I'm a newbie with jMeter. I would to ask opinion and guide from forum to point me to right direction. I've have been tasked to do Load test on API Update Password. I have try several approach I can think off plus with the info from internet, but failed to have successful execution.
Below is my most successful approach but still failed after 3-5 minutes execution.
Test Plan
CSV Data Set Config - (Default setting, contain 500 member id's)
Thread Group (Setting: 100vu/100s, Loop: Infinite, Duration: 1 hour)
Counter1 (Old Password) example: abc001
Counter2 (New Password) example: abc002
Http Request (Get Token) {
Old Password
Member Id } --> Send token to next http request
Http Request (Update Password) {
Old Password
New Password
Confirm New Password }
The both Counter have increment of 1 and checked for Track counter independently for each user.
Based on my logic, it should be able to handle the execution as below.
Member1 (abc001,abc002) > Member1 (abc002,abc003) > Member1 (abc003,abc004) > etc
But in reality if failed. I also have try using JSR223 for counter, but still failed. Please help me by pointing me to correct direction how to execute this. I hope anyone can help! Thanks
In its current form your question doesn't make a lot of sense, it's unclear to me what is expected behaviour, what is the actual one, how exactly your test is failing and so on.
Try running it with Debug Sampler added so you would see the JMeter Variables with their respective values.
If it doesn't help - come up with a minimal test plan which shows the issue you're having using i.e. Dummy Sampler and indicate what's wrong and how it should behave according to your expectations.
Related
I want to make script using jmeter for performance testing of login page . The authorization type is code and code challenge method is sh256. How could I fetch code challenge code verifier and state or noance values daynamically.
The script is successfull for 1 single user but failing for multiple can any one help? Also I am using blazemeter to record script..
The process of "fetching" dynamic values is known as correlation and there is a lot of information on the topic in the Internet, i.e. How to Handle Correlation in JMeter
The main steps are:
Use a suitable JMeter Post-Processor to extract a dynamic value from the response into a JMeter Variable
Replace recorded hard-coded value with the JMeter Variable from the previous step
I run some load tests (all endpoints) and we do have a known issue in our code: if multiple POST requests are sent in the same time we do get a duplicate error based on a timestamp field in our database.
All I want to do is to count timeouts (based on the message received "Service is not available. Request timeout") in a variable and accept this as a normal behavior (don't fail the tests).
For now I've added a Response Assertion for this (in order to keep the tests running) but I cannot tell if or how many timeout actually happen.
How can I count this?
Thank you
I would recommend doing this as follows:
Add JSR223 Listener to your Test Plan
Put the following code into "Script" area:
if (prev.getResponseDataAsString().contains('Service is not available. Request timeout')) {
prev.setSampleLabel('False negative')
}
That's it, if sampler will contain Service is not available. Request timeout in the response body - JMeter will change its title to False negative.
You can even mark it as passed by adding prev.setSuccessful(false) line to your script. See Apache Groovy - Why and How You Should Use It article fore more information on what else you can do with Groovy in JMeter tests
If you just need to find out the count based on the response message then you can save the performance results in a csv file using simple data writer (configure for csv only) and then filter csv based on the response message to get the required count. Or you can use Display only "errors" option to get all the errors and then filter out based on the expected error message.
If you need to find out at the runtime then you can use aggregate report listener and use "Errors" checkbox to get the count of failure but this will include other failures also.
But, if you need to get the count at the run time to use it later then it is a different case. I am assuming that it is not the case.
Thanks,
using keystone LocalFile type to handle image uploads. similar to the Cloudinary autoCleanup option, I want to be able to delete the uploaded file itself, in addition to the corresponding mongo entry when deleting entries through the admin ui.
in this case, I want to delete an "Album", and it's corresponding album cover.
Album.schema.pre('remove', function(next){
var path = this._original.album_cover.path + "/" + this._original.album_cover.filename
fs.unlink(path, function () {
console.log('deleted');
})
I get "CSRF failure" when using the fs module. I thought all CSRF protection was handled internally with Keystone.
Anyone know of a better solution to this?
Took a 10 minute break and came back and it seems to be working now. I also found this, which seems to be the explanation.
"Moreover double check your session timeout. In my dev settings the session duration is set to 3 minutes. So, if I end up editing something for more than that time, Keystone will return a CSRF error on save because the new session (generate in the meantime) invalidates the old token."
https://github.com/keystonejs/keystone/issues/1330
I am getting the following exception whenever i try to fetch defects from rally:
com.google.gson.JsonSyntaxException:
com.google.gson.stream.MalformedJsonException: Use JsonReader.setLenient(true) to accept malformed JSON at line 1 column 12
at com.google.gson.JsonParser.parse(JsonParser.java:65)
at com.google.gson.JsonParser.parse(JsonParser.java:45)
at com.rallydev.rest.response.Response.<init>(Response.java:25)
at com.rallydev.rest.response.QueryResponse.<init>(QueryResponse.java:16)
at com.rallydev.rest.RallyRestApi.query(RallyRestApi.java:168)
at Test.main(Test.java:86)
Caused by: com.google.gson.stream.MalformedJsonException: Use JsonReader.setLenient(true) to accept malformed JSON at line 1 column 12
at com.google.gson.stream.JsonReader.syntaxError(JsonReader.java:1505)
at com.google.gson.stream.JsonReader.checkLenient(JsonReader.java:1386)
at com.google.gson.stream.JsonReader.doPeek(JsonReader.java:531)
at com.google.gson.stream.JsonReader.peek(JsonReader.java:414)
at com.google.gson.JsonParser.parse(JsonParser.java:60)
... 5
What intrigues me most is the code works perfectly fine on few machines and throws the above exception on few.
code snippet :
RallyRestApi restApi =
new RallyRestApi(new URI("http://rally1.rallydev.com"),apiKey);
QueryRequest queryRequest = new QueryRequest("defects");
queryRequest.setFetch(new Fetch("Project","FormattedID","Release"));
QueryFilter filter1 = new QueryFilter("FormattedID", "=", defetctID);
QueryResponse queryResponse1 = restApi.query(queryRequest);
Try a curl command to read the same defect using the same apiKey (in zsessionid header) on the same machine from which your java code fails.
curl --header "ZSESSIONID: _abc123" "https://rally1.rallydev.com/slm/webservice/v2.0/defect/123456789"
At least you will know if this is specific to java or not. Yes, it is strange that it fails on some machines and works on others, but the timing of those tests is not obvious from your post, and I wonder if this has anything to do with the underlying user credentials. (A user gets disabled for a period of time after a number of unsuccessful attempts). I am not positive that this is the issue you experience but I have seen when expired password caused the exact same error. API Keys are tied to a user, so when a user's password is expired, or when a user is inactivated (disabled) the same permissions(or the lack of them) is reflected in the key. For example, a user did not know that the password was expired because in the Rally UI they used SSO authentiation, but in the code they used either username/password or APIKey since the toolkit does not support SSO at this point. A 401 error would be more helpful, but instead a malformed JSON is generated.
I am new to jmeter and am working on putting together a test plan. The hurdle I've encountered is as follows:
First, a POST is made to processForm.aspx
Then, the user is redirected to pleaseWait.aspx
This page either redirects immediately to results.aspx OR loads, with a META REFRESH tag set to refresh in 5 seconds (and this step is repeated).
Now -- I can get this to execute by doing the following:
HTTP Sampler POST to processForm.aspx
Assert Response contains "<something on pleaseWait.aspx>"
While LAST
HTTP Sampler GET to pleaseWait.aspx
Assert Response contains "<something on results.aspx>"
However -- I don't care for this method, because it results in failed assertions (even though things are working as expected). I am sure there must be some other way to do this? Anyone more familiar with JMeter than I?
UPDATE:
Got it going by using Regular Expression Extractor instead of Assertions.
1) Add a User Defined Variables section at Test Plan Root
2) Add a variable to it "LoginWait" and "false"
HTTP Sampler POST to processForm.aspx
RegEx Extract Response Body contains "<something on pleaseWait.aspx>" into LoginWait
While ${LoginWait}
HTTP Sampler GET to pleaseWait.aspx
RegEx Extract Response Body contains "<something on pleaseWait.aspx>" into LoginWait
...
You could try using "follow redirects" on your HTTP Request. It would eliminate the logic you need, and still get you to the page you're going.