I am using SQL Server 2008R2 and have tableA that has four columns res_id,res_id2,res_id3,res_id4 numeric.
I want to find away to find the occurrences of the same IDs on each row (the met column) excluding 0 or null
Example:
golf_id res_id res_id2 res_id3 res_id4 met
1579 2068252 2068252 NULL 0 1
1492 2076015 2076015 2076016 2076016 2
1494 2076046 2076046 2076046 2076047 2
1617 2077041 2077042 2077043 2077044 4
1545 2076102 2076102 NULL NULL 1
So in the first row I have only 2068252 so met should be 1
In the second row I have 2076015 and 2076016 so met should be 2
In the third row I have 2076046 and 2076047 so met should be 2
In the fourth row I have 2077041, 2077042, 2077043, 2077044 so met
should be 4
In the fifth row I have 2076102 so met should be 1
Thank you
A simple solution would be to unpivot your data, and then COUNT the DISTINCT values. I'm pretty sure this'll work on 2008 R2 (though I don't have access to such an instance, nor have had access to one for the best part of a decade).
WITH YourTable AS(
SELECT *
FROM (VALUES(1579,2068252,2068252,NULL ,0 ),
(1492,2076015,2076015,2076016,2076016),
(1494,2076046,2076046,2076046,2076047),
(1617,2077041,2077042,2077043,2077044),
(1545,2076102,2076102,NULL ,NULL ))V(golf_id,res_id,res_id2,res_id3,res_id4))
SELECT YT.golf_id,
YT.res_id,
YT.res_id2,
YT.res_id3,
YT.res_id4,
(SELECT COUNT(DISTINCT NULLIF(V.res_id,0))
FROM (VALUES(res_id),(res_id2),(res_id3),(res_id4))V(res_id)) met
FROM YourTable YT;
Generic way to do is something like this:
select
a.golf_id
, a.res_id
, a.res_id2
, a.res_id3
, a.res_id4
, b.met
from (
select b.golf_id, count(distinct res_id) as met
from (
select golf_id, res_id from tableA where res_id > 0
union all
select golf_id, res_id2 from tableA where res_id2 > 0
union all
select golf_id, res_id3 from tableA where res_id3 > 0
union all
select golf_id, res_id4 from tableA where res_id4 > 0
) as b
group by b.golf_id
) as b
join tableA as a
on a.golf_id = b.golf_id
Related
I already asked for help on a part of my problem here.
I used to get 10 rows no matter if there are filled or not. But now I'm facing something else where I need to do it multiple times in the same query result.
WITH NUMBERS AS
(
SELECT 1 rowNumber
UNION ALL
SELECT 2
UNION ALL
SELECT 3
UNION ALL
SELECT 4
UNION ALL
SELECT 5
UNION ALL
SELECT 6
UNION ALL
SELECT 7
UNION ALL
SELECT 8
UNION ALL
SELECT 9
UNION ALL
SELECT 10
)
SELECT DISTINCT sp.SLC_ID, c.rowNumber, c.PCE_ID
FROM SELECT_PART sp
LEFT JOIN (
SELECT b.*
FROM NUMBERS
LEFT OUTER JOIN (
SELECT a.*
FROM (
SELECT SELECT_PART.SLC_ID, ROW_NUMBER() OVER (ORDER BY SELECT_PART.SLC_ID) as
rowNumber, SELECT_PART.PCE_ID
FROM SELECT_PART
WHERE SELECT_PART.SLC_ID = (must be the same as sp.SLC_ID and can''t hardcode it)
) a
) b
ON b.rowNumber = NUMBERS.rowNumber
) c ON c.SLC_ID = sp.SLC_ID
ORDER BY sp.SLC_ID, c.rowNumber
It works fine for the first 10 lines, but next SLC_ID only got 1 empty line
I need it to be like that
SLC_ID rowNumer PCE_ID
1 1 0001
1 2 0002
1 3 NULL
1 ... ...
1 10 NULL
2 1 0011
2 2 0012
2 3 0013
2 ... ...
2 10 0020
3 1 0021
3 ... ...
Really need it that way to build a report.
Instead of manually building a query-specific number list where you have to include every possible number you need (1 through 10 in this case), create a numbers table.
DECLARE #UpperBound INT = 1000000;
;WITH cteN(Number) AS
(
SELECT ROW_NUMBER() OVER (ORDER BY s1.[object_id]) - 1
FROM sys.all_columns AS s1
CROSS JOIN sys.all_columns AS s2
)
SELECT [Number] INTO dbo.Numbers
FROM cteN WHERE [Number] <= #UpperBound;
CREATE UNIQUE CLUSTERED INDEX CIX_Number ON dbo.Numbers([Number])
WITH
(
FILLFACTOR = 100, -- in the event server default has been changed
DATA_COMPRESSION = ROW -- if Enterprise & table large enough to matter
);
Source: mssqltips
Alternatively, since you can't add data, use a table that already exists in SQL Server.
WITH NUMBERS AS
(
SELECT DISTINCT Number as rowNumber FROM master..spt_values where type = 'P'
)
SELECT DISTINCT sp.SLC_ID, c.rowNumber, c.PCE_ID
FROM SELECT_PART sp
LEFT JOIN (
SELECT b.*
FROM NUMBERS
LEFT OUTER JOIN (
SELECT a.*
FROM(
SELECT SELECT_PART.SLC_ID, ROW_NUMBER() OVER (ORDER BY SELECT_PART.SLC_ID) as
rowNumber, SELECT_PART.PCE_ID
FROM SELECT_PART
WHERE SELECT_PART.SLC_ID = (must be the same as sp.SLC_ID and can''t hardcode it)
) a
) b
ON b.rowNumber = NUMBERS.rowNumber
) c ON c.SLC_ID = sp.SLC_ID
ORDER BY sp.SLC_ID, c.rowNumber
NOTE: Max value for this solution is 2047
I am searching with a query
--Code Format
SELECT COLA,COLB,COLC from MYTABLE where SWITCH IN (1,2,3);
If MYTABLE does not contain rows with SWITCH 1,2 or 3 I need default values returned along with the SWITCH value. How do I do it?
Below is my table format
COLA | COLB | COLC | SWITCH
------------------------------
A B C 1
a b c 2
i want a query when I search with
select * from MYTABLE where switch in (1,2,3)
That gets results like this --
COLA | COLB | COLC | SWITCH
------------------------------
A B C 1
a b c 2
NA NA NA 3
--Check to see if any row exists matching your conditions
IF NOT EXISTS (SELECT COLA,COLB,COLC from MYTABLE where SWITCH IN (1,2,3))
BEGIN
--Select your default values
END
ELSE
BEGIN
--Found rows, return them
SELECT COLA,COLB,COLC from MYTABLE where SWITCH IN (1,2,3)
END
if not exists( SELECT 1 from MYTABLE where SWITCH IN (1,2,3))
select default_value
How about:
SELECT COLA,COLB,COLC from MYTABLE where SWITCH IN (1,2,3)
union select 5555, 6666, 7777 where not exists (
SELECT COLA,COLB,COLC from MYTABLE where SWITCH IN (1,2,3)
);
5555, 6666, 7777 being the default row in case there aren't any rows matching your criteria.
Here is one way to tackle this. You need a table of the SWITCH values you want to look at. Then a simple left join makes this super easy.
select ColA
, ColB
, ColC
v.Switch
from
(
values
(1)
, (2)
, (3)
)v (Switch)
left join YourTable yt on yt.Switch = v.Switch
You can Use a Split Function And Left Join As Shown Below:
Select ISNULL(ColA,'NA') As ColA,ISNULL(ColB,'NA') As ColB,ISNULL(ColC,'NA') As ColC,ISNULL(Switch,a.splitdata)
from [dbo].[fnSplitString]('1,2,3',',') a
LEFT JOIN #MYTABLE t on a.splitdata=t.Switch
[dbo].[fnSplitString] is a Split Function with 2 arguments - Delimeter Separated String and Delimeter and Output a Table.
EDIT:
Given the new explanation, I changed the answer completely. I think I got your question now:
SELECT * FROM MYTABLE AS mt
RIGHT JOIN (SELECT 1 AS s UNION SELECT 2 AS s UNION SELECT 3 AS s) AS st
ON st.s = mt.SWITCH
You could change the SELECT 1 AS s UNION SELECT 2 AS s UNION SELECT 3 AS spart to a subquery that results in all possible values SWITCH could assume. E.g.:
SELECT DISTINCT SWITCH FROM another_table_with_all_switches
If all want is the value of switch that is not in MYTABLE, not the whole table with null values, you could try:
SELECT * FROM
(SELECT 1 AS s UNION SELECT 2 AS s UNION SELECT 3) AS st
WHERE st.s NOT IN (SELECT DISTINCT SWITCH FROM MYTABLE)
I have this table MyTable:
PROG VALUE
-------------
1 aaaaa
1 bbbbb
2 ccccc
4 ddddd
4 eeeee
now I'm checking the existence of a tuple with a certain id with a query like
SELECT COUNT(1) AS IT_EXISTS
FROM MyTable
WHERE ROWNUM = 1 AND PROG = {aProg}
For example I obtain with aProg = 1 :
IT_EXISTS
---------
1
I get with aProg = 3 :
IT_EXISTS
---------
0
The problem is that I must do multiple queries, one for every value of PROG to check.
What I want is something that with a query like
SELECT PROG, ??? AS IT_EXISTS
FROM MyTable
WHERE PROG IN {1, 2,3, 4, 5} AND {some other condition}
I can get something like
PROG IT_EXISTS
------------------
1 1
2 1
3 0
4 1
5 0
The database is Oracle...
Hope I'm clear
regards
Paolo
Take a step back and ask yourself this: Do you really need to return the rows that don't exist to solve your problem? I suspect the answer is no. Your application logic can determine that records were not returned which will allow you to simplify your query.
SELECT PROG
FROM MyTable
WHERE PROG IN (1, 2, 3, 4, 5)
If you get a row back for a given PROG value, it exists. If not, it doesn't exist.
Update:
In your comment in the question above, you stated:
the prog values are from others tables. The table of the question has only a subset of the all prog values
This suggests to me that a simple left outer join could do the trick. Assuming your other table with the PROG values you're interested in is called MyOtherTable, something like this should work:
SELECT a.PROG,
CASE WHEN b.PROG IS NOT NULL THEN 1 ELSE 0 END AS IT_EXISTS
FROM MyOtherTable AS a
LEFT OUTER JOIN MyTable AS b ON b.PROG = a.PROG
A WHERE clause could be tacked on to the end if you need to do some further filtering.
I would recommend something like this. If at most one row can match a prog in your table:
select p.prog,
(case when t.prog is null then 0 else 1 end) as it_exists
from (select 1 as prog from dual union all
select 2 as prog from dual union all
select 3 as prog from dual union all
select 4 as prog from dual union all
select 5 as prog from dual
) p left join
mytable t
on p.prog = t.prog and <some conditions>;
If more than one row could match, you'll want to use aggregation to avoid duplicates:
select p.prog,
max(case when t.prog is null then 0 else 1 end) as it_exists
from (select 1 as prog from dual union all
select 2 as prog from dual union all
select 3 as prog from dual union all
select 4 as prog from dual union all
select 5 as prog from dual
) p left join
mytable t
on p.prog = t.prog and <some conditions>
group by p.prog
order by p.prog;
One solution is to use (arguably abuse) a hierarchical query to create an arbitrarily long list of numbers (in my example, I've set the largest number to max(PROG), but you could hardcode this if you knew the top range you were looking for). Then select from that list and use EXISTS to check if it exists in MYTABLE.
select
PROG
, case when exists (select 1 from MYTABLE where PROG = A.PROG) then 1 else 0 end IT_EXISTS
from (
select level PROG
from dual
connect by level <= (select max(PROG) from MYTABLE) --Or hardcode, if you have a max range in mind
) A
;
It's still not very clear where you get the prog values to check. But if you can read them from a table, and assuming that the table doesn't contain duplicate prog values, this is the query I would use:
select a.prog, case when b.prog is null then 0 else 1 end as it_exists
from prog_values_to_check a
left join prog_values_to_check b
on a.prog = b.prog
and exists (select null
from MyTable t
where t.prog = b.prog)
If you do need to hard code the values, you can do it rather simply by taking advantage of the SYS.DBMS_DEBUG_VC2COLL function, which allows you to convert a comma-delimited list of values into rows.
with prog_values_to_check(prog) as (
select to_number(column_value) as prog
from table(SYS.DBMS_DEBUG_VC2COLL(1, 2, 3, 4, 5, 6, 7, 8, 9, 10)) -- type your values here
)
select a.prog, case when b.prog is null then 0 else 1 end as it_exists
from prog_values_to_check a
left join prog_values_to_check b
on a.prog = b.prog
and exists (select null
from MyTable t
where t.prog = b.prog)
Note: The above queries take into account that the MyTable table may have multiple rows with the same prog value, but that you only want one row in the result. I make this assumption based the WHERE ROWNUM = 1 condition in your question.
I have following table:
ID Data
1 A
2 A
2 B
3 A
3 B
4 C
5 D
6 A
6 B
etc. In other words, I have groups of data per ID. You will notice that the data group (A, B) occurs multiple times. I want a query that can identify the distinct data groups and number them, such as:
DataID Data
101 A
102 A
102 B
103 C
104 D
So DataID 102 would resemble data (A,B), DataID 103 would resemble data (C), etc. In order to be able to rewrite my original table in this form:
ID DataID
1 101
2 102
3 102
4 103
5 104
6 102
How can I do that?
PS. Code to generate the first table:
CREATE TABLE #t1 (id INT, data VARCHAR(10))
INSERT INTO #t1
SELECT 1, 'A'
UNION ALL SELECT 2, 'A'
UNION ALL SELECT 2, 'B'
UNION ALL SELECT 3, 'A'
UNION ALL SELECT 3, 'B'
UNION ALL SELECT 4, 'C'
UNION ALL SELECT 5, 'D'
UNION ALL SELECT 6, 'A'
UNION ALL SELECT 6, 'B'
In my opinion You have to create a custom aggregate that concatenates data (in case of strings CLR approach is recommended for perf reasons).
Then I would group by ID and select distinct from the grouping, adding a row_number()function or add a dense_rank() your choice. Anyway it should look like this
with groupings as (
select concat(data) groups
from Table1
group by ID
)
select groups, rownumber() over () from groupings
The following query using CASE will give you the result shown below.
From there on, getting the distinct datagroups and proceeding further should not really be a problem.
SELECT
id,
MAX(CASE data WHEN 'A' THEN data ELSE '' END) +
MAX(CASE data WHEN 'B' THEN data ELSE '' END) +
MAX(CASE data WHEN 'C' THEN data ELSE '' END) +
MAX(CASE data WHEN 'D' THEN data ELSE '' END) AS DataGroups
FROM t1
GROUP BY id
ID DataGroups
1 A
2 AB
3 AB
4 C
5 D
6 AB
However, this kind of logic will only work in case you the "Data" values are both fixed and known before hand.
In your case, you do say that is the case. However, considering that you also say that they are 1000 of them, this will be frankly, a ridiculous looking query for sure :-)
LuckyLuke's suggestion above would, frankly, be the more generic way and probably saner way to go about implementing the solution though in your case.
From your sample data (having added the missing 2,'A' tuple, the following gives the renumbered (and uniqueified) data:
with NonDups as (
select t1.id
from #t1 t1 left join #t1 t2
on t1.id > t2.id and t1.data = t2.data
group by t1.id
having COUNT(t1.data) > COUNT(t2.data)
), DataAddedBack as (
select ID,data
from #t1 where id in (select id from NonDups)
), Renumbered as (
select DENSE_RANK() OVER (ORDER BY id) as ID,Data from DataAddedBack
)
select * from Renumbered
Giving:
1 A
2 A
2 B
3 C
4 D
I think then, it's a matter of relational division to match up rows from this output with the rows in the original table.
Just to share my own dirty solution that I'm using for the moment:
SELECT DISTINCT t1.id, D.data
FROM #t1 t1
CROSS APPLY (
SELECT CAST(Data AS VARCHAR) + ','
FROM #t1 t2
WHERE t2.id = t1.id
ORDER BY Data ASC
FOR XML PATH('') )
D ( Data )
And then going analog to LuckyLuke's solution.
Let's say I have an sql server table:
NumberTaken CompanyName
2 Fred 3 Fred 4 Fred 6 Fred 7 Fred 8 Fred 11 Fred
I need an efficient way to pass in a parameter [StartingNumber] and to count from [StartingNumber] sequentially until I find a number that is missing.
For example notice that 1, 5, 9 and 10 are missing from the table.
If I supplied the parameter [StartingNumber] = 1, it would check to see if 1 exists, if it does it would check to see if 2 exists and so on and so forth so 1 would be returned here.
If [StartNumber] = 6 the function would return 9.
In c# pseudo code it would basically be:
int ctr = [StartingNumber]
while([SELECT NumberTaken FROM tblNumbers Where NumberTaken = ctr] != null)
ctr++;
return ctr;
The problem with that code is that is seems really inefficient if there are thousands of numbers in the table. Also, I can write it in c# code or in a stored procedure whichever is more efficient.
Thanks for the help
A solution using JOIN:
select min(r1.NumberTaken) + 1
from MyTable r1
left outer join MyTable r2 on r2.NumberTaken = r1.NumberTaken + 1
where r1.NumberTaken >= 1 --your starting number
and r2.NumberTaken is null
I called my table Blank, and used the following:
declare #StartOffset int = 2
; With Missing as (
select #StartOffset as N where not exists(select * from Blank where ID = #StartOffset)
), Sequence as (
select #StartOffset as N from Blank where ID = #StartOffset
union all
select b.ID from Blank b inner join Sequence s on b.ID = s.N + 1
)
select COALESCE((select N from Missing),(select MAX(N)+1 from Sequence))
You basically have two cases - either your starting value is missing (so the Missing CTE will contain one row), or it's present, so you count forwards using a recursive CTE (Sequence), and take the max from that and add 1
Edit from comment. Yes, create another CTE at the top that has your filter criteria, then use that in the rest of the query:
declare #StartOffset int = 2
; With BlankFilters as (
select ID from Blank where hasEntered <> 1
), Missing as (
select #StartOffset as N where not exists(select * from BlankFilters where ID = #StartOffset)
), Sequence as (
select #StartOffset as N from BlankFilters where ID = #StartOffset
union all
select b.ID from BlankFilters b inner join Sequence s on b.ID = s.N + 1
)
select COALESCE((select N from Missing),(select MAX(N)+1 from Sequence))
this may now return a row that does exist in the table, but hasEntered=1
Tables:
create table Blank (
ID int not null,
Name varchar(20) not null
)
insert into Blank(ID,Name)
select 2 ,'Fred' union all
select 3 ,'Fred' union all
select 4 ,'Fred' union all
select 6 ,'Fred' union all
select 7 ,'Fred' union all
select 8 ,'Fred' union all
select 11 ,'Fred'
go
Try the set based approach - should be faster
select min(t1.NumberTaken)+1 as "min_missing" from t t1
where not exists (select 1 from t t2
where t1.NumberTaken = t2.NumberTaken+1)
and t1.NumberTaken > #StartingNumber
This is Sybase syntax, so massage for SQL server consumption if needed.
Create a temp table with all numbers from StartingValue to EndValue and LEFT OUTER JOIN to your data table.