With this code:
from pandas_datareader import data as web
import pandas as pd
import datetime
df = web.DataReader('fb', 'yahoo', start = datetime.date(2022,5,28), end = datetime.datetime.now())
df['pct'] = df.Close.pct_change()
plt.style.use('fivethirtyeight')
plt.rcParams['font.family'] = 'Serif'
fig, ax = plt.subplots()
ax2 = ax.twinx()
plt.axis('off')
df.plot.bar(y = 'pct', ax = ax, grid = True, color = '#bf3c3d')
ax.set_title('Large Title',loc='left', fontname="Times New Roman", size=28,fontweight="bold")
ax.set(xlabel=None)
ax.text(0, 0.07, '\nAttention Catcher', fontsize=13, ha='left')
ax.get_legend().remove()
plt.grid(color = 'green', linestyle = 'dotted', linewidth = 0.5)
This plot is produced:
The issue which I am running into is that I want the text "Attention Catcher" to be lined by exactly on the line where "Large Title" started.
However when the date is changed to produces more bars, the text shifts. So the x,y values of text are dependent on the plot.
What can I do for the text to remain lined up with "Large Title"
I would like it to look like this regardless of the number of bars being plotted. Please help.
By selecting the coordinate system in the string annotation, it can be set to be fixed, independent of the graph size. The value you set was set manually and should be modified.
ax.text(0, 0.07, '\nAttention Catcher', fontsize=13, ha='left')
Change to the following
ax.text(0.08, 1.07, '\nAttention Catcher', ha='left', va='top', fontsize=13, transform=fig.transFigure)
If the subject period is short
Related
I am trying to make a slider that can adjust the x and y coordinates of the legend anchor, but this does not seem to be updating on the plot. I keep getting the message in console "No artists with labels found to put in legend. Note that artists whose label start with an underscore are ignored when legend() is called with no argument", each time the slider value is updated.
Here is the code, taken from this example in the matplotlib docs
from cProfile import label
import numpy as np
import matplotlib.pyplot as plt
from matplotlib.widgets import Slider, Button
# The parametrized function to be plotted
def f(t, amplitude, frequency):
return amplitude * np.sin(2 * np.pi * frequency * t)
t = np.linspace(0, 1, 1000)
# Define initial parameters
init_amplitude = 5
init_frequency = 3
# Create the figure and the line that we will manipulate
fig, ax = plt.subplots()
line, = ax.plot(t, f(t, init_amplitude, init_frequency), lw=2, label = "wave")
ax.set_xlabel('Time [s]')
# adjust the main plot to make room for the sliders
fig.subplots_adjust(left=0.25, bottom=0.25)
initx = 0.4
inity = 0.2
def l(x,y):
return (x,y)
legend = fig.legend(title = 'title', prop={'size': 8}, bbox_to_anchor = l(initx,inity))
legend.remove( )
# Make a horizontal slider to control the frequency.
axfreq = fig.add_axes([0.25, 0.1, 0.3, 0.3])
freq_slider = Slider(
ax=axfreq,
label='Frequency [Hz]',
valmin=0.1,
valmax=30,
valinit=init_frequency,
)
# Make a vertically oriented slider to control the amplitude
axamp = fig.add_axes([0.1, 0.25, 0.0225, 0.63])
amp_slider = Slider(
ax=axamp,
label="Amplitude",
valmin=0,
valmax=10,
valinit=init_amplitude,
orientation="vertical"
)
# The function to be called anytime a slider's value changes
def update(val):
legend = plt.legend(title = '$J_{xx}$', prop={'size': 8}, bbox_to_anchor= l(amp_slider.val, freq_slider.val))
legend.remove()
#line.set_ydata(f(t, amp_slider.val, freq_slider.val))
fig.canvas.draw_idle()
# register the update function with each slider
freq_slider.on_changed(update)
amp_slider.on_changed(update)
# Create a `matplotlib.widgets.Button` to reset the sliders to initial values.
resetax = fig.add_axes([0.8, 0.025, 0.1, 0.04])
button = Button(resetax, 'Reset', hovercolor='0.975')
def reset(event):
freq_slider.reset()
amp_slider.reset()
button.on_clicked(reset)
plt.show()
Is it even possible to update other matplotlib plot parameters like xticks/yticks or xlim/ylim with a slider, rather than the actual plotted data? I am asking so that I can speed up the graphing process, as I tend to lose a lot of time just getting the right plot parameters whilst making plots presentable, and would like to automate this in some way.
I am using subplots side by side
plt.subplot(1, 2, 1)
# plot 1
plt.xlabel('MEM SET')
plt.ylabel('Memory Used')
plt.bar(inst_memory['MEMORY_SET_TYPE'], inst_memory['USED_MB'], alpha = 0.5, color = 'r')
# pol 2
plt.subplot(1, 2, 2)
plt.xlabel('MEM POOL')
plt.ylabel('Memory Used')
plt.bar(set_memory['POOL_TYPE'], set_memory['MEMORY_POOL_USED'], alpha = 0.5, color = 'g')
they have identical size - but is it possible to define the width for each subplot, so the right one could be wider as it has more entries and text would not squeeze or would it be possible to replace the bottom x-text by a number and have a legend with 1:means xx 2:means yyy
I find GridSpec helpful for subplot arrangements, see this demo at matplotlib.
import matplotlib.pyplot as plt
from matplotlib.gridspec import GridSpec
import pandas as pd
N=24
inst_memory = pd.DataFrame({'MEMORY_SET_TYPE': np.random.randint(0,3,N),
'USED_MB': np.random.randint(0,1000,N)})
set_memory = pd.DataFrame({'MEMORY_POOL_USED': np.random.randint(0,1000,N),
'POOL_TYPE': np.random.randint(0,10,N)})
fig = plt.figure()
gs = GridSpec(1, 2, width_ratios=[1, 2],wspace=0.3)
ax1 = fig.add_subplot(gs[0])
ax2 = fig.add_subplot(gs[1])
ax1.bar(inst_memory['MEMORY_SET_TYPE'], inst_memory['USED_MB'], alpha = 0.5, color = 'r')
ax2.bar(set_memory['POOL_TYPE'], set_memory['MEMORY_POOL_USED'], alpha = 0.5, color = 'g')
You may need to adjust width_ratios and wspace to get the desired layout.
Also, rotating the text in x-axis might help, some info here.
Believe it or not I need help with formatting the title of the legend (not the title of the plot) in a simple plot. I am plotting two series of data (X1 and X2) against Y in a twiny() plot.
I call matplotlib.lines to construct lines for the legend and then call plt.legend to construct a legend pass text strings to name/explain the lines, format that text and place the legend. I could also pass a title-string to plt.legend but I cannot format it.
The closest I have come to a solution is to create another 'artist' for the title using .legend()set_title and then format the title text. I assign it to a variable and call the variable in the above mentioned plt.legend. This does not result in an error nor does it produce the desired effect. I have no control over the placement of the title.
I have read through a number of S-O postings and answers on legend-related issues, looked at the MPL docs, various tutorial type web-pages and even taken a peak at a GIT-hub issue (#10391). Presumably the answer to my question is somewhere in there but not in a format that I have been able to successfully implement.
#Imports
import matplotlib.pyplot as plt
import matplotlib.lines as mlines
import numpy as np
import seaborn as sns
plt.style.use('seaborn')
#Some made up data
y = np.arange(0, 1200, 100)
x1 = (np.log(y+1))
x2 = (2.2*x1)
#Plot figure
fig = plt.figure(figsize = (12, 14))
fig = plt.figure()
ax1 = fig.add_subplot(111)
ax2 = ax1.twiny()
sy1, sy2 = 'b-', 'r-'
tp, bm = 0, 1100
red_ticks = np.arange(0, 11, 2)
ax1.plot(x1, y, sy1)
ax1.set_ylim(tp, bm)
ax1.set_xlim(0, 10)
ax1.set_ylabel('Distance (m)')
ax1.set_xlabel('Area')
ax1.set_xticks(red_ticks)
blue_ticks = np.arange(0, 22, 4)
ax2.plot(x2, y, sy2)
ax2.set_xlim(0, 20)
ax2.set_xlabel('Volume')
ax2.set_xticks(blue_ticks)
ax2.grid(False)
x1_line = mlines.Line2D([], [], color='blue')
x2_line = mlines.Line2D([], [], color='red')
leg = ax1.legend().set_title('Format Legend Title ?',
prop = {'size': 'large',
'family':'serif',
'style':'italic'})
plt.legend([x1_line, x2_line], ['Blue Model', 'Red Model'],
title = leg,
prop ={'size':12,
'family':'serif',
'style':'italic'},
bbox_to_anchor = (.32, .92))
So what I want is a simple way to control the formatting of both the legend-title and legend-text in a single artist, and also have control over the placement of said legend.
The above code returns a "No handles with labels found to put in legend."
You need one single legend. You can set the title of that legend (not some other legend); then style it to your liking.
leg = ax2.legend([x1_line, x2_line], ['Blue Model', 'Red Model'],
prop ={'size':12, 'family':'serif', 'style':'italic'},
bbox_to_anchor = (.32, .92))
leg.set_title('Format Legend Title ?', prop = {'size': 24, 'family':'sans-serif'})
Unrelated, but also important: Note that you have two figures in your code. You should remove one of them.
I am trying to make some figures for a scientific article, so I want my figures to have a specific size. I also see that Matplotlib by default adds a lot of padding on the border of the figures, which I don't need (since the figures will be on a white background anyway).
To set a specific figure size I simply use plt.figure(figsize = [w, h]), and I add the argument tight_layout = {'pad': 0} to remove the padding. This works perfectly, and even works if I add a title, y/x-labels etc. Example:
fig = plt.figure(
figsize = [3,2],
tight_layout = {'pad': 0}
)
ax = fig.add_subplot(111)
plt.title('title')
ax.set_ylabel('y label')
ax.set_xlabel('x label')
plt.savefig('figure01.pdf')
This creates a pdf file with exact size 3x2 (inches).
The issue I have is that when I for example add a text box outside the axis (typically a legend box), Matplotlib does not make room for the text box like it does when adding titles/axis labels. Typically the text box is cut off, or does not show in the saved figure at all. Example:
plt.close('all')
fig = plt.figure(
figsize = [3,2],
tight_layout = {'pad': 0}
)
ax = fig.add_subplot(111)
plt.title('title')
ax.set_ylabel('y label')
ax.set_xlabel('x label')
t = ax.text(0.7, 1.1, 'my text here', bbox = dict(boxstyle = 'round'))
plt.savefig('figure02.pdf')
A solution I found elsewhere on SO was to add the argument bbox_inches = 'tight' to the savefig command. The text box is now included like I wanted, but the pdf is now the wrong size. It seems like Matplotlib just makes the figure bigger, instead of reducing the size of the axes like it does when adding titles and x/y-labels.
Example:
plt.close('all')
fig = plt.figure(
figsize = [3,2],
tight_layout = {'pad': 0}
)
ax = fig.add_subplot(111)
plt.title('title')
ax.set_ylabel('y label')
ax.set_xlabel('x label')
t = ax.text(0.7, 1.1, 'my text here', bbox = dict(boxstyle = 'round'))
plt.savefig('figure03.pdf', bbox_inches = 'tight')
(This figure is 3.307x2.248)
Is there any solution to this that covers most cases with a legend just outside the axes?
So the requirements are:
Having a fixed, predefined figure size
Adding a text label or legend outside the axes
Axes and text cannot overlap
The axes, together with the title and axis labels, sits tightly agains the figure border.
So tight_layout with pad = 0, solves 1. and 4. but contradicts 2.
One could think on setting pad to a larger value. This would solve 2. However, since it's is symmetric in all directions, it would contradict 4.
Using bbox_inches = 'tight' changes the figure size. Contradicts 1.
So I think there is no generic solution to this problem.
Something I can come up with is the following: It sets the text in figure coordinates and then resizes the axes either in horizontal or in vertical direction such that there is no overlap between the axes and the text.
import matplotlib.pyplot as plt
import matplotlib.transforms
fig = plt.figure(figsize = [3,2])
ax = fig.add_subplot(111)
plt.title('title')
ax.set_ylabel('y label')
ax.set_xlabel('x label')
def text_legend(ax, x0, y0, text, direction = "v", padpoints = 3, margin=1.,**kwargs):
ha = kwargs.pop("ha", "right")
va = kwargs.pop("va", "top")
t = ax.figure.text(x0, y0, text, ha=ha, va=va, **kwargs)
otrans = ax.figure.transFigure
plt.tight_layout(pad=0)
ax.figure.canvas.draw()
plt.tight_layout(pad=0)
offs = t._bbox_patch.get_boxstyle().pad * t.get_size() + margin # adding 1pt
trans = otrans + \
matplotlib.transforms.ScaledTranslation(-offs/72.,-offs/72.,fig.dpi_scale_trans)
t.set_transform(trans)
ax.figure.canvas.draw()
ppar = [0,-padpoints/72.] if direction == "v" else [-padpoints/72.,0]
trans2 = matplotlib.transforms.ScaledTranslation(ppar[0],ppar[1],fig.dpi_scale_trans) + \
ax.figure.transFigure.inverted()
tbox = trans2.transform(t._bbox_patch.get_window_extent())
bbox = ax.get_position()
if direction=="v":
ax.set_position([bbox.x0, bbox.y0,bbox.width, tbox[0][1]-bbox.y0])
else:
ax.set_position([bbox.x0, bbox.y0,tbox[0][0]-bbox.x0, bbox.height])
# case 1: place text label at top right corner of figure (1,1). Adjust axes height.
#text_legend(ax, 1,1, 'my text here', bbox = dict(boxstyle = 'round'), )
# case 2: place text left of axes, (1, y), direction=="v"
text_legend(ax, 1., 0.8, 'my text here', margin=2., direction="h", bbox = dict(boxstyle = 'round') )
plt.savefig(__file__+'.pdf')
plt.show()
case 1 (left) and case 2 (right):
Doin the same with a legend is slightly easier, because we can directly use the bbox_to_anchor argument and don't need to control the fancy box around the legend.
import matplotlib.pyplot as plt
import matplotlib.transforms
fig = plt.figure(figsize = [3.5,2])
ax = fig.add_subplot(111)
ax.set_title('title')
ax.set_ylabel('y label')
ax.set_xlabel('x label')
ax.plot([1,2,3], marker="o", label="quantity 1")
ax.plot([2,1.7,1.2], marker="s", label="quantity 2")
def legend(ax, x0=1,y0=1, direction = "v", padpoints = 3,**kwargs):
otrans = ax.figure.transFigure
t = ax.legend(bbox_to_anchor=(x0,y0), loc=1, bbox_transform=otrans,**kwargs)
plt.tight_layout(pad=0)
ax.figure.canvas.draw()
plt.tight_layout(pad=0)
ppar = [0,-padpoints/72.] if direction == "v" else [-padpoints/72.,0]
trans2=matplotlib.transforms.ScaledTranslation(ppar[0],ppar[1],fig.dpi_scale_trans)+\
ax.figure.transFigure.inverted()
tbox = t.get_window_extent().transformed(trans2 )
bbox = ax.get_position()
if direction=="v":
ax.set_position([bbox.x0, bbox.y0,bbox.width, tbox.y0-bbox.y0])
else:
ax.set_position([bbox.x0, bbox.y0,tbox.x0-bbox.x0, bbox.height])
# case 1: place text label at top right corner of figure (1,1). Adjust axes height.
#legend(ax, borderaxespad=0)
# case 2: place text left of axes, (1, y), direction=="h"
legend(ax,y0=0.8, direction="h", borderaxespad=0.2)
plt.savefig(__file__+'.pdf')
plt.show()
Why 72? The 72 is the number of points per inch (ppi). This is a fixed typographic unit e.g. fontsizes are always given in points (like 12pt). Because matplotlib defines the padding of the text box in units relative to fontsize, which is points, we need to use 72 to transform back to inches (and then to display coordinates). The default dots per inch (dpi) is not touched here, but is accounted for in fig.dpi_scale_trans. If you want to change dpi you need to make sure the figure dpi is set when creating the figure as well as when saving it (use dpi=.. in the call to plt.figure() as well as plt.savefig()).
As of matplotlib==3.1.3, you can use constrained_layout=True to achieve the desired result. This is currently experimental, but see the docs for a very helpful guide (and the section specifically on legends). Note that the legend will steal space from the plot, but this is unavoidable. I've found that as long as the legend does not take up too much space relative to the size of the plot, then the figure gets saved without cropping anything.
import matplotlib.pyplot as plt
fig, ax = plt.subplots(figsize=(3, 2), constrained_layout=True)
ax.set_title('title')
ax.set_ylabel('y label')
ax.set_xlabel('x label')
ax.plot([0,1], [0,1], label='my text here')
ax.legend(loc='center left', bbox_to_anchor=(1.1, 0.5))
fig.savefig('figure03.pdf')
I'm trying to draw a heat map/pixelmap representation of a matrix using matplotlib. I currently have the following code which gives me the pixelmap as required (adapted from Heatmap in matplotlib with pcolor?):
import matplotlib.pyplot as plt
import numpy as np
column_labels = list('ABCD')
row_labels = list('0123')
data = np.array([[0,1,2,0],
[1,0,1,1],
[1,2,0,0],
[0,0,0,1]])
fig, ax = plt.subplots()
heatmap = ax.pcolor(data, cmap=plt.cm.Blues)
# put the major ticks at the middle of each cell
ax.set_xticks(np.arange(data.shape[0])+0.5, minor=False)
ax.set_yticks(np.arange(data.shape[1])+0.5, minor=False)
# want a more natural, table-like display
ax.invert_yaxis()
ax.xaxis.tick_top()
ax.set_xticklabels(row_labels, minor=False)
ax.set_yticklabels(column_labels, minor=False)
ax.yaxis.grid(True, which='minor', linestyle='-', color='k', linewidth = 0.3, alpha = 0.5)
ax.xaxis.grid(True, which='minor', linestyle='-', color='k', linewidth = 0.3, alpha = 0.5)
# Set the location of the minor ticks to the edge of pixels for the x grid
minor_locator = AutoMinorLocator(2)
ax.xaxis.set_minor_locator(minor_locator)
# Lets turn off the actual minor tick marks though
for tickmark in ax.xaxis.get_minor_ticks():
tickmark.tick1On = tickmark.tick2On = False
# Set the location of the minor ticks to the edge of pixels for the y grid
minor_locator = AutoMinorLocator(2)
ax.yaxis.set_minor_locator(minor_locator)
# Lets turn off the actual minor tick marks though
for tickmark in ax.yaxis.get_minor_ticks():
tickmark.tick1On = tickmark.tick2On = False
plt.show()
Which gives the following plot:
However I would like to extend this such that on mouse click I can highlight a 'row' in the pixelmap in green, e.g. if the user selected row 'C' I would have (I appreciate the green highlight is not clear for pixels with a 0 value):
I know how to deal with the mouse events but I'm not sure how to modify the colour of a single row in the pixelmap. It would also help if I could set labels for individual pixels of the pixel map to be retrieved on mouse click, as opposed to using the mouse x/y location to index the label lists.
I have figured out my own problem, with help from this question:
Plotting of 2D data : heatmap with different colormaps.
The code is below and the comments should explain the steps taken clearly.
import matplotlib.pyplot as plt
import numpy as np
from numpy.ma import masked_array
import matplotlib.cm as cm
from matplotlib.ticker import AutoMinorLocator
column_labels = list('ABCD')
row_labels = list('0123')
data = np.array([[0,1,2,0],
[1,0,1,1],
[1,2,0,0],
[0,0,0,1]])
fig, ax = plt.subplots()
# List to keep track of handles for each pixel row
pixelrows = []
# Lets create a normalizer for the whole data array
norm = plt.Normalize(vmin = np.min(data), vmax = np.max(data))
# Let's loop through and plot each pixel row
for i, row in enumerate(data):
# First create a mask to ignore all others rows than the current
zerosarray = np.ones_like(data)
zerosarray[i, :] = 0
plotarray = masked_array(data, mask=zerosarray)
# If we are not on the 3rd row down let's use the red colormap
if i != 2:
pixelrows.append(ax.matshow(plotarray, norm=norm, cmap=cm.Reds))
# Otherwise if we are at the 3rd row use the green colormap
else:
pixelrows.append(ax.matshow(plotarray, norm=norm, cmap=cm.Greens))
# put the major ticks at the middle of each cell
ax.set_xticks(np.arange(data.shape[0]), minor=False)
ax.set_yticks(np.arange(data.shape[1]), minor=False)
# want a more natural, table-like display
ax.xaxis.tick_top()
ax.set_xticklabels(row_labels, minor=False)
ax.set_yticklabels(column_labels, minor=False)
ax.yaxis.grid(True, which='minor', linestyle='-', color='k', linewidth = 0.3, alpha = 0.5)
ax.xaxis.grid(True, which='minor', linestyle='-', color='k', linewidth = 0.3, alpha = 0.5)
# Set the location of the minor ticks to the edge of pixels for the x grid
minor_locator = AutoMinorLocator(2)
ax.xaxis.set_minor_locator(minor_locator)
# Lets turn of the actual minor tick marks though
for tickmark in ax.xaxis.get_minor_ticks():
tickmark.tick1On = tickmark.tick2On = False
# Set the location of the minor ticks to the edge of pixels for the y grid
minor_locator = AutoMinorLocator(2)
ax.yaxis.set_minor_locator(minor_locator)
# Lets turn of the actual minor tick marks though
for tickmark in ax.yaxis.get_minor_ticks():
tickmark.tick1On = tickmark.tick2On = False
plt.show()