After some research I renamed my cloned react native project and it works but I got a warning message, I'm worried about future problems because this message mainly for Google Play publishing and security.
The process was:
# PowerShell7:
cd C:\myDevFolder
rm -R C:\myDevFolder\myNewProjectName
git clone https://github.com/someRepo0000001/someProj00001.git myNewProjectName
cd C:\myDevFolder\myNewProjectName
# replace every myOLDProjectName for myNewProjectName on every file
cd .\android\app\src\main\java\com\
mv .\myOLDProjectName\ .\myNewProjectName\
cd C:\myDevFolder\myNewProjectName
cd .\ios\
mv .\myOLDProjectName\ .\myNewProjectName\
mv .\myOLDProjectName-tvOS\ .\myNewProjectName-tvOS\
mv .\myOLDProjectName-tvOSTests\ .\myNewProjectName-tvOSTests\
mv .\myOLDProjectName.xcodeproj\ .\myNewProjectName.xcodeproj\
mv .\myOLDProjectName.xcworkspace\ .\myNewProjectName.xcworkspace\
mv .\myOLDProjectNameTests\ .\myNewProjectNameTests\
cd C:\myDevFolder\myNewProjectName
yarn
npx react-native run-android
The warning message was:
warn Invalid application's package name "com.myNewProjectName" in
'AndroidManifest.xml'. Read guidelines for setting the package name here:
https://developer.android.com/studio/build/application-id
Others rename process I found dont works, including the most viewed page about it here:
Renaming a React Native project?
There multiple places where you should replace the old name with the new one
So as an easy solution change the name with react-native-rename package
react-native-rename "new name"
and reset the cache
Related
I'm trying to install this package ncurses5-compat-libs but I can because of the following problem.
What I did:
1. yay ncurses5-compat-libs
There are 2 types of errors:
Either I will check 'Y' and I will add the key, so in this case, I will receive the error message as follow
gpg: keyserver receive failed: Permission denied
==> Error: Problem importing keys
Or I will check as 'n' to don't add the key and I will receive
==> Verifying source file signatures with gpg...
ncurses-6.1.tar.gz ... FAILED (unknown public key 702353E0F7E48EDB)
==> ERROR: One or more PGP signatures could not be verified!
Error downloading sources: ncurses5-compat-libs
2. sudo gpg --recv-keys C52048C0C0748FEE227D47A2702353E0F7E48EDB
I've tried to add it manually but it didn't work.
3. sudo gpg --recv-keys 702353E0F7E48EDB
Also this one I've tried to add it manually but it didn't work
4. yay -S --noconfirm --needed ncurses5-compat-libs
5. Trying to fallow this forum
and least but not last
6. I've tried to clone the repository by hand by following
git clone http://aur.archlinux.org/ncurses5-compat-libs.git
cd ncurses5-compat-libs
sudo gpg --recv-keys C52048C0C0748FEE227D47A2702353E0F7E48EDB
makepkg -sic
cd ..
sudo rm -r ncurses5-compat-libs
And guess what, I'm back from where I started...
==> Verifying source file signatures with gpg...
ncurses-6.1.tar.gz ... FAILED (unknown public key 702353E0F7E48EDB)
==> ERROR: One or more PGP signatures could not be verified!
Error downloading sources: ncurses5-compat-libs
Dose any of you guys have any idea how can I fix this problem? If so let me know because I'm getting crazy already not been able to fix this.
You shouldn't need specifically ncurses5-compat-libs if you have a higher version of ncurses. Because version 6 is backwards compatible with version 5. You need to check whether you have libtinfo.so.6 or not. If you have it then you just need to create a system link. Check if you have libtinfo.so.6, so Run:
ls /lib/ | grep libtinfo
if you can't see libtinfo.so.6, you need to install ncurses (the current latest version of it: 6.2) and then create a system link that I mentioned below. so run:
sudo pacman -S ncurses
sudo pacman -S lib32-ncurses
if you have libtinfo.so.6 then run:
sudo link /lib/libtinfo.so.6 /lib/libtinfo.so.5
I went a step further from creating the link in the other answer here:
sudo link /lib/libtinfo.so.6 /lib/libtinfo.so.5
And created a dummy package so I could build something that depended on that being a thing:
$ cat /opt/aur/ncurses5-compat-libs-dummy/PKGBUILD
pkgname='ncurses5-compat-libs'
pkgver=6.1
pkgrel=1
arch=(any)
provides=('libtinfo5')
$ cd /opt/aur/ncurses5-compat-libs/dummy
$ makepkg -si
worked like a charm
I had installed CLion(2016.2.3) IDE from CLion-2016.2.3.tar.gz file. I accidentally deleted the CLion-2016.2.3.tar.gz file and CLion-2016.2.3 folder(which I got after extracting CLion-2016.2.3.tar.gz). Now CLion isn't working. When I ran dpkg --list from terminal, CLion wasn't present in the output. I want to remove CLion completely(all its files, folders, dependencies, etc.(even the configuration files)). How do I remove it completely?
Run the following command in terminal to find all the directories and files containing clion in their name :-
$ sudo find . -iname "*clion*"
Then delete the directories and files you have found.
To delete directories/files, go to the location of that directory/file in terminal using cd and run the following command :-
$ sudo rm -rf DIRECTORY_NAME/FILE_NAME
Simple Steps are :
Delete the clion folder you have downloaded and extracted.
Remove cache in ~/. using the command : sudo rm -r ~/.Clion.
Also need remove settings: /home/user/.config/JetBrains
You need also to remove settings that are stored in ~/. directory. That's it for Unix/Linux.
All Clion's binaries are store inside the folder you deleted.
But Clion sets up preferences at first launch, and you may have a menu icon which is pointing nowhere.
I suggest you run something like find ~ -iname "*clion*" and investigate what is found. If you are using Gnome2 or MATE desktop you will certainly find .desktop files which are the icons you are looking for.
If you used snap to install you can uninstall using
sudo snap remove --purge clion
When creating a react-native app with react-native init MyApp the Android and iOS package names are automatically set to com.myapp.
Changing the Android package name (especially if you need something longer like com.organisation.propject.app) later in the development is pretty fiddly and I was wondering if there was a way to set the package name when setting up a project with react-native init?
Note: it's working only in RN 0.37 and maybe one or two versions up, in 0.40+ this feature was removed.
You need to specify a --package option:
$ react-native init MyApp --package=com.organization.project.app
The below worked for me. Substitute your own app name for "Foo App" and your own package name for org.newpackage.app.
NEW_APP_NAME="Foo App"
NEW_PACKAGE_NAME=org.newpackage.app
OLD_PACKAGE_NAME=org.reactjs.native.example
npx react-native init rndemo && \
cd rndemo && \
npx react-native-rename "${NEW_APP_NAME}" -b ${NEW_PACKAGE_NAME} && \
rm -rf ios/Pods && \
pod install --project-directory=./iOS && \
grep -rl ${OLD_PACKAGE_NAME} * | \
xargs sed -i '.bak' "s/${OLD_PACKAGE_NAME}/${NEW_PACKAGE_NAME}/g"
I've created a gist that does this, prompting interactively for the app name and package name. The gist is a tiny bit more sophisticated, in that (in the above example) it would initially create the app fooapp instead of rndemo.
Explanation:
Create a react-native app. It's called rndemo temporarily; we need to know what it's going to be called so we can change to it.
Run react-native-rename to rename the new project to whatever you specified; this lets us replace the package name too.
Remove the installed cocoa pods and reinstall them (so they'll pick up the new folder locations etc).
Search for the default package name org.reactjs.native.example and replace it with your new package name. Currently this will only find ios/FooApp.xcodeproj/project.pbxproj. The old project.pbxproj file will be saved with a '.bak' extension. This step would probably be better done with find . -name project.pbxproj -exec ..... but this was good enough for my needs.
I am running sudo pacman -Syu on my Arch Linux and I am getting the following:
cristian#localhost:~$ sudo pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
multilib is up to date
xenlism-arch is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for conflicting packages...
error: failed to prepare transaction (could not satisfy dependencies)
:: package-query: requires pacman<4.3
What's the solution to fix this?
UPDATE
I have tried both solutions sugested by #jham. I have completely removed yaourt and package-query. At pacman -Qi pacman at 'required by' I have none. I also commented multilib and xenlism-arch from pacman.conf. When I do pacman -Syu I get the following:
:: Proceed with installation? [Y/n]
(244/244) checking keys in keyring [###################################] 100%
(244/244) checking package integrity [###################################] 100%
error: confuse: signature from "Thorsten Töpper <atsutane#freethoughts.de>" is unknown trust
:: File /var/cache/pacman/pkg/confuse-2.8-2-x86_64.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n]
error: failed to commit transaction (invalid or corrupted package)
Errors occurred, no packages were upgraded.
I just had this very same error. The problem seems to be that there are new keys in the archlinux-keyring package, and new packages (confuse) signed with those keys. Since both packages are updated in the same transaction, well the new keys cannot be used until the update is finished, but the transaction will not start until the packages are checked...
The solution would be to update the archlinux-keyring by itself:
pacman -S archlinux-keyring
And then do the rest:
pacman -Su
If that fails, you could try running through the keys manually, with:
pacman-key --populate
but usually, it is not necessary.
I just happened to have the same problem, and solved it the following way:
$ sudo pacman -Rdd package-query # Purge the conflicting package-query
$ sudo pacman -Syu # There it works
# Now reinstall package-query
$ git clone https://aur.archlinux.org/package-query.git
$ cd package-query && makepkg -si
For anyone else coming in here that didn't find the solution by rorido working, try users Bernhard Fürst's or Jham's answer of just pacman -S package-query which worked for me without issues.
Also, if you are still getting issues like this with libalpm.so.8: cannot open shared object file: No such file or directory then you have to manually reinstall package-query and yaourt.
sudo pacman-db-upgrade
yaourt -R package-query yaourt
git clone https://aur.archlinux.org/package-query.git
cd package-query
makepkg -si
cd ..
git clone https://aur.archlinux.org/yaourt.git
cd yaourt
makepkg -si
cd ..
If you still have an error. Try this:
sudo find /var/cache/pacman/pkg/ -iname "*.part" -exec rm {} \;
It removes .part files, which causes the "invalid or corrupted package" error. After you remove them, run this:
sudo pacman -Syyu
This should solve the problem, if there is no any missing key.
I am using Manjaro and after a long search, I was able to fix the issue by following these simple commands.
NOTE: You must run pacman-key --init before first using pacman; the local
keyring can then be populated with the keys of all official Manjaro Linux
packagers with pacman-key --populate archlinux manjaro.
failed to prepare transaction (invalid or corrupted database)
Here it was due to the actual (faulty) mirror servers delivering junk.
comment out those standard servers and use a quality server e.g.
ftp://ftp5.gwdg.de/pub/linux/archlinux/community/os/x86_64/
Too bad that /etc/pacman.conf is so poorly commented, as if to deliberatly be unhelpful and feckless, always being vague, never concretely helpful.
this was the last error in an seemingly endless ordain of errors from pacman. keys are unmanagable, servers are a mess, libs spell chaos. Took me more than 1 day to get through this horrific Arch experience.
The following is for ArchLinux however applies to other Linux distros too.
To correct an invalid KEY one needs to do the following:
rm -fr /etc/pacman.d/gnupg
pacman-key --init
pacman-key --populate archlinux
say the key throwing an error is in Blackarch then is also needed to :
sudo pacman-key --populate blackarch
and finally
sudo pacman -Sy archlinux-keyring
sudo pacman-key --populate archlinux
sudo pacman-key --refresh-keys
I have recently downloaded GitHub and created a repository on it. I am trying to upload an Objective C project in it. How do I go about doing this?
I didn't find the above answers sufficiently explicit, and it took me some time to figure it out for myself. The most useful page I found was:
http://www.lockergnome.com/web/2011/12/13/how-to-use-github-to-contribute-to-open-source-projects/
I'm on a Unix box, using the command line. I expect this will all work on a Mac command line. (Mac or Window GUI looks to be available at desktop.github.com but I haven't tested this, and don't know how transferable this will be to the GUI.)
Step 1: Create a Github account
Step 2: Create a new repository, typically with a README and LICENCE file created in the process.
Step 3: Install "git" software.
(Links in answers above and online help at github should suffice to do these steps, so I don't provide detailed instructions.)
Step 4: Tell git who you are:
git config --global user.name "<NAME>"
git config --global user.email "<email>"
I think the e-mail must be one of the addresses you have associated with the github account. I used the same name as I used in github, but I think (not sure) that this is not required. Optionally you can add caching of credentials, so you don't need to type in your github account name and password so often. https://help.github.com/articles/caching-your-github-password-in-git/
Create and navigate to some top level working directory:
mkdir <working>
cd <working>
Import the nearly empty repository from github:
git clone https://github.com/<user>/<repository>
This might ask for credentials (if github repository is not 'public'.)
Move to directory, and see what we've done:
cd <repository>
ls -a
git remote -v
(The 'ls' and 'git remote' commands are optional, they just show you stuff)
Copy the 10000 files and millions of lines of code that you want to put in the repository:
cp -R <path>/src .
git status -s
(assuming everything you want is under a directory named "src".) (The second command again is optional and just shows you stuff)
Add all the files you just copied to git, and optionally admire the the results:
git add src
git status -s
Commit all the changes:
git commit -m "<commit comment>"
Push the changes
git push origin master
"Origin" is an alias for your github repository which was automatically set up by the "git clone" command. "master" is the branch you are pushing to. Go look at github in your browser and you should see all the files have been added.
Optionally remove the directory you did all this in, to reclaim disk space:
cd ..
rm -r <working>
Well, there really is a lot to this. I'm assuming you have an account on http://github.com/. If not, go get one.
After that, you really can just follow their guide, its very simple and easy and the explanation is much more clear than mine: http://help.github.com/ >> http://help.github.com/mac-set-up-git/
To answer your specific question: You upload files to github through the git push command after you have added your files you needed through git add 'files' and commmited them git commit -m "my commit messsage"
You need to create a git repo locally, add your project files to that repo, commit them to the local repo, and then sync that repo to your repo on github. You can find good instructions on how to do the latter bit on github, and the former should be easy to do with the software you've downloaded.
To upload files to your repo without using the command-line, simply type this after your repository name in the browser:
https://github.com/yourname/yourrepositoryname/upload/master
and then drag and drop your files.(provided you are on github and the repository has been created beforehand)
Here are the steps (in-short), since I don't know what exactly you have done:
1. Download and install Git on your system: http://git-scm.com/downloads
2. Using the Git Bash (a command prompt for Git) or your system's native command prompt, set up a local git repository.
3. Use the same console to checkout, commit, push, etc. the files on the Git.
Hope this helps to those who come searching here.
if you're on windows:
http://windows.github.com/
otherwise:
http://git-scm.com/downloads/guis
If you want to upload a folder or a file to Github
1- Create a repository on the Github
2- make: git remote add origin "Your Link" as it is described on the Github
3- Then use git push -u origin master.
4- You have to enter your username and Password.
5- After the authentication, the transfer will start