I am writing a .NET Console application, our goal is keep a message on the queue and read the message. the message header should contain User Name & Password. I try to pass the Message with below code it is not working.
hashTable.Add(MQC.TRANSPORT_PROPERTY, MQC.TRANSPORT_MQSERIES_CLIENT);
hashTable.Add(MQC.HOST_NAME_PROPERTY, strServerName);
hashTable.Add(MQC.CHANNEL_PROPERTY, strChannelName);
hashTable.Add(MQC.PORT_PROPERTY, 1414);
hashTable.Add(MQC.USER_ID_PROPERTY, "XXXXXX");
hashTable.Add(MQC.PASSWORD_PROPERTY, "XXXXXX");
hashTable.Add(MQC.USE_MQCSP_AUTHENTICATION_PROPERTY, true);
queueManager = new MQQueueManager(strQueueManagerName,hashTable);
queue = queueManager.AccessQueue(requestQueue, MQC.MQOO_OUTPUT + MQC.MQOO_FAIL_IF_QUIESCING);
requestMessage = new MQMessage();
requestMessage.WriteString(StrAPICMessage);
requestMessage.Format = MQC.MQFMT_STRING;
requestMessage.MessageType = MQC.MQMT_REQUEST;
requestMessage.Report = MQC.MQRO_COPY_MSG_ID_TO_CORREL_ID;
requestMessage.ReplyToQueueName = responseQueue;
requestMessage.ReplyToQueueManagerName = strQueueManagerName;
queuePutMessageOptions = new MQPutMessageOptions();
queue.Put(requestMessage, queuePutMessageOptions);
In the Message Descriptor it is taking the default value mentioned MQ Server. it is not takeing my UserName "XXXXX"
I have tried using the CSICS Bridge header also unable to send the message with my application Service account + Password.
help me on this scenario.
See "MQCSP authentication mode" here: https://www.ibm.com/docs/en/ibm-mq/latest?topic=authentication-connection-java-client
It says:
In this mode, the client-side user ID is sent as well as the user ID and password to be authenticated, so you are able to use ADOPTCTX(NO). The user ID and password are available to a server-connection security exit in the MQCSP structure that is provided in the MQCXP structure.
"client-side user ID" means the UserId that the application is running under. Therefore, if you are authenticating with a different UserId than the one that the application is running under.
Therefore, you (or your MQAdmin) will need to change ADOPTCTX to YES.
Your program works fine for me, when I fill in the correct values for my qmgr connection.
Except for one change I made: instead of TRANSPORT_MQSERIES_CLIENT I used TRANSPORT_MQSERIES_MANAGED. That keeps everything in the managed .Net space.
Without that change, I was actually getting MQRC_UNSUPPORTED_FUNCTION during the connection which typically means either some kind of mismatch between versions of interfaces, or it couldn't find the C dll that underpins the unmanaged environment. And I wasn't going to take time to dig into that further.
Running amqsbcg against the output queue, I see
UserIdentifier : 'mqguest '
which is the id I had set in the USER_ID_PROPERTY.
Related
I am debugging confirmation email flow when signing up a new User in Asp.Net Core web application with Identity Server 4.
Since I had already signed up with my actual email, to reuse it, I modified the UserName and Email in AspNetUsers table using SQL Update to some random value.
Now when I am signing up with the original email again. I am getting a duplicate user error
result = await _userManager.CreateAsync(user, model.Password);
I have already:
Cleared browser cache.
Closed local IIS Express
Restarted Visual Studio.
Used_userManager.DeleteAsync() after updating the UserName and Email back to original values but this gives an Microsoft.AspNetCore.Identity.IdentityError with description Optimistic concurrency failure, object has been modified.
On running this query on Sql Server
select * from INFORMATION_SCHEMA.COLUMNS where COLUMN_NAME in ( 'UserName' , 'Email')
I get the following:
I know that this is not a good practice to mess with backend, but this is development environment and I could continue my work with another email.
I would request readers to help in understanding how the User could be safely scorched to be able to reuse the email.
Appreciate your time
I agree with Kyle's comment and to further speed up your debug process you should note that if you use gmail to do this you can debug this process using one email.
from google/gmails perspective myaccount#gmail.com == my.acount#gmail.com == m.y.a.c.c.ount#gmail.com etc etc just try it out, google disregards all period characters in the email. you can enumerate/exhaust ~2^8 emails (in this example) if you just enumerate through the local-part of the e-mail address. but from your applications side, myaccount#gmail.com is not the same as my.account#gmail.com, ie they are different user accounts. Basically you can use one email to test out this feature of yours without having to delete the user.
Here is how I did it and finally got passed the pesky "concurrency failure" error message... This works in ASP.NET CORE 2.2
Obtain the user object through the FindByName method first.
Remove the user from their assigned Role (in this case I hard coded "Admin" because that is the role I'm interested in but fill in your own), then delete the user.
//Delete user.
//Obtain the user object through the FindByName method first.
//Remove the user from their assigned Role, then delete the user.
var userManager = serviceProvider.GetRequiredService<UserManager<ApplicationUser>>();
ApplicationUser delAppUser = new ApplicationUser
{
Email = "SomeEmailForindividualAdminUser",
UserName = "SomeUsernameindividualAdminUser"
};
Task <ApplicationUser> taskGetUserAppUser = userManager.FindByNameAsync(delAppUser.UserName);
taskGetUserAppUser.Wait();
Task<IdentityResult> taskRemoveFromRoleAppUser = userManager.RemoveFromRoleAsync(taskGetUserAppUser.Result, "Admin");
taskRemoveFromRoleAppUser.Wait();
Task<IdentityResult> taskDeleteAppUser = userManager.DeleteAsync(taskGetUserAppUser.Result);
taskDeleteAppUser.Wait();
In our current WSO2 setup, after a user performs a self creation, we place his account into a locked state, and send a confirmation email to the address specified during creation. This email has a link which allows the user to verify his account.
For development purposes, we are attempting to get the workflow down using the UserInformationRecoveryService wsdl in SOAP UI. The service which we seem to want is called sendRecoveryNotification. Here is the signature of this service:
sendRecoveryNotification(String username, String key, String notificationType)
The username parameter is simply the username of the WSO2 user in question, which we have. For the notificationType we have been using email, which presumably would trigger an email to be sent to the user. The problem is with the key parameter. It is not clear what value should be used as key, and all our guesses always lead to this error response:
18001 invalid confirmation code for user : tbiegeleisen#abc.com#tenant.com
We also noticed that several other services also expect a key, and it is not clear how to get this value.
Can someone shed light on the workflow for user recovery in WSO2? It seems to be a Catch-22 with regard of requiring a token in order to generate a new token to be sent to a user.
The WSO2 documentation clearly spells out the workflow for recovery with notification. The key which needs to be used is the return value from a call to the verifyUser() SOAP web service. This service itself expects a Captcha which normally would be sent from the UI. Here is a code snippet showing how a recovery notification can be sent:
String cookies = client.login("admin#tenant.com#tenant.com", "admin");
UserInformationRecoveryUtil userInfoutil = new UserInformationRecoveryUtil(webserviceUrl, cookies);
CaptchaInfoBean captchaInfo = new CaptchaInfoBean();
captchaInfo.setImagePath(captchaPath);
captchaInfo.setSecretKey(captchaKey);
captchaInfo.setUserAnswer(captcha);
String username = emailId + "#" + tenantDomain;
String key = userInfoutil.verifyUser(username, captchaInfo);
// now pass the key based on the Captcha along with the type of recovery action
userInfoutil.sendRecoveryNotification(username, key, "accountUnLock");
I have a bit specific problem. One of the websites I am taking care of runs on ASP and obtains form, whose results are e-mailed to specific address.
For this to achieve, JMail component is used. As long as e-mail was sent locally (let say to user#clientserver.com through mailserver mail.clientserver.com), there was no problem and no need for authentication. However I recently got request to add another address to copy(copy#differentserver.com) and that's when problem occurred.
Firstly I tried adding authentication, however same error still occurred, when without:
jmail.Message error '8000ffff'
The message was undeliverable. All servers failed to receive the message
I tried google solutions, temper with some valuables. I am sure user and pass are correct, mail server address also worked when I wasn't try to sent mail with authentication.
Since I prefer PHP, my knowledge and skill with ASP are not of the bests. Have someone experienced something similar and solved it? Or does anyone know some other solution?
The code, which is used for sending mail:
set msg = Server.CreateOBject( "JMail.Message" )
msg.Charset = "windows-1250"
msg.Logging = true
msg.From= "from#mail.com"
msg.FromName= name&" - "&mail
'those should care of smtp auth
msg.MailServerUserName = "smtpuser#localmailserver.com"
msg.MailServerPassword = "smtppass"
'local mail address
msg.AddRecipient "user#localmailserver.com"
'outside mail address
msg.AddRecipient "address#differentmail.com"
msg.Subject = "Some subject"
msg.Body = "Some text"
if not msg.Send( "mail.localmailserver.com" ) then
Response.write "<pre>" & msg.log & "</pre>"
else
'Succesfully sent, redirect
Response.Redirect("mailjob_sent.asp")
end if
So the problem is solved at last. After help with analysis by my colleagues responsible for local mailserver, we found out, the problem was username for SMTP authentification.
I got confused, since it wasn't smtpuser#localmailserver.com (I'm referring to example I made), but
smtpuser#localdomainname.com.
So advice for others with similar problem, try to add testing account(one you are using for authentification) to your e-mail client(i.e. Thunderbird) and once that is allright, you have right credentials. Also try sending mail from that account elsewhere.
I want to configure an interfax account for sending and receiving faxes.
Can anyone tell me how to send/receive a test fax?
I know about the .sendFax() and .GetList() methods, but how do I send fax to myself (in test account)?
I followed the article,
Receive incoming faxes via callback to a web application
it works fine. But it only gives you intimation that you have received fax.
Edit:
You can set feedback url and use the parameter which they asked. When interfax will receive fax for you, it will send it to your feedback url and it will go directly to your database (If you set this in page load event).
You can use following code
MessageItem[] faxList = null;
Inbound inbound = new Inbound();
ListType messageListType = ListType.NewMessages;
int interFaxResult = inbound.GetList(AppConfig.InterfaxUsername, AppConfig.InterfaxPassword, messageListType, AppConfig.InterfaxMaxitems, ref faxList);
if (interFaxResult == 0)
{
// Save faxes in DB
}
I need your help on one practical issue. I have created a WCF service with basic binding with two operation contact.
1- void StartRegistration - Anonymous member can fill the basic registration form and press submit. All the information will be stored into the database and one link with some random token will be send to user's email address.
2 - void CompleteRegistration - This method validates the token sent into the email address and if token is valid, user account will be activated.
Now I have issue here. Using SoapUI I can call StartRegistration method. Email is sent to destination but I want to pass the token to CompleteRegistration method.
Since it is a WCF service so can not do dependency injection to pass the SoapUI tests :).
Please help.
If I understand your question correctly, you have two WCF methods, one for creating a token and another for confirming it.
What I would do in this case is have the first method, StartRegistration, return the token. Then you could use that token to pass into the CompleteRegistration method quite easily in Soap UI.
Another, quite messy solution, would be to have a groovy script test step in Soap UI that actually connected to the mail account, read the link and parsed the contents.
Edited:
Here is part of the script you'll need. Place it in a groovy step, that will then return the token from your mail.
Note: This code assumes that mail is plain text, not multipart. It also assumes that the mail box only has a single mail. The API for JavaMail is pretty extensive, so if you want to do any magic with it, Google is your friend :) At least, this is somewhere to start.
import javax.mail.*;
import javax.mail.internet.*;
// setup connection
Properties props = new Properties();
def host = "pop3.live.com";
def username = "mymailadress#live.com";
def password = "myPassword";
def provider = "pop3s";
// Connect to the POP3 server
Session session = Session.getDefaultInstance props, null
Store store = session.getStore provider
Folder inbox = null
String content
try
{
store.connect host, username, password
// Open the folder
inbox = store.getFolder 'INBOX'
if (!inbox) {
println 'No INBOX'
System.exit 1
}
inbox.open(Folder.READ_ONLY)
Message[] messages = inbox.getMessages()
content = messages[0].getContent()
//Do some parsing of the content here, to find your token.
//Place the result in content
}
finally
{
inbox.close false
store.close()
}
return content; //return the parsed token