The count is 4 at the end of the code below. I expected 0. Why is it 4? How can I get 0?
var count = 0;
"hello".forEach {
if(it == 'h')
{
println("Exiting the forEach loop. Count is $count");
return#forEach;
}
count++;
}
println("count is $count");
Output:
Exiting the forEach loop. Count is 0
count is 4
return#forEach does not exit forEach() itself, but the lambda passed to it ("body" of forEach()). Note that this lambda is executed several times - once per each item. By returning from it you actually skip only a single item, so this is similar to continue, not to break.
To workaround this you can create a label in the outer scope and return to it:
var count = 0;
run loop# {
"hello".forEach {
if(it == 'h')
{
println("Exiting the forEach loop. Count is $count");
return#loop;
}
count++;
}
}
This is described here: https://kotlinlang.org/docs/returns.html#return-at-labels
Note that the use of local returns in previous three examples is similar to the use of continue in regular loops. There is no direct equivalent for break, but it can be simulated by adding another nesting lambda and non-locally returning from it
It is 4 because the forEach call the lambda passed to it for each character in the string, so the return#forEach in your code return for the first element. You can use a for loop and use break to obtain 0.
return#forEach returns from the lambda function. But the forEach function is a higher-order function that calls the lambda repeatedly for each item in the iterator. So when you return from the lambda, you are only returning for that single item in the iterator. It is analogous to using continue in a traditional for loop.
If you want to exit iteration in a higher-order function completely, you have to use labels. And as I type this, I see another answer already shows how to do that, but I'll leave this in case the different explanation helps.
If your objective is to count the number of characters before 'h', you could do something like this:
val numCharsBeforeH = "hello".takeWhile { it != 'h' }.length
From your comment to Tenfour04's answer:
This is not very convenient. Why didn't the makers of Kotlin create a "break" equivalent?
Here is a quote of the "Loops" section of the Coding conventions:
Prefer using higher-order functions (filter, map etc.) to loops.
Exception: forEach (prefer using a regular for loop instead, unless
the receiver of forEach is nullable or forEach is used as part of a
longer call chain).
When making a choice between a complex expression using multiple
higher-order functions and a loop, understand the cost of the
operations being performed in each case and keep performance
considerations in mind.
Indeed, using a regular for loop with break does what you expect:
var count = 0;
for (char in "hello") {
if (char == 'h') {
println("Breaking the loop. Count is $count")
break
}
count++
}
println("count is $count")
Output:
Breaking the loop. Count is 0
count is 0
Except for very simple operations, there are probably better ways to do what you need than using forEach.
When normally using a for-in-loop, the counter (in this case number) is a constant in each iteration:
for number in 1...10 {
// do something
}
This means I cannot change number in the loop:
for number in 1...10 {
if number == 5 {
++number
}
}
// doesn't compile, since the prefix operator '++' can't be performed on the constant 'number'
Is there a way to declare number as a variable, without declaring it before the loop, or using a normal for-loop (with initialization, condition and increment)?
To understand why i can’t be mutable involves knowing what for…in is shorthand for. for i in 0..<10 is expanded by the compiler to the following:
var g = (0..<10).generate()
while let i = g.next() {
// use i
}
Every time around the loop, i is a freshly declared variable, the value of unwrapping the next result from calling next on the generator.
Now, that while can be written like this:
while var i = g.next() {
// here you _can_ increment i:
if i == 5 { ++i }
}
but of course, it wouldn’t help – g.next() is still going to generate a 5 next time around the loop. The increment in the body was pointless.
Presumably for this reason, for…in doesn’t support the same var syntax for declaring it’s loop counter – it would be very confusing if you didn’t realize how it worked.
(unlike with where, where you can see what is going on – the var functionality is occasionally useful, similarly to how func f(var i) can be).
If what you want is to skip certain iterations of the loop, your better bet (without resorting to C-style for or while) is to use a generator that skips the relevant values:
// iterate over every other integer
for i in 0.stride(to: 10, by: 2) { print(i) }
// skip a specific number
for i in (0..<10).filter({ $0 != 5 }) { print(i) }
let a = ["one","two","three","four"]
// ok so this one’s a bit convoluted...
let everyOther = a.enumerate().filter { $0.0 % 2 == 0 }.map { $0.1 }.lazy
for s in everyOther {
print(s)
}
The answer is "no", and that's a good thing. Otherwise, a grossly confusing behavior like this would be possible:
for number in 1...10 {
if number == 5 {
// This does not work
number = 5000
}
println(number)
}
Imagine the confusion of someone looking at the number 5000 in the output of a loop that is supposedly bound to a range of 1 though 10, inclusive.
Moreover, what would Swift pick as the next value of 5000? Should it stop? Should it continue to the next number in the range before the assignment? Should it throw an exception on out-of-range assignment? All three choices have some validity to them, so there is no clear winner.
To avoid situations like that, Swift designers made loop variables in range loops immutable.
Update Swift 5
for var i in 0...10 {
print(i)
i+=1
}
This morning, I was reading Steve Yegge's: When Polymorphism Fails, when I came across a question that a co-worker of his used to ask potential employees when they came for their interview at Amazon.
As an example of polymorphism in
action, let's look at the classic
"eval" interview question, which (as
far as I know) was brought to Amazon
by Ron Braunstein. The question is
quite a rich one, as it manages to
probe a wide variety of important
skills: OOP design, recursion, binary
trees, polymorphism and runtime
typing, general coding skills, and (if
you want to make it extra hard)
parsing theory.
At some point, the candidate hopefully
realizes that you can represent an
arithmetic expression as a binary
tree, assuming you're only using
binary operators such as "+", "-",
"*", "/". The leaf nodes are all
numbers, and the internal nodes are
all operators. Evaluating the
expression means walking the tree. If
the candidate doesn't realize this,
you can gently lead them to it, or if
necessary, just tell them.
Even if you tell them, it's still an
interesting problem.
The first half of the question, which
some people (whose names I will
protect to my dying breath, but their
initials are Willie Lewis) feel is a
Job Requirement If You Want To Call
Yourself A Developer And Work At
Amazon, is actually kinda hard. The
question is: how do you go from an
arithmetic expression (e.g. in a
string) such as "2 + (2)" to an
expression tree. We may have an ADJ
challenge on this question at some
point.
The second half is: let's say this is
a 2-person project, and your partner,
who we'll call "Willie", is
responsible for transforming the
string expression into a tree. You get
the easy part: you need to decide what
classes Willie is to construct the
tree with. You can do it in any
language, but make sure you pick one,
or Willie will hand you assembly
language. If he's feeling ornery, it
will be for a processor that is no
longer manufactured in production.
You'd be amazed at how many candidates
boff this one.
I won't give away the answer, but a
Standard Bad Solution involves the use
of a switch or case statment (or just
good old-fashioned cascaded-ifs). A
Slightly Better Solution involves
using a table of function pointers,
and the Probably Best Solution
involves using polymorphism. I
encourage you to work through it
sometime. Fun stuff!
So, let's try to tackle the problem all three ways. How do you go from an arithmetic expression (e.g. in a string) such as "2 + (2)" to an expression tree using cascaded-if's, a table of function pointers, and/or polymorphism?
Feel free to tackle one, two, or all three.
[update: title modified to better match what most of the answers have been.]
Polymorphic Tree Walking, Python version
#!/usr/bin/python
class Node:
"""base class, you should not process one of these"""
def process(self):
raise('you should not be processing a node')
class BinaryNode(Node):
"""base class for binary nodes"""
def __init__(self, _left, _right):
self.left = _left
self.right = _right
def process(self):
raise('you should not be processing a binarynode')
class Plus(BinaryNode):
def process(self):
return self.left.process() + self.right.process()
class Minus(BinaryNode):
def process(self):
return self.left.process() - self.right.process()
class Mul(BinaryNode):
def process(self):
return self.left.process() * self.right.process()
class Div(BinaryNode):
def process(self):
return self.left.process() / self.right.process()
class Num(Node):
def __init__(self, _value):
self.value = _value
def process(self):
return self.value
def demo(n):
print n.process()
demo(Num(2)) # 2
demo(Plus(Num(2),Num(5))) # 2 + 3
demo(Plus(Mul(Num(2),Num(3)),Div(Num(10),Num(5)))) # (2 * 3) + (10 / 2)
The tests are just building up the binary trees by using constructors.
program structure:
abstract base class: Node
all Nodes inherit from this class
abstract base class: BinaryNode
all binary operators inherit from this class
process method does the work of evaluting the expression and returning the result
binary operator classes: Plus,Minus,Mul,Div
two child nodes, one each for left side and right side subexpressions
number class: Num
holds a leaf-node numeric value, e.g. 17 or 42
The problem, I think, is that we need to parse perentheses, and yet they are not a binary operator? Should we take (2) as a single token, that evaluates to 2?
The parens don't need to show up in the expression tree, but they do affect its shape. E.g., the tree for (1+2)+3 is different from 1+(2+3):
+
/ \
+ 3
/ \
1 2
versus
+
/ \
1 +
/ \
2 3
The parentheses are a "hint" to the parser (e.g., per superjoe30, to "recursively descend")
This gets into parsing/compiler theory, which is kind of a rabbit hole... The Dragon Book is the standard text for compiler construction, and takes this to extremes. In this particular case, you want to construct a context-free grammar for basic arithmetic, then use that grammar to parse out an abstract syntax tree. You can then iterate over the tree, reducing it from the bottom up (it's at this point you'd apply the polymorphism/function pointers/switch statement to reduce the tree).
I've found these notes to be incredibly helpful in compiler and parsing theory.
Representing the Nodes
If we want to include parentheses, we need 5 kinds of nodes:
the binary nodes: Add Minus Mul Divthese have two children, a left and right side
+
/ \
node node
a node to hold a value: Valno children nodes, just a numeric value
a node to keep track of the parens: Parena single child node for the subexpression
( )
|
node
For a polymorphic solution, we need to have this kind of class relationship:
Node
BinaryNode : inherit from Node
Plus : inherit from Binary Node
Minus : inherit from Binary Node
Mul : inherit from Binary Node
Div : inherit from Binary Node
Value : inherit from Node
Paren : inherit from node
There is a virtual function for all nodes called eval(). If you call that function, it will return the value of that subexpression.
String Tokenizer + LL(1) Parser will give you an expression tree... the polymorphism way might involve an abstract Arithmetic class with an "evaluate(a,b)" function, which is overridden for each of the operators involved (Addition, Subtraction etc) to return the appropriate value, and the tree contains Integers and Arithmetic operators, which can be evaluated by a post(?)-order traversal of the tree.
I won't give away the answer, but a
Standard Bad Solution involves the use
of a switch or case statment (or just
good old-fashioned cascaded-ifs). A
Slightly Better Solution involves
using a table of function pointers,
and the Probably Best Solution
involves using polymorphism.
The last twenty years of evolution in interpreters can be seen as going the other way - polymorphism (eg naive Smalltalk metacircular interpreters) to function pointers (naive lisp implementations, threaded code, C++) to switch (naive byte code interpreters), and then onwards to JITs and so on - which either require very big classes, or (in singly polymorphic languages) double-dispatch, which reduces the polymorphism to a type-case, and you're back at stage one. What definition of 'best' is in use here?
For simple stuff a polymorphic solution is OK - here's one I made earlier, but either stack and bytecode/switch or exploiting the runtime's compiler is usually better if you're, say, plotting a function with a few thousand data points.
Hm... I don't think you can write a top-down parser for this without backtracking, so it has to be some sort of a shift-reduce parser. LR(1) or even LALR will of course work just fine with the following (ad-hoc) language definition:
Start -> E1
E1 -> E1+E1 | E1-E1
E1 -> E2*E2 | E2/E2 | E2
E2 -> number | (E1)
Separating it out into E1 and E2 is necessary to maintain the precedence of * and / over + and -.
But this is how I would do it if I had to write the parser by hand:
Two stacks, one storing nodes of the tree as operands and one storing operators
Read the input left to right, make leaf nodes of the numbers and push them into the operand stack.
If you have >= 2 operands on the stack, pop 2, combine them with the topmost operator in the operator stack and push this structure back to the operand tree, unless
The next operator has higher precedence that the one currently on top of the stack.
This leaves us the problem of handling brackets. One elegant (I thought) solution is to store the precedence of each operator as a number in a variable. So initially,
int plus, minus = 1;
int mul, div = 2;
Now every time you see a a left bracket increment all these variables by 2, and every time you see a right bracket, decrement all the variables by 2.
This will ensure that the + in 3*(4+5) has higher precedence than the *, and 3*4 will not be pushed onto the stack. Instead it will wait for 5, push 4+5, then push 3*(4+5).
Re: Justin
I think the tree would look something like this:
+
/ \
2 ( )
|
2
Basically, you'd have an "eval" node, that just evaluates the tree below it. That would then be optimized out to just being:
+
/ \
2 2
In this case the parens aren't required and don't add anything. They don't add anything logically, so they'd just go away.
I think the question is about how to write a parser, not the evaluator. Or rather, how to create the expression tree from a string.
Case statements that return a base class don't exactly count.
The basic structure of a "polymorphic" solution (which is another way of saying, I don't care what you build this with, I just want to extend it with rewriting the least amount of code possible) is deserializing an object hierarchy from a stream with a (dynamic) set of known types.
The crux of the implementation of the polymorphic solution is to have a way to create an expression object from a pattern matcher, likely recursive. I.e., map a BNF or similar syntax to an object factory.
Or maybe this is the real question:
how can you represent (2) as a BST?
That is the part that is tripping me
up.
Recursion.
#Justin:
Look at my note on representing the nodes. If you use that scheme, then
2 + (2)
can be represented as
.
/ \
2 ( )
|
2
should use a functional language imo. Trees are harder to represent and manipulate in OO languages.
As people have been mentioning previously, when you use expression trees parens are not necessary. The order of operations becomes trivial and obvious when you're looking at an expression tree. The parens are hints to the parser.
While the accepted answer is the solution to one half of the problem, the other half - actually parsing the expression - is still unsolved. Typically, these sorts of problems can be solved using a recursive descent parser. Writing such a parser is often a fun exercise, but most modern tools for language parsing will abstract that away for you.
The parser is also significantly harder if you allow floating point numbers in your string. I had to create a DFA to accept floating point numbers in C -- it was a very painstaking and detailed task. Remember, valid floating points include: 10, 10., 10.123, 9.876e-5, 1.0f, .025, etc. I assume some dispensation from this (in favor of simplicty and brevity) was made in the interview.
I've written such a parser with some basic techniques like
Infix -> RPN and
Shunting Yard and
Tree Traversals.
Here is the implementation I've came up with.
It's written in C++ and compiles on both Linux and Windows.
Any suggestions/questions are welcomed.
So, let's try to tackle the problem all three ways. How do you go from an arithmetic expression (e.g. in a string) such as "2 + (2)" to an expression tree using cascaded-if's, a table of function pointers, and/or polymorphism?
This is interesting,but I don't think this belongs to the realm of object-oriented programming...I think it has more to do with parsing techniques.
I've kind of chucked this c# console app together as a bit of a proof of concept. Have a feeling it could be a lot better (that switch statement in GetNode is kind of clunky (it's there coz I hit a blank trying to map a class name to an operator)). Any suggestions on how it could be improved very welcome.
using System;
class Program
{
static void Main(string[] args)
{
string expression = "(((3.5 * 4.5) / (1 + 2)) + 5)";
Console.WriteLine(string.Format("{0} = {1}", expression, new Expression.ExpressionTree(expression).Value));
Console.WriteLine("\nShow's over folks, press a key to exit");
Console.ReadKey(false);
}
}
namespace Expression
{
// -------------------------------------------------------
abstract class NodeBase
{
public abstract double Value { get; }
}
// -------------------------------------------------------
class ValueNode : NodeBase
{
public ValueNode(double value)
{
_double = value;
}
private double _double;
public override double Value
{
get
{
return _double;
}
}
}
// -------------------------------------------------------
abstract class ExpressionNodeBase : NodeBase
{
protected NodeBase GetNode(string expression)
{
// Remove parenthesis
expression = RemoveParenthesis(expression);
// Is expression just a number?
double value = 0;
if (double.TryParse(expression, out value))
{
return new ValueNode(value);
}
else
{
int pos = ParseExpression(expression);
if (pos > 0)
{
string leftExpression = expression.Substring(0, pos - 1).Trim();
string rightExpression = expression.Substring(pos).Trim();
switch (expression.Substring(pos - 1, 1))
{
case "+":
return new Add(leftExpression, rightExpression);
case "-":
return new Subtract(leftExpression, rightExpression);
case "*":
return new Multiply(leftExpression, rightExpression);
case "/":
return new Divide(leftExpression, rightExpression);
default:
throw new Exception("Unknown operator");
}
}
else
{
throw new Exception("Unable to parse expression");
}
}
}
private string RemoveParenthesis(string expression)
{
if (expression.Contains("("))
{
expression = expression.Trim();
int level = 0;
int pos = 0;
foreach (char token in expression.ToCharArray())
{
pos++;
switch (token)
{
case '(':
level++;
break;
case ')':
level--;
break;
}
if (level == 0)
{
break;
}
}
if (level == 0 && pos == expression.Length)
{
expression = expression.Substring(1, expression.Length - 2);
expression = RemoveParenthesis(expression);
}
}
return expression;
}
private int ParseExpression(string expression)
{
int winningLevel = 0;
byte winningTokenWeight = 0;
int winningPos = 0;
int level = 0;
int pos = 0;
foreach (char token in expression.ToCharArray())
{
pos++;
switch (token)
{
case '(':
level++;
break;
case ')':
level--;
break;
}
if (level <= winningLevel)
{
if (OperatorWeight(token) > winningTokenWeight)
{
winningLevel = level;
winningTokenWeight = OperatorWeight(token);
winningPos = pos;
}
}
}
return winningPos;
}
private byte OperatorWeight(char value)
{
switch (value)
{
case '+':
case '-':
return 3;
case '*':
return 2;
case '/':
return 1;
default:
return 0;
}
}
}
// -------------------------------------------------------
class ExpressionTree : ExpressionNodeBase
{
protected NodeBase _rootNode;
public ExpressionTree(string expression)
{
_rootNode = GetNode(expression);
}
public override double Value
{
get
{
return _rootNode.Value;
}
}
}
// -------------------------------------------------------
abstract class OperatorNodeBase : ExpressionNodeBase
{
protected NodeBase _leftNode;
protected NodeBase _rightNode;
public OperatorNodeBase(string leftExpression, string rightExpression)
{
_leftNode = GetNode(leftExpression);
_rightNode = GetNode(rightExpression);
}
}
// -------------------------------------------------------
class Add : OperatorNodeBase
{
public Add(string leftExpression, string rightExpression)
: base(leftExpression, rightExpression)
{
}
public override double Value
{
get
{
return _leftNode.Value + _rightNode.Value;
}
}
}
// -------------------------------------------------------
class Subtract : OperatorNodeBase
{
public Subtract(string leftExpression, string rightExpression)
: base(leftExpression, rightExpression)
{
}
public override double Value
{
get
{
return _leftNode.Value - _rightNode.Value;
}
}
}
// -------------------------------------------------------
class Divide : OperatorNodeBase
{
public Divide(string leftExpression, string rightExpression)
: base(leftExpression, rightExpression)
{
}
public override double Value
{
get
{
return _leftNode.Value / _rightNode.Value;
}
}
}
// -------------------------------------------------------
class Multiply : OperatorNodeBase
{
public Multiply(string leftExpression, string rightExpression)
: base(leftExpression, rightExpression)
{
}
public override double Value
{
get
{
return _leftNode.Value * _rightNode.Value;
}
}
}
}
Ok, here is my naive implementation. Sorry, I did not feel to use objects for that one but it is easy to convert. I feel a bit like evil Willy (from Steve's story).
#!/usr/bin/env python
#tree structure [left argument, operator, right argument, priority level]
tree_root = [None, None, None, None]
#count of parethesis nesting
parenthesis_level = 0
#current node with empty right argument
current_node = tree_root
#indices in tree_root nodes Left, Operator, Right, PRiority
L, O, R, PR = 0, 1, 2, 3
#functions that realise operators
def sum(a, b):
return a + b
def diff(a, b):
return a - b
def mul(a, b):
return a * b
def div(a, b):
return a / b
#tree evaluator
def process_node(n):
try:
len(n)
except TypeError:
return n
left = process_node(n[L])
right = process_node(n[R])
return n[O](left, right)
#mapping operators to relevant functions
o2f = {'+': sum, '-': diff, '*': mul, '/': div, '(': None, ')': None}
#converts token to a node in tree
def convert_token(t):
global current_node, tree_root, parenthesis_level
if t == '(':
parenthesis_level += 2
return
if t == ')':
parenthesis_level -= 2
return
try: #assumption that we have just an integer
l = int(t)
except (ValueError, TypeError):
pass #if not, no problem
else:
if tree_root[L] is None: #if it is first number, put it on the left of root node
tree_root[L] = l
else: #put on the right of current_node
current_node[R] = l
return
priority = (1 if t in '+-' else 2) + parenthesis_level
#if tree_root does not have operator put it there
if tree_root[O] is None and t in o2f:
tree_root[O] = o2f[t]
tree_root[PR] = priority
return
#if new node has less or equals priority, put it on the top of tree
if tree_root[PR] >= priority:
temp = [tree_root, o2f[t], None, priority]
tree_root = current_node = temp
return
#starting from root search for a place with higher priority in hierarchy
current_node = tree_root
while type(current_node[R]) != type(1) and priority > current_node[R][PR]:
current_node = current_node[R]
#insert new node
temp = [current_node[R], o2f[t], None, priority]
current_node[R] = temp
current_node = temp
def parse(e):
token = ''
for c in e:
if c <= '9' and c >='0':
token += c
continue
if c == ' ':
if token != '':
convert_token(token)
token = ''
continue
if c in o2f:
if token != '':
convert_token(token)
convert_token(c)
token = ''
continue
print "Unrecognized character:", c
if token != '':
convert_token(token)
def main():
parse('(((3 * 4) / (1 + 2)) + 5)')
print tree_root
print process_node(tree_root)
if __name__ == '__main__':
main()