For a few days now, after using gofmt ("gofmt -w test.go"), I have received an error message with which I cannot do anything:
Error: size of test.go changed during reading (from 18786 to 18742 bytes)
This message appears, although I did not change the program code, but only added a comment. What am I doing wrong?
Related
My last context/error I see in my valgrind output file is...
==3030== 1075 errors in context 61 of 540:
==3030== Syscall param ioctl(SIOCETHTOOL,ir) points to uninitialised byte(s)
==3030== at 0x7525248: ioctl (syscall-template.S:84)
==3030== by 0x686A2A7: ??? (in /lib/libpal.so)
==3030== Address 0x96cf958 is on thread 16's stack
==3030== Uninitialised value was created by a stack allocation
==3030== at 0x686A20C: ??? (in /lib/libpal.so)
...but I don't see error contexts 62 - 540. My first thought was maybe in closing the program, valgrind crashed, but after this context it printed the ERROR SUMMARY
ERROR SUMMARY: 9733 errors from 540 contexts (suppressed: 0 from 0)
I don't think it's because we came across a frame without debug info because I can see this exact same issue get hit the first time at the very beginning of my output file. Or maybe the printing of error contexts specifically, is halted when a stacktrace has missing debug info?
Any ideas? Need an additional command line argument for valgrind? I know in helgrind it'll quit after seeing 1000000 errors(something like that) but it explicitly tells you what it's doing.
So for my version of valgrind I also executed helgrind and saw all contexts(647) as expected. I think the problem above is simply a result of valgrind coming across a frame with no debug symbols and saying, "If there's no debug info, I'm moving on"
All of my logs I'm producing end with this same libpal frame at various context numbers 100-something, 200-something, etc.
I'm relatively inexperienced in coding, so right now I'm just familiarizing myself with the basics of how to use SE, which I'll need to use in the near future.
At the moment I'm trying to get it to analyze a FITS file on my computer (which is a Mac). I'm sure this is something obvious, but I haven't been able to get it do that. Following the instructions in Chapters 6 and 7 of Source Extractor for Dummies (linked below), I input the following:
sex MedSpiral_20deg_Serl2_.45_.fits.fits -c configuration_file.txt
And got the following error message:
WARNING: configuration_file.txt not found, using internal defaults
----- SExtractor 2.19.5 started on 2020-02-05 at 17:10:59 with 1 thread
Setting catalog parameters
ERROR: can't read default.param
I then tried entering parameters manually:
sex MedSpiral_20deg_Ser12_.45_.fits.fits -c configuration_file.txt -DETECT_TYPE CCD -MAG_ZEROPOINT 2.5 -PIXEL_SCALE 0 -SATUR_LEVEL 1 -SEEING_FWHM 1
And got the same error message. I tried referencing default.sex directly:
sex MedSpiral_20deg_Ser12_.45_.fits.fits -c default.sex
And got the same error message again, substituting "configuration_file.txt not found" with "default.sex not found" (I checked that default.sex was on my computer, it is). The same thing happened when I tried to use default.param.
Here's the link to SE for Dummies (Chapter 6 begins on page 19):
http://astroa.physics.metu.edu.tr/MANUALS/sextractor/Guide2source_extractor.pdf
If you run the command "sex MedSpiral_20deg_Ser12_.45_fits.fits -c default.sex" within the config folder (within the sextractor folder), you will be able to run it.
However, I wonder how I can possibly run sextractor command from any folder in my computer?
I am suddenly receiving this error message when compiling my app:
elm make src/App.elm --output ../assets/javascripts/elm/App.js
elm: not enough bytes
CallStack (from HasCallStack):
error, called at libraries/binary/src/Data/Binary.hs:212:21 in binary-0.8.5.1:Data.Binary
make: *** [App.js] Error 1
Compiler bug?
Edit: The workaround is to delete elm-stuff. Then it will compile once, and have the same bug on the next attempt.
I'm running regular uploading job to upload csv into BigQuery. The job runs every hour. According to recent fail log, it says:
Error: [REASON] invalid [MESSAGE] Invalid argument: service.geotab.com [LOCATION] File: 0 / Offset:268436098 / Line:218637 / Field:2
Error: [REASON] invalid [MESSAGE] Too many errors encountered. Limit is: 0. [LOCATION]
I went to line 218638 (the original csv has a headline, so I assume 218638 should be the actual failed line, let me know if I'm wrong) but it seems all right. I checked according table in BigQuery, it has that line too, which means I actually successfully uploaded this line before.
Then why does it causes failure recently?
project id: red-road-574
Job ID: Job_Upload-7EDCB180-2A2E-492B-9143-BEFFB36E5BB5
This indicates that there was a problem with the data in your file, where it didn't match the schema.
The error message says it occurred at File: 0 / Offset:268436098 / Line:218637 / Field:2. This means the first file (it looks like you just had one), and then the chunk of the file starting at 268436098 bytes from the beginning of the file, then the 218637th line from that file offset.
The reason for the offset portion is that bigquery processes large files in parallel in multiple workers. Each file worker starts at an offset from the beginning of the file. The offset that we include is the offset that the worker started from.
From the rest of the error message, it looks like the string service.geotab.com showed up in the second field, but the second field was a number, and service.geotab.com isn't a valid number. Perhaps there was a stray newline?
You can see what the lines looked like around the error by doing:
cat <yourfile> | tail -c +268436098 | tail -n +218636 | head -3
This will print out three lines... the one before the error (since I used -n +218636 instead of +218637), the one that had the error, and the next line as well.
Note that if this is just one line in the file that has a problem, you may be able to work around the issue by specifying maxBadRecords.
I have a test script I'm running that generates some errors,shown below, I expect these errors. Is there anyway I can prevent them from showing on the screen however? I use the
$ write sys$output
to display if there is an expected error.
I tried to use
$ DEFINE SYS$ERROR ERROR.LOG
but this then changed my entire error output log to this, if this is the correct way to handle it can I unset this at the end of my script somehow?
[error example]
%DCL-E-OPENIN, error opening TEST$DISK:[AAA]NOTTHERE.TXT; as input
-RMS-E-FNF, file not found
%DCL-E-OPENIN, error opening TEST$DISK:[AAA]NOTTHERE.TXT; as input
-RMS-E-FNF, file not found
%DCL-W-UNDFIL, file has not been opened by DCL - check logical name
DEFINE/USER creates a logical name that disappears when the next image exits.
So if you use that just before a command just to protect that command, then fine.
Otherwise I would prefer SET MESSAGE to control the output.
And of course yoy want to grab $STATUS and verify it after the command for success or for the expected error, reporting any unexpected error.
Better still... if you expect certain error conditions to occur,
then why not test for them?
For example:
$ file = F$SEARCH("TEST$DISK:[AAA]NOTTHERE.TXT")
$ IF file.NES."" THEN TYPE 'file'
Cheers,
Hein
To suppress Error message inside a script. try this command
$ DEFINE/USER SYS$ERROR NL:
NL: is a null device, so you don`t see any error messages displayed on your terminal.
good luck
This works interactively and in batch.
$ SET MESSAGE /NOTEXT /NOSEV /NOFAC /NOID
$ <DCL_Command>
$ SET MESSAGE /TEXT /SEV /FAC/ ID