This is my SQL code where I'm creating a join.
Now when I run it, I get an error:
Ambiguous column name 'Venue_code'
How do I fix this?
SELECT
Venue_name, Customer_name, Checkin_date, nights
FROM
Venues, Customers, Accomodation_booking
WHERE
Venues.Venue_code = Accomodation_booking.Venue_code
AND Customers.Customer_ID = Accomodation_booking.Customer_ID
AND Venue_code Code = 'V0001';
The last line looks suspicious. If you meant Venue_code = 'V0001' then remove Code and change Venue_code to either Venues.Venue_code or Accomodation_booking.Venue_code.
You probably had difficulties because you use SO for the first time. The code does not look clean. Remove the enter code here part too (end of second line).
If you join two (or more) tables and one or more column names are used in more than one table you need to prefix it but you didn't do it in your last line. It seems there is more than one error
AND Venue_code Code = 'V0001';
did you mean?
AND Venues.Venue_code = 'V0001';
Related
I'm trying to create new view from 2 different table of same schema. This is my query, let me know if I'm missing anything. When I check the syntax it is fine and test it, throws 00933 error.
CREATE OR REPLACE FORCE VIEW "APDA"."countview"
(
"dealidint", "companyidint", "nametxt", "county", "street",
"state", "city", "zip", "geocodelatdec", "geocodelongdec",
"volidint", "reportdate", "vehicletotalint", "salvagetotalint"
)
AS
SELECT a."dealidint",
a."companyidint",
a."nametxt",
a."county",
a."street",
a."state",
a."city",
a."zip",
a."geocodelatdec",
a."geocodelongdec",
c."dealervolumeidint",
c."reportdate",
c."vehicletotalint",
c."salvagetotalint"
FROM "APDA"."company" a
JOIN
"APDA"."volume" c
ON c."dealidint" = a."dealidint";
I don't see the reason. The only suspect thing I notice is the two blank lines. In SQLPlus I don't think these would cause this error, but they would cause the command to be misinterpreted.
My suggestions are:
- try a different tool. If you are getting the error in SQL Developer, try it in SQLPlus. It won't necessarily work, but you might get different feedback.
- reduce it to a minimal statement that works, then add elements back in one at a time until the error occurs
your column name "volidint" not in selected column, i see "dealervolumeidint" select vs "volidint".
Column name "volidint" is not available in your below select query. Please correct that by using "As".
CREATE OR REPLACE FORCE VIEW "APDA"."countview"
(
"dealidint", "companyidint", "nametxt", "county", "street",
"state", "city", "zip", "geocodelatdec", "geocodelongdec",
"volidint", "reportdate", "vehicletotalint", "salvagetotalint"
)
AS
SELECT a."dealidint",
a."companyidint",
a."nametxt",
a."county",
a."street",
a."state",
a."city",
a."zip",
a."geocodelatdec",
a."geocodelongdec",
c."dealervolumeidint" as "volidint",
c."reportdate",
c."vehicletotalint",
c."salvagetotalint"
FROM "APDA"."company" a
JOIN
"APDA"."volume" c
ON c."dealidint" = a."dealidint";
Thanks to all you pitched to answer my query. The one I have shared is a stripped down query with the same syntax. The query was fine but my actual query has an extra character on the join. Which is like - "APDA"."vvolume".
After that I was able to create the view.
Thanks again.
I have a following table:
EstimatedCurrentRevenue -- Revenue column value of yesterday
EstimatedPreviousRevenue --- Revenue column value of current day
crmId
OwnerId
PercentageChange.
I am querying two snapshots of the similarly structured data in Azure data lake and trying to query the percentage change in Revenue.
Following is my query i am trying to join on OpportunityId to get the difference between the revenue values:
#opportunityRevenueData = SELECT (((opty.EstimatedCurrentRevenue - optyPrevious.EstimatedPreviousRevenue)*100)/opty.EstimatedCurrentRevenue) AS PercentageRevenueChange, optyPrevious.EstimatedPreviousRevenue,
opty.EstimatedCurrentRevenue, opty.crmId, opty.OwnerId From #opportunityCurrentData AS opty JOIN #opportunityPreviousData AS optyPrevious on opty.OpportunityId == optyPrevious.OpportunityId;
But i get the following error:
E_CSC_USER_SYNTAXERROR: syntax error. Expected one of: AS EXCEPT FROM
GROUP HAVING INTERSECT OPTION ORDER OUTER UNION UNION WHERE ';' ')'
','
at token 'From', line 40
near the ###:
This expression is having the problem i know but not sure how to fix it.
(((opty.EstimatedCurrentRevenue - optyPrevious.EstimatedPreviousRevenue)*100)/opty.EstimatedCurrentRevenue)
Please help, i am completely new to U-sql
U-SQL is case-sensitive (as per here) with all SQL reserved words in UPPER CASE. So you should capitalise the FROM and ON keywords in your statement, like this:
#opportunityRevenueData =
SELECT (((opty.EstimatedCurrentRevenue - optyPrevious.EstimatedPreviousRevenue) * 100) / opty.EstimatedCurrentRevenue) AS PercentageRevenueChange,
optyPrevious.EstimatedPreviousRevenue,
opty.EstimatedCurrentRevenue,
opty.crmId,
opty.OwnerId
FROM #opportunityCurrentData AS opty
JOIN
#opportunityPreviousData AS optyPrevious
ON opty.OpportunityId == optyPrevious.OpportunityId;
Also, if you are completely new to U-SQL, you should consider working through some tutorials to establish the basics of the language, including case-sensitivity. Start at http://usql.io/.
This same crazy sounding error message can occur for (almost?) any USQL syntax error. The answer above was clearly correct for the provided code.
However since many folks will probably get to this page from a search for 'AS EXCEPT FROM GROUP HAVING INTERSECT OPTION ORDER OUTER UNION UNION WHERE', I'd say the best advice to handle these is look closely at the snippet of your code that the error message has marked with '###'.
For example I got to this page upon getting a syntax error for a long query and it turned out I didn't have a casing issue, but just a malformed query with parens around the wrong thing. Once I looked more closely at where in the snippet the ### symbol was, the error became clear.
I have two queries which are almost identical. The only difference is the format of the fields being joined. One works, the other doesn't.
The query which JOINs two Integer fields works perfectly.
The query which JOINs two Long Text fields produces the following error:
"Cannot join on Memo, OLE, or Hyperlink Object (alarmlogwithstring2.[Tag_Value]=ECLString.[Tag_Value])."
Functional Query:
SELECT alarmlogwithdescs.TableIndex, alarmlogwithdescs.Date_Stamp, alarmlogwithdescs.Time_Stamp, alarmlogwithdescs.Tag_Name, alarmlogwithdescs.Tag_Value, ErrorCodeLookup.ErrorDescription
FROM ErrorCodeLookup INNER JOIN alarmlogwithdescs ON ErrorCodeLookup.[Tag_Value] = alarmlogwithdescs.[Tag_Value]
ORDER BY alarmlogwithdescs.TableIndex;
Nonfunctional Query:
SELECT alarmlogwithstring2.TableIndex, alarmlogwithstring2.Date_Stamp, alarmlogwithstring2.Time_Stamp, alarmlogwithstring2.Tag_Value, ECLString.ErrorDescription
FROM alarmlogwithstring2 INNER JOIN ECLString ON alarmlogwithstring2.[Tag_Value] = ECLString.[Tag_Value]
ORDER BY alarmlogwithstring2.TableIndex;
What I've Tried:
1.) I swapped the table following "FROM" to be ECLString with all necessary changes that should follow. (i.e. Then, after INNER JOIN I changed ECLString to be alarmlogwithstring2, etc...) This makes the two queries more identical, but shouldn't have an effect on the outcome. I did the same for the functional query just to be sure. The functional one still worked and the nonfunctional one still does not...
2.) I tried making my lookup table's Tag_Value field Short Text while keeping the actual data table's Tag_Value field Long Text. No effect.
3.) I tried changing the JOIN type when creating the relationship between the two tables. No effect.
4.) Changed alarmlogwithstring2.[Tag_Value]=ECLString.[Tag_Value]
to CAST(alarmlogwithstring2.[Tag_Value] AS varchar(max)) = CAST(ECLString.[Tag_Value] AS varchar(max)) and get the following error:
"Syntax error (missing operator) in query expression CAST(alarmlogwithstring2.[Tag_Value] AS varchar(max)) = CAST(ECLString.[Tag_Value] AS varchar(max))."
For whatever reason, after clicking "Ok" to close the error message the comma following SELECT alarmlogwithstring2.TableIndex, is highlighted, suggesting the missing operator is there. Okay?
Any help would be greatly appreciated. Thank you for your time!
Got it! Works for my situation, at least. Any other method for doing this would still be appreciated.
This works for me because my Tag_Value field contains text such as "Error0, Error1, Error2," etc...
So, I used the following code:
SELECT alarmlogwithstring2.TableIndex, alarmlogwithstring2.Date_Stamp, alarmlogwithstring2.Time_Stamp, alarmlogwithstring2.Tag_Value, ECLString.ErrorDescription
FROM alarmlogwithstring2 INNER JOIN ECLString ON Right( alarmlogwithstring2.[Tag_Value] , 1) = Right(ECLString.[Tag_Value], 1)
ORDER BY alarmlogwithstring2.TableIndex;
This works because of the integer on the end of my Tag_Value text. Using the Right(string,length) function causes only the integers within each value to be compared as they're all on the right-side of the value.
If your situation is similar to mine, then the code above is fine; however, if your number of error codes (or whatever) gets into the double digits, be sure to reflect this in the fields of both tables. (i.e. Make Error0 => Error00, make Error1 => Error01, etc...) within both tables and use Right(string,2) instead of Right(string,1). [Seems obvious, but may not be for everyone.]
However, this will NOT always be the case for me and everyone else. Someone may have pure text, for example. Thus, again, if you know of another, more general, solution, please, do let me know and I'll make your answer the answer for this question.
Thanks!
Got it. See below for general solution. It uses StrComp(string1,string2)=0 to match strings.
SELECT alarmlogwithstring2.TableIndex, alarmlogwithstring2.Date_Stamp, alarmlogwithstring2.Time_Stamp, alarmlogwithstring2.Tag_Name, alarmlogwithstring2.Tag_Value, ECLString.ErrorDescription
FROM alarmlogwithstring2 INNER JOIN ECLString ON StrComp(alarmlogwithstring2.[Tag_Value], ECLString.[Tag_Value]) = 0
ORDER BY alarmlogwithstring2.TableIndex;
This is my sql command:
select INCOME_TYPE_ID,
REGION_CODE,
FIN_YEAR_CODE,
PORTION_AMOUNT
from INCOME.INCOME_TYPE,
COMMON.REGION,
INCOME.RECEIVE_DOC_PORTION,
INCOME.ASSESS_ORDER_ITEM,
ACCOUNTING.VOUCHER_ITEM_RECEIVE_DOC,
ACCOUNTING.VOUCHER_ITEM,
ACCOUNTING.VOUCHER,
ACCOUNTING.FIN_YEAR
where INCOME.RECEIVE_DOC_PORTION.ASSESS_ORDER_ITEM_ID = INCOME.ASSESS_ORDER_ITEM.ASSESS_ORDER_ITEM_ID
and INCOME.ASSESS_ORDER_ITEM.INCOME_TYPE_ID=INCOME.INCOME_TYPE.INCOME_TYPE_ID
and INCOME.RECEIVE_DOC_PORTION.RECEIVE_DOC_PORTION_ID = ACCOUNTING.VOUCHER_ITEM_RECEIVE_DOC.RECEIVE_DOC_PORTION_ID
and ACCOUNTING.VOUCHER_ITEM_RECEIVE_DOC.VOUCHER_ITEM_ID = ACCOUNTING.VOUCHER_ITEM.VOUCHER_ITEM_ID
and ACCOUNTING.VOUCHER_ITEM.VOUCHER_ID = ACCOUNTING.VOUCHER.VOUCHER_ID
and ACCOUNTING.VOUCHER.REGION_CODE = COMMON.REGION.REGION_CODE
and ACCOUNTING.VOUCHER.FIN_YEAR_CODE = ACCOUNTING.FIN_YEAR.FIN_YEAR_CODE
and I got this error:
Ambiguous Columns Defined
I'm Using SQL Developer as Oracle client.
Apparently one (or more) column names in your select list exists in more than one table of the FROM list.
You need to prefix every column in the SELECT list with the table it's coming from (it's also a good practice to always do that, regardless of the fact if they are ambigous)
Mention name of table before every column in select query.
Ambiguous column means that you have more than one column with the same name in one of the SELECT statements.
Try this instead, prefgixing all selected columns with their fully qualified names (as you have done elsewhere in your SELECT):
select INCOME.INCOME_TYPE.INCOME_TYPE_ID,
COMMON.REGION.REGION_CODE,
ACCOUNTING.FIN_YEAR.FIN_YEAR_CODE,
ACCOUNTING.VOUCHER_ITEM_RECEIVE_DOC.PORTION_AMOUNT
from INCOME.INCOME_TYPE,
COMMON.REGION,
INCOME.RECEIVE_DOC_PORTION,
INCOME.ASSESS_ORDER_ITEM,
ACCOUNTING.VOUCHER_ITEM_RECEIVE_DOC,
ACCOUNTING.VOUCHER_ITEM,
ACCOUNTING.VOUCHER,
ACCOUNTING.FIN_YEAR
where INCOME.RECEIVE_DOC_PORTION.ASSESS_ORDER_ITEM_ID = INCOME.ASSESS_ORDER_ITEM.ASSESS_ORDER_ITEM_ID
and INCOME.ASSESS_ORDER_ITEM.INCOME_TYPE_ID = INCOME.INCOME_TYPE.INCOME_TYPE_ID
and INCOME.RECEIVE_DOC_PORTION.RECEIVE_DOC_PORTION_ID = ACCOUNTING.VOUCHER_ITEM_RECEIVE_DOC.RECEIVE_DOC_PORTION_ID
and ACCOUNTING.VOUCHER_ITEM_RECEIVE_DOC.VOUCHER_ITEM_ID = ACCOUNTING.VOUCHER_ITEM.VOUCHER_ITEM_ID
and ACCOUNTING.VOUCHER_ITEM.VOUCHER_ID = ACCOUNTING.VOUCHER.VOUCHER_ID
and ACCOUNTING.VOUCHER.REGION_CODE = COMMON.REGION.REGION_CODE
and ACCOUNTING.VOUCHER.FIN_YEAR_CODE = ACCOUNTING.FIN_YEAR.FIN_YEAR_CODE
I had to guess the filly qualified name for
ACCOUNTING.VOUCHER_ITEM_RECEIVE_DOC.PORTION_AMOUNT
It might be
INCOME.RECEIVE_DOC_PORTION.PORTION_AMOUNT
But you should be able to resolve that easily.
Hope it helps...
Im trying to run the sql such as:
select 'TransactionId='|| ||',USER_DATA='|| from bla..bla.
the problem here is that the userdata () has very long values and results are shown as in the notepad ( and even very deterioted in excel):
TransactionId=12385031681, USER_DATA=This product
brought to you by
P&G
SMS, < coumn3 > ...bla.bla
Now, i need to fix the value fetched in USER_DATA into one line rather than number of lines.
Can you please advise ?
Try to remove line breaks with replace:
replace(replace(USER_DATA,chr(10),''),chr(13),'')