my Main Menu form which opens the ProjectF form in data entry mode to prevent the user inadvertently changing/deleting an existing record when they are trying to add a new one; I have no idea if this might be important when trying to find a solution to my issue.
I'm open to any suggestion--I have an okay handle on SQL, and have delved into a little VBA but am completely self taught. Any ideas? Thanks!
You can open the detailed form with this command:
DoCmd.OpenForm "ProjectF", , , "[ProjectID] = " & Me!ProjectID.Value & ""
I have created a form and set the form's RecordSource to a query. Below is my query:
SELECT GeneralT.*, SalaryT.[Status]
FROM GeneralT INNER JOIN SalaryT ON GeneralT.Deposits = SalaryT.Deposits;
In the form I have 4 textboxes. In the first 3 textboxes I show value from GeneralT table and in fourth textbox I show SalaryT.[Status] value. But this fourth value doesn't show in the textbox rather it show #Name?.
If I open the query in datasheet view I can see all the value properly. I don't understand what is wrong here. Please help me to show the result properly in the form.
Displaying #Name? for a field says that field has a control source that does not match with the query linked to the form. Some things to check:
Make sure Status is a selection from one of the pre-existing options in the Control Source drop down combo box. Click on the combo box to make sure.
Double check to make sure it is a "Text Box" and not a custom
control.
Make sure there isn't another text box named Status
Try chaning the control source to just Status instead of SalaryT.[Status]. If the field name does not conflict with the naming of a field in GeneralT, the selected SalaryT.[Status] will actually be displayed named Status.
My question is twofold.
I have around twenty assorted tables in a database. The table layouts are diverse; the one common thread is that all of them have a 'County' field.
I need to set up a series of reports which allow a user to select a county from a drop-down box, triggering the report to run and return only records attached to that particular county.
This is doable at the datasheet level using a filter-by-form, but that's pretty clunky and I have several tables/queries which will need this same county filter.
I may be halfway there with the following:
Create an unbound form.
Add a combo box.
Set the Row Source of the combo box to include the County field.
Set its Bound column to 1.
Set its Column Count property to 2.
Set the Column Width property to 0";1"
Name the Combo Box 'ChooseCounty'.
Add a Command Button to the form.
Code the button's click event as follows:
(Note: To write the code, in Form Design View select the command button. Display the button's property sheet.
Click on the Event tab.
On the On Click line, write:
[Event Procedure]
Click on the little button with the 3 dots that appears on that line.
When the code window opens, the cursor will be flashing between two already existing lines of code.
Between those lines, write the following code.)
Me.Visible = False
Close the Code window.
Name this form 'ChooseCounty'.
In the Query that is the Report's Record Source [County] field
criteria line, write:
forms!ChooseCounty!ChooseCounty
Next, code the Report's Open event:
(Using the same method as described above)
DoCmd.OpenForm "ChooseCounty", , , , , acDialog
Code the report's Close event:
DoCmd.Close acForm, "ChooseCounty"
When ready to run the report, open the report.
The form will open and wait for the selection of the Company.
Click the command button and then report will run.
When the report closes, it will close the form.
I can persuade the report to trigger the form, but only once - I can't seem to figure out where precisely the 'forms!ChooseCounty!ChooseCounty' needs to go. Perhaps someone can clarify or offer a more elegant way to do this?
I need to set up a large meta-report containing sub-reports on all of the tables - and, using the same drop-down 'choose a county' form, I need to have that choice cascade down through all the subreports. I don't have the faintest idea how to go about this. Suggestions welcome!
~ T
You seem to be asking two questions, the last of which is clear to me, but the first is not. The second one is in regard to how to cascade the filter to the subforms. You can do this in one of two ways:
put the form control reference as criterion in the recordsource of each subreport, OR
create a non-visible control on the report that has as it's controlsource "=Forms!ChooseCounty!ChooseCounty". Name that control "CountyFilter". Then, add CountyFilter to the link properties. If, for instance, you are linking the subreports on ID, you'd have:
LinkMaster: ID;CountyFilter
LinkChild: ID;County
(assuming, of course, that ID is your link field for the child reports, and that "County" is the name of the field in the child subreport).
Now, I'm wondering why you would have the County data not just in the parent record but in the child records -- that makes no sense. If you do have it, then the solution above will work.
If you don't, then I don't understand the question, as the whole idea behind subreports is that they are filtered by the parent record, so if the parent record is a person, and you filter by COUNTY, you're only going to get the child records in the subreport for that person, which by definition are already filtered by COUNTY because the parent has been filtered.
As to the earlier question, you write:
I can persuade the report to trigger
the form, but only once - I can't seem
to figure out where precisely the
'forms!ChooseCounty!ChooseCounty'
needs to go
You have two choices:
hardwire the recordsource of the report to use the form control reference, so the WHERE clause of your report would be "WHERE County=Forms!ChooseCounty!ChooseCounty" (and you should set this as a parameter of type text to insure that it gets processed correctly).
the better meethod is to set the recordsource in the report's OnOpen event.
After you open the form as a dialog, you'd have something like this:
Me.Recordsource = "SELECT * FROM MyTable WHERE County='" _
& Forms!ChooseCounty!ChooseCounty & "'"
And immediately after that line, you can close the form, since it's not needed any longer.
You will likely want an OnNoData event for the case where no records are returned. This is usually something simple like:
MsgBox "No records found!"
DoCmd.Close acReport, Me.Name
I hope this answers your questions, but if not, I'm happy to offer more explanation.