I am doing a location tracking system . They have GPS devices installed in vehicles (Basic Model V5) and each device has programmed with a server IP and a port number. GPS device communicate on given IP address and port. I would like to read the packet comes from GPS device (like latitude, longitude and other information, as packet contains information in binary) .
I am getting data in below format. Please help me this is showing in which format and how to read latitude, longitude from this data.
Data format
Related
Is it possible to use the free GPS service to send other types of data such as plain text/XML/HTML??
E.G. systems for taxi companies - each car has in it a box which receives and sends information to and from the controller/ dispatch, back in the office. The driver can view all bookings and accept them, as well as tell the controller when the customer has been picked up and when they have been dropped off.
Is this all possible via the free GPS service? Or would the system's manufacturer have to pay to to rent a private satellite? Or would the system be using something similar to a mobile phone network? I would think it would be one of the first to options, as constant reliable signal is vital.
I know the question above is pretty open, and it's not what I'm too desperate to have answered...I just want to know if it is possible for me to build a device with a GPS receiver and have it send text and XML via the free GPS service?? (I want an admin to operate a team of employees from a browser, like with a taxi fleet management system).
No, GPS is a chip with an antenna that can receive only Location data.
It is not possible to send data via GPS.
All that devices that drivers, taxies, busses, tolling system use, send their data via mobile phone network.
So a device needs such a communication chip and a sim card.
Then you can send what you want.
I am working on a project that deals with GPS based tracking of vehicles. I want to know if we can use GPS data for real time tracking of vehicles in areas where there are no cellular services.
Yes you can, GPS works everywhere in the world, when you have free view to sky.
It does not work in tunnels, underground and indoors.
Without cellular service the phone needs some seconds more to get the first valid GPS position after enabling it.
We are planning for vehicle tracking system. We would like to relay on GPS Tracking System and view position report via Google Maps.
For hardware requirement we are thinking of GPS modem that can transmit data to our system.
Which GPD Modem is suitable for my project?
Use a smartphone. Haha.
On a more serious note, since it's for vehicular application only, there are a lot of companies that manufacture GPS modules (u-blox is one of them). Just google and you'll find thousands of companies manufacturing them. But before you choose a GPS module, make sure you check the regulations of your target country. If the module works on the Iridium satellite network, countries like India & China won't allow it as Iridium frequency is close to their military frequencies. In Europe you'll be better off with the Inmarsat network. So, do your homework & you should be good.
Also, if you're developing your own map interface, you might wanna ask the manufacturer if they have any existing mapping interface you can hook into or disable. You mag be charged for either.
All the best!
Are mobile networks (like GSM/GPRS/UMTS) available where you are?
if so check-out the tracking products from this site or this site (Google keywords: GPS GPRS)
If not, you should consider a custom solution, maybe someone like this company can help...
I have worked on a project that involved sending data over GSM/CDMA network. It used a simple GSM/CDMA modem connected to an embedded linux device and was a stationary piece of hardware. Attach a GPS device and it may very well be a tracking system. The problem is when the network drops or the device moves out of the network coverage area. I am not sure if there any GSM/CDMA modem available with GPS added to them as we didn't have this facility in our hardware and it was very much desirable. We needed to use a separate GPS device, mostly iPhone, separately to determine the lat long of our device.
You can use any GSM/GPRS modem equipped with GPS device. The modem will forward the GPS data to your central server through GPRS and at the server side you just need to process rcvd data and display it on google maps.
all the sets will not have inbuilt gps connectivity....for example mine is sony Ericsson z550i in this i dont have inbuilt gps service. suppose i want to use gps service in such sets what i should do? please Suggest some alternatives...
And also suggest is it mandatory to have a gprs connection for my handset if i want to avail gps service?
GPS does not require any cellular connection like GPRS, it relies purely on a GPS antenna on the phone picking signals from orbiting GPS satellites.
If a phone doesn't have a GPS system, then there might be other APIs available to obtain an approximate position from cell tower information, but generally speaking I think you're out of luck.
All I've been able to find is how to specify the sensor parameter:
http://code.google.com/apis/maps/documentation/v3/#SpecifyingSensor
But nowhere does it say how to actually USE it. Isn't the whole point to be able to get the user's current lat/long coordinates through the device GPS, or am I mistaken?
That sensor parameter is only there to indicate to Google that you are using a GPS sensor to determine the user's location.
Unless using the W3C Geolocation API in browsers that support it, it remains your responsibility to get the latitude and longitude from your GPS device to the user's browser.