I want to change log4j version from 2.8.2 to 2.17.2 for fix vulnerable. I have changed the jars underneath of mule-enterprise-standalone-3.9.4\lib\boot but i am getting below error.
Please advise what else need to to changed.
I have added below jars though i'm getting below error.
log4j-slf4j-impl-2.17.2 ,
log4j-jul-2.17.2 ,
log4j-jcl-2.17.2 ,
log4j-api-2.17.2 ,
log4j-1.2-api-2.17.2
I have referenced the question : log4j2 for MULE 3 CE patch update
Java HotSpot(TM) 64-Bit Server VM warning: ignoring option PermSize=1024m; support was removed in 8.0
Java HotSpot(TM) 64-Bit Server VM warning: ignoring option MaxPermSize=1024m; support was removed in 8.0
Java HotSpot(TM) 64-Bit Server VM warning: Using the ParNew young collector with the Serial old collector is deprecated and will likely be removed in a future release
Exception in thread "main" java.lang.NoSuchMethodError: com.lmax.disruptor.dsl.Disruptor.<init>(Lcom/lmax/disruptor/EventFactory;ILjava/util/concurrent/ThreadFactory;Lcom/lmax/disruptor/dsl/ProducerType;Lcom/lmax/disruptor/WaitStrategy;)V
at org.apache.logging.log4j.core.async.AsyncLoggerConfigDisruptor.start(AsyncLoggerConfigDisruptor.java:212)
at org.apache.logging.log4j.core.config.AbstractConfiguration.start(AbstractConfiguration.java:303)
at org.apache.logging.log4j.core.LoggerContext.setConfiguration(LoggerContext.java:621)
at org.apache.logging.log4j.core.LoggerContext.reconfigure(LoggerContext.java:694)
at org.apache.logging.log4j.core.LoggerContext.reconfigure(LoggerContext.java:711)
at org.apache.logging.log4j.core.LoggerContext.start(LoggerContext.java:253)
at org.apache.logging.log4j.core.impl.Log4jContextFactory.getContext(Log4jContextFactory.java:155)
at org.apache.logging.log4j.core.impl.Log4jContextFactory.getContext(Log4jContextFactory.java:47)
at org.apache.logging.log4j.LogManager.getContext(LogManager.java:196)
at org.apache.logging.log4j.spi.AbstractLoggerAdapter.getContext(AbstractLoggerAdapter.java:137)
at org.apache.logging.slf4j.Log4jLoggerFactory.getContext(Log4jLoggerFactory.java:55)
at org.apache.logging.log4j.spi.AbstractLoggerAdapter.getLogger(AbstractLoggerAdapter.java:47)
at org.apache.logging.slf4j.Log4jLoggerFactory.getLogger(Log4jLoggerFactory.java:33)
at org.slf4j.LoggerFactory.getLogger(LoggerFactory.java:358)
at org.slf4j.LoggerFactory.getLogger(LoggerFactory.java:383)
at org.mule.module.boot.LicenseKeyHandler.<clinit>(LicenseKeyHandler.java:23)
at org.mule.module.reboot.MuleContainerBootstrap.handleLicenseKey(MuleContainerBootstrap.java:221)
at org.mule.module.reboot.MuleContainerBootstrap.main(MuleContainerBootstrap.java:69)
JVM exited while loading the application.
Mule versions are developed with a specific log4j2 target version. Changing the version directly can lead to unpredictably errors like you are experiencing. To avoid the vulnerabilities in log4j2 without having compatibility issues you need to follow the instructions in MuleSoft Help Center that are available to Enterprise Edition customers. Note that the version that you are using is an Enterprise Edition release, not a Community Edition release. Alternatively downloading the last released build for your version may already incorporate the patches to fix the vulnerabilities. Although I would recommend to use Mule 3.9.5 since it is the final release of Mule 3.x and has additional bug fixes compared to 3.9.4.
Related
We have a product that is running fine with JBoss 4.2.2/java 7.
We are now moving to JDK 11. simply added java 11 in the classpath and tried starting the server.
Encountered below error
OpenJDK 64-Bit Server VM warning: Ignoring option MaxPermSize; support was removed in 8.0
-Djava.endorsed.dirs=C:\PathBuilder\GE\EMEA\vp\jboss\lib\endorsed is not supported. Endorsed standards and standalone APIs in modular form
will be supported via the concept of upgradeable modules.
removed below configurations from run.bat and started the server again
-XX:MaxPermSize=128m
"-Djava.endorsed.dirs=%JBOSS_ENDORSED_DIRS%"
now getting below error and which is
interrupting the ear deployment Caused by:
java.lang.ClassNotFoundException: No ClassLoaders found for:
org.omg.CORBA.Object
Is Java 4.2.2 compatible with JDK 11 or we need to update JBoss to 7.2 or latest versions?
can someone help with this or provide related links?
JBoss 4.2 is a very old and outdated version and it only tested with JDK 1.5 and 1.6 version. If you are upgrading your JDK to 11 then you should update the JBoss to 7.3 version which is the latest available GA release from Red Hat.
You can download the jdk files of older versions like jdk6 and then replace JAVA path in the jboss run file from "set JAVA=%JAVA_HOME%\bin\java" to
"set JAVA=C:\Users\jdk1.6.0_45\bin\java"
Of course it's better to upgrade to a higher JBoss version... But in case that's not possible, you can avoid the ClassNotFoundException for org.omg.CORBA.Object by placing rt.jar from Java 8 in your JBoss-libs folder.
With this configuration you can run older JBoss versions with Java 11.
I was trying to install the ZAP proxy in my parrot home OS, but I'm unable to install it and the error that I'm receiving in the terminal is as follows:
(A fatal error has been detected by the Java Runtime Environment:
SIGBUS (0x7) at pc=0x00007f904544b12f, pid=6446, tid=6447JRE version: OpenJDK Runtime
Environment (11.0.5+10) (build 11.0.5+10-post-Debian-2)
Java VM: OpenJDK 64-Bit Server VM (11.0.5+10-post-Debian-2, mixed mode, sharing, tiered,
compressed oops, g1 gc, linux-amd64)
Problematic frame:
V [libjvm.so+0xcce12f]
No core dump will be written. Core dumps have been disabled. To enable core dumping, try "ulimit -c unlimited" before starting Java again
If you would like to submit a bug report, please visit:
(https://bugs.debian.org/openjdk-11)
Aborted
This error message...
(A fatal error has been detected by the Java Runtime Environment:
SIGBUS (0x7) at pc=0x00007f904544b12f, pid=6446, tid=6447JRE version: OpenJDK Runtime
Environment (11.0.5+10) (build 11.0.5+10-post-Debian-2)
Java VM: OpenJDK 64-Bit Server VM (11.0.5+10-post-Debian-2, mixed mode, sharing, tiered,
compressed oops, g1 gc, linux-amd64)
Problematic frame:
V [libjvm.so+0xcce12f]
...implies that the V frame was the Problematic frame which crashed which resulted in libjvm.so file.
The crash you observed is possibly not a zap or java issue but a debian issue.
Deep Dive
However as per the documentation in What versions of Java are supported? page, ZAP should be able to run with all/newer Java versions, but might require a minimum for certain ZAP versions:
ZAP 2.7.0 and later requires a minimum of Java 1.8
ZAP 2.0.0 and later requires a minimum of Java 1.7
Previous versions of ZAP also support Java 1.6, the last of those being 1.4.1
Additionally, as per the documentation in Download ZAP page:
The Windows and Linux versions require Java 8 or higher to run.
The macOS version includes Java 8 - you can use the Linux or Cross Platform versions if you do not want to download this.
Finally, as per the documentation in Release 2.9.0 page:
This is a bug fix and enhancement release, which requires a minimum of Java 8. Note that a minimum of Java 11 is recommended, especially for high DPI displays.
References
You can find a couple of relevant discussions in:
Jvm crash :fatal error has been detected by the Java Runtime Environment
“A fatal error has been detected by the Java Runtime Environment” when running java project on another computer
A fatal error has been detected by the Java Runtime Environment (SIGBUS (0x7))
JVM crashes with problematic frame [libjvm.so+0x7f582e] PerfLongVariant::sample()+0x1e
jvm terminated exit code 8096 is shown
here follows my eclipse.ini coding
-vm
C:\Program Files (x86)\IBM\SDP70\jdk\jre\bin\javaw.exe
-vmargs
-Xquickstart
-Xms512m
-Xmx1024ms
-Xgcpolicy:gencon
-Xscmx96m
-Xshareclasses:singleJVM,keep
-Xnolinenumbers
-XX:MaxPermSize=1024M
-Dsun.java2d.d3d=false
-Dsun.java2d.noddraw=true
This behavior might be caused by the incorrect rendering on a small set of Microsoft Windows computers with bad DirectDraw or Direct3D drivers. Hence, the use of DirectDraw or Direct3D drivers by Java 2D system in Rational Application Developer v7 can cause the crash.
Note: This error is not always caused as the result of DirectDraw or Direct3D drivers.
Resolving the problem
Consider upgrading to the latest Rational Application Developer v7.0.x release before carrying out the option of disabling Direct3D.
In the case of Rational Application Developer v8.0 or later versions on a Windows 64-bit platform experiencing this JVM error, consult the technote "Internet Explorer v9 or higher is required if the product was installed using the 64-bit Bit Mode option on a 64-bit system". This addresses the jscript.dll error showing in a javacore.
You can also try clearing the temp folder as described in the following forum post. The workaround presented is for Lotus Notes, but may also apply in this case.
WORKAROUND:
To turn off the use of Direct3D in Rational Application Developer v7, you can use the following Java parameter option:
-Dsun.java2d.d3d=false
If that does not solve the problems, try removing DirectDraw or Direct3D completely using:
-Dsun.java2d.noddraw=true
Note: You can put this Java parameter option inside the eclipse.ini in the directory \SDP70\
Open a service request with IBM support if none of the suggestions above have helped to resolve the problem.
Reference Click Here
Configuration: Eclipse (Juno) 4.2.2
IBM Worklight version: 6.2.0.01
Java version:
java version "1.7.0_71"
Java(TM) SE Runtime Environment (build 1.7.0_71-b14)
Java HotSpot(TM) 64-Bit Server VM (build 24.71-b01, mixed mode)
JDK: jdk1.7.0_71.jdk
Java Compiler: 1.7
My worklight studio was previously working and suddenly stops working after I had to force quit my eclipse. Even after reinstallation of the plugins, the error still recurs.
Here's a screenshot of the initial error log before 'Worklight server failed to start' and 'Failed to deploy application in the worklight server'. Any help to fix this issue will be deeply appreciated. Worklight studio issues like this is starting to get frustrating.
I uninstalled java from my mac. Reinstalled Java (JDK & JRE), new Eclipse (Juno 4.2.2) -> Then installed IBM Worklight Studio plugin. Figured it was the problem with Java as it was throwing the java exception 'unable to read the manifest'. Probably there was some issue after updating to Yosemite.
I had the same problem. You need to set correct IP for Worklight server. It doesn't work with "localhost" or "*".
It looks Java EE got corrupted somehow,
So as suggested the best approach would be to use a fresh Eclipse instance with a new plug-in installation and a new workspace as well. This way it makes sure everything is fresh and new.
I know that the title is almost identical to other questions, but, I've not been able to resolve my problem with those answers.
This is the problem:
I have 2 almost identical projects (one has been cloned from the other with mercurial) and some changes have been made.
After the last pull from the original project, the following error appears when I try to run the project. I know that means that the project is being compiled with java7 and run with java6.
Exception in thread "main" java.lang.UnsupportedClassVersionError: com/[...]/Start : Unsupported major.minor version 51.0
The original project keeps running normally.
It runs if I change the Java Platform in the project properties to java7, but I need the project to run on java6, so that's not an option.
Product Version: NetBeans IDE 7.2 (Build 201207171143)
Java: 1.6.0_35; Java HotSpot(TM) 64-Bit Server VM 20.10-b01
System: Linux version 3.2.0-32-generic running on amd64; UTF-8; en_US (nb)
Thanks for your help!
You can add more than 1 jdk to your environment and you can decide which one to use. try to add the jdk 6 and compile it based on that.