Error: ENOENT: no such file or directory, open 'C:\Users\username\Desktop\vue-tailwind-naive\tailwind.config.js' - vue.js

So I have been trying to install tailwind inside a Vue Project.
I initialized the vue project using:
vue create project-name.
Then I add tailwind as a plugin using the command:
vue add tailwind and then select the minimal option. I suspect the plugin is installed correctly but still I get the below error :
In the package.json, tailwind & autoprefixer can be seen correctly installed. Also postcss.config.js & vue.config.js files have been added successfully & correctly.
But when I run to serve the page, I get this error:
I can't figure out what's going wrong here. Please help.

Try to delete the postcss.config.js then run the following command at the project root :
npx tailwindcss init -p
this command will create postcss.config.js and tailwind.config.js files.

In my case I changed the ("./tailwind.config.js") to ("./tailwind.config.cjs") in postcss.config.cjs plugins

Related

building tailwindcss with Vue3 install for production

I am quite unfamiliar with npm, (I develop in python) and most of the time I just do what the tutorial says. But now I am stuck. I tried Tailwindcss in combination wit 'Vue 3' and followed the install steps from the website:website tailwind+Vue 3
npm init #vitejs/app my-project
cd my-project
npm install
npm install -D tailwindcss#latest postcss#latest autoprefixer#latest
npx tailwindcss init -p
And after adding some HTML and running:
npm run dev
everything works fine in the browser.
But then Iwant to build it for using in production I use
npm run build
and after some processing my dist folder is filled with an index.html and assets.
And here starts my problem. I was expecting that I could copy these files to my server and that it should serve my site. But All I see is a blank page.
I can't find the answer anywhere or others with same problems so I think its something stupid I just don't know. But what is it?
Hope someone can help me...
Try this, maybe something will work
https://dev.to/vonagedev/using-tailwind-css-with-vue-js-b1b
Webpack (and Vue-loader which is a Webpack loader for Vue.js components) can be configured to use PostCSS which is a Webpack loader for CSS.
It will look for the configuration inside a postcss.config.js file and can build the app with CSS from packages you add.
And, configure it using this code.
// postcss.config.js
const autoprefixer = require('autoprefixer');
const tailwindcss = require('tailwindcss');
module.exports = {
plugins: [
tailwindcss,
autoprefixer,
],
};
The demo app is also generated without any CSS assets. Instead, it uses CSS inside the components (which is fine). To include Tailwind CSS, create a CSS asset using your editor or the commands below.
# mkdir -p for making parents they don't exist
mkdir -p src/assets/styles/
touch src/assets/styles/index.css
Now add this code, which adds the various packages of the Tailwind CSS library.
/* src/assets/styles/index.css */
#tailwind base;
#tailwind components;
#tailwind utilities;
```

Why do i get vue-cli errors while setting up a new project

I have npm installed v6.9.0 ,node v10.16.0 & yarn v1.16.0 on my Ubuntu 18.04LTS.
I'm following this tutorial.tutorial link
While I'm initially setting up the Vue app in my directory vuetest and bootstrapping the app using vue-cli, i ran these commands:
yarn global add vue-cli
vue init webpack <webpack_name>
Vue init hanged at project description and this was a issue in github where they posted a temporary solution.
temporary solution link
In the solution they said to run these commands:
1.cd "$(dirname $(which vue))/node_modules/#vue/cli-init"
2.npm i inquirer#~6.3.1
When i ran the first command i get error:
bash: cd: /home/nishanthr/.yarn/bin/node_modules/#vue/cli-init: No such file or directory
Output of which vue is:
/home/nishanthr/.yarn/bin/vue
Can someone tell me what's wrong and what's happening here ?
You should use the new version yarn global add #vue/cli
Vue Cli

how to config webpack in a project created by vue-cli 3?

By using vue-cli 3, I created a project with the following structure:
Then I hope it would support webpack. I tried to add webpack.config.js into build folder, and add script
"webpack --config build/webpack.config.js"
in package.json file.
However it seems that this doesn't work out with an error shows "Error: Cannot find module '/Users/laiyinan/Documents/前端开发/稠行手机银行(个人)/build/webpack.config.js'"
How could I use webpack in vue project? Thanks in advance.

Browserify cannot find xxx from yyy

I am using a plugin called tabulator: http://tabulator.info/docs/4.0/quickstart
Here it is described how to install and require it:
npm install tabulator-tables --save
var Tabulator = require('tabulator-tables');
This I have done, so far so good.
I put the require statement in a seperate js file called main.js
Then in order to be able to use require, I use browserify:
C:\SRC\cars\CARS\node_modules>browserify main.js -o bundle.js
Now I get an error:
Error: Cannot find module 'tabulator-tables' from 'C:\SRC\cars\CARS\node_modules'
at C:\Users\john\AppData\Roaming\npm\node_modules\browserify\node_modules\browser-resolve\node_modules\resolve\lib\async.js:46:17
And I simply cannot understand what I am doing wrong!
Can anyone help me out with this?
There was an issue with the 4.0.2 release over the weekend that accidentally removed the dist directory and is what is causing your problems. if you update to the 4.0.4 release your issue should be fixed
npm update tabulator-tables

React Native: npm link local dependency, unable to resolve module

I am developing a button ui package for react native. I try to build an example project to test this button. The directory structure is as follows:
my-button/
package.json
index.js
example/
package.json
index.js
I try to use npm link:
cd my-button
npm link
cd example
npm link my-button
In example/node_modules/ I can see my-button symlink, VSCode also can auto complete function in my-button package.
But execute example app will show error:
Unable to resolve module my-button ...
Module does not exist in the module map or in these directories: ...
But the path in the error message is correct.
Don't know where I was wrong, or in React-Native have any special way to deal with link local dependency?
I also tried npm install file:../.. It works fine in this way, but not easy to update dependency in example/ after I edited my-button.
The npm link command doesn't work because React Native packager doesn't support symlinks.
After a little research, I discovered that there are two ways to go about it.
Use haul packager in the example app. Haul supports symlinks, so you can use npm link as usual.
Use local dependency via file:../ and then edit files in node_modules folder or reinstall every time you make changes.
I found Haul to work great for this use-case and even set-up a little starter project that also includes storybook, which is really helpful if you have many components to switch between.
Try wml (https://github.com/wix/wml)
It's an alternative to npm link that actually copies changed files from source to destination folders
# add the link to wml using `wml add <src> <dest>`
wml add ~/my-package ~/main-project/node_modules/my-package
# start watching all links added
wml start
I couldn't always make it work with yarn link. What i found extra useful is yalc:
First install it globally once forever:
npm install -g yalc
In the local library/package (i'll call it my-local-package), and run:
yalc publish
Then in your project which uses my-local-package as a dependency, run:
(if you already have added it with any other way, first uninstall it (npm uninstall -S my-lockal-package)
yalc add my-local-package
npm install
If my-local-package is a native module, then run react-native run-android to link the dependency. (or run-ios)
If you make any change in the my-lockal-package, then:
cd path/of/my-local-package
yalc push //updates the local package
cd path/to/my-project
npm install
react-native run-android (or run-ios)
In case the update hasn't been applied, try to cd android && ./gradlew clean && cd .. and then rerun: react-native run-android.
I'm having the same issue while developing a native module wrapper around an existing native SDK. At first I followed #aayush-shrestha's suggestion to install the package locally. Like this:
npm install ../<package-folder> --save
This works as long as I reference the module via NativeModules. Import it:
import { NativeModules } from 'react-native';
And then access a module called ActualModuleName like this:
NativeModules.ActualModuleName
But it fails when I attempt to import the module by name:
import { ActualModuleName } from 'react-native-actualmodulename'
To make that work I had to first pack the package. Run this in the package's root directory:
npm pack
This generates a gzipped tarball:
react-native-actualmodulename-1.0.0.tgz
Now install that in your app:
npm install <path/to>/react-native-actualmodulename-1.0.0.tgz
An enormous downside to this is that you have to re-pack the package every time you make a change to the module. The only workaround I know of is to modify the package's files in node_modules directly and then copy those changes back to your repo when you're done.
But the upside is that your app's source can import ActualModuleName the same way you'll import it once it's released via npm; no environment-specific code necessary.
You can use npm link using Metro. Just add the source folder of the linked package to watchFolders in your metro.config.js.
Ran into the same problem. While I could not make npm link work as it should, I worked around it by installing the local package in the project folder
npm install ../<package-folder> --save
This will install the package like a regular package but from the local folder.
The downside is that the changes you make on the package will not be reflected. You will have to npm install after every change.
Change your package.json
//...
"dependencies": {
//...
"my-button" : "file:../"
},
//...
I also came across this problem. After visiting the below link, I came to know that react- native does not support symlinks.[Click here][1]
However, I have solved this by adding these lines in the metro.config.js file. Please replace your_module_name with your module name.
const path = require('path');
const thirdPartyPath = path.resolve(__dirname + '/../your_module_name/'); // Path of your local module
const thirdParty= {
'your_module_name': thirdPartyPath,
};
const watchFolders = [ thirdPartyPath];
module.exports = {
// existing dependencies
resolver: {
thirdParty,
},
watchFolders
};
I ran into the same problem.
I tried to install a local module using npm, and kept running into the issue of not being able to resolve the module, even though I could see the folder in node_modules and autocomplete of class and method names worked.
I was able to bypass it by installing the local library using yarn instead of npm after seeing this open issue on github. Issue was opened September 2020 and no comment from Facebook as of yet.
This work for me:
step 1 go to package:
npm link packageNameHere
This will link this package to global node_module
step 2 go to directory which you want to use this package and run these
npm link pathToPackageDirectory
npm install pathToPackageDirectory
ex: npm link ~/myDemoPackage
This will link global node_moudle to this project
If you want to import package to file, USE FILE PATH INSTEAD OF PACKAGE NAME !
ex:
my package name is stripe-api-helper. my code are in src/index.ts
then I need to resolve like this:
import { postStripe, Item } from '#aliciaForDemo/stripe-api-helper/src'
if u use '#aliciaForDemo/stripe-api-helper' it will fail.
Could never get my own environment working using any other suggestions, but found a hack that works well (though not ideal) that can be easily set up in just a few lines of code and without changing your RN project configuration.
Use fs.watch for changes recursively in the directory where you're working on your library, and copy the updates over whenever there's been a change:
import fs from 'fs'
const srcDir = `./your-library-directory`
const destDir = `../your-destination-directory`
fs.watch("./src/", {recursive: true}, () => {
console.log('copying...')
fs.cp(srcDir, destDir, { overwrite: true, recursive: true }, function() {
console.log('copied')
})
})
For those still looking for a simple solution without other dependency, try this:
yarn --version
1.21.1
npm --version
6.13.4
Install in project root
cd my-button
yarn install or npm install
register linking in my-button
yarn link or npm link
Install example project
cd example
yarn add ../ or npm add ../
link to my-button
yarn link my-button or npm link my-button
complete pod installation (if necessary)
cd ios
pod install
Try to run
npm run watch
inside the button package. Currently, I'm using this to apply changes from the library to my main project. Please let me know if it works!