I am trying to use Levenberg optimizer using the tfg.math.optimizer.levenberg_marquardt.minimize. I am following the installation instructions from https://www.tensorflow.org/graphics/install
On using: pip install --upgrade tensorflow-graphics, I get the following error:
ERROR: Failed building wheel for OpenEXR
Running setup.py clean for OpenEXR
Failed to build OpenEXR
Installing collected packages: OpenEXR, tensorflow-graphics
Running setup.py install for OpenEXR ... error
ERROR: Command errored out with exit status 1:
Could you please help me with this?
Thanks
I'm on Linux and I needed to install libopenexr-dev with apt:
sudo apt install libopenexr-dev
After this pip install tensorflow-graphics run without problems.
WARNING: Failed to write executable - trying to use .deleteme logic
ERROR: Could not install packages due to an EnvironmentError: [WinError 2] The system cannot find the file specified: 'c:\python38\Scripts\chardetect.exe' -> 'c:\python38\Scripts\chardetect.exe.deleteme'
I was trying to install Tensorflow via command pip install tensorflow. and after downloading everything at the end found this error..can anyone tell me why this happened?
According to https://www.codegrepper.com/ you can use these two:
In Windows
python -m pip install -U pip --user
In Linux
pip install -U pip --user
I want to use matplotlib.pyplot. I can't because
altoidnerd#LEPTON:~/ $ pip install matplotlib
is failing on ubuntu 14 giving an egg_info error, and warning "cannot build package freetype"
* The following required packages can not be built:
* freetype
----------------------------------------
Command "python setup.py egg_info" failed with error code 1 in /tmp/pip-build-8UvQcW/matplotlib
But
altoidnerd#LEPTON:~/$ dpkg -L libfreetype6
/.
/usr
/usr/lib
/usr/lib/x86_64-linux-gnu
/usr/lib/x86_64-linux-gnu/libfreetype.so.6.11.1
/usr/share
/usr/share/doc
/usr/share/doc/libfreetype6
/usr/share/doc/libfreetype6/FTL.TXT.gz
/usr/share/doc/libfreetype6/ft2faq.html
/usr/share/doc/libfreetype6/TODO
/usr/share/doc/libfreetype6/copyright
/usr/share/doc/libfreetype6/changelog.Debian.gz
/usr/share/doc/libfreetype6/pcf
/usr/share/doc/libfreetype6/pcf/README
/usr/lib/x86_64-linux-gnu/libfreetype.so.6
my debug.log is here: http://pastebin.com/rvDuYDiy
A discussion about this on github was closed last year, but I was unable to use it to solve the problem (I left a note):
https://github.com/matplotlib/matplotlib/issues/3029
I started a reddit thread too.
This did the trick for me:
sudo apt-get install libfreetype6-dev pkg-config
The following command mentioned in the github thread that you mentioned above works for me:
sudo ln -s /usr/include/freetype2/ft2build.h /usr/include/
I had a similar issue solved by:
easy_install -U pip
pip install matplotlib
When doing:
$ sudo pypy -m easy_install lxml
The response is:
Searching for lxml
[...snip...]
ERROR: /bin/sh: 1: xslt-config: not found
** make sure the development packages of libxml2 and libxslt are installed **
Using build configuration of libxslt
/usr/lib/pypy/lib-python/2.7/distutils/dist.py:267: UserWarning: Unknown distribution option: 'bugtrack_url'
warnings.warn(msg)
warning: no files found matching '*.txt' under directory 'src/lxml/tests'
src/lxml/lxml.etree.c:8:22: fatal error: pyconfig.h: No such file or directory
compilation terminated.
error: Setup script exited with error: command 'cc' failed with exit status 1
At the same time, sudo pip install lxml works fine.
What's going on?
Thanks.
sudo apt-get install python-dev fixed it for me on ubuntu 13.04
$yum install python-lxml or apt-get install python-lxml
this solved mine.
I've stumbled with this trouble a couple of times.
Short answer
Python2: $ python2.7 setup.py clean build --with-cython install
Python3: $ pip-3.3 install lxml
Long answer
The hypothesis is that pip install lxml should work in every environment, regardless if you are using Python2 or Python3.
There's also Cython to be considered: You will certainly enjoy lxml compiled with Cython due to relevant performance gains.
For reasons unknown to me, the compilation on Python2 does not find Cython.
To be more precise and absolutely explicit about this matter, both commands below DO NOT employ Cython:
# DO NOT use these commands. I repeat: DO NOT use these commands.
$ pip-2.7 install lxml
$ easy_install-2.7 install lxml
So, when using Python2 you have only one alternative, as far as I know, which is: compile from sources, Luke!
# install build environment and dependencies
$ kernel_release=$( uname -r )
$ sudo apt-get install linux-headers-${kernel_release} build-essential -y
$ sudo apt-get install libxml2-dev libxslt1-dev -y
# Download from github and compile from sources
$ git clone --branch lxml-3.2.4 https://github.com/lxml/lxml
$ python2.7 setup.py clean build --with-cython install
I've handled this problem by installed Ubuntu package pypy-dev.
I tried to install matplotlib on my MacBook Air, but it always gives me this error message:
Processing matplotlib-1.1.1_notests.tar.gz
Running matplotlib-1.1.1/setup.py -q bdist_egg --dist-dir /tmp/easy_install-3jFpXK/matplotlib-1.1.1/egg-dist-tmp-jC7QY3
basedirlist is: []
============================================================================
BUILDING MATPLOTLIB
matplotlib: 1.1.1
python: 2.7.2 (default, Jun 20 2012, 16:23:33) [GCC 4.2.1
Compatible Apple Clang 4.0
(tags/Apple/clang-418.0.60)]
platform: darwin
REQUIRED DEPENDENCIES
numpy: 1.6.1
freetype2: found, but unknown version (no pkg-config)
* WARNING: Could not find 'freetype2' headers in any
* of '.', './freetype2'.
OPTIONAL BACKEND DEPENDENCIES
libpng: found, but unknown version (no pkg-config)
* Could not find 'libpng' headers in any of '.'
Tkinter: Tkinter: version not identified, Tk: 8.5, Tcl: 8.5
Gtk+: no
* Building for Gtk+ requires pygtk; you must be able
* to "import gtk" in your build/install environment
Mac OS X native: yes
Qt: no
Qt4: no
PySide: no
Cairo: no
OPTIONAL DATE/TIMEZONE DEPENDENCIES
datetime: present, version unknown
dateutil: 1.5
pytz: matplotlib will provide
adding pytz
OPTIONAL USETEX DEPENDENCIES
dvipng: 1.14
ghostscript: 9.05
latex: 3.1415926
[Edit setup.cfg to suppress the above messages]
pymods ['pylab']
packages ['matplotlib', 'matplotlib.backends', 'matplotlib.backends.qt4_editor', 'matplotlib.projections', 'matplotlib.testing', 'matplotlib.testing.jpl_units', 'matplotlib.tests', 'mpl_toolkits', 'mpl_toolkits.mplot3d', 'mpl_toolkits.axes_grid', 'mpl_toolkits.axes_grid1', 'mpl_toolkits.axisartist', 'matplotlib.sphinxext', 'matplotlib.tri', 'matplotlib.delaunay', 'pytz']
warning: no files found matching 'KNOWN_BUGS'
warning: no files found matching 'INTERACTIVE'
warning: no files found matching 'MANIFEST'
warning: no files found matching '__init__.py'
warning: no files found matching 'examples/data/*'
warning: no files found matching 'lib/mpl_toolkits'
warning: no files found matching 'LICENSE*' under directory 'license'
clang: warning: argument unused during compilation: '-mno-fused-madd'
In file included from src/ft2font.cpp:3:
src/ft2font.h:16:10: fatal error: 'ft2build.h' file not found
**#include <ft2build.h>
^
1 error generated.
error: Setup script exited with error: command 'clang' failed with exit status 1**
I tried to install freetype and libpng using homebrew but it doesn't work. How can I get ft2build.h?
The following worked for matplotlib installation after installing python according to instructions from thegreenroom. Those instructions didn't work for me after I installed Python. I followed the instructions from Scipy.org to install numpy and scipy. Then I did (adapted from above answer):
brew install freetype
brew install libpng
However I got the same error message whether I installed with pip install matplotlib or trying to install from source, doing
python setup.py build
python setup.py install
in the matplotlib directory I cloned via git clone https://github.com/matplotlib/matplotlib.git.
The error persisted until I ran
brew link freetype
Then from the cloned matplotlib directory I ran
python setup.py build
python setup.py install
And the installation succeeded.
This may help folks looking for a non-homebrew solution.
My goal: use pip install to build matplotlib for a non-system python 2.7.3 build.
Using latest X-Code and X-Code command line tools as of Feb 2013, no matter what gymnastics I tried, I always received C++ ostream related template errors when compiling ft2build with gcc.
I was able to get a pip install to work with the following env vars:
export CC=clang
export CXX=clang++
export LDFLAGS="-L/usr/X11/lib"
export CFLAGS="-I/usr/X11/include -I/usr/X11/include/freetype2"
I simply forced clang and added my xquartz paths. No extra pkg-config or libpng builds, no sudo-ed symlinks.
I think the other answers are on the right track, but I encountered this same problem and can attest that:
brew install pkg-config
brew install freetype
pip install matplotlib
would yield the same result. Typically on an Ubuntu box my next response would have been
sudo apt-get install libfreetype-dev
or some variation of that to install the header. However, I could find no such homebrew package. Furthermore, I was able to locate the header file in question in a pretty normal location on my system:
zoidberg:~ matt$ locate ft2build.h
/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.7.sdk/usr/X11/include/ft2build.h
/usr/X11/include/ft2build.h
So I suspect there's either a problem with my system paths or with the homebrew packaged matplotlib. Since I'm lazy, I just tried installing the matplotlib package head from github:
pip install git+git://github.com/matplotlib/matplotlib.git#egg=matplotlib-dev
and it worked for me.
Here's the brew + pip recipe I used from a cold start. If you already have python and gfortran and such, jump in at the point where you need. The crucial steps appear to be brew install freetype and brew install libpng prior to doing pip install matplotlib
$ ruby -e "$(curl -fsSkL raw.github.com/mxcl/homebrew/go)"
$ brew doctor
$ brew install python
$ export PATH=/usr/local/bin:/usr/local/share/python:$PATH
$ easy_install pip
$ brew install gfortran
$ pip install numpy
$ pip install scipy
$ brew install pkg-config
$ brew install freetype
$ brew install libpng
$ pip install matplotlib
$ python
>>> import numpy
>>> import scipy
>>> import matplotlib
Note the 'no pkg-config' notices. You should have pkg-config on your search path, and it presumably needs to be the homebrew version so that it knows where the homebrew versions of the libraries are.
You need freetype:
brew install freetype
See the following:
http://comments.gmane.org/gmane.comp.python.matplotlib.general/31394
I also use mac air with OS X ver 10.8.2.
Using following commands can get rid of this failure:
brew install freetype
brew install libpng
pip install matplotlib
That's all. There may be some warning in the installing process, but that does not affect.
Use following python code to test:
import matplotlib.pyplot as plt
plt.plot([1,2,3,4])
plt.ylabel('some numbers')
plt.show()
which is referred from the url: http://matplotlib.org/users/pyplot_tutorial.html.
I have found installing these pacakges via homebrew to be the most reliable method
# if you haven't installed python via brew already:
brew install python
# sets up python as default python instead of system python
brew link python
# Add more brew formulae so we can install our py libs with brew
brew tap samueljohn/python
brew tap homebrew/science
# install numpy,scipy,matplotlib and dependencies ( gfortran, etc.. )
brew install numpy
brew install scipy
brew insatll matplotlib
I am using MacOs 10.8 too, and I encountered the same problem regarding not finding ft2build.h header when I tried to install matplotlib, what I l did to resolve the reported issue is :
1) replacing "ft2build.h" in the following call within the file "setupext.py" :
return self._check_for_pkg_config('freetype2',
'ft2build.h',
min_version='2.4',
version=version)
by the complete path to the ft2build.h header, in my case :
return self._check_for_pkg_config('freetype2',
'/usr/local/Cellar/freetype/2.5.2/include/freetype2/ft2build.h',
min_version='2.4',
version=version)
I think, but have not tested, that the problem is solved in an upstream commit of matplotlib. Here is my reasons why:
Discussion:
https://github.com/vbraun/sage/commit/5d17ca989eb58559af8f43b43e368c378c1bf6bb
Fix:
https://github.com/vbraun/sage/blob/5d17ca989eb58559af8f43b43e368c378c1bf6bb/build/pkgs/matplotlib/patches/pkg-config.patch
I fixed the problem with Cyris's answer thought.
I also had a similar issue, and fixed it in a reasonably straightforward way using homebrew.
You don't have to link the freetype libraries for this reason. The main problem is, after you install freetype using homebrew, you are told to add
-I/usr/local/opt/freetype/include
to your CPPFLAGS. However, this alone is not sufficient, and you also have to add the the freetype2 subfolder as well.
So in order to install matplotlib, do this:
brew install freetype
brew install libpng
LDFLAGS="-L/usr/local/opt/freetype/lib -L/usr/local/opt/libpng/lib" CPPFLAGS="-I/usr/local/opt/freetype/include -I/usr/local/opt/libpng/include -I/usr/local/opt/freetype/include/freetype2" pip install matplotlib