I have just created a Splunk Cloud trial account.
I can access perfectly to console with an URL in the form https://prd-p-naaaa.splunkcloud.com where naaaa is a digit and 4 letters.
I have configured an HEC token following the instructions here
But this do not shown the endpoints to use. I have checked the docs in here, and I assume that my HEC endpoint is:
https://http-inputs-prd-p-naaaa.splunkcloud.com
But this address is not DNS resolved.
I have also tried other alternatives, as dot instead minus
https://http-inputs.prd-p-naaaa.splunkcloud.com
Any comment or suggestion will be welcome
Answering my own question:
In Splunk Cloud Trial the HEC endpoint is in the same host (without prefix) and port 8088.
So, the URL is, in my case,
https://prd-p-naaaa.splunkcloud.com:8088/services/collector
Try https://http-inputs-prd-p-naaaa.splunkcloud.com:443. The "http-inputs" part does not change if you use a secure connection.
Related
I want to use Apache Nifi to track real time tweets
i pasted in my keys correctly but all requests return this error :
19:15:20 UTC ERROR
GetTwitter[id=59b5cb18-017e-1000-a6a2-991a653ec138] Received error HTTP_ERROR: HTTP/1.1 403 Forbidden. Will attempt to reconnect
i dont know where the problem is from.
thank you.
403 Forbidden means the Twitter API is rejecting your request - your access keys could be incorrect, or you might not have the right access rights for the endpoint you're accessing.
The request is understood, but it has been refused or access is not allowed. An accompanying error message will explain why.
Check that your developer account includes access to the endpoint you’re trying to use. You may also need to get your App allowlisted (e.g. Engagement API or Ads API) or sign up for access.
From https://developer.twitter.com/en/support/twitter-api/error-troubleshooting
Make sure you follow the advice from Twitter here and make note of:
With Essential access, you are only able to make requests to the Twitter API v2 endpoints, and not the v1.1 or enterprise endpoints. You are limited to 500K Tweets/month, and unable to take advantage of certain developer portal functionality such as teams and access to additional App environments
There are limits on what you can do with the Essential access level. See here.
If that doesn't help - please include a screenshot of your GetTwitter config and your version of NiFi.
If it raises 403 error while using GetTwitter processor in nifi.
API Key & consumer key aren't only a problem. Change the Twitter endpoint field while configuring the GetTwitter processor from
Filter Endpoint
to
Firehose Endpoint
In the field of twitter endpoint
Probably this will work!!
I am new in whatsapp business API integration and i successfully installed Docker and postman collection.
Referring below link : https://developers.facebook.com/docs/whatsapp/installation/dev-single-instance
Now in postman collection they mentioned regarding {{ URL }}
Collection Link : https://developers.facebook.com/docs/whatsapp/guides/postman
The first thing you should replace is the URL which represents the webapp endpoint. You'll see that all of the requests will reference this variable via {{URL}} so it's important you get this right.
How can i get this Valid URL ?
I tried hard but unable to find it.
Help me if anybody know this.
Thanks in advance.
If you have deployed whatsApp business API over docker setup .. then your endpoint url will be https://localhost:9090 .. replace "localhost" with ip of server if required.
Simply, use command netstat -nltp|grep 9090, and check on which ip the port is open for.
https://new-console.ng.bluemix.net/docs/services/apiconnect/apic_tutorial.html#apic_tutorial_01
Follow previous link to do create loopback project named ibmsvt and do test locally, we can post and get.
then publish this api as running api app on bluemix and we will get api target url and tls file.
type url and tls in api designer invoke, and publish api product again.
check api connect service and we can find that published api product has been published, configure developer portal, and invite developers
login developer portal and register one app
subscribe app to api product and run post command.
We will see that we only get can't post error information...
Please see attachment info for error info and api file.
From the screen capture provided, it looks like you're displaying the logs for the loopback application deployed on bluemix. It also looks like the POST request from APIConnect hit the Bluemix application as well. However, I'm unable to see the exact message of the error. What error did you get when you execute the POST from APIConnect? I suspect the POST did not include the $(request.path), what did you change the invoke url to be ? Can provide the x-ibm-configuration section in your yaml file? It will be located in your /definitions.
Thanks and best regards,
I am just have the exact problem, and struggled for days on redoing the tutorial several times, but still met with the same problem until found the upper reply, and gave me a hint.
In the tutorial, it says like the following:
Update the following fields with the values you copied previously:
Invoke URL: Insert the API target URL. You must specify the secure protocol HTTPS. For example:
apiconnect-ca3283b0-525c-488d-993b-3ab72fca78d0.youremail-dev.apic.mybluemix.net
TLS Profile: Insert the API invoke tls-profile.
For example:
client:Loopback-client
The origininal URL is $(runtime-url)$(request.path)$(request.search).
And the correct URL after updating is like following:
https://apiconnect-ca3283b0-525c-488d-993b-3ab72fca78d0.youremail-dev.apic.mybluemix.net$(request.path)
no slash before $(request.path), and $(request.search) should be deleted.
I also checked a tutorial video, it also do like this, but the screen for this step is passed away very quickly, you will not pay attention to this detail normally.
https://www.youtube.com/watch?v=Qku71JLv8vA&list=PLFa8jnU0KqE2eW5E449ziaurv8obSbcou&index=3&cm_mc_uid=24774488665514672571374&cm_mc_sid_50200000=1468400063
I refer to a answer given by Mike20132013 on
This IP, site or mobile application is not authorized to use this API key.
Mike in point 5 you say:
Once you are done, click create and your new Server Key will be generated and you can then add that server key to your URL.
Sorry, I am lost here. I have created a server key but to which URL are you referring to? Where exactly do I enter this URL please? I have bought the Google Reviews Plugin and I get the error message
"REQUEST_DENIED: This IP, site or mobile application is not authorized to use this API key. Request received from IP address 46.249.199.28, with empty referer" on my website.
My host has referred me to your answer.
Then you say
"Last thing is that, instead of putting the sensor=true in the middle of the URL, you can add it in the end like this:
https://maps.googleapis.com/maps/api/place/nearbysearch/json?location=yourlatitude,yourlongitude&radius=5000&key=SERVERKEY&sensor=true"
I have no idea where to input this.
Easy part first: just omit the sensor parameter entirely. As the documentation says:
The Google Places API previously required that you include the sensor parameter to indicate whether your application used a sensor to determine the user's location. This parameter is no longer required.
For the REQUEST_DENIED error, please go to the Google Developers Console and ensure that:
you are using a Server key, not a Browser key or similar.
you have the Google Places API Web Service enabled (rather than e.g. Google Places API for Android).
your Server key either has a blank field for the IP addresses that may use it, or that the IP addresses field matches your IP (46.249.199.28).
The Get a Key part of the Google Places API Web Service documentation walks you through creating an appropriately configured API key.
I want to configure a custom port for the redirect URL in the Google Developer Console for the class of 'Installed Apps'.
Following the instructions in https://developers.google.com/accounts/docs/OAuth2InstalledApp , it turns out that this should be possible:
redirect_uri=http://localhost:9004&
Going to the Console ("console.developers.google.com"), "Credentials", and "Create New Client Id", I cannot find the field, where to enter a custom port number. Does anyone know how to do this?
Thanks!
In fact, The document you've read has answered you question:
When you create a client ID in the Google Developers Console, two redirect_uris are created for you: urn:ietf:wg:oauth:2.0:oob and http://localhost. The value your application uses determines how the authorization code is returned to your application.
http://localhost signals to the Google Authorization Server that the authorization code should be returned as a query string parameter to the web server on the client. You may specify a port number without changing the Google Developers Console configuration.
I tried this idea and it works.
Give consecutive ports or probable ports in credentials as
**Redirect URIs**
http://localhost:55738/YoutubeVideoList.aspx
http://localhost:8080/YoutubeVideoList.aspx
http://localhost:8081/YoutubeVideoList.aspx
http://localhost:8082/YoutubeVideoList.aspx
http://localhost:8083/YoutubeVideoList.aspx
http://localhost:8084/YoutubeVideoList.aspx
and don't forget to give correct redirectURI with port(anyone above) while calling the authentication process.