I getting an error on stages on that pipeline.
GitLab CI configuration is invalid: stages config should be an array of strings.
stages:
-test
-run
image: python:latest
variables:
PIP_CACHE_DIR: "$CI_PROJECT_DIR/.cache/pip"
cache:
paths:
- .cache/pip
- venv/
test-asamasi:
stage: test
script:
- python --version
- pip install virtualenv
- virtualenv venv
- source venv/bin/activate
- python sslkontrol.py test
calistirma:
stage: run
script:
- python sslkontrol.py
On small mistake on the stages, you need to add an extra space between the - and test
I have tested your pipeline file above and I was able to get it working by adding space between - character and stage name(e.g - test) as shown below:
stages:
- test
- run
image: python:latest
variables:
PIP_CACHE_DIR: "$CI_PROJECT_DIR/.cache/pip"
cache:
paths:
- .cache/pip
- venv/
test-asamasi:
stage: test
script:
- python --version
- pip install virtualenv
- virtualenv venv
- source venv/bin/activate
- python sslkontrol.py test
calistirma:
stage: run
script:
- python sslkontrol.py
Recommendations
Now its easier to visualize, lint/validate your gitlab pipeline(e.g ) from within Gitlab console using this instructions Validate GitLab CI/CD configuration
I'm so confused why this happen. every thing seem ok in my .gitlab-ci.yml, if I run npm run build locally it works correctly as below
Problem shows as below.
image: node
cache:
paths:
- dist
- node_modules
stages:
- prepare
- build
- deploy
prepare:
stage: prepare
script:
- npm ci --cache .npm --prefer-offline
build:
stage: build
needs:
- prepare
script:
- npm run build
artifacts:
paths:
- dist
deploy:
stage: deploy
only:
- master
before_script:
- 'which ssh-agent || ( yum update -y && apt-get install openssh-client -y )'
- eval $(ssh-agent -s)
- echo "$SSH_PRIVATE_KEY_DEV"
- ssh-add <(echo "$SSH_PRIVATE_KEY_DEV")
- mkdir -p ~/.ssh
- '[[ -f /.dockerenv ]] && echo -e "Host *\n\tStrictHostKeyChecking no\n\n" > ~/.ssh/config'
script:
- scp -r ./dist/ $CUSTOM_USERNAME#$CUSTOM_IP:/home/docker-nginx
Note: the problem being build stage. I had tried to change the script of build like
script:
- echo 'whyyyyy'
then everything is ok.....why it killed my build stage at the end.
If a gitlab job gets killed it probably ran out of memory. You should take a look at your gitlab server logs and check for any out of memory Errors.
I am currently using serverless framework and setting up gitlab ci using shared runner.
Following is my gitlab-ci.yml:
image: node:latest
services:
- redis
cache:
paths:
- node_modules/
- java/
stages:
- build
- test
- review
- staging
- production
build:
stage: build
script:
- npm install
artifacts:
paths:
- node_modules/
install:java:
stage: build
script:
- apt-get update
- apt-get install -y default-jre default-jdk openjdk-7-jre openjdk-7-jdk
- apt-get update
- sls dynamodb install
artifacts:
paths:
- java/
connect:
image: redis
script:
- redis-cli -h redis PING
unit test:
stage: test
script:
- sls dynamodb start
- babel-node ./aws/createDB.js
- npm run unit
dependencies:
- build
- install:java
unit test job requires redis and is not able to connect. Following error gets thrown, when unit test job starts:
Error while creating redis client: Error: Redis connection to
127.0.0.1:6379 failed - connect ECONNREFUSED 127.0.0.1:6379
Can someone point out what's wrong with current config file, thanks!
The host address of the redis service is redis not 127.0.0.1 or localhost.
So make sure you set the host for the redis service to redis in all of your scripts and configuration files.
Just to make people's life easier, I list an example .gitlab-ci.yml to configure Redis in Gitlab CI.
services:
- redis:latest
stages:
- test
test:
script:
- echo "hello world!"
stage: test
variables:
REDIS_PORT: 6379
REDIS_HOST: redis
REDIS_URL: redis://redis:6379
I've been working on setting up an automated RPM build and I'd like to perform a simple test on the SPEC file before proceeding with any build steps. The problem I am having is that the job always seems to jump to the deploy stage. Here is the relevant snippet from my .gitlab-ci.yml:
stages:
- test
- build
- deploy
job1:
stage: test
script:
# Test the SPEC file
- su - newbuild -c "rpmbuild --nobuild -vv ~/rpmbuild/SPECS/package.SPEC"
stage: build
script:
# Install our required packages
- yum -y install openssl-devel freetype-devel fontconfig-devel libicu-devel sqlite-devel libpng-devel libjpeg-devel ruby
# Initialize the submodules to build
- git submodule update --init
# build the RPM
- su - newbuild -c "rpmbuild -ba --target=`uname -m` -vv ~/rpmbuild/SPECS/package.SPEC"
stage: deploy
script:
# move the RPM/SRPM
- mkdir -pv $BUILD_DIR/$RELEASEVER/{SRPMS,x86_64}
- 'for f in $WORK_DIR/rpmbuild/RPMS/x86_64/*; do cp -v "$f" $BUILD_DIR/$RELEASEVER/x86_64; done'
- 'for f in $WORK_DIR/rpmbuild/SRPMS/*; do cp -v "$f" $BUILD_DIR/$RELEASEVER/SRPMS; done'
# create the repo
- createrepo -dvp $BUILD_DIR/$RELEASEVER
# update latest
- 'if [ $CI_BUILD_REF_NAME == "master" ]; then rm $PROJECT_DIR/latest; ln -sv $(basename $BUILD_DIR) $PROJECT_DIR/latest; fi'
- 'if [ $CI_BUILD_REF_NAME == "devel" ]; then rm $PROJECT_DIR/latest-dev; ln -sv $(basename $BUILD_DIR) $PROJECT_DIR/latest-dev; fi'
tags:
- repos
I've not found any questions or online documentation to properly explain this to me so any help is appreciated!
You have all stages in one job which does not work. You need to split it up into individual jobs for the three different stages.
Quote from the documentation:
First all jobs of build are executed in parallel.
If all jobs of build succeeds, the test jobs are executed in parallel.
If all jobs of test succeeds, the deploy jobs are executed in parallel.
If all jobs of deploy succeeds, the commit is marked as success.
If any of the previous jobs fails, the commit is marked as failed and no jobs of further stage are executed.
Something like this should work:
stages:
- test
- build
- deploy
do_things_on_stage_test:
script:
- do things
stage: test
do_things_on_stage_build:
script:
- do things
stage: build
do_things_on_stage_deploy:
script:
- do things
stage: deploy
I think you assume that the stages are build on top of each other, which is not the case. If one of your stages needs something like pre-installed packages, you have to add a before_script directive. Think of the stages as in: test-if-build-succeeds, test-if-depoy-succeeds, etc.
If a GitLab project is configured on GitLab CI, is there a way to run the build locally?
I don't want to turn my laptop into a build "runner", I just want to take advantage of Docker and .gitlab-ci.yml to run tests locally (i.e. it's all pre-configured). Another advantage of that is that I'm sure that I'm using the same environment locally and on CI.
Here is an example of how to run Travis builds locally using Docker, I'm looking for something similar with GitLab.
Since a few months ago this is possible using gitlab-runner:
gitlab-runner exec docker my-job-name
Note that you need both docker and gitlab-runner installed on your computer to get this working.
You also need the image key defined in your .gitlab-ci.yml file. Otherwise won't work.
Here's the line I currently use for testing locally using gitlab-runner:
gitlab-runner exec docker test --docker-volumes "/home/elboletaire/.ssh/id_rsa:/root/.ssh/id_rsa:ro"
Note: You can avoid adding a --docker-volumes with your key setting it by default in /etc/gitlab-runner/config.toml. See the official documentation for more details. Also, use gitlab-runner exec docker --help to see all docker-based runner options (like variables, volumes, networks, etc.).
Due to the confusion in the comments, I paste here the gitlab-runner --help result, so you can see that gitlab-runner can make builds locally:
gitlab-runner --help
NAME:
gitlab-runner - a GitLab Runner
USAGE:
gitlab-runner [global options] command [command options] [arguments...]
VERSION:
1.1.0~beta.135.g24365ee (24365ee)
AUTHOR(S):
Kamil Trzciński <ayufan#ayufan.eu>
COMMANDS:
exec execute a build locally
[...]
GLOBAL OPTIONS:
--debug debug mode [$DEBUG]
[...]
As you can see, the exec command is to execute a build locally.
Even though there was an issue to deprecate the current gitlab-runner exec behavior, it ended up being reconsidered and a new version with greater features will replace the current exec functionality.
Note that this process is to use your own machine to run the tests using docker containers. This is not to define custom runners. To do so, just go to your repo's CI/CD settings and read the documentation there. If you wanna ensure your runner is executed instead of one from gitlab.com, add a custom and unique tag to your runner, ensure it only runs tagged jobs and tag all the jobs you want your runner to be responsible of.
I use this docker-based approach:
Edit: 2022-10
docker run --entrypoint bash --rm -w $PWD -v $PWD:$PWD -v /var/run/docker.sock:/var/run/docker.sock gitlab/gitlab-runner:latest -c 'git config --global --add safe.directory "*";gitlab-runner exec docker test'
For all git versions > 2.35.2. You must add safe.directory within the container to avoid fatal: detected dubious ownership in repository at.... This also true for patched git versions < 2.35.2. The old command will not work anymore.
Details
0. Create a git repo to test this answer
mkdir my-git-project
cd my-git-project
git init
git commit --allow-empty -m"Initialize repo to showcase gitlab-runner locally."
1. Go to your git directory
cd my-git-project
2. Create a .gitlab-ci.yml
Example .gitlab-ci.yml
image: alpine
test:
script:
- echo "Hello Gitlab-Runner"
3. Create a docker container with your project dir mounted
docker run -d \
--name gitlab-runner \
--restart always \
-v $PWD:$PWD \
-v /var/run/docker.sock:/var/run/docker.sock \
gitlab/gitlab-runner:latest
(-d) run container in background and print container ID
(--restart always) or not?
(-v $PWD:$PWD) Mount current directory into the current directory of the container - Note: On Windows you could bind your dir to a fixed location, e.g. -v ${PWD}:/opt/myapp. Also $PWD will only work at powershell not at cmd
(-v /var/run/docker.sock:/var/run/docker.sock) This gives the container access to the docker socket of the host so it can start "sibling containers" (e.g. Alpine).
(gitlab/gitlab-runner:latest) Just the latest available image from dockerhub.
4. Execute with
Avoid fatal: detected dubious ownership in repository at... More info
docker exec -it -w $PWD gitlab-runner git config --global --add safe.directory "*"
Actual execution
docker exec -it -w $PWD gitlab-runner gitlab-runner exec docker test
# ^ ^ ^ ^ ^ ^
# | | | | | |
# (a) (b) (c) (d) (e) (f)
(a) Working dir within the container. Note: On Windows you could use a fixed location, e.g. /opt/myapp.
(b) Name of the docker container
(c) Execute the command "gitlab-runner" within the docker container
(d)(e)(f) run gitlab-runner with "docker executer" and run a job named "test"
5. Prints
...
Executing "step_script" stage of the job script
$ echo "Hello Gitlab-Runner"
Hello Gitlab-Runner
Job succeeded
...
Note: The runner will only work on the commited state of your code base. Uncommited changes will be ignored. Exception: The .gitlab-ci.yml itself does not have be commited to be taken into account.
Note: There are some limitations running locally. Have a look at limitations of gitlab runner locally.
I'm currently working on making a gitlab runner that works locally.
Still in the early phases, but eventually it will become very relevant.
It doesn't seem like gitlab want/have time to make this, so here you go.
https://github.com/firecow/gitlab-runner-local
If you are running Gitlab using the docker image there: https://hub.docker.com/r/gitlab/gitlab-ce, it's possible to run pipelines by exposing the local docker.sock with a volume option: -v /var/run/docker.sock:/var/run/docker.sock. Adding this option to the Gitlab container will allow your workers to access to the docker instance on the host.
The GitLab runner appears to not work on Windows yet and there is an open issue to resolve this.
So, in the meantime I am moving my script code out to a bash script, which I can easily map to a docker container running locally and execute.
In this case I want to build a docker container in my job, so I create a script 'build':
#!/bin/bash
docker build --pull -t myimage:myversion .
in my .gitlab-ci.yaml I execute the script:
image: docker:latest
services:
- docker:dind
before_script:
- apk add bash
build:
stage: build
script:
- chmod 755 build
- build
To run the script locally using powershell I can start the required image and map the volume with the source files:
$containerId = docker run --privileged -d -v ${PWD}:/src docker:dind
install bash if not present:
docker exec $containerId apk add bash
Set permissions on the bash script:
docker exec -it $containerId chmod 755 /src/build
Execute the script:
docker exec -it --workdir /src $containerId bash -c 'build'
Then stop the container:
docker stop $containerId
And finally clean up the container:
docker container rm $containerId
Another approach is to have a local build tool that is installed on your pc and your server at the same time.
So basically, your .gitlab-ci.yml will basically call your preferred build tool.
Here an example .gitlab-ci.yml that i use with nuke.build:
stages:
- build
- test
- pack
variables:
TERM: "xterm" # Use Unix ASCII color codes on Nuke
before_script:
- CHCP 65001 # Set correct code page to avoid charset issues
.job_template: &job_definition
except:
- tags
build:
<<: *job_definition
stage: build
script:
- "./build.ps1"
test:
<<: *job_definition
stage: test
script:
- "./build.ps1 test"
variables:
GIT_CHECKOUT: "false"
pack:
<<: *job_definition
stage: pack
script:
- "./build.ps1 pack"
variables:
GIT_CHECKOUT: "false"
only:
- master
artifacts:
paths:
- output/
And in nuke.build i've defined 3 targets named like the 3 stages (build, test, pack)
In this way you have a reproducible setup (all other things are configured with your build tool) and you can test directly the different targets of your build tool.
(i can call .\build.ps1 , .\build.ps1 test and .\build.ps1 pack when i want)
I am on Windows using VSCode with WSL
I didn't want to register my work PC as a runner so instead I'm running my yaml stages locally to test them out before I upload them
$ sudo apt-get install gitlab-runner
$ gitlab-runner exec shell build
yaml
image: node:10.19.0 # https://hub.docker.com/_/node/
# image: node:latest
cache:
# untracked: true
key: project-name
# key: ${CI_COMMIT_REF_SLUG} # per branch
# key:
# files:
# - package-lock.json # only update cache when this file changes (not working) #jkr
paths:
- .npm/
- node_modules
- build
stages:
- prepare # prepares builds, makes build needed for testing
- test # uses test:build specifically #jkr
- build
- deploy
# before_install:
before_script:
- npm ci --cache .npm --prefer-offline
prepare:
stage: prepare
needs: []
script:
- npm install
test:
stage: test
needs: [prepare]
except:
- schedules
tags:
- linux
script:
- npm run build:dev
- npm run test:cicd-deps
- npm run test:cicd # runs puppeteer tests #jkr
artifacts:
reports:
junit: junit.xml
paths:
- coverage/
build-staging:
stage: build
needs: [prepare]
only:
- schedules
before_script:
- apt-get update && apt-get install -y zip
script:
- npm run build:stage
- zip -r build.zip build
# cache:
# paths:
# - build
# <<: *global_cache
# policy: push
artifacts:
paths:
- build.zip
deploy-dev:
stage: deploy
needs: [build-staging]
tags: [linux]
only:
- schedules
# # - branches#gitlab-org/gitlab
before_script:
- apt-get update && apt-get install -y lftp
script:
# temporarily using 'verify-certificate no'
# for more on verify-certificate #jkr: https://www.versatilewebsolutions.com/blog/2014/04/lftp-ftps-and-certificate-verification.html
# variables do not work with 'single quotes' unless they are "'surrounded by doubles'"
- lftp -e "set ssl:verify-certificate no; open mediajackagency.com; user $LFTP_USERNAME $LFTP_PASSWORD; mirror --reverse --verbose build/ /var/www/domains/dev/clients/client/project/build/; bye"
# environment:
# name: staging
# url: http://dev.mediajackagency.com/clients/client/build
# # url: https://stg2.client.co
when: manual
allow_failure: true
build-production:
stage: build
needs: [prepare]
only:
- schedules
before_script:
- apt-get update && apt-get install -y zip
script:
- npm run build
- zip -r build.zip build
# cache:
# paths:
# - build
# <<: *global_cache
# policy: push
artifacts:
paths:
- build.zip
deploy-client:
stage: deploy
needs: [build-production]
tags: [linux]
only:
- schedules
# - master
before_script:
- apt-get update && apt-get install -y lftp
script:
- sh deploy-prod
environment:
name: production
url: http://www.client.co
when: manual
allow_failure: true
The idea is to keep check commands outside of .gitlab-ci.yml. I use Makefile to run something like make check and my .gitlab-ci.yml runs the same make commands that I use locally to check various things before committing.
This way you'll have one place with all/most of your commands (Makefile) and .gitlab-ci.yml will have only CI-related stuff.
I have written a tool to run all GitLab-CI job locally without have to commit or push, simply with the command ci-toolbox my_job_name.
The URL of the project : https://gitlab.com/mbedsys/citbx4gitlab
Years ago I build this simple solution with Makefile and docker-compose to run the gitlab runner in docker, you can use it to execute jobs locally as well and should work on all systems where docker works:
https://gitlab.com/1oglop1/gitlab-runner-docker
There are few things to change in the docker-compose.override.yaml
version: "3"
services:
runner:
working_dir: <your project dir>
environment:
- REGISTRATION_TOKEN=<token if you want to register>
volumes:
- "<your project dir>:<your project dir>"
Then inside your project you can execute it the same way as mentioned in other answers:
docker exec -it -w $PWD runner gitlab-runner exec <commands>..
I recommend using gitlab-ci-local
https://github.com/firecow/gitlab-ci-local
It's able to run specific jobs as well.
It's a very cool project and I have used it to run simple pipelines on my laptop.