My current formula is:
=IF(COUNTIF('W/C 1/8/22'!B$47:C$53,""&$B12&""),"S1","-")
When dragging/autofilling I would like the next box to refer to columns 'D'&'E'(and then the following 'F'&'G') and so on, basically to skip along as I have merged two columns on the 'w/c' sheet.
D11 is the first box this formula will be in and hopefully will be able to drag
/autofill from there.
I have tried lots of different methods but can't seem to insert the correct formula to make it work. Any help would be most appreciated, thank you!
Related
Anyone,
I've chatted with and called excel customer service with no luck. I used the formula builder (please see attached screenshot) to make sure each element of the formula is correct and returns the value for the criteria I'm trying to reference.
Everything is accurate, but it returns a value of 0. When I do the same thing in the actual sheet the data is stored in (and click a criteria cell within the criteria range) it returns the accurate value?! I'm not sure why it won't work on the other sheet. The values I am using to select are dynamic and change with a drop down. I have another, advanced, workbook (I did not create) that does the same thing and completes an even more complicated formula, but actually works so I'm not sure why this is returning a 0 value.
Photos and code/syntax: Dynamic Selection, Example 2 of it working, Example 1 of it working, Formula Builder, CountIFs, Advanced Spreadsheet working, VLOOKUP
=SUMIFS('GFEBS Pull'!Q:Q,'GFEBS Pull'!G:G,FMCOP!$C$20,'GFEBS Pull'!H:H,FMCOP!B23)
or:
=SUMIFS('GFEBS Pull'!Q:Q,'GFEBS Pull'!G:G,'FMCOP'!$C$20,'GFEBS Pull'!H:H,'FMCOP'!B23)
When I type ' around FMCOP sheet name, they disappear? I've also tried to lock the columns on the 'GFEBS Pull' sheet with no luck. Cell B23 is not locked because I'm going to copy the formula down to reference other cells. Any help is appreciated!
In this screenshot you can clearly see that both FMCOP!C20 ansd FMCOP!B23 have prefacing spaces; e.g. " HHC".
Since " HHC" will never match "HHC", fix the data returned from 'the lower table in the same screenshot'.
A Text-to-Columns, Fixed Width, Finish should do this. You could adjust the original formula like,
=SUMIFS('GFEBS Pull'!Q:Q, 'GFEBS Pull'!G:G, TRIM(FMCOP!$C$20), 'GFEBS Pull'!H:H, TRIM(FMCOP!B23))
I would caution against the latter 'bandaid' fix. Fix the original data; do not apply bandaids on-the-fly.
I have very difficult scenario where i need to mention three comments by tow V lookup. let me explain you situation.
We are getting three sheets in workbook with values every weekly.
sheet1 range A1 to A5 value , lookup values sheet2 range A:B and lookup value sheet3 range A:B. yes i can able to put two V lookup , but problem is 3 comments i need to show in single output.
When i lookup values found in sheet2 need comment as "found value in sheet2" , if not it has to lookup sheet3 range if found then it has to give comment as "found value in sheet3" and if value not found need to give comment as " invalid data".
through vba can is it possible and three comments should be sheet1 in a single output based on values?
am looked in google i can use IFSA formula and apply formula but i cant provide three comments ...
For us its really hard every weekend , Please help me with VBA Code or Any formula at one shot for three comments ?
Really appreciate your help
You can actually have up to 7 Nested (IF) functions in Excel - Nested Formula Limit
You need to make sure that you properly close each function. This can be seen when editing the formula, it will highlight the opening/closing parentheses as you arrow through the formula.
If it tries to select a range while using the arrow keys, hit F2 to toggle between Edit/Enter modes.
I think you want this...
=IF(ISNA(VLOOKUP(A1,Sheet1!A1:B4,2,FALSE)),IF(ISNA(VLOOKUP(A1,Sheet2!A1:B4,2,FALSE)),IF(ISNA(VLOOKUP(A1,Sheet3!A1:B4,2,FALSE)),"Invalid Data", "Sheet 3"),"Sheet2"),"Sheet1")
Actually, on second thought, I assume you want whatever is in Column B
=IFNA(VLOOKUP(A1,Sheet1!A1:B4,2,FALSE),IFNA(VLOOKUP(A1,Sheet2!A1:B4,2,FALSE),IFNA(VLOOKUP(A1,Sheet3!A1:B4,2,FALSE),"Invalid Data")))
If I understand correctly, you need to determine if the first VLOOKUP is found, and if not, use the second VLOOKUP. Thats super simple. Assuming the formula Profex provided doesn't work:
=IF(IFERROR(VLOOKUP("A1", Sheet2!A1:B4, 2, False), "Err")="Err",IFERROR(VLOOKUP("A1", Sheet3!A1:B4, 2, False), "Not Found"), VLOOKUP("A1", Sheet2!A1:B4, 2, False))
I'm having a problem with my autofilter vba code where it's skipping the first column for some reason and taking field "4" as column E (the 5th column). This is extra odd because on some other files with the same exact setup, it doesn't do this, but for others it does. I can't put my finger on what the issue is (whether it's code or the actual spreadsheet). See the code below. Appreciate any help!
Workbooks(Num14).Sheets(1).Range("A:D").AutoFilter Field:=4, Criteria1:="REP"
I figured out the issue. I had to turn off autofiltermode first and then have the macro run the autofilter code. For some reason, the filter on the spreadsheet wasn't allowing for proper autofiltering. Hope this helps others!
I have got a timetable. I want to transpose data in rows to column (rather using formulas) in the way which is shown on this picture.
In first row (AU,KM,GK,MZ) are teachers, in second one are rooms.
In B23 cell is formula: "=INDIRECT(ADDRESS(COLUMN(Q2),ROW(Q2)))"
in B24 "=INDIRECT(ADDRESS(COLUMN(R2),ROW(R2)))",
in B25 "=INDIRECT(ADDRESS(COLUMN(Q3),ROW(Q3)))",
in B26"=INDIRECT(ADDRESS(COLUMN(R3),ROW(R3)))"
I want to fill monday column, but excell autofill is not working like i would like - next formulas are for example q5,r5,q7,r7,q9,r9 instead of simple increasing this way -> q1,r1,q2,r2,q3,r3,q4,r4,q5,r5 etc.
How to fix it? Any help will be appriciated.
In B13:
=IFERROR(INDEX($7:$7,MATCH(A13,$5:$5,0)),"")
In B14:
=IFERROR(INDEX($8:$8,MATCH(A13,$5:$5,0)),"")
Then copy and fill both down.
I've been using a conditional format formula =OR(B2=B1,B2=B3) to highlight consecutive duplicates. I then use format painter to copy the formula to all columns in my excel table.
I have set up a button that will, amongst other things, copy a workbook into a new workbook. I now want to include the above formula in this macro. My final objective is to replace all of the cells found with this formula with an asterisk (*).
I first tried to just pop the formula into the macro as a starting point -
For Each sh In Destwb.Worksheets
With sh.UsedRange.FormatConditions _
.Add(Type:=xlExpression, Formula1:="=OR(B2=B1,B2=B3)")
.Interior.Color = RGB(198, 239, 206)
End With
Next sh
But this just makes a mess of seemingly randomly highlighted cells. I'm not sure where I've gone wrong. Even column B highlights are all wrong. Could the header in B1 affect this? It doesn't when I use the CF normally. How can I expand the CF into all columns uniquely?
Finally, how do I go about working a replacement of formatted cells into this formula? Or is there a quicker/easier way to meet this end-goal?
I didn't realise I could add custom text in that way. That's moved me a good couple of steps forward.
Taking Balinti's suggestion into consideration I've tried a workaround. I was making a couple of assumptions that turned out to be wrong. I have been able to enter the CF into the Array of data that I have in my original workbook. It's not as simple as putting it into a table, but by manually selecting the range in each column and inputting the CF I have made it work.
I also wasn't sure if the formatting would carry through to the new worksheet as I have used the Paste Special command to convert the array formula to values in the new sheet. It does, however, carry the formatting across which is very handy.
It's not the perfect solution for me but it appears to be working so far. I still need to test what happens when I change the date and get updated data. It would still be interesting to know if I can move this formatting into my macro though. Any tips?