I am getting the following error from DB2, using custom driver: com.ibm.as400.access.AS400JDBCDriver
Error executing sql statement: [SQL0104] Token ) was not valid. Valid tokens: , FROM INTO.; Caused by: [SQL0104] Token ) was not valid. Valid tokens: , FROM INTO.
Narrowed it down to this bit which works in SQL server, we are a bit stumped as syntax appears fine.
SELECT CASE
WHEN Abs(ho.ohmisc) > 0
THEN
(
SELECT LEFT(s, Translate('%[^0-9]%', s) - 1)
FROM (
SELECT Substr(
ohunpo,
Translate('%[0-9]%', ohunpo),
Len(ohunpo)
) AS s
) t
)
ELSE odrord
END ODRORD
FROM qs36f.hoehead HO
QS36F.hoehead HO
You are missing a FROM
SELECT CASE
WHEN Abs(ho.ohmisc) > 0
THEN
(
SELECT LEFT(s, Translate('%[^0-9]%', s) - 1)
FROM (
SELECT Substr(ohunpo,
Translate('%[0-9]%', ohunpo),
Len(ohunpo)
) AS s
-- **You need a FROM here**
) t
)
ELSE odrord
END ODRORD
FROM qs36f.hoehead HO
QS36F.hoehead HO
But that's not your only issue...
This is not valid either, are you trying to join the table to itself?
FROM qs36f.hoehead HO
QS36F.hoehead HO
Your embedded selects likely aren't right either....but without knowing your table structure and seeing some example source data and what you're wanting as output, I can't say for sure.
Related
Trying to make a select query on teradata, but i get this message error:
syntax error: invalid select expression list
I can't fix it. How can I formulate the query appropriately?
SELECT BILS01_GRADO, BILS01_CODICE_COM, BILS01_PROT, BILS01_PROG_OGG_IMP,BILS01_PROG_REC,
CASE WHEN BILS01_DATA_PRES_ISTSOSP<TO_DATE('9999-12-31','YYYY-MM-DD') AND BILS01_CTR_IST_SOSP=0 THEN BILS01_DATA_PRES_ISTSOSP
WHEN BILS01_DATA_PRES_ISTSOSP=TO_DATE('9999-12-31','YYYY-MM-DD') AND BILS01_CTR_IST_SOSP>0 THEN DATA_CONTROVERSIA2
WHEN BILS01_DATA_PRES_ISTSOSP=TO_DATE('9999-12-31','YYYY-MM-DD') AND BILS01_CTR_IST_SOSP=0 THEN TO_DATE('9999-12-31','YYYY-MM-DD')
WHEN BILS01_DATA_PRES_ISTSOSP<
(
CASE WHEN
(
CASE WHEN BILS01_DATA_SPED<to_date('9999-12-31','YYYY-MM-DD') THEN BILS01_DATA_SPED
WHEN BILS01_DATA_SPED=to_date('9999-12-31','YYYY-MM-DD') OR BILS01_DATA_RIC<to_date('9999-12-31','YYYY-MM-DD')THEN BILS01_DATA_RIC
WHEN BILS01_DATA_ACQ<to_date('9999-12-31','YYYY-MM-DD') THEN BILS01_DATA_ACQ ELSE BILS01_DATA_PROT END AS DATA_CONTROVERSIA
)
<TO_DATE('1972-01-01','YYYY-MM-DD') THEN TO_DATE('1972-01-01','YYYY-MM-DD') ELSE DATA_CONTROVERSIA END AS DATA_CONTROVERSIA2
)
THEN BILS01_DATA_PRES_ISTSOSP ELSE DATA_CONTROVERSIA2 END AS A) AS OUT_DATA_RICH_SOSP
FROM zucow.BILS01
--GROUP BY BILS01_GRADO, BILS01_CODICE_COM, BILS01_PROT, BILS01_PROG_OGG_IMP,
-- BILS01_PROG_REC, OUT_DATA_RICH_SOSP
SELECT CASE (SELECT Count(1)
FROM wf_item_activity_statuses_v t
WHERE t.activity_label IN ('WAITING_DISB_REQ',
'LOG_DDE',
'LOG_SENDBACK_DDE')
AND t.item_key IN(
SELECT r.i_item_key
FROM wf_t_item_xref r
WHERE r.sz_appl_uniqueid = '20400000988')
)
WHEN 0 THEN
(
delete
from t_col_val_document_uploaded p
WHERE p.sz_application_no = '20400000988'
AND p.sz_collateral_id = 'PROP000000000PRO1701'
AND p.i_item_key = '648197'
AND p.i_document_srno = '27' )
WHEN 1 THEN
(
DELETE
FROM t_col_val_document_uploaded p
WHERE p.sz_application_no = '20400000988'
AND p.sz_collateral_id = 'PROP000000000PRO1701'
AND p.i_document_srno = '28' )
ELSE NULL
END
FROM dual;
You need to recreate your query and make sure to follow the flow of the clauses properly, please check the next two links to get a better understanding :
[ORA-00936: missing expression tips]
How do I address this ORA-00936 error?
Answer: The Oracle oerr utility notes this about the ORA-00936 error:
ORA-00936 missing expression
Cause: A required part of a clause or expression has been omitted. For example, a SELECT statement may have been entered without a list of columns or expressions or with an incomplete expression. This message is also issued in cases where a reserved word is misused, as in SELECT TABLE.
Action: Check the statement syntax and specify the missing component.
The ORA-00936 happens most frequently:
1 - When you forget list of the column names in your SELECT statement.
2. When you omit the FROM clause of the SQL statement.
ora-00936-missing-expression
I hope this can help you.
You cannot use a simple select query like this. You have to use a PL/SQL block like below -
DECLARE NUM_CNT NUMBER := 0;
BEGIN
SELECT Count(1)
INTO NUM_CNT
FROM wf_item_activity_statuses_v t
WHERE t.activity_label IN ('WAITING_DISB_REQ',
'LOG_DDE',
'LOG_SENDBACK_DDE')
AND t.item_key IN(SELECT r.i_item_key
FROM wf_t_item_xref r
WHERE r.sz_appl_uniqueid = '20400000988');
IF NUM_CNT = 0 THEN
delete
from t_col_val_document_uploaded p
WHERE p.sz_application_no = '20400000988'
AND p.sz_collateral_id = 'PROP000000000PRO1701'
AND p.i_item_key = '648197'
AND p.i_document_srno = '27';
ELSIF NUM_CNT = 1 THEN
DELETE
FROM t_col_val_document_uploaded p
WHERE p.sz_application_no = '20400000988'
AND p.sz_collateral_id = 'PROP000000000PRO1701'
AND p.i_document_srno = '28' )
END IF;
END;
How to run procedure without parameter in Teradata
I'm trying with : call db1.proc_dbOSA()
Error Msg:
Call failed 3707: PROC_DBOSA: Syntax error, expected something
like a name or a Unicode delimited identifier between ‘(‘ and ‘)’
New Procedure with error result.
When i run only code then everything works ok.
REPLACE PROCEDURE db1.proc_dbOSA()
BEGIN
DELETE FROM db1.LOG_dbOSA;
INSERT INTO
db1.LOG_dbOSA
(StoreNo, IDX, Flow, Status, MRP, OSA_IDX, OSA_AC)
WITH a AS (
SELECT
c.StoreCode,
CAST(SUBSTRING(c.ArticleCode FROM 13 FOR 6) AS INT) AS IDX,
RpType,
CASE
WHEN c.MinimumTargetStockWrpl >= l.MinimumTargetStockWrpl THEN CAST(l.MinimumTargetStockWrpl AS INT)
WHEN c.MinimumTargetStockWrpl < l.MinimumTargetStockWrpl THEN CAST(c.MinimumTargetStockWrpl AS INT)
End AS StoreMin,
c.ValUnrestrictedStock
FROM
db1.tab1 c
INNER JOIN
(
SELECT
StoreCode,
ArticleCode,
MinimumTargetStockWrpl
FROM
db1.tab1
WHERE
ProcessingDate = CURRENT_DATE - 14
) l ON c.StoreCode = l.StoreCode AND c.ArticleCode = l.ArticleCode
WHERE
c.ProcessingDate = CURRENT_DATE AND c.MinimumTargetStockWrpl IS NOT NULL AND l.MinimumTargetStockWrpl IS NOT NULL AND l.MinimumTargetStockWrpl > 0
)
, t AS
(
SELECT
CAST(SUBSTRING(ArticleCode FROM 13 FOR 6) AS INT) AS IDX,
RpType,
ArticlesPlanner
FROM
DWH_db_V.STK_B_ARTICLE_DAY_V
WHERE
ProcessingDate = CURRENT_DATE AND StoreCode = 'DR04'
)
SELECT
a.StoreCode,
a.IDX,
t.RpType,
t.ArticlesPlanner,
a.RpType,
CASE
WHEN a.ValUnrestrictedStock > 0 THEN 1
WHEN a.ValUnrestrictedStock <= 0 THEN 0
End AS OSA_IDX,
CASE
WHEN a.ValUnrestrictedStock >= StoreMin THEN 1
WHEN a.ValUnrestrictedStock < StoreMin THEN 0
End AS OSA_AC
FROM
a
LEFT JOIN
t ON t.IDX = a.IDX;
End;
BTEQ Error:
+---------+---------+---------+---------+---------+---------+---------+----
Call proc_dbOSA;
Call proc_dbOSA;
$
* Failure 3707 Syntax error, expected something like '(' between the word
'proc_dbOSA' and ';'.
Statement# 1, Info =18
* Total elapsed time was 1 second.
Call proc_dbOSA();
* Failure 3707 PROC_DBOSA:Syntax error, expected something like a name or
a Unicode delimited identifier between '(' and ')'.
* Total elapsed time was 1 second.
Stored procedures do not support the following:
EXPLAIN and USING request modifiers within a stored procedure
EXECUTE macro statement
WITH clause within a stored procedure.
Stored procedures, as well as macros, do not support the following query logging statements:
BEGIN QUERY LOGGING
END QUERY LOGGING
FLUSH QUERY LOGGING
REPLACE QUERY LOGGING
I have a problem with a function in db2
The function finds a record, and returns a number according to whether the first and second recorded by a user
The query within the function is this
SELECT
CASE
WHEN NUM IN (1,2) THEN 5
ELSE 2.58
END AS VAL
FROM (
select ROW_NUMBER() OVER() AS NUM ,s.POLLIFE
from LQD943DTA.CAQRTRML8 c
INNER JOIN LSMODXTA.SCSRET s ON c.MCCNTR = s.POLLIFE
WHERE s.NOEMP = ( SELECT NOEMP FROM LSMODDTA.LOLLM04 WHERE POLLIFE = '0010111003')
) AS T WHERE POLLIFE = '0010111003'
And works perfect
I create the function with this code
CREATE FUNCTION LIBWEB.BNOWPAPOL(POL CHAR)
RETURNS DECIMAL(7,2)
LANGUAGE SQL
NOT DETERMINISTIC
READS SQL DATA
RETURN (
SELECT
CASE
WHEN NUM IN (1,2) THEN 5
ELSE 2.58
END AS VAL
FROM (
select ROW_NUMBER() OVER() AS NUM ,s.POLLIFE
from LQD943DTA.CAQRTRML8 c
INNER JOIN LSMODXTA.SCSRET s ON c.MCCNTR = s.POLLIFE
WHERE s.NOEMP = ( SELECT NOEMP FROM LSMODDTA.LOLLM04 WHERE POLLIFE = POL)
) AS T WHERE POLLIFE = POL
)
The command runs executed properly
WARNING: 17:55:40 [CREATE - 0 row(s), 0.439 secs] Command processed.
No rows were affected
When I want execute the query a get a error
SELECT LIBWEB.BNOWPAPOL('0010111003') FROM DATAS.DUMMY -- dummy has only one row
I get
[Error Code: -204, SQL State: 42704] [SQL0204] BNOWPAPOL in LIBWEB
type *N not found.
I detect, when I remove the parameter the function works fine!
With this code
CREATE FUNCTION LIBWEB.BNOWPAPOL()
RETURNS DECIMAL(7,2)
LANGUAGE SQL
NOT DETERMINISTIC
READS SQL DATA
RETURN (
SELECT
CASE
WHEN NUM IN (1,2) THEN 5
ELSE 2.58
END AS VAL
FROM (
select ROW_NUMBER() OVER() AS NUM ,s.POLLIFE
from LQD943DTA.CAQRTRML8 c
INNER JOIN LSMODXTA.SCSRET s ON c.MCCNTR = s.POLLIFE
WHERE s.NOEMP = ( SELECT NOEMP FROM LSMODDTA.LOLLM04 WHERE POLLIFE = '0010111003')
) AS T WHERE POLLIFE = '0010111003'
)
Why??
This statement:
SELECT LIBWEB.BNOWPAPOL('0010111003') FROM DATAS.DUMMY
causes this error:
[Error Code: -204, SQL State: 42704] [SQL0204] BNOWPAPOL in LIBWEB
type *N not found.
The parm value passed into the BNOWPAPOL() function is supplied as a quoted string with no definition (no CAST). The SELECT statement assumes that it's a VARCHAR value since different length strings might be given at any time and passes it to the server as a VARCHAR.
The original function definition says:
CREATE FUNCTION LIBWEB.BNOWPAPOL(POL CHAR)
The function signature is generated for a single-byte CHAR. (Function definitions can be overloaded to handle different inputs, and signatures are used to differentiate between function versions.)
Since a VARCHAR was passed from the client and only a CHAR function version was found by the server, the returned error fits. Changing the function definition or CASTing to a matching type can solve this kind of problem. (Note that a CHAR(1) parm could only correctly handle a single-character input if a value is CAST.)
I have a query that i'd like to have display "0" if the "Tip" is "NULL" otherwise just display the tip. This is my query:
SELECT t1.sName ,
t1.sLocationDesc ,
t1.sOtherNumber ,
t1.RegHours ,
t1.OTHours ,
CASE
WHEN t2.EmployeeHours / t3.DepartmentHrs * #Tip IS NULL THEN 0
ELSE t2.EmployeeHours / t3.DepartmentHrs * #Tip
END AS Tip
I receive an error:
Incoming Tabular data stream (TDS) remote procedure call (RPC)
protocal stream is incorrect. Parameter 3 ("#Tip") User-defined type
has an invalid user type specified..
Any help here?
Why do you want to use case
just try this
SELECT t1.sName,
t1.sLocationDesc,
t1.sOtherNumber,
t1.RegHours,
t1.OTHours,
ISNULL(t2.EmployeeHours / t3.DepartmentHrs * #Tip,0) AS 'Tip'
BTW I feel the error is not due to your case statement
Try this:
SELECT t1.sName, t1.sLocationDesc, t1.sOtherNumber, t1.RegHours, t1.OTHours,
CASE WHEN (#Tip IS NULL OR #Tip=0) THEN 0 ELSE
t2.EmployeeHours/t3.DepartmentHrs * #Tip END AS Tip