I want to know how to handle the skewed data which contains a particular column that has multiple categorical values. Some of these values have more value_counts() than others.
As you can see in this data the values greater than 7 have value counts lot less than others. How to handle this kind of skewed data? (This is not the target variable. I want to know about skewed independent variable)
I tried changing ' these smaller count values to a particular value (-1). That way I got count of -1 comparable to other values. But training classification model on this data will affect the accuracy.
Oversampling techniques for minority classes/categories may not work well in many scenarios. You could read more about them here.
One thing you could do is to assign different weights to samples from different classes in your model's loss function, inversely proportional to their frequencies. This would ensure that even classes with few datapoints will equally affect the model's loss, as compared to classes with large number of datapoints.
You could share more details about the dataset or the specific model that you are using, to get more specific suggestions/solutions.
Related
I'm developing a regression model. But I ran into a problem when preparing the data. 17 out of 20 signs are categorical, and there are a lot of categories in each of them. Using one-hot-encoding, my data table is transformed into a 10000x6000 table. How should I prepare this type of data?
I used PCA, trying to reduce the dimension, but even 70% of the variance is in 2500 features. That's why I joined.
Unfortunately, I can't attach the dataset, as it is confidential
How do I prepare the data to achieve the best results in the learning process?
Can the data be mapped more accurately in a non-linear manner? If so, you might want to try using an autoencoder for dimensionality reduction.
One thing to note about PCA is that it computes an orthogonal projection of the data into linear space. This means that it only gives a linear mapping of the data. Autoencoders, on the other hand, can give you a non-linear mapping, and so is able to represent a greater amount of variance in the data in fewer dimensions. Just be sure to use non-linear activation functions in your autoencoder architecture.
It really depends on exactly what you are trying to do. Getting a covariance matrix (and also PCA decomp.) will give you great insight about which classes tend to come together (and this requires one-hot encoded categories), but training a model off of that might be problematic.
In general, it really depends on the model you want to use.
One option would be a random forest. They can definitely be used for regression, though they need to be trained specifically for that. SKLearn has a class just for this:
https://scikit-learn.org/stable/modules/generated/sklearn.ensemble.RandomForestRegressor.html
The benifits of random forest is that it is great for tabular data (as is the case here), and can easily be trained using numerical values for class features, meaning your data vector can only be of dimension 20!
Decision tree models (such as random forest) are being shown to out-preform deep-learning in many cases, and this may be one of them.
TLDR; If you use a random forest, it can take learn even with numerical values for categories, and you can avoid creating incredibly large vectors for data.
Here's the situation I am worrying about.
Let me say I have a model trained with min-max scaled data. I want to test my model, so I also scaled the test dataset with my old scaler which was used in the training stage. However, my new test data's turned out to be the newer minimum, so the scaler returned negative value.
As far as I know, minimum and maximum aren't that stable value, especially in the volatile dataset such as cryptocurrency data. In this case, should I update my scaler? Or should I retrain my model?
I happen to disagree with #Sharan_Sundar. The point of scaling is to bring all of your features onto a single scale, not to rigorously ensure that they lie in the interval [0,1]. This can be very important, especially when considering regularization techniques the penalize large coefficients (whether they be linear regression coefficients or neural network weights). The combination of feature scaling and regularization help to ensure your model generalizes to unobserved data.
Scaling based on your "test" data is not a great idea because in practice, as you pointed out, you can easily observe new data points that don't lie within the bounds of your original observations. Your model needs to be robust to this.
In general, I would recommend considering different scaling routines. scikitlearn's MinMaxScaler is one, as is StandardScaler (subtract mean and divide by standard deviation). In the case where your target variable, cryptocurrency price can vary over multiple orders of magnitude, it might be worth using the logarithm function for scaling some of your variables. This is where data science becomes an art -- there's not necessarily a 'right' answer here.
(EDIT) - Also see: Do you apply min max scaling separately on training and test data?
Ideally you should scale first and then only split into test and train. But its not preferable to use minmax scaler with data which can have dynamically varying min and max values with significant variance in realtime scenario.
I am given a data that consists of N sequences of variable lengths of hidden variables and their corresponding observed variables (i.e., I have both the hidden variables and the observed variables for each sequence).
Is there a way to find the order K of the "best" HMM model for this data, without exhaustive search? (justified heuristics are also legitimate).
I think there may be a confusion about the word "order":
A first-order HMM is an HMM which transition matrix depends only on the previous state. A 2nd-order HMM is an HMM which transition matrix depends only on the 2 previous states, and so on. As the order increases, the theory gets "thicker" (i.e., the equations) and very few implementations of such complex models are implemented in mainstream libraries.
A search on your favorite browser with the keywords "second-order HMM" will bring you to meaningful readings about these models.
If by order you mean the number of states, and with the assumptions that you use single distributions assigned to each state (i.e., you do not use HMMs with mixtures of distributions) then, indeed the only hyperparameter you need to tune is the number of states.
You can estimate the optimal number of states using criteria such as the Bayesian Information Criterion, the Akaike Information Criterion, or the Minimum Message Length Criterion which are based on model's likelihood computations. Usually, the use of these criteria necessitates training multiple models in order to be able to compute some meaningful likelihood results to compare.
If you just want to get a blur idea of a good K value that may not be optimal, a k-means clustering combined with the percentage of variance explained can do the trick: if X clusters explain more than, let say, 90% of the variance of the observations in your training set then, going with an X-state HMM is a good start. The 3 first criteria are interesting because they include a penalty term that goes with the number of parameters of the model and can therefore prevent some overfitting.
These criteria can also be applied when one uses mixture-based HMMs, in which case there are more hyperparameters to tune (i.e., the number of states and the number of component of the mixture models).
I have a dataset with lots of features (mostly categorical features(Yes/No)) and lots of missing values.
One of the techniques for dimensionality reduction is to generate a large and carefully constructed set of trees against a target attribute and then use each attribute’s usage statistics to find the most informative subset of features. That is basically we can generate a large set of very shallow trees, with each tree being trained on a small fraction of the total number of attributes. If an attribute is often selected as best split, it is most likely an informative feature to retain.
I am also using an imputer to fill the missing values.
My doubt is what should be the order to the above two. Which of the above two (dimensionality reduction and imputation) to do first and why?
From mathematical perspective you should always avoid data imputation (in the sense - use it only if you have to). In other words - if you have a method which can work with missing values - use it (if you do not - you are left with data imputation).
Data imputation is nearly always heavily biased, it has been shown so many times, I believe that I even read paper about it which is ~20 years old. In general - in order to do a statistically sound data imputation you need to fit a very good generative model. Just imputing "most common", mean value etc. makes assumptions about the data of similar strength to the Naive Bayes.
I use the python implementation of XGBoost. One of the objectives is rank:pairwise and it minimizes the pairwise loss (Documentation). However, it does not say anything about the scope of the output. I see numbers between -10 and 10, but can it be in principle -inf to inf?
good question. you may have a look in kaggle competition:
Actually, in Learning to Rank field, we are trying to predict the relative score for each document to a specific query. That is, this is not a regression problem or classification problem. Hence, if a document, attached to a query, gets a negative predict score, it means and only means that it's relatively less relative to the query, when comparing to other document(s), with positive scores.
It gives predicted score for ranking.
However, the scores are valid for ranking only in their own groups.
So we must set the groups for input data.
For esay ranking, refer to my project xgboostExtension
If I understand your questions correctly, you mean the output of the predict function on a model fitted using rank:pairwise.
Predict gives the predicted variable (y_hat).
This is the same for reg:linear / binary:logistic etc. The only difference is that reg:linear builds trees to Min(RMSE(y, y_hat)), while rank:pairwise build trees to Max(Map(Rank(y), Rank(y_hat))). However, output is always y_hat.
Depending on the values of your dependent variables, output can be anything. But I typically expect output to be much smaller in variance vs the dependent variable. This is usually the case as it is not necessary to fit extreme data values, the tree just needs to produce predictors that are large/small enough to be ranked first/last in the group.