I'm working on a similar problem to check if a column contains ALL the values of another column - Mysql
This CTE is part of a bigger query. CTE_ProjekteRollen contains a subset of ProjektParamRolle and can contain zero or more records. I want a list of ProjektParam where the items in CTE_ProjekteRollen are all present (when joined with ProjektParamRolle). My solution works in all cases where CTE_ProjektRollen is not empty.
CTE_FilteredByRolle as (
select pp.ID_ProjektParam
from Basis.ProjektParam pp
join Basis.ProjektParamRolle ppr
on pp.ID_ProjektParam = ppr.ID_ProjektParam
join CTE_ProjektRollen pr
on ppr.Rolle = pr.Rolle
group by pp.ID_ProjektParam
having Count(pp.ID_ProjektParam) = (
select Count(Rolle)
from CTE_ProjektRollen))
What do I have to change to get all ProjektParam (joined with ProjektParamRolle), if CTE_ProjektRollen is empty?
Edit: I think I phrased my question wrong, because I didn't understand it fully. #Kendle's solution works for what I described, but I actually needed all ID_ProjektParam (not joined with ProjektParamRolle).
The actual CTE that worked for me was
CTE_FilteredByRolle as (
select pp.ID_ProjektParam
from Basis.ProjektParam pp
where (
select Count(ppr.Rolle)
from Basis.ProjektParamRolle ppr
join CTE_ProjektRollen pr
on ppr.Rolle = pr.Rolle
where ppr.ID_ProjektParam = pp.ID_ProjektParam) = (
select Count(Rolle)
from CTE_ProjektRollen))
We can use a CASE to check whether the table is empty. If it is empty we return the number to which we are comparing, so it will always be true.
CTE_FilteredByRolle as (
select pp.ID_ProjektParam
from Basis.ProjektParam pp
join Basis.ProjektParamRolle ppr
on pp.ID_ProjektParam = ppr.ID_ProjektParam
join CTE_ProjektRollen pr
on ppr.Rolle = pr.Rolle
group by pp.ID_ProjektParam
having Count(distinct pp.ID_ProjektParam)
= case when(select Count(distinct Rolle) from CTE_ProjektRollen)) = 0
then Count(distinct pp.ID_ProjektParam)
else (select Count(distinct Rolle) from CTE_ProjektRollen))
end;
Related
I have the following query:
SELECT
F.IID,
F.E_NUM AS M_E_NUM,
MCI.E_NUM AS MCI_E_NUM,
F.C_NUM AS M_C_NUM,
MCI.C_NUM AS MCI_C_NUM,
F.ET_ID AS M_ET_ID,
EDIE.ET_ID AS ED_INDV_ET_ID,
COUNT(*) OVER (PARTITION BY F.IID) IID_COUNT
FROM FT_T F JOIN CEMEI_T MCI ON F.IID = MCI.IID
JOIN EDE_T EDE ON MCI.E_NUM = EDE.E_NUM
JOIN EDIE_T EDIE ON EDIE.IID = F.IID AND EDIE.ET_ID = EDE.ET_ID
WHERE
F.DEL_F = 'N'
AND MCI.EFF_END_DT IS NULL
AND MCI.TOS = 'BVVB'
AND EDE.PTEND_DT IS NULL
AND EDE.DEL_S = 'N'
AND EDE.CUR_IND = 'A'
AND EDIE.TAR_N = 'Y'
AND F.IID IN
(
SELECT DISTINCT IID
FROM FT_T
WHERE GROUP_ID = 'BG'
AND DEL_F = 'N'
AND (IID, E_NUM) NOT IN
(
SELECT IID, E_NUM FROM CEMEI_T
WHERE TOS = 'BVVB' AND EFF_END_DT IS NULL
)
);
I am basically grabbing information from several tables and creating a flat record of them.
Everything works accordingly except now I need to find out whether there are two records in FT_T table with identical IID's and display that count as part of the result set.
I tried to use partitioning but all the rows in the result set return a single count even though there are ones that have 2 records with identical IID's in FT_T.
The reason I initially said that I'm gathering information from several tables is due to the fact that FT_T might not have all the information I need if two records are not available for the same IID, so I have to retrieve them from other tables JOINed in the query. However, I need to know which FT_T.IID's have two records in FT_T (or greater than one).
Perhaps you need to calculate the count before the join and filtering:
SELECT . . .
FROM (SELECT F.*,
COUNT(*) OVER (PARTITION BY F.IID) as IID_CNT
FROM FT_T F
) JOIN
CEMEI_T MCI
ON F.IID = MCI.IID JOIN
EDE_T EDE
ON MCI.E_NUM = EDE.E_NUM JOIN
EDIE_T EDIE
ON EDIE.IID = F.IID AND EDIE.ET_ID = EDE.ET_ID
. . .
this is merely a comment/observation, but formatting is needed
You use of in(...) with select distinct and not in(...,...) seems complex and could be a problem if some values are NULL. I suggest you consider using EXISTS and NOT EXISTS instead. e.g.
AND EXISTS (
SELECT
NULL
FROM FT_T
WHERE F.IID = FT_T.IID
AND FT_T.GROUP_ID = 'BG'
AND FT_T.DEL_F = 'N'
AND NOT EXISTS (
SELECT
NULL
FROM CEMEI_T
WHERE FT_T.IID = CEMEI_T.IID
AND FT_T.E_NUM = CEMEI_T.E_NUM
AND CEMEI_T.TOS = 'BVVB'
AND CEMEI_T.EFF_END_DT IS NULL
)
)
My Query
SELECT
stoMast.sStockistCode,
stoMast.sStateName,
stoMast.sDivision,
stateMap.sRMCode
FROM
tblRSM_State_Mapping stateMap
INNER JOIN
tblStockistMaster stoMast ON
stateMap.sStateName = stoMast.sStateName
WHERE
stateMap.sRMCode = 'MCNE04001'
and
stoMast.sDivision = 'CIDIS'
except
select
sStockistCode,
sStateName,
sDivision,
sRMCode
From
tblEntry
Again I would like to compare the query result columns
sStockistCode
sStateName
sDivision
with tblStockistMaster with the same fields
sStockistCode
sStateName
sDivision
and retrieve the STOCKIST NAME.
Don't know how to compare the above query result with the table.
Maybe you can use following SQL code used with CTE expression
;with cte as (
SELECT
stoMast.sStockistCode,
stoMast.sStateName,
stoMast.sDivision,
stateMap.sRMCode
FROM
tblRSM_State_Mapping stateMap
INNER JOIN
tblStockistMaster stoMast ON
stateMap.sStateName = stoMast.sStateName
WHERE
stateMap.sRMCode = 'MCNE04001'
and
stoMast.sDivision = 'CIDIS'
except
select
sStockistCode,
sStateName,
sDivision,
sRMCode
From
tblEntry
)
select
cte.*,
sm.sStockistName
from cte
left join tblStockistMaster as sm
on sm.sStockistCode = cte.sStockistCode and
sm.sStateName = cte.sStateName and
sm.sDivision = cte.sDivision
-- I retrieve the stockist Name
SELECT
stoMast.sStockistName,
FROM
tblRSM_State_Mapping stateMap
INNER JOIN
tblStockistMaster stoMast
ON stateMap.sStateName = stoMast.sStateName
-- I'm joining table entry If I can match
LEFT JOIN
tblEntry tbl
on tbl.sStockistCode = stoMast.sStockistName
AND tbl.sStateName = stoMast.sStateName
AND tbl.sDivision = stoMast.sDivision
AND tbl.sRMCode = stateMap.sRMCode
WHERE
stateMap.sRMCode = 'MCNE04001'
and stoMast.sDivision = 'CIDIS'
-- And The the exept thing, I don't want that got a match with the tableentry
AND COALESCE(tbl.sStockistCode, tbl.sStateName, tbl.sDivision, tbl.sRMCode) is null
I expect it is what you wanted to get. On another way please help us understand wht you come from (tables and idea of what data can be in) and the result you want. Will be easier to create a query.
I have tried all possible joins and sub-queries but I cant get the data to only return one value from table 2 that exactly matches the vendor ID. If I dont have the address included in the query, I get one hit for the vendor ID. How can I make it so that when I add the address, I only want the one vendor that I get prior to adding the address.
The vendor from table one must be VEN-CLASS IS NOT NULL.
This was my last attempt using subquery:
SELECT DISTINCT APVENMAST.VENDOR_GROUP,
APVENMAST.VENDOR,
APVENMAST.VENDOR_VNAME,
APVENMAST.VENDOR_CONTCT,
APVENMAST.TAX_ID,
Subquery.ADDR1
FROM (TEST.dbo.APVENMAST APVENMAST
INNER JOIN
(SELECT APVENADDR.ADDR1,
APVENADDR.VENDOR_GROUP,
APVENADDR.VENDOR,
APVENMAST.VEN_CLASS
FROM TEST.dbo.APVENADDR APVENADDR
INNER JOIN TEST.dbo.APVENMAST APVENMAST
ON (APVENADDR.VENDOR_GROUP = APVENMAST.VENDOR_GROUP)
AND (APVENADDR.VENDOR = APVENMAST.VENDOR)
WHERE (APVENMAST.VEN_CLASS IS NOT NULL)) Subquery
ON (APVENMAST.VENDOR_GROUP = Subquery.VENDOR_GROUP)
AND (APVENMAST.VENDOR = Subquery.VENDOR))
INNER JOIN TEST.dbo.APVENLOC APVENLOC
ON (APVENMAST.VENDOR_GROUP = APVENLOC.VENDOR_GROUP)
AND (APVENMAST.VENDOR = APVENLOC.VENDOR)
WHERE (APVENMAST.VEN_CLASS IS NOT NULL)
Try this:
SELECT APVENMAST.VENDOR_GROUP
, APVENMAST.VENDOR
, APVENMAST.VENDOR_VNAME
, APVENMAST.VENDOR_CONTCT
, APVENMAST.TAX_ID
, APVENADDR.ADDR1
FROM TEST.dbo.APVENMAST APVENMAST
INNER JOIN (
select VENDOR_GROUP, VENDOR, ADDR1
, row_number() over (partition by VENDOR_GROUP, VENDOR order by ADDR1) r
from TEST.dbo.APVENADDR
) APVENADDR
ON APVENADDR.VENDOR_GROUP = APVENMAST.VENDOR_GROUP
AND APVENADDR.VENDOR = APVENMAST.VENDOR
AND APVENADDR.r = 1
--do you need this table; you're not using it...
--INNER JOIN TEST.dbo.APVENLOC APVENLOC
--ON APVENMAST.VENDOR_GROUP = APVENLOC.VENDOR_GROUP
--AND APVENMAST.VENDOR = APVENLOC.VENDOR
WHERE APVENMAST.VEN_CLASS IS NOT NULL
--if the above inner join was to filter results, you can do this instead:
and exists (
select top 1 1
from TEST.dbo.APVENLOC APVENLOC
ON APVENMAST.VENDOR_GROUP = APVENLOC.VENDOR_GROUP
AND APVENMAST.VENDOR = APVENLOC.VENDOR
)
I found another column in the APVENLOC table that I can filter on to get the unique vendor. Turns out if the vendor address is for the main office, the vendor location is set blank.
Easier than I thought it would be!
SELECT DISTINCT APVENMAST.VENDOR_GROUP,
APVENMAST.VENDOR,
APVENMAST.VENDOR_VNAME,
APVENADDR.ADDR1,
APVENMAST.VENDOR_SNAME,
APVENADDR.LOCATION_CODE,
APVENMAST.VEN_CLASS
FROM TEST.dbo.APVENMAST APVENMAST
INNER JOIN TEST.dbo.APVENADDR APVENADDR
ON (APVENMAST.VENDOR_GROUP = APVENADDR.VENDOR_GROUP)
AND (APVENMAST.VENDOR = APVENADDR.VENDOR)
WHERE (APVENADDR.LOCATION_CODE = ' ')
Shaji
Ok here's my View (vw_LiftEquip)
SELECT dbo.tbl_equip_swl_unit.unit_id,
dbo.tbl_equip_swl_unit.unit_name,
dbo.tbl_equip_swl_unit.archived,
dbo.tbl_categories.category_id,
dbo.tbl_categories.categoryName,
dbo.tbl_categories.parentCategory,
dbo.tbl_categories.sub_category,
dbo.tbl_categories.desc_category,
dbo.tbl_categories.description,
dbo.tbl_categories.miscellaneous,
dbo.tbl_categories.category_archived,
dbo.tbl_equip_swl_unit.unit_name AS Expr1,
dbo.tbl_categories.categoryName AS Expr2,
dbo.tbl_categories.description AS Expr3,
dbo.tbl_equip_depts.dept_name,
dbo.tbl_equip_man.man_name,
dbo.tbl_Lifting_Gear.e_defects AS Expr7,
dbo.tbl_Lifting_Gear.e_defects_desc AS Expr8,
dbo.tbl_Lifting_Gear.e_defects_date AS Expr9,
dbo.tbl_equipment.equipment_id,
dbo.tbl_equipment.e_contract_no,
dbo.tbl_equipment.slID,
dbo.tbl_equipment.e_entered_by,
dbo.tbl_equipment.e_serial,
dbo.tbl_equipment.e_model,
dbo.tbl_equipment.e_description,
dbo.tbl_equipment.e_location_id,
dbo.tbl_equipment.e_owner_id,
dbo.tbl_equipment.e_department_id,
dbo.tbl_equipment.e_manafacture_id,
dbo.tbl_equipment.e_manDate1,
dbo.tbl_equipment.e_manDate2,
dbo.tbl_equipment.e_manDate3,
dbo.tbl_equipment.e_dimensions,
dbo.tbl_equipment.e_test_no,
dbo.tbl_equipment.e_firstDate1,
dbo.tbl_equipment.e_firstDate2,
dbo.tbl_equipment.e_firstDate3,
dbo.tbl_equipment.e_prevDate1,
dbo.tbl_equipment.e_prevDate2,
dbo.tbl_equipment.e_prevDate3,
dbo.tbl_equipment.e_insp_frequency,
dbo.tbl_equipment.e_swl,
dbo.tbl_equipment.e_swl_unit_id,
dbo.tbl_equipment.e_swl_notes,
dbo.tbl_equipment.e_cat_id,
dbo.tbl_equipment.e_sub_id,
dbo.tbl_equipment.e_parent_id,
dbo.tbl_equipment.e_last_inspector,
dbo.tbl_equipment.e_last_company,
dbo.tbl_equipment.e_deleted AS Expr11,
dbo.tbl_equipment.e_deleted_desc AS Expr12,
dbo.tbl_equipment.e_deleted_date AS Expr13,
dbo.tbl_equipment.e_deleted_insp AS Expr14,
dbo.tbl_Lifting_Gear.e_defects_action AS Expr15,
dbo.tbl_equipment.e_rig_location,
dbo.tbl_Lifting_Gear.e_add_type AS Expr17,
dbo.tbl_Lifting_Gear.con_id,
dbo.tbl_Lifting_Gear.lifting_date,
dbo.tbl_Lifting_Gear.lifting_ref_no,
dbo.tbl_Lifting_Gear.e_id,
dbo.tbl_Lifting_Gear.inspector_id,
dbo.tbl_Lifting_Gear.lift_testCert,
dbo.tbl_Lifting_Gear.lift_rig_location,
dbo.tbl_Lifting_Gear.inspected,
dbo.tbl_Lifting_Gear.lifting_through,
dbo.tbl_Lifting_Gear.liftingNDT,
dbo.tbl_Lifting_Gear.liftingTest,
dbo.tbl_Lifting_Gear.e_defects,
dbo.tbl_Lifting_Gear.e_defects_desc,
dbo.tbl_Lifting_Gear.e_defects_date,
dbo.tbl_Lifting_Gear.e_defects_action,
dbo.tbl_Lifting_Gear.lift_department_id,
dbo.tbl_Lifting_Gear.lifting_loc
FROM dbo.tbl_equipment
INNER JOIN dbo.tbl_equip_swl_unit
ON dbo.tbl_equipment.e_swl_unit_id = dbo.tbl_equip_swl_unit.unit_id
INNER JOIN dbo.tbl_categories
ON dbo.tbl_equipment.e_cat_id = dbo.tbl_categories.category_id
INNER JOIN dbo.tbl_equip_depts
ON dbo.tbl_equipment.e_department_id = dbo.tbl_equip_depts.dept_id
INNER JOIN dbo.tbl_equip_man
ON dbo.tbl_equipment.e_manafacture_id = dbo.tbl_equip_man.man_id
INNER JOIN dbo.vwSubCategory
ON dbo.tbl_equipment.e_sub_id = dbo.vwSubCategory.category_id
INNER JOIN dbo.vwDescCategory
ON dbo.tbl_equipment.e_cat_id = dbo.vwDescCategory.category_id
INNER JOIN dbo.tbl_Lifting_Gear
ON dbo.tbl_equipment.equipment_id = dbo.tbl_Lifting_Gear.e_id
And here's the select statement with subquery that I am using:
SELECT *
FROM vw_LiftEquip
WHERE lifting_loc = ? AND
con_id = ? AND
EXPR11 =
'N'(
SELECT MAX(lifting_date) AS maxLift
FROM vw_LiftEquip
WHERE e_id = equipment_id
)
ORDER BY lifting_ref_no,
category_id,
e_swl,
e_serial
I get the error :
Column "vw_LiftEquip.category_id" is invalid in the ORDER BY clause because it is not contained in either an aggregate function or the GROUP BY clause.
Can't see why its returning that error, this is admittedly the first time I've ran a subquery on such a complex view, and I am a bit lost, thanks in advance for any help. I have looked through the similar posts and can find no answers to this one, sorry if I am just being dumb.
You are missing AND between EXPR11 = 'N' and (SELECT MAX(...
Otherwise, it looks OK. MAX without GROUP BY is allowed if you have no other columns in the SELECT
Update: #hvd also noted that you have nothing to compare to MAX(lifting_date). See comment
Update 2,
SELECT *
FROM vw_LiftEquip v1
CROSS JOIN
(
SELECT MAX(lifting_date) AS maxLift
FROM vw_LiftEquip
WHERE e_id = equipment_id
) v2
WHERE v1.lifting_loc = ? AND
v1.con_id = ? AND
v1.EXPR11 = 'N'
ORDER BY v1.lifting_ref_no,
v1.category_id,
v1.e_swl,
v1.e_serial
I have the following SQL query:
SELECT VehicleRegistrations.ID, VehicleRegistrations.VehicleReg,
VehicleRegistrations.Phone, VehicleType.VehicleTypeDescription,
dt.ID AS 'CostID', dt.IVehHire, dt.FixedCostPerYear, dt.VehicleParts,
dt.MaintenancePerMile, dt.DateEffective
FROM VehicleRegistrations
INNER JOIN VehicleType ON VehicleRegistrations.VehicleType = VehicleType.ID
LEFT OUTER JOIN (SELECT TOP (1) ID, VehicleRegID, DateEffective, IVehHire,
FixedCostPerYear, VehicleParts, MaintenancePerMile
FROM VehicleFixedCosts
WHERE (DateEffective <= GETDATE())
ORDER BY DateEffective DESC) AS dt
ON dt.VehicleRegID = VehicleRegistrations.ID
What I basically want to do is always select the top 1 record from the 'VehicleFixedCosts' table, where the VehicleRegID matches the one in the main query. What is happening here is that it's selecting the top row before the join, so if the vehicle registration of the top row doesn't match the one we're joining to it returns nothing.
Any ideas? I really don't want to have use subselects for each of the columns I need to return
Try this:
SELECT vr.ID, vr.VehicleReg,
vr.Phone, VehicleType.VehicleTypeDescription,
dt.ID AS 'CostID', dt.IVehHire, dt.FixedCostPerYear, dt.VehicleParts,
dt.MaintenancePerMile, dt.DateEffective
FROM VehicleRegistrations vr
INNER JOIN VehicleType ON vr.VehicleType = VehicleType.ID
LEFT OUTER JOIN (
SELECT ID, VehicleRegID, DateEffective, IVehHire, FixedCostPerYear, VehicleParts, MaintenancePerMile
FROM VehicleFixedCosts vfc
JOIN (
select VehicleRegID, max(DateEffective) as DateEffective
from VehicleFixedCosts
where DateEffective <= getdate()
group by VehicleRegID
) t ON vfc.VehicleRegID = t.VehicleRegID and vfc.DateEffective = t.DateEffective
) AS dt
ON dt.VehicleRegID = vr.ID
Subquery underneath dt might need some grouping but without schema (and maybe sample data) it's hard to say which column should be involved in that.