I followed this tutorial but at the end I got an 404 Not Found.
http://localhost:8080/TomEE_war_exploded/
The requested resource [/TomEE_war_exploded/] is not available
In Intellij I don't see a mistake. The Apache Tomee runs under windows in ~/software/apache-tomee-plume-8.0.11 and the code in ~/playground/TomEE
Unfortuately I'm not able to understand how the war file will be copied to the ~/software/apache-tomee-plume-8.0.11/webapps directory or where the configuration error exists.
From the log file I'm not really sure that the deployment happend correct:
30-May-2022 16:49:53.486 WARNING [http-nio-8080-exec-4] org.apache.batchee.container.services.ServicesManager.init You didn't specify org.apache.batchee.jmx.application and JMX is already registered, skipping
30-May-2022 16:49:53.486 INFO [http-nio-8080-exec-4] org.apache.openejb.assembler.classic.Assembler.createApplication Deployed Application(path=/home/maggus/playground/TomEE/target/TomEE-1.0-SNAPSHOT)
30-May-2022 16:49:53.664 INFO [http-nio-8080-exec-4] org.apache.jasper.servlet.TldScanner.scanJars At least one JAR was scanned for TLDs yet contained no TLDs. Enable debug logging for this logger for a complete list of JARs that were scanned but no TLDs were found in them. Skipping unneeded JARs during scanning can improve startup time and JSP compilation time.
[2022-05-30 04:49:53,804] Artifact TomEE:war exploded: Artifact is deployed successfully
[2022-05-30 04:49:53,804] Artifact TomEE:war exploded: Deploy took 823 milliseconds
Does anybody see the mistake?
Thanks,
Markus
I ran into somewhat similar problem today and after sometime I was able to figure it out that it does not deploy at the following Application Context that is configured under Deployment tab in Run/Debug Configurations.
/TomEE_war_exploded
If you try to access http://localhost:8080/TomEE_war_exploded/, it gives 404.
Instead, (in my case) it is accessible at http://localhost:8080/TomEE-1.0-SNAPSHOT/
Where 1.0-SNAPSHOT is the version number defined in pom.xml.
Now in order to find the exact path where it is deployed, you need to go to Tomcat Web Application Manager at the following address:
http://localhost:8080/manager/html
Replace 8080 with the port number on which TomEE is running on your machine.
Default user & password is tomee.
Look under Path and you'll find it. Just click on it, it will be accessible.
I hope it helps.
EDIT: The Workaround
In order to define your own path, you need to update the path in the Artifact Output Directory. See the attached photo.
Related
I want to use JavaMelody to monitor the SQL requested by a Glassfish Application Server. There are step-by-step instructions on https://github.com/javamelody/javamelody/wiki/UserGuideAdvanced#monitoring-of-sql-requests-and-of-jdbc-connections-in-glassfish-v3
I followed the instructions (I didn't download javamelody-objectfactory.jar but used javamelody-core-1.54.0.jar instead) and I get this error when clicking on the refresh button (javamelody web page) :
server.log :
exception while collecting data
java.lang.NoClassDefFoundError: org/jrobin/core/RrdException
at net.bull.javamelody.Collector.getCounterJRobin(Collector.java:836)
at net.bull.javamelody.Collector.collectJRobinValues(Collector.java:489)
...
any idea how to resolve this ?
jrobin-1.5.9.1.jar is installed in the lib folder of glassfish (and in my ear project).
thanks !
javamelody-objectfactory.jar (java source included in the jar) and javamelody-core jar file are absolutely different things. The first is to make the datasource monitorable in Glassfish and the second is the monitoring tool itself.
First fix the exception. You should probably put javamelody-core jar and jrobin jar files in your ear project (and not one in lib folder of Glassfish and one in ear).
Then if the monitoring reports don't include SQL monitoring for the datasource declared in Glassfish, use the javamelody-objectfactory.jar including all steps as said in the doc.
After going through Maven commands on my project, importing the WAR file onto the webapps folder on Tomcat, I'm greeted with a FAIL - Application at context path / could not be started. My WAR file is a ROOT.WAR. Is this a problem with Tomcat's XML configuration? Here's my log of errors, I have no clue which is the crucial error to address.
Here's the console log from Eclipse trying to start the Tomcat server.
http://pastebin.com/JMZqWKhF
Did you actually look at the logfile you posted? The first stacktrace in the incomplete logfile contains:
Caused by: java.nio.file.NoSuchFileException: C:\Program%20Files\Apache%20Software%20Foundation\Tomcat%208.0\webapps\ROOT\WEB-INF\classes\GeoLite2-City.mmdb.gz
...
at com.pethers.afriqcart.service.geoip.CityDatabaseLookupService.loadExternalDatabase(CityDatabaseLookupService.java:59)
at com.pethers.afriqcart.service.geoip.CityDatabaseLookupService.<init>(CityDatabaseLookupService.java:40)
I've omitted a few irrelevant lines, maybe this helps identifying this cause?
As there seems to be a lot more missing from the top of the log it might only be a secondary problem - but that'd be your own problem then... Read your logs
I tried to follow the war generation instructions by changing the warName in build.gradle to moqui-plus-runtime.war and running gradle addRuntime and then gradle deployTomcat. There were no errors in the war build and I checked to see that the war file got installed as ROOT. I did not make any other changes (still using MoquiDevConf and I already had other system parameters in MoquiInit.properties.)
When I startup tomcat8, I don't see any errors in the log file and it says that it is loading moqui-plus-runtime, but when I make any request in the browser, the localhost_access... log shows 404 for any request.
Can you tell me what things I might of missed or how I would go about debugging this - there is very little info in the log files other than the 404 messages.
I followed the following steps to deploy to a Tomcat instance on the same machine. This is from memory as my production machine is currently offline for the next couple of weeks.
Edit tomcatHome to point to correct location
I personally run a gradle cleanAll first to remove old WARs etc
Run gradle build
Optionally run gradle loadProduction to load the production database, alternatively you can run java -Dmoqui.conf=conf/MoquiProductionConf.xml -jar moqui-1.5.3.war -load -types=seed,seed-initial so that you can pick which data types you want to load into production etc.
Stop Tomcat from running, probably optional but the next step deletes files & folders from a deployed tomcat instance.
Run gradle addRuntimeTomcat this task adds your runtime and also copies over the completed WAR into the Tomcat webapps directory if you set the location correctly in step 1.
Start Tomcat
Check Tomcat logs for any startup errors
Hope this helps
Hello worklight team and devs!
We are done working on our development project and everything works fine in the local dev server (Tomcat).
Now we are trying to build the project to be deployed to a testing WAS ND 8.0.3 server.
We've been following the manual in the infocenter and modified each required file as needed (worklight.properties and application-descriptor.xml)
We made this changes to the worklight.properties file:
publicWorkLightHostname=working.hostname.com
# http or https
publicWorkLightProtocol=http
# For default port leave empty
publicWorkLightPort=ourport
publicWorkLightContext=/worklight
wl.db.jndi.name=jdbc/WorklightDS
wl.db.type=DB2
wl.db.url=jdbc:db2:Worklight
wl.db.username=wluser
wl.db.password=passwd
We tested the jdbc source in the WAS console and it works perfectly.
We proceed to build the war, adapter and wlapp (ALL) and we get this error:
[2013-05-21 12:48:44] FWLSE4001W: Failed to resolve JNDI name: "jdbc/WorklightDS".
Application may fail to access the database in runtime. If building for remote server - ignore this warning.
[2013-05-21 12:48:44] FWLST0011E: ====== Worklight Project BPMWorklight-project-customization failed to start: Need to specify class name in environment or system property, or as an applet parameter, or in an application resource file: java.naming.factory.initial
[2013-05-21 12:48:44] Activation failed. Bundle didn't start:C:pathto\BPMWorklight-customization.jar
This happens in the developer workstation and if we install Studio in the server, where the jdbc source is created, the same happens.
I guess that Worklight is trying to "obtain" a JDBC source in TOMCAT not WAS, but we are building for WAS, so the build fails and NO files are changed after the error. NO BUILD is executed.
We also tried to execute the build.xml with ANT in studio but we get this error:
Buildfile: C:\Users\Primary User\IBM\Worklight\LIS_SampleCollection\BPMWorklight\build.xml
BUILD FAILED
C:\Pathtofile\BPMWorklight\build.xml:3: Cannot find ../../common.xml imported from
C:\Pathtofile\BPMWorklight\build.xml
Total time: 62 milliseconds
You're help is greatly appreciated!
Thanks a lot!!
Best,
Nicolas E.
If all you require is to deploy the updated-for-WAS .war file in WebSphere, you don't need to do any build operation in Worklight. After updating any file under the server\ folder in Worklight Studio (the Eclipse plug-in), the .war file is automatically being re-created.
The build operation is mainly for creating the binaries and deploying to Worklight Server (database) (again, when using the Eclipse plug-in).
So what I suggest is to:
First update application-descriptor.xml with your context root value in worklightServerRootURL, and keep your .wlapps on the side
Update worklight.properties and save them.
Now you have your app ready to deploy and the .war file ready to deploy.
Move to WAS, deploy the .war file
Hopefully things will work now, so you can load Worklight Console and deploy the .wlapp and .adapter files.
I don't know what you've read in the IBM Information Center, but you can also try going over the following training module from IBM Worklight Getting Started.
Moving from development environment to stand-alone QA and production servers
Notes:
The above is not so convenient, but it is A way to move from your
development environment to another staging environment, or
application server...
The issue might also happen even after following my steps above, and this will indicate that the real issue is in your DB2 declaration in worklight.properties.
I will update this answer tomorrow with some insight regarding the possible DB2 declaration issue.
I have a Maven project which generates a 413.06 KB jar file. I have to deploy it on Apache Archiva based managed repository. I have tried to deploy different versions, and it created required layout and structure, uploaded some files, even it uploaded that jar with 200~ KB. every time the jar file size changes but always it fails to upload 413.06 KB jar file.
Information:-
I am running standalone Archiva
I have given guest account to Global Repository Manager & "Repository Manager - MYREPO"
I have also tried a separate account in Archiva with "Repository Manager - MYREPO" rights and configured it in maven's settings.xml file to set custom timeout.
I am getting following error
[ERROR] Failed to execute goal org.apache.maven.plugins:maven-deploy-plugin:2.7:deploy
(default-deploy) on project SharedshelfRepository: Error deploying artifact: Transfer error:
The server did not respond within the configured timeout. -> [Help 1]
that might be maven-deploy-plugin issue, resources plugin itself needs several dependencies,try manually jar nad p
What version of Maven are you using? You might try 3.0.4 as it has a different HTTP library. I'm also not sure if there's more context for what was happening when it timed out (it seems more request oriented rather than deploy oriented, and deploy does request some metadata).
I can't see that you'd need to alter the timeout, as none of the defaults should apply to such a small file. How long does it take to fail?