I’m trying to create numbered/bulleted lists but I want to be able to set which number format to use, example LOWER_LETTER, UPPER_LETTER, UPPER_ROMAN, etc.
I referred to this: http://useof.org/java-open-source/org.docx4j.wml.NumFmt to create a numbering object but I’m not sure how to insert this in the word doc - the doc keeps erroring out when I do something like:
paragraph1.getContent().add(numbering);
or wordMLPackage.getMainDocumentPart().addObject(numbering); .
Is there a better way to set which numbering format to use, or is there a way to get the NumberFormat object into the word doc? Thanks
In your numbering part, you need to create a w:num; see http://webapp.docx4java.org/OnlineDemo/ecma376/WordML/num.html
Such a Numbering Definition Instance must reference an http://webapp.docx4java.org/OnlineDemo/ecma376/WordML/abstractNum.html (either one which is there already), or a new one. Think of these as counters which increment each time a w:num in the docx uses them. That is, all w:num which use the same abstractNum increment the one counter.
To create these objects in your numbering definitions part, its easiest to use Word to get what you want, then upload a sample docx to http://webapp.docx4java.org/OnlineDemo/PartsList.html which can generate the code for you. Or use https://www.docx4java.org/forums/announces/docx4j-helper-addin-new-installer-available-t2946.html
Make sure the IDs are unique in your part.
Finally, to actually use your numbering scheme in your docx, you'll need to set w:numPr on your paragraph:
<w:p>
<w:pPr>
<w:numPr>
<w:ilvl w:val="0"/>
<w:numId w:val="1"/>
</w:numPr>
</w:pPr>
where the w:vals reference your list definition (by numId) and list level (ilvl).
Related
I was wondering if folks have found a reliable way to inject text into an existing string. Some context, I'm writing data to a string indicator formatted like a table, and I wanted to inject values into so they maintain a specific format, spacing-wise. Writing to a table would definitely be easier, however I am porting a legacy program and wanted to provide familiarity to the end user.
Essentially, I want to do the equivalent of typing into a .txt file with the INSERT function enabled, where it just overwrites the content already in the string. Example below (dashes added to show spacing) of how it is currently looking when I inject the values with hard coded spacing:
Time---value---avg. value---result
60------10---------20---------PASS
120------11---------20---------PASS
180------9---------15---------FAIL
I'd prefer it to look more lined up, like below:
Time---value---avg. value---result
60------10---------20---------PASS
120-----11---------20---------PASS
180-----9--------- 15---------FAIL
Writing my application using LabVIEW 2019
Edit: Header will obviously not change, only each subsequent line where the values can result in entries not looking lined up
What about "Replace Substring" function (https://zone.ni.com/reference/en-XX/help/371361R-01/glang/replace_substring/)? Doesn't it meet your requirements?
The diagram below outputs 01234999990123PASS890123456789. The values of the integer and the word PASS are added replacing characters in the existing string, exactly like overstrike would do.
I am a relatively new user of Tabulator so please forgive me if I am asking anything that, perhaps, should be obvious.
I have a Tabulator report that I am able to print and create as a PDF, but the report's formatting (as shown on the screen) is not used in either output.
For printing I have used printAsHtml and printStyled=true, but this doesn't produce a printout that matches what is on the screen. I have formatted number fields (with comma separators) and these are showing correctly, but the number columns should be right-aligned but all of the columns appear as left-aligned.
I am also using Tree View where the tree rows are coloured differently to the main table, but when I print the report with a tree open it colours the whole table with the tree colours and not just the tree.
For the PDF none of the Tabulator formatting is being used. I've looked for anything similar to the printStyled option, but I can't see anything. I've also looked at the autoTable option, but I am struggling to find what to use.
I want to format the print and PDF outputs so that they look as close to the screen representation as possible.
Is there anywhere I could look that would provide examples of how to achieve the above? The Tabulator documentation is very good, but the provided examples don't appear to explain what I am trying to do.
Perhaps there are there CSS classes that I am missing or even mis-using? I have tried including .tabulator-print-table in my CSS, but I am probably not using it correctly. I also couldn't find anything equivalent for producing PDFs. Some examples would help immensely.
Thank you in advance for any advice or assistance.
Formatting is deliberately not included in these, below i will outline why:
Downloaders
Downloaded files do not contain formatted data, only the raw data, this is because a lot of the formatters create visual elements (progress bar, star formatter etc) that cannot be replicated sensibly in downloaded files.
If you want to change the format of data in the download you will need to use an accessor, the accessorDownload option is the one you want to use in this case. The accessors transform the data as it is leaving the table.
For instance we could create an accessor that prepended "Mr " to the front of every name in a column:
var mrAccessor= function(value, data, type, params, column, row){
return "Mr " + value;
}
Assign it to a columns definition:
{title:"Name", field:"name", accessorDownload:mrAccessor}
Printing
Printing also does not include the formatters, this is because when you print a Tabulator table, the whole table is actually rebuilt as a standard HTML table, which allows the printer to work out how to layout everything across multiple pages with column headers etc. The downside of this is that it is only loosely styled like a Tabulator and so formatted contents generated inside Tabulator cells will likely break when added to a normal td element.
For this reason there is also a accessorPrint option that works in the same way as the download accessor but for printing.
If you want to use the same accessor for both occasions, you can assign the function once to the accessor option and it will be applied in both instances.
Checkout the Accessor Documentation for full details.
I believe I may have found a bug in Google Sheets formatting or else my preferred option is I'm doing something wrong! * Brief rant - I find GridRange a PITBS!! Rant over.
I'm simply trying to format a cell and make the text bold. I send the following JSON request:
{"requests":[{"repeatCell":{"range":{"startRowIndex":1,"endRowIndex":"2","startColumnIndex":1,"endColumnIndex"
:2,"sheetId":0},"cell":{"effectiveFormat":{"textFormat":{"bold":"true"}}},"fields":"*"}},{"repeatCell"
:{"range":{"startRowIndex":7,"endRowIndex":"8","startColumnIndex":1,"endColumnIndex":7,"sheetId":0},"cell"
:{"effectiveFormat":{"textFormat":{"bold":"true"}}},"fields":"*"}}]}
And the values in the cells disappear?? I know the values are there because if I omit this styling code then nothing is altered and the values remain. What am I doing wrong? (For ref the fields here are B2:B2 and B8:G8). Any help gratefully appreciated.
I am sending this through the JS API but believe I have seen the same through the PHP too.
You are setting the fields parameter to *, which means, "I want to set every field.". Since you don't supply a value but said you want to set each field, the values are being reset to their defaults (which is empty).
If you only want to apply formatting, you need to set the fields parameter to just the format fields, e.g userEnteredFormat. See the documentation on field masks for more info.
Note also that you're attempting to set effectiveFormat, but per the reference docs that field is read-only.
I'm using Doxygen to generate documentation for my code. I need to make a PDF version of this and using Doxygen's LaTeX output appears to be the way to do it.
However I've run into a number of annoying problems, and not knowing anything about LaTeX previously haven't really got much of an idea on how to approach them, and the countless references for LaTeX related things are not much help...
I worked out how to create a custom style thing in a sty file and how to get Doxygen to use it. After a lot of searching I found out how to set the page margins etc. through this, and I'm guessing the perhaps this is the file I want for doing the other things I want, but I cant seem to find any commands for doign what I want :(
The table of contents at the start of the document contains a lot of items Id rather it didn't as it makes the contents very long. Is there some way to limit this contents to just say the first two levels, rather than having entries for every single individual function, variable, etc.? Id quite like to keep all the bookmarks however. I did try the "COMPACT_LATEX" option but as well as removing items on the contents pages, it removed the bookmarks and the member lists at the start of each section, which I do really want to keep.
Is there a way to change the order of things, like putting the full class description at the start of the section, rather than after all the members and attributes?
Wow, that's kind of evil of Doxygen.
Okay, to get around the tocdepth counter problem, add the following line to your .sty file:
\AtBeginDocument{\setcounter{tocdepth}{2}}% or whatever level you want
You can set the PDF bookmarks depth to a separate value:
% requires you \usepackage{hyperref} first
\hypersetup{
bookmarksdepth = section, % of whatever level you want
}
Also note that if you have a list of figures/tables, the tocdepth must be at least 2 for them to show up.
I don't see any way of rearranging those items within the LaTeX files---Doxygen just barfs them out there, so we can't do much. You'll have to poke around the Doxygen documentation to see if there's any way to specify the order I guess. (Here's hoping!)
You're so close.
Googling on "latex contents level" brought me to LaTeX - customizing the depth of the table of contents for different parts of the thesis which suggests
\setcounter{tocdepth}{n}
where n starts at zero for only the highest level division. This is presumable defined in all the default styles, but is worth a try in doxygen.
You could write a Perl/Awk script to simply delete the unwanted lines from the table of contents. For the file burble.tex, Latex will generate the file burble.toc, which will contain lines such as:
\contentsline {subsection}{Class F rewrites}{38}
\contentsline {subsection}{Class M rewrites}{39}
\contentsline {section}{\numberline {7}Definition and properties of the translation}{44}
\contentsline {paragraph}{Well-formedness}{54}
Simple regexes will identify which levels each line belongs to, and you can filter the file based on that. Once you have the table of contents the way you want it, insert \nofiles in the appropriate place (the style sheet?), which means that Latex will read the auxiliary files but not overwrite them.
In LaTeX, how can I define a string variable whose content is used instead of the variable in the compiled PDF?
Let's say I'm writing a tech doc on a software and I want to define the package name in the preamble or somewhere so that if its name changes, I don't have to replace it in a lot of places but only in one place.
add the following to you preamble:
\newcommand{\newCommandName}{text to insert}
Then you can just use \newCommandName{} in the text
For more info on \newcommand, see e.g. wikibooks
Example:
\documentclass{article}
\newcommand\x{30}
\begin{document}
\x
\end{document}
Output:
30
Use \def command:
\def \variable {Something that's better to use as a variable}
Be aware that \def overrides preexisting macros without any warnings and therefore can cause various subtle errors. To overcome this either use namespaced variables like my_var or fall back to \newcommand, \renewcommand commands instead.
For variables describing distances, you would use \newlength (and manipulate the values with \setlength, \addlength, \settoheight, \settolength and \settodepth).
Similarly you have access to \newcounter for things like section and figure numbers which should increment throughout the document. I've used this one in the past to provide code samples that were numbered separatly of other figures...
Also of note is \makebox which allows you to store a bit of laid-out document for later re-use (and for use with \settolength...).
If you want to use \newcommand, you can also include \usepackage{xspace} and define command by \newcommand{\newCommandName}{text to insert\xspace}.
This can allow you to just use \newCommandName rather than \newCommandName{}.
For more detail, http://www.math.tamu.edu/~harold.boas/courses/math696/why-macros.html
I think you probably want to use a token list for this purpose:
to set up the token list
\newtoks\packagename
to assign the name:
\packagename={New Name for the package}
to put the name into your output:
\the\packagename.