WITH c AS
(SELECT A.QuestionHdrKey AS QuestionHdrKey1,
A.DivisionKey AS DivisionKey1,
COUNT(1) AS QCount
FROM Mobile.QuestionLocationMap A WITH (NOLOCK)
INNER JOIN Mobile.Question b WITH (NOLOCK) ON A.QuestionKey = b.PKey
WHERE A.QuestionHdrKey = 200305685377000000
GROUP BY A.QuestionHdrKey,
A.DivisionKey),
d AS
(SELECT a.QuestionHdrKey,
a.QuestionKey,
a.DivisionKey,
a.InvDate,
a.HdrKey,
ROW_NUMBER() OVER (PARTITION BY a.DivisionKey,
a.invdate,
a.HdrKey
ORDER BY a.QuestionKey) AS RowId
FROM mobile.StatusReport a WITH (NOLOCK)
INNER JOIN mobile.Question b WITH (NOLOCK) ON a.QuestionKey = b.PKey
AND b.QuestionType = 'rate'
AND InputType = 'numeric'
WHERE a.QuestionHdrKey = '200305685377000000'
GROUP BY a.QuestionHdrKey,
a.DivisionKey,
a.HdrKey,
a.InvDate,
a.QuestionKey)
SELECT a.DivisionKey,
a.InvDate AS ModifiedDate,
a.QuestionHdrKey,
a.HdrKey,
COUNT(DISTINCT a.QuestionKey) AS QuestionKey,
SUM(CAST(a.Value AS int)) AS value,
SUM(b.Rate) AS RATE
--case when a.invdate between '2020-05-09' and '2022-03-31' then case when then case when cast(Value as int)*5>5 then 5 else cast(Value as int)*5 end else cast(Value as int) end as value,c.QCount
FROM mobile.StatusReport a WITH (NOLOCK)
INNER JOIN mobile.Question b WITH (NOLOCK) ON a.QuestionKey = b.PKey
AND b.QuestionType = 'rate'
AND InputType = 'numeric'
INNER JOIN c WITH (NOLOCK) ON a.DivisionKey = c.DivisionKey1
INNER JOIN d WITH (NOLOCK) ON a.HdrKey = d.HdrKey
AND a.QuestionKey = d.QuestionKey
WHERE a.QuestionHdrKey = '200305685377000000'
--and a.HdrKey='210305757994230000'
AND d.RowId <= c.QCount
GROUP BY a.DivisionKey,
a.InvDate,
a.QuestionHdrKey,
a.HdrKey,
c.QCount;
I have this table queried in PowerBI which generates the below table:
The SQL is validated successfully in Information Design Tool but when trying to view its values, it shows an error in the code. How do I work around this?
Alright, after figuring out that "with as" doesn't work outside of the select function in the IDS, I've ditched the aliases and used sub-queries.
select HdrKey,a.DivisionKey,InvDate,RowId ,count(b.QuestionKey) as QCount,qCOUNT_,[value],POINT
from
(select distinct a.HdrKey,a.DivisionKey, a.InvDate, ROW_NUMBER() OVER(PARTITION BY QuestionHdrKey, DivisionKey, a.InvDate ORDER BY a.InvDate) AS RowId,
sum(cast([value] as int)) AS [value], COUNT(DISTINCT A.QuestionKey) AS qCOUNT_, SUM(B.Rate) AS POINT
from NominInventory.mobile.StatusReport a with(nolock)
inner join NominInventory.mobile.Question b with(nolock) on a.QuestionKey=b.PKey and B.QuestionType = 'rate' and InputType='numeric'
where a.QuestionHdrKey='200305685377000000'
GROUP BY a.HdrKey,a.DivisionKey, a.InvDate,QuestionHdrKey
) a
inner join NominInventory.Mobile.QuestionLocationMap b with(nolock) on a.DivisionKey=b.DivisionKey and b.QuestionHdrKey = '200305685377000000'
group by HdrKey,a.DivisionKey,InvDate,RowId,qCOUNT_,[value],POINT
having a.RowId<=count(b.QuestionKey)
Related
In this stored procedure, I need to pass multiple parameter values in #GDNNO. Right now I can pass only a single value.
Please help me.
ALTER PROCEDURE dbo.xspSHEGONPrintQuery4
#GDNNO varchar(4000) = ''
AS
BEGIN
SELECT
a.ID, a.[To], a.FlowCode, a.TranNum, a.Status,
ART.ARTICLECODE, StockGDNID, DetailID, SubDocCode, ArticleID,
ColorCode, ColorName, SizeCode, SizeName,
DispatchedUnits * (CASE WHEN u.value IS NULL THEN FreezeStoringUOM ELSE u.value END) AS DispatchedUnits
FROM
xtstockgdn a (nolock)
JOIN
xtstockgdndetail b (nolock) ON a.id = b.stockgdnid
JOIN
XTARTICLE ART (nolock) ON ART.ID = B.ARTICLEID
LEFT JOIN
xtUOMConversion u (nolock) ON u.FromUOM = art.StoringUOM
AND u.ToUOM = art.consuom
WHERE
a.ID IN (#GDNNO)
AND FlowCode = 'POO_RET[E-]'
END
Since your query is only Select it can be change to TVF(table-value function). Change your Procedure to TVF
CREATE FUNCTION dbo.xspSHEGONPrintQuery4(
#GDNNO varchar(4000) = ''
)
RETURNS TABLE
AS
RETURN
SELECT
a.ID, a.[To], a.FlowCode, a.TranNum, a.Status,
ART.ARTICLECODE, StockGDNID, DetailID, SubDocCode, ArticleID,
ColorCode, ColorName, SizeCode, SizeName,
DispatchedUnits * (CASE WHEN u.value IS NULL THEN FreezeStoringUOM ELSE u.value END) AS DispatchedUnits
FROM
xtstockgdn a (nolock)
JOIN
xtstockgdndetail b (nolock) ON a.id = b.stockgdnid
JOIN
XTARTICLE ART (nolock) ON ART.ID = B.ARTICLEID
LEFT JOIN
xtUOMConversion u (nolock) ON u.FromUOM = art.StoringUOM
AND u.ToUOM = art.consuom
WHERE
a.ID IN (#GDNNO)
AND FlowCode = 'POO_RET[E-]'
END
Then use Cross apply to your TVF
Select a.GDNNO,b.* from yourtable a /*list of GDNNO Values */
Cross Apply dbo.xspSHEGONPrintQuery4(a.GDNNO) b
you can use Dynamic query as well
I have the following query; can you help me with it? I have comboAmount and TotalPrice, I want TotalPrice + Combo Amount add into newComboAmount, but it's showing me a wrong result because my ComboUniqueId is different from other please check below picture and query
SELECT
CAST(CASE
WHEN a.TotalPrice != 0
THEN 1
ELSE 0
END AS bit) AS CheckOtherPrice,
a.OrderDetailId, a.ItemId,
b.ItemCode, b.ItemName,
e.GroupName,
a.Quantity, a.Price, a.TotalPrice,
a.OrderId, ISNULL(a.ComboId, 0) ComboId,
(a.ComboAmount + SUM(a.TotalPrice) OVER (ORDER BY a.OrderDetailId)) AS new_comboamount,
a.ComboGroupId, a.ComboAmount, a.ComboUniqueId,
c.ComboName, d.GroupName ComboGroupName,
a.OfferMasterId
FROM
OrderDetail a
INNER JOIN
ItemMaster b ON a.ItemId = b.ItemId AND a.OrderId IN (985)
INNER JOIN
ItemGroup e ON b.ItemGroupId = e.ItemGroupId
LEFT JOIN
ComboMaster c ON a.ComboId = c.ComboId
LEFT JOIN
ComboGroup d ON a.ComboGroupId = d.GroupId
I think you just need a partition by:
( a.ComboAmount + sum(a.TotalPrice) over (partition by combouniqueid order by a.OrderDetailId) ) as new_comboamount
I am using the following SQL code to JOIN a few tables, but need to show unique values for the s.incidentid based on the latest s.createdate.
I know I need to use a Sub query with Maxdate, but I am not sure on the correct syntax.
This is my first query with multiple joins and I am struggling to get my head round it.
Here is my code:
SELECT
s.incidentid,
u.internalid as AssignedTo,
u.fullname as AssignedTo_FullName,
s.createby as AssignedBy,
u2.fullname as AssignedBy_FullName,
s.createdate as AssignedTime,
i.[description],
i.fix,
st.[description] as [Status],
(SELECT (CASE WHEN u.internalid = s.createby THEN 'Yes' ELSE 'No' END) as SelfAssigned),
d.d1,
d.d2,
d.d3,
d.d4,
d.d5
FROM dbo.IncidentServiceLevelAgreement s
JOIN dbo.UserAll u on u.userid = s.userid
JOIN dbo.UserAll u2 on u2.internalid = s.createby
JOIN dbo.IncidentAll i on s.incidentid = i.incidentid
JOIN dbo.[Status] st on i.statusid = st.statusid
JOIN dbo.flatdiagnosis d on i.actualdiagnosisid = d.diagnosisid
WHERE (s.groupId = '4954' and s.incidentServiceLevelAgreementTypeID = '9')
ORDER BY AssignedTime DESC
Any help greatly appreciated.
The easiest is to use a CTE and the ROW_NUMBER function:
WITH CTE AS
(
SELECT RN = ROW_NUMBER() OVER ( PARTITION BY incidentid
ORDER BY createdate DESC ),
s.Incidentid,
u.Internalid AS AssignedTo,
u.Fullname AS AssignedTo_FullName,
s.Createby AS AssignedBy,
u2.Fullname AS AssignedBy_FullName,
s.Createdate AS AssignedTime,
i.[Description],
i.Fix,
st.[Description] AS [Status],
SelfAssigned = CASE WHEN u.Internalid = s.Createby
THEN 'Yes' ELSE 'No' END,
d.D1,
d.D2,
d.D3,
d.D4,
d.D5
FROM dbo.Incidentservicelevelagreement s
JOIN dbo.Userall u
ON u.Userid = s.Userid
JOIN dbo.Userall u2
ON u2.Internalid = s.Createby
JOIN dbo.Incidentall i
ON s.Incidentid = i.Incidentid
JOIN dbo.[Status] st
ON i.Statusid = st.Statusid
JOIN dbo.Flatdiagnosis d
ON i.Actualdiagnosisid = d.Diagnosisid
WHERE ( s.Groupid = '4954'
AND s.Incidentservicelevelagreementtypeid = '9' )
)
SELECT * FROM CTE WHERE RN = 1
ORDER BY AssignedTime DESC
(instead of SELECT * list all columns explicitly, I didn't feel like it)
I have a running query where I need to expand the XML hierarchy.
The existing query does this (WORKING):
select a.fields, (select c.fields from c),
(select d.fields from d), (select e.fields from e)
from a
--REPAIR ORDERS, PARTS, LABOR, NARRATIVE
I need to create another level at b (THIS IS THE JOB ORDER FOR REPAIR ORDERS, and aliased as bb):
--REPAIR ORDERS, JOB ID (JOB ID/PARTS, JOB ID/LABOR, JOB ID/NARRATIVE)
select a.fields, select b.fields, (select c.fields from c),
(select d.fields from d), (select e.fields from e) from b)
bb
from a
so here's the code (this inner join is killing me):
(also, think as REPAIR NARRATIVES as C and once I get this going I need to add D & E)
IT's the INNER JOIN at the comments line which is stopping me:
declare #OEMDEALERCODE nvarchar(20),#SDate smalldatetime,#EDate smalldatetime,#DMxServiceROJobStatus_ReadyToInvoice int
SET #SDate = '01/01/2013'
SET #EDate = '12/31/2013'
SET #DMxServiceROJobStatus_ReadyToInvoice = dbo.[fn_DMxSysGetEnumItemValue](N'DMxServiceROJobStatus', N'ReadyToInvoice')
-- JobId hierarchy
select ff.QualifyingROX, ff.JobId, ff.JobName,
(
---------------------------------------------------------------------------------------------------
SELECT DISTINCT --REPAIR NARRATIVE
Concern, Cause, Correction, CauseMore, ConcernMore, CorrectionMore
FROM
(
SELECT DISTINCT
TOP (100) PERCENT dbo.DMXDEALERINFORMATIONTABLE.OEMDEALERCODE,
dbo.DMXSERVICEROTABLE.ROID,
dbo.DMXSERVICEROJOB.JOBID,
dbo.DMXSERVICEROJOB.STATUS,
DMXSERVICECCCSTATEMENT_1.TEXT CONCERN,
dbo.DMXSERVICECCCSTATEMENT.TEXT CAUSE,
DMXSERVICECCCSTATEMENT_2.TEXT CORRECTION,
dbo.DMXSERVICEROJOB.CUSTOMCAUSETEXT CAUSEMORE,
dbo.DMXSERVICEROJOB.CUSTOMCONCERNTEXT CONCERNMORE,
dbo.DMXSERVICEROJOB.CUSTOMCORRECTIONTEXT CORRECTIONMORE,
DMXSERVICECCCSTATEMENT_2.RECVERSION Expr5,
MAX(dbo.DMXSERVICEROJOB.RECVERSION) Expr4,
MAX(dbo.DMXSERVICECCCSTATEMENT.RECVERSION) Expr3,
MAX(DMXSERVICECCCSTATEMENT_1.RECVERSION) Expr1,
MAX(DMXSERVICECCCSTATEMENT_2.RECVERSION) Expr2
FROM dbo.DMXSERVICEROJOB (NOLOCK) INNER JOIN
dbo.DMXDEALERINFORMATIONTABLE (NOLOCK) INNER JOIN
dbo.DMXSERVICEROTABLE (NOLOCK) ON dbo.DMXDEALERINFORMATIONTABLE.PARTITION = dbo.DMXSERVICEROTABLE.PARTITION ON
dbo.DMXSERVICEROJOB.ROTABLEREF = dbo.DMXSERVICEROTABLE.RECID LEFT OUTER JOIN
dbo.DMXSERVICECCCSTATEMENT DMXSERVICECCCSTATEMENT_2 ON
dbo.DMXSERVICEROJOB.CORRECTIONREF = DMXSERVICECCCSTATEMENT_2.RECID LEFT OUTER JOIN
dbo.DMXSERVICECCCSTATEMENT ON dbo.DMXSERVICEROJOB.CAUSEREF = dbo.DMXSERVICECCCSTATEMENT.RECID LEFT OUTER JOIN
dbo.DMXSERVICECCCSTATEMENT DMXSERVICECCCSTATEMENT_1 ON
dbo.DMXSERVICEROJOB.CONCERNREF = DMXSERVICECCCSTATEMENT_1.RECID
GROUP BY dbo.DMXDEALERINFORMATIONTABLE.OEMDEALERCODE, dbo.DMXSERVICEROTABLE.ROID, dbo.DMXSERVICEROJOB.JOBID, dbo.DMXSERVICEROJOB.STATUS, DMXSERVICECCCSTATEMENT_1.TEXT, dbo.DMXSERVICECCCSTATEMENT.TEXT,
DMXSERVICECCCSTATEMENT_2.TEXT, dbo.DMXSERVICEROJOB.CUSTOMCAUSETEXT, dbo.DMXSERVICEROJOB.CUSTOMCONCERNTEXT,
dbo.DMXSERVICEROJOB.CUSTOMCORRECTIONTEXT, DMXSERVICECCCSTATEMENT_2.RECID, DMXSERVICECCCSTATEMENT_2.PARTITION,
dbo.DMXSERVICECCCSTATEMENT.RECVERSION, dbo.DMXSERVICECCCSTATEMENT.PARTITION, DMXSERVICECCCSTATEMENT_1.PARTITION,
dbo.DMXSERVICEROJOB.RECVERSION, dbo.DMXSERVICEROJOB.RECID, dbo.DMXSERVICEROJOB.PARTITION,
DMXSERVICECCCSTATEMENT_1.RECVERSION, DMXSERVICECCCSTATEMENT_1.RECID, dbo.DMXSERVICECCCSTATEMENT.RECID,
DMXSERVICECCCSTATEMENT_2.RECVERSION
having dbo.DMXDEALERINFORMATIONTABLE.OEMDEALERCODE = #OEMDEALERCODE
--and dbo.DMXSERVICEROTABLE.ROID = ff.QualifyingROX
and dbo.DMXSERVICEROJOB.STATUS=#DMxServiceROJobStatus_ReadyToInvoice
ORDER BY Expr4 DESC, Expr3 DESC, Expr1 DESC, Expr2 DESC
) cc
inner join ff on cc.ROID = ff.QualifyingROX
---------------------------------------------------------------------------------------------------
)
FROM
(
SELECT DISTINCT --REPAIR NARRATIVE
ee.JobId, ee.JobName, ee.QualifyingROX
from
(
SELECT DISTINCT TOP (100) PERCENT
dbo.DMXSERVICEROTABLE.ROID QualifyingROX,
dbo.DMXSERVICEROJOB.JOBID JobId,
MAX(DISTINCT dbo.DMXSERVICEROJOB.NAME) JobName
FROM dbo.DMXSERVICEROTABLE (nolock) INNER JOIN dbo.DMXSERVICEROJOB (NOLOCK) ON dbo.DMXSERVICEROTABLE.RECID = dbo.DMXSERVICEROJOB.ROTABLEREF
GROUP BY dbo.DMXSERVICEROTABLE.ROID, dbo.DMXSERVICEROJOB.JOBID
ORDER BY QualifyingROX, dbo.DMXSERVICEROJOB.JOBID
) ee
) ff
for XML PATH ('JobDetail'), ROOT ('Jobs'), TYPE
I Have a table which holds date but I need to know the latest date where a condition is true per location, only issue is once I add a column called 'notes' it breaks the query and returns too many rows, current query is ...
SELECT
Location,
MAX(date) AS date,
type,
notes
FROM NotesTable a
INNER JOIN Location b on a.LocationID = b.LocationID
INNER JOIN Type c on a.typeid = c.typeid
WHERE typeid <> 8
GROUP BY Location, type, notes
If I comment out the notes column then it works fine but as soon as I add that to the grouping it then returns more rows than required.
Have tried using a subquery but still cant get it working, subquery below
SELECT
r.location,
r.date,
r.type,
t.notes
FROM (SELECT Location, MAX(date), type
FROM NotesTable a INNER JOIN Location b on a.LocationID = b.LocationID
INNER JOIN Type c on a.typeid = c.typeid
WHERE typeid <> 8
GROUP BY location,type
) r
INNER JOIN NotesTable t ON t.date = r.date
Anyone got any other suggestions?
select * from
(
SELECT Location,Date, Type, Notes, Row_Number() Over (Partition By Location, Type order by date desc) RN
FROM
NotesTable a
INNER JOIN Location b on a.LocationID = b.LocationID
INNER JOIN Type c on a.typeid = c.typeid
WHERE typeid <> 8
) v
WHERE rn = 1
Your query is almost correct, you need to add this additional condition in ON clause
AND
t.location = r.location AND
t.type = r.type
full query,
SELECT r.location
, r.DATE
, r.type
, t.notes
FROM (
SELECT Location
, MAX(DATE) maxDate
, type
FROM NotesTable a
INNER JOIN Location b
ON a.LocationID = b.LocationID
INNER JOIN Type c
ON a.typeid = c.typeid
WHERE typeid <> 8
GROUP BY location
, type
) r
INNER JOIN NotesTable t
ON t.DATE = r.maxDate AND
t.location = r.location AND
t.type = r.type