I'd like to run pintool inside the guest vm provided by firecracker. When I run a simple pintool example like this
../../../pin -t obj-intel64/inscount0.so -- ls
it returns nothing, no output or anything. Even showing -help message
../../../pin -help
doesn't work, returning nothing as well.
Are there some prerequisites that might be relevant to running pintool inside firecracker vm? I'm using alpine linux image as guest vm.
Related
At first, I tried to fix my problem of npm instruction
so I added
[interop]
appendWindowsPath = false
to /etc/wsl.conf
It works, but another problem happen.
When I type code .
Command 'code' not found, did you mean:
command 'node' from deb nodejs (12.22.9~dfsg-1ubuntu3)
command 'cdde' from deb cdde (0.3.1-1build1)
command 'ode' from deb plotutils (2.6-11)
command 'tcode' from deb emboss (6.6.0+dfsg-11ubuntu1)
command 'cde' from deb cde (0.1+git9-g551e54d-1.2)
Try: sudo apt install <deb name>
The above Error message appear.
I tried the following instruction
export PATH=$PATH:"/mnt/c/Users/%USERNAME%/AppData/Local/Programs/Microsoft VS Code/bin"
It also works properly.
Whenever I restarted WSL, npm instruction still worked well, but code instruction lost its function again.
What should I do to fix the problem?
Thanks in advance!
My main suggestion would be to not use appendWindowsPath = false to fix your NPM problem. That's like using a sledgehammer as a flyswatter. As I said in this answer:
Please do not follow the recommendations (like this answer) to completely remove all Windows paths from WSL, as that will severely limit your ability to run Windows applications in WSL (one of its great features).
You'll also lose access to the ability to run PowerShell scripts and commands in WSL easily. You won't have direct access to wsl.exe itself from inside WSL (which comes in handy).
You can type the full paths to these commands, of course, but most instructions and other answers you find here are going to assume that you've left the Windows path intact.
Instead, figure out where npm is installed in your WSL distribution and then determine why it is further toward the end of the PATH than your Windows directories. Windows paths are added at the end of the Linux PATH for a reason. If something in your startup files is adding to the path, it should put it at the beginning, so it has precedence. E.g.:
export PATH="newdir:$PATH"
Note that I'm not saying that you should change your export statement above since, as mentioned, that Windows path would normally come at the end anyway. It's really not going to matter unless you put another code executable somewhere else in your path.
Whenever I restarted WSL, npm instruction still worked well, but code instruction lost its function again.
If you do want the "quick and dirty" (not recommended) solution, then you can simply add that export command that "makes it work" to your ~/.bashrc. That file is processed each time the Bash shell starts interactively.
Can anyone help me on how to boot QEMU KVM with libvirt/sVirt but without using virt-install tool in command line.
or using virsh tool
In order to use virt-install, you need to install the following:
yum install qemu-kvm qemu-img libvirt libvirt-python libvirt-client virt-install virt-viewer bridge-utils tigervnc-server
Then, you can start the daemon:
systemctl start libvirtd
Now, download the OS you want to install, and then copy it to the folder shown below:
cp CentOS-7-x86_64-Everything-1708.iso /var/lib/libvirt/images/
Finally, run virt-install. Here is an example of what the script should look like:
os="--os-type=linux --os-
variant=centos7.0"
location="--location=/var/lib/libvirt/images/CentOS-7-x86_64-Everything-1708.iso"
cpu="--vcpus 2"
ram="--ram 2048"
name="centos7"
disk="--disk /dev/mapper/centos_192- root,size=40"
type="--virt-type qemu"
network="--network network=default"
graphics="--graphics none"
virt-install $os $network $disk $location $cpu $ram $type $disk $graphics --name=$name
After running virt-install, verify that the VM is running using virsh:
virsh list
Id Name State
----------------------------------------------------
4 centos7 running
Virt-install command-line options
Below are some command-line options, but this isn't an extensive list, so I encourage you to do some research in order to fully take advantage of this tool.
os="--os-type=linux --os-variant=centos7.0" --
Some of these commands have main options, as well as sub options. For example, if you type os-type=linux, then you need to further specify --os-variant=centos7.0. You can get a list of OSes that virt-install supports by typing osinfo-query os.
location="--location=/var/lib/libvirt/images/CentOS-7-x86_64-Everything-1708.iso"
This is where you've copied the ISO image file containing the OS you want to install.
cpu="--vcpus 2"
The CPU command-line option enables you to specify the number of vCPUs assigned to the VM. In this example, I'm assigning two vCPUs.
ram="--ram 2048"
The RAM command-line option enables you to specify the amount of memory assigned to the VM. In this example, I'm assigning 2,048 MBs -- or 2 GBs.
name="centos7"
The name command-line option enables you to assign a name to the VM. In this example, I'm naming the VM centos7.
disk="--disk /dev/mapper/centos_192-root,size=40"
This is where the VM will be installed and the size, in gigabytes, to be allocated. This must be a disk partition and not a mount point. Type df -h to list disk partitions.
type="--virt-type qemu"
The type command-line enables you to choose the type of VM you want to install. You can use KVM, QEMU, Xen or KQEMU. Type virsh capabilities to list all of the options. In this example, I'm using QEMU.
network="--network network=default"
Use network=default to set up bridge networking using the default bridge device. This is the easiest method, but there are other options.
graphics="--graphics none"
The graphics command-line option specifies that no graphical VNC or SPICE interface should be created. Use this for a kickstart installation or if you want to use a ttyS0 serial connection.
I have properly installed and setup WSL2. It works fine.
I also setup X11 forwarding and X server (VcXsrv). I can launch GUI apps such like konsole or gvim or even google-chrome from a bash shell.
Now I want to launch konsole by simply double clicking a short cut on the desktop without launching the bash command mode terminal. How should I do it?
I tried running this in cmd:
> wsl /usr/bin/konsole
and it reports:
qt.qpa.xcb: could not connect to display
qt.qpa.plugin: Could not load the Qt platform plugin "xcb" in "" even though it was found.
This application failed to start because no Qt platform plugin could be initialized. Reinstalling the application may fix this problem.
Available platform plugins are: eglfs, linuxfb, minimal, minimalegl, offscreen, vnc, wayland-egl, wayland, wayland-xcomposite-egl, wayland-xcomposite-glx, xcb.
I'm guessing it is because some X11 forwarding configurations were not properly setup, so I created a k.sh as follows:
#!/usr/bin/bash
export DISPLAY=$(cat /etc/resolv.conf | grep nameserver | awk '{print $2; exit;}'):0.0
export LIBGL_ALWAYS_INDIRECT=1
/usr/bin/konsole &
The first two lines were the X11 settings in my .bashrc, the last line launches konsole.
It works fine under bash environment; but when I ran
wsl k.sh
from windows cmd environment, it silently quitted without launching the konsole.
I'm out of ideas. What should I do to directly launch konsole or other Linux GUI apps under windows without having to getting into bash?
Thanks in advance.
You are asking about two different command-lines, and while the failures in running them via the wsl command have the same root-cause, the underlying failures are likely slightly different.
In both cases, the wsl <command> invocation results in a non-login, non-interactive shell where the command simply "runs and exits".
Since the shell is non-login/non-interactive, your startup files (such as ~/.bashrc and ~/.bash_profile, among others) are not being processed.
When you run:
wsl /usr/bin/konsole
... the DISPLAY variable is not set, since, as you said, you normally set it in your ~/.bashrc.
Try using:
wsl -e bash -lic "/usr/bin/konsole"
That will force bash to run as a login (-l), interactive (-i) shell. The DISPLAY should be set correctly, and it should run konsole.
Note that the quotes probably aren't necessary in this case, but are useful for delineating the commands you are passing to bash. More complicated command-lines can be passed in via the quotes.
As for:
wsl k.sh
That's likely a similar problem. You are doing the right thing by setting DISPLAY in your script, but I notice that you aren't using a fully-qualified path it. This would normally work, of course, if your script is in a directory on the $PATH.
But I'm guessing that you might add that directory to the $PATH in your startup config, which means (again) that it isn't being set in this non-login, non-interactive shell.
As before, try:
wsl -e bash -lic "k.sh"`
You could also use a fully-qualified path, of course.
And, I'm fairly sure you are going to run into an issue with trying to put konsole in the background via the script. When WSL exits, and the bash shell process ends, the child konsole process will terminate as well.
You could get around this with a nohup in the script, but then you also need to redirect the stderr. It's probably easiest just to move the & from the script itself to the command-line. Change your k.sh to:
#!/usr/bin/bash
export DISPLAY=$(cat /etc/resolv.conf | grep nameserver | awk '{print $2; exit;}'):0.0
export LIBGL_ALWAYS_INDIRECT=1
/usr/bin/konsole
Then run it with:
wsl -e bash -lic "k.sh &"`
Finally, a side note that when and if you can upgrade to Windows 11, it will automatically create Windows Start Menu entries for any Linux GUI app you install that creates a .desktop file. You can manually create .desktop files to have WSL create Start menu items for most applications.
For reference, in Windows 11 it's easier. To run a GUI application without a terminal window popping up, you just need to call wslg.exe instead of wsl.exe.
So, for example:
target: C:\Windows\System32\wslg.exe konsole
start in: C:\WINDOWS\system32
shortcut key: None
comment: Konsole
This tutorial shows how to install VcXsrv and and edit .bashrc to ensure that the "DISPLAY env var is updated on every restart".
DISPLAY env var needs to be dynamic setting.
I've used it successfully with WSL2 on Windows10 Version 21H2 (OS build 19044.2130) to run Chrome, Edge, and thunar. I'm using the Ubuntu 20.04 Linux distro.
To edit .bashrc follow these instructions.
I recently moved my wsl directory to another drive due to low storage in C: drive. As per the answer provided in this StackOverflow post, I used lxrunoffline tool and moved my Ubuntu distribution to another drive (E:\wsl in my case). As soon as the distribution was moved successfully, I ran wsl to test and it worked like a charm.
Everything went fine until one day I accidentally renamed the E:\wsl folder to something else. Well, as expected, wsl didn't work. Then, I reverted back to the name wsl and expected it to work but to my surprise, it didn't find any installed distribution after that even though it's installed... 😕
E:> wsl
Windows Subsystem for Linux has no installed distributions.
Distributions can be installed by visiting the Microsoft Store:
https://aka.ms/wslstore
Is there any way to revert back to the old directory or make wsl point to a manual location?
EDIT: I don't want to reset Ubuntu as I want to retain the installed packages and preferences...
Well, I finally found a solution to this problem. 😊
This is as simple as registering the distribution using lxrunoffline tool using the rg or register command.
E:\LxRunOffline\LxRunOffline-v3.3.3>lxrunoffline rg
[ERROR] the option '-d' is required but missing
Options:
-n arg Name of the distribution
-d arg The directory containing the distribution.
-c arg The config file to use. This argument is optional.
After running the register command, I was able to start wsl as usual. But that would log you in as a "root" user and would thus start in "/root" directory. I ran the following command to start wsl as different user (this is for Ubuntu):
ubuntu config --default-user <user-name>
I would like to have a VM to look at how applications appear and to develop OS-specific applications, however, I want to keep all my code on my Windows machine so if I decide to nuke a VM or anything like that, it's all still there.
If it matters, I'm using VirtualBox.
This is usually handled with network shares. Share your code folder from your host machine and access it from the VMs.
Aside from network shares, another tool to use for this is a version-control system.
You should always be able make a normal network connection between the VM and the hosting OS, as though it were another computer on the same network. Which, in some sense, it is.
I do this all the time.
I have a directory in a Windows drive that I mount in my host ubuntu 12.04.
I run virtualbox ubuntu 13.04 as a guest.
I want the guest to mount the Windows directory with full non-root permissions.
I do almost all my work from a bash shell, so this method is natural for me.
When searching for methods to automatically mount virtualbox shared folders,
reliable and correct methods are hard to distinguish from those that fail.
Failures include getting and setting permissions, as well as other problems.
Methods that fail include:
modifying /etc/fstab
modifying /etc/rc.local
I am fairly certain that rc.local can be used,
but no methods I have tried worked.
I welcome improvements on these guidelines.
On virtualbox 4.2.14 running nautilus (bash terminal) on an ubuntu 13.04 guest,
Below is a working method to mount Common (sharename)
on /home/$USER/Desktop/Common (mountpoint) with full permissions.
(Note the ‘\’ command continuation character in the find command.)
First time only: create your mountpoint, modify your .bashrc file, and run it.
Respond with password when requested.
These are the four command-lines needed:
mkdir $HOME/Desktop/Common
sudo echo “$USER ALL=(ALL) NOPASSWD:ALL” >> /etc/sudoers
find $HOME/Desktop/Common -maxdepth 0 -type d -empty -exec sudo \
mount -t vboxsf -o \
uid=`id -u $USER`,gid=`id -g $USER` Common $HOME/Desktop/Common \;
source ~/.bashrc # Needed if you want to mount Common in this bash.
All other times: simply launch a bash shell.
The find command mounts the shared directory if the mountpoint directory is empty.
If the mountpoint directory is not empty, it does not run the mount command.
I hope this is error-free and sufficiently general.
Please let me know of corrections and improvements.