Don't know how to go about describing the details of my problem, but out of nowhere all of the useful code tools that I use for Java have partially stopped working. Go To Definition, Change All Occurences, and hover functionalities have all disappeared. I'm working on a remote machine through SSH, but I don't think that's the problem because another computer I'm working on works fine.
I've tried uninstalling and reinstalling every extension I have, I've tried quitting and restarting VSCode, I've tried deleting and reinstalling the application, all to no avail. I'm desperately in need of help with this problem
Finally figured it out -- I had to start the RedHat language server extension from a clean slate with the command Java: Clean Java Language Server Workspace
Related
I'm currently working on a nodejs project in an offline domain and came across this issue that I cant seem to find anything about.
Apparently even after installing the mssql package in visual studio code, intellisense only works when i have network.
if that helps, I installed the package from an online computer and then moved it to the offline computer, but the same problem shows even if i just unplug my computer and reopen vscode.
its also worth mentioning that packages like express and morgan does have intellisense even when offline.
Is there an option to also save the package's intellisense locally?
thanks!
mssql package: https://www.npmjs.com/package/mssql
So as it turns out, and even though I checked multiple times if it's network related or not, the problem were with some settings that I set up 2 years ago when I were coding with powershell.
Removing it worked, so always take a look at the vscode settings (suggestions/intellisense categories)
I have a radio button that is represented as a pbdatawindow, when I run setcelldata to pick an option it works fine on my laptop but fails on my colleagues laptop. If we try the run the command again on my colleagues laptop we get a fatal error from UFT.
The only difference between my UFT install and my colleagues is that my colleagues version is installed in French. Has anyone seen a similar issue?
PbWindow().PbDataWindow().SetCellData 1,1,""
Few things to try:
What version of uft are you using? - perhaps check for newer of see if there is a patch available?
Jump onto the microfocus knowledge base and see if there is anything around power builder.
You say the machines are the same but does that include every application too? In the past I've known that if you install applications after uft it can break its references. Try uninstalling and reinstalling uft. There is a repair option but uninstall/reinstall is normally more thorough.
Try and clear out all your temp and user settings.
In your user profile backup then remove all folders with mercury, hp, Hewlett-Packard and microfocus.
-The go to %temp% and clear evetything.
Try and pin down the problem - Has your colleague tried the English version or uft? - if that works, is it an option? (everyone use the same version)
If it doesn't work it suggests it's your colleague's machine as opposed to uft.
Is evetything such as the resolution and browser/application versions the same? Or simply try another French localised machine?
What's the fatal error? Does it provide any clues on why it failed?
Finally, You're paying a lot for commercial software. Don't suffer in silence :-)
Log a support call with microfocus. It's a bit long winded but Back in the day they used to be pretty good at helping. They'll ask you for logs and knowing how to get that is good to know.
There's more to try - let me know how you get on.
I have come across this particular problem several times across several versions of the IAR embedded workbench (EW430 5.40.7 [EW 6.0], EW430 5.51.2 [EW 6.4], EW430 6.20.1 [EW 7.0]), but each time only after a long period of having no problems. The problem doesn't seem to have affected the other firmware developers in the office, so no help can be offered there. I'm currently on Windows 10, but the problems first occurred when I was on Windows 8.1 (same PC.)
The problem is that, for no obvious trigger, the IAR ide will start to hang until terminated (or it will just crash on one of the EW versions) on any attempt to change the active build configuration in MSP430 projects using the emulator.
From my testing, it appears to be directly related to something the IDE is doing with the emulator, as when the build configuration is changed, I can see the emulator menu in the menu bar disappear, then the hang happens. Under normal circumstances, the menu will disappear, but then reappear once the other debug configuration is completely loaded.
I have tried the default project "flashing the LED" to see if it was only my project - but if I select the msp430x4xx (C) - Debug, right click it and select "Set as Active" from the context menu, to make this the active project, the IDE also hung. I then reopened the EW IDE, and opened the LED flashing project again. The original 1xx asm project was the active project.
I then changed the settings of the 4xx (C) Debug project (without making it the active project) from the emulator to the simulator, and clicked OK. The program did NOT crash.
I then set the 4xx (C) Debug project as the active project and it did NOT crash. The simulator even runs without problems.
The version of the FET firmware didn't change from when the IDE worked correctly to when it didn't, and the FET is not even used at this point. It can be completely disconnected and the same results will occur.
I have tried the following, without success:
erasing the files in my project folder's settings subfolder
erasing the *.dep files in the project folder.
deleting the IarIdePm.ini file from AppData\Roaming\IAR Embedded Workbench
making sure none of the project files are read-only
reinstalling the program to the same location
removing and reinstalling the program to the same location.
What does solve the problem (until it reoccurs) is to reinstall the program, but to a different directory (for e.g., the default directory will be in program files (x86)\IAR Systems\Embedded Workbench x.x. Installing again into program files (x86)\IAR Systems\EWx (just so it is different) allowed that installation to work, but the old installation continued to fail.
Best advice so far (from our support person) has been to do the above, install to another directory and live with it, as it doesn't happen often.
Since it has happened to me on 3 occasions with 3 different versions of the program, I would like to know how to fix or prevent it! If anyone could offer anything to try (or even better, a straight solution :)) that would be greatly appreciated!
Cheers!
Since newer versions and updates on W10, it seems that old compatibilities are being removed from this OS. I have no direct solution for this problem since Microsoft does not promise support for old software and hardware. Even I tried to find a solution for that problem, and I found on the IAR website a list of IDE's and their compatible versions. (remember, old versions are not compatible)
( https://www.iar.com/knowledge/support/technical-notes/ide/windows-10-and-iar-embedded-workbench/ )
You will need to update your IDE and program version to a newer version if you plan to continue to use this IDE natively on Windows 10 or you may use Virtual machines with an old operational system (like Windows 7) to compile your program on old IDE.
P.S.1 I manually uninstalled KB4592449 recently updated and the program return to work natively. Probably it will continue working until this update (or other similar) being installed again on the computer, but probably there is any vulnerability that the computer will be exposed to, and in this case, I'm paying the price.
P.S.2 KB4580325 promotes the same behavior in IAR 5.11 on windows 10. Both KB's implement securities about the flash player - that I Don't use - then, I can securely uninstall it.
P.S.3 Since I updated my windows up to Windows 10 version 21H1 (compilation 19043.1165) AND I configured Windows defender to not be monitoring IAR IDE (IarIdePM.exe) disabling all protections available, everything works fine. But Remember: my program is original, not cracked or altered by anything, then I am secure to do what I did.
It is a 'natural' that software problem. Not found way of fixing it. The solution temporary is modify manually the file .eww for change of project active. The ultimate solution is to use another development environment.
I'm following the instructions here but it seems not to work. I'll contact the developer, but wonder if someone has been able to make it work somehow.
The installation process is completed, but Netbeans doesn't see the plug-in. I assume it is deployed incorrectly.
Not sure how it got fixed but suddenly upon starting the IDE an update for the plugin showed up and it started working afterwards.
I have a VB.NET ClickOnce application that I am trying to install on my computer. Previously, I was able to install and run these apps without issue. Now when I install the application, I can see the flash of a window opening, and then nothing. (There are also no processes left hanging or anything when viewed with the task manager.)
After some digging around I noticed that there are files in my Temporary Internet Files with names like "FusionBindError" and then my application name and different DLL names.
I have done everything I can find on the net to do, reinstall applications, reinstalled the .NET Framework, deleted my Local Settings folder and relogged in.
Does anyone out there have any other ideas for me to try?
I tried the Mage.exe suggestion, but it failed to help. Same with the other installation location suggestion. The application flashes at the bottom of the screen but does not open. I have tried using FUSLOGVW to check the bindings and nothing shows up in there. (Good or bad, there are no binding entries.)
Have you tried using mage.exe? This is a command-line tool that comes with .NET framework. Start up a VS command prompt, and try mage -cc. This will clear your applicaiton cache and will force a new click-once download. This is the first thing I do when my click-once applications fail and it works 99% of the time.
A couple of suggestions:
FusLogVW isn't working for you because you have to enable assembly binding failure logging inside the registry. This MSDN article describes how to do this.
Another thing that comes to mind is, perhaps the ClickOnce app install, or perhaps the whole ClickOnce store is corrupted. Try deleting the ClickOnce app store then reinstalling the application.
It's possible that new prerequisites were added that you don't have on hand. If the URL you are using points directly to "my.application" or whatever your equivalent is, prerequisites won't be processed.
So try pointing to the setup.exe that is created in the same directory as the .application file.
Other than that, it sounds like you're doing all the right stuff...
Also, it could be useful to run the fuslogvw utility on a machine where the application actually works. Or reflector.
And then see if indeed any of its dependencies being loaded surprise you.
Also, for these types of errors, be sure to check if disabling the antivirus resident protection helps. Sometimes it causes problems accessing assemblies' manifests and such.
I uninstalled my Kensington Mouse software, and that resolved my installation errors.
Who knew that mouse software that I never used could cause so much trouble??
Sometimes if your machine is working for days this problem will show up. Try to restart your machine. The same problem happened to me and it disappeared when I restarted my machine.