I am using selenium to automate. I have also integrated Asprise OCR in my automation to scan texts and this is my code
{
Ocr.setUp();
Ocr ocr = new Ocr();
ocr.startEngine("eng", Ocr.SPEED_FASTEST); // English
String path = "C:\\Users\\Vishalpatel\\Desktop\\screen\\captcha.png";
String text = ocr.recognize(new File[] { new File(path) },Ocr.RECOGNIZE_TYPE_TEXT, Ocr.OUTPUT_FORMAT_PLAINTEXT);
System.out.println(text+" my code");
text = text.replace("x", " ");
text = text.replace(" ", "");
CharSequence str1= text.subSequence(0, 1);
CharSequence str2= text.subSequence(2, text.length()-1);
int x = Integer.parseInt((String) str1) + Integer.parseInt((String) str2);
ocr.stopEngine(); // Stop OCR engine
return x+"";
}
My scipt get stuck on this dialog and I have to handle it manually. Any idea to handle such issue? Thank you in advance
Related
I have been trying to convert XDP to PDF using Adobe Live Cycle. Most of my forms turn up good. But while converting some of them, I fine ??? replaced in place of blank spaces at certain places. Any suggestions to how can I rectify that?
Below is the code snippet that I am using:
public byte[] generatePDF(TextDocument xdpDocument) {
try {
Assert.notNull(xdpDocument, "XDP Document must be passed.");
Assert.hasLength(xdpDocument.getContent(), "XDPDocument content cannot be null");
// Create a ServiceClientFactory object
ServiceClientFactory myFactory = ServiceClientFactory.createInstance(createConnectionProperties());
// Create an OutputClient object
FormsServiceClient formsClient = new FormsServiceClient(myFactory);
formsClient.resetCache();
String text = xdpDocument.getContent();
String charSet = xdpDocument.getCharsetName();
if (charSet == null || charSet.trim().length() == 0) {
charSet = StandardCharsets.UTF_8.name();
}
byte[] bytes = text.getBytes();
ByteArrayInputStream byteArrayInputStream = new ByteArrayInputStream(bytes);
Document inTemplate = new Document(byteArrayInputStream);
// Set PDF run-time options
// Set rendering run-time options
RenderOptionsSpec renderOptionsSpec = new RenderOptionsSpec();
renderOptionsSpec.setLinearizedPDF(true);
renderOptionsSpec.setAcrobatVersion(AcrobatVersion.Acrobat_9);
PDFFormRenderSpec pdfFormRenderSpec = new PDFFormRenderSpec();
pdfFormRenderSpec.setGenerateServerAppearance(true);
pdfFormRenderSpec.setCharset("UTF8");
FormsResult formOut = formsClient.renderPDFForm2(inTemplate, null, pdfFormRenderSpec, null, null);
Document xfaPdfOutput = formOut.getOutputContent();
//If the input file is already static PDF, then below method will throw an exception - handle it
OutputClient outClient = new OutputClient(myFactory);
outClient.resetCache();
Document staticPdfOutput = outClient.transformPDF(xfaPdfOutput, TransformationFormat.PDF, null, null, null);
byte[] data = StreamIO.toBytes(staticPdfOutput.getInputStream());
return data;
} catch(IllegalArgumentException ex) {
logger.error("Input validation failed for generatePDF request " + ex.getMessage());
throw new EformsException(ErrorExceptionCode.INPUT_REQUIRED + " - " + ex.getMessage(), ErrorExceptionCode.INPUT_REQUIRED);
} catch (Exception e) {
logger.error("Exception occurred in Adobe Services while generating PDF from xdpDocument..", e);
throw new EformsException(ErrorExceptionCode.PDF_XDP_CONVERSION_EXCEPTION, e);
}
}
I suggest trying 2 things:
Check the font. Switch to something very common like Arial / Times New Roman and see if the characters are still lost
Check the character encoding. It might not be a simple question mark character you are using and if so the character encoding will be important. The easiest way is to make sure your question mark is ascii char 63 (decimal).
I hope that helps.
Good Evening (UK)
I'm trying to filter down a 1500+ page PDF file to only the pages which include a certain text string (typically one or two words). My laptop is locked down with respect to installing more software BUT I have used action(script)s quite a bit
I get the error below when I try to install this action into Abobe Acrobat X Pro (Win 7):
screen dump of error
called "Extract Commented Pages"... supposed to be OK for X and XI this looks like what I want.....
I wondered if there was something simple causing the problem but the actionscript file is rather... busy to say the least.
I used to have an action that I think was based on a legal redaction script but it is filed somewhere!
If you have already got an action that does this or a version of the above that doesn't give the error I get (unable to import the Action.... The file is either invalid or corrupt) I will forever by indebted to your gratitude
Many thanks, have a good weekend!
I recently came across a script found at the following link: http://forums.adobe.com/thread/1077118
I'm having some issues getting the script to run in Acrobat, despite everything looking alright in the script itself. I'll update if I find any errors.
Here is a copy of the script:
// Set the word to search for here
var sWord = "forms";
// Source document = current document
var sd = this;
var nWords, currWord, fp, fpa = [], nd;
var fn = sd.documentFileName.replace(/\.pdf$/i, "");
// Loop through the pages
for (var i = 0; i < sd.numPages; i += 1) {
// Get the number of words on the page
nWords = sd.getPageNumWords(i);
// Loop through the words on the page
for (var j = 0; j < nWords; j += 1) {
// Get the current word
currWord = sd.getPageNthWord(i, j);
if (currWord === sWord) {
// Extract the current page to a new file
fp = fn + "_" + i + ".pdf";
fpa.push(fp);
sd.extractPages({nStart: i, nEnd: i, cPath: fp});
// Stop searching this page
break;
}
}
}
// Combine the individual pages into one PDF
if (fpa.length) {
// Open the document that's the first extracted page
nd = app.openDoc({cPath: fpa[0], oDoc: sd});
// Append any other pages that were extracted
if (fpa.length > 1) {
for (var i = 1; i < fpa.length; i += 1) {
nd.insertPages({nPage: i - 1, cPath: fpa[i], nStart: 0, nEnd: 0});
}
}
// Save to a new document and close this one
nd.saveAs({cPath: fn + "_searched.pdf"});
nd.closeDoc({bNoSave: true});
}
We are trying to build a jmeter testcase which does the following:
login to a system
obtain some information and check whether correct.
Where we are facing issues is because there is a captcha while logging into the system. What we had planned to do was to download the captcha link and display, and wait for user to type in the value. Once done, everything goes as usual.
We couldnt find any plugin that can do the same? Other than writing our own plugin, is there any option here?
I was able to solve it myself. The solution is as follows:
Create a JSR223 PostProcessor (using Groovy)
more practical CAPTCHA example with JSESSIONID handling and proxy setting
using image.flush() to prevent stale CAPTCHA image in dialog box
JSR223 Parameters for proxy connection setting:
Parameters: proxy 10.0.0.1 8080
In it, the following code displays the captcha and waits for user input
import java.awt.Image;
import java.awt.Toolkit;
import javax.swing.Icon;
import javax.swing.JOptionPane;
import org.apache.jmeter.threads.JMeterContextService;
import org.apache.jmeter.threads.JMeterContext;
import org.apache.jmeter.protocol.http.control.CookieManager;
import org.apache.jmeter.protocol.http.control.Cookie;
URL urlTemp ;
urlTemp = new URL( "https://your.domainname.com/endpoint/CAPTCHACode");
HttpURLConnection myGetContent = null;
if(args[0]=="proxy" ){
Proxy proxy = new Proxy(Proxy.Type.HTTP, new InetSocketAddress(args[1], Integer.parseInt(args[2])));
myGetContent = (HttpURLConnection) urlTemp.openConnection(proxy);
}else{
myGetContent = (HttpURLConnection) urlTemp.openConnection();
}
// false for http GET
myGetContent.setDoOutput(false);
myGetContent.connect();
int status = myGetContent.getResponseCode();
log.info("HTTP Status Code: "+Integer.toString(status));
if (status == HttpURLConnection.HTTP_OK) {
//We have 2 Set-Cookie headers in response message but 1 Set-Cookie entry in Map
String[] parts2;
for (Map.Entry<String, List<String>> entries : myGetContent.getHeaderFields().entrySet()) {
if( entries.getKey() == "Set-Cookie" ){
for (String value : entries.getValue()) {
if ( value.contains("JSESSIONID") == true ){
String[] parts = value.split(";",2);
log.info("Response header: "+ entries.getKey() + " - " + parts[0] );
JMeterContext context = JMeterContextService.getContext();
CookieManager manager = context.getCurrentSampler().getCookieManager();
parts2 = parts[0].split("=",2)
Cookie cookie = new Cookie("JSESSIONID",parts2[1],"your.domainname.com","/endpoint",true,0, true, true, 0);
manager.add(cookie);
log.info( cookie.toString() );
log.info("CookieCount "+ manager.getCookieCount().toString() );
}
}
}
}//end of outer for loop
if ( parts2.find() == null ) {
throw new Exception("The Response Header not contain Set-Cookie:JSESSIONID= .");
}
}else{
throw new Exception("The Http Status Code was ${status} , not expected 200 OK.");
}
BufferedInputStream bins = new BufferedInputStream(myGetContent.getInputStream());
String destFile = "number.png";
File f = new File(destFile);
if(f.exists() ) {
boolean fileDeleted = f.delete();
log.info("delete file ... ");
log.info(String.valueOf(fileDeleted));
}
FileOutputStream fout =new FileOutputStream(destFile);
int m = 0;
byte[] bytesIn = new byte[1024];
while ((m = bins.read(bytesIn)) != -1) {
fout.write(bytesIn, 0, m);
}
fout.close();
bins.close();
log.info("File " +destFile +" downloaded successfully");
Image image = Toolkit.getDefaultToolkit().getImage(destFile);
image.flush(); // release the prior cache of Captcha image
Icon icon = new javax.swing.ImageIcon(image);
JOptionPane pane = new JOptionPane("Enter Captcha", 0, 0, null);
String captcha = pane.showInputDialog(null, "Captcha", "Captcha", 0, icon, null, null);
captcha = captcha.trim();
captcha = captcha.replaceAll("\r\n", "");
log.info(captcha);
vars.put("captcha", captcha);
myGetContent.disconnect();
By vars.put method we can use the captcha variable in any way we want. Thank you everyone who tried to help.
Since CAPTHA used to detect non-humans, JMeter will always fail it.
You have to make a workaround in your software: either disable captcha requesting or print somewhere on page correct captcha. Of course, only for JMeter tests.
Dirty workaround? Print the captcha value in alt image for the tests. And then you can retrieve the value and go on.
Is there any way to force Hudson to give me more detailed test results - e.g. I'm comparing two strings and I want to know where they differ.
Is there any way to do this?
Thank you for help.
You should not hope Hudson give the detail information, it just shows the testing messages generated by junit.
You could show the expected string and actual string when failing asserting equals between those two strings.
For example,
protected void compareFiles(File newFile, String referenceLocation, boolean lineNumberMatters) {
BufferedReader reader = null;
BufferedReader referenceReader = null;
List<String> expectedLines = new ArrayList<String>();
try {
referenceReader = new BufferedReader(new InputStreamReader(FileLocator.openStream(Activator.getDefault().getBundle(), new Path("data/regression/" + referenceLocation), false))); //$NON-NLS-1$
expectedLines = getLinesFromReader(referenceReader);
} catch (Exception e) {
assertFalse("Exception occured during reading reference data: " + e, true); //$NON-NLS-1$
}
List<String>foundLines = new ArrayList<String>();
try {
reader = new BufferedReader(new FileReader(newFile));
foundLines = getLinesFromReader(reader);
} catch (Exception e) {
assertFalse("Exception occured during reading file: " + e, true); //$NON-NLS-1$
}
boolean throwException = expectedLines.size() != foundLines.size();
if (throwException) {
StringBuffer buffer = new StringBuffer("\n" + newFile.toString()); //$NON-NLS-1$
for (String line: foundLines)
buffer.append(line + "\n"); //$NON-NLS-1$
assertEquals("The number of lines in the reference(" + referenceLocation + ") and new output(" + newFile.getAbsolutePath()+ ") did not match!" + buffer, expectedLines.size(), foundLines.size()); //$NON-NLS-1$ //$NON-NLS-2$ //$NON-NLS-3$
}
if (!lineNumberMatters) {
Collections.sort(expectedLines);
Collections.sort(foundLines);
}
/** Either the line matches character by character or it matches regex-wise, in that order */
for (int i=0;i<expectedLines.size(); i++)
assertTrue("Found errors in file (" + newFile + ")! " + foundLines.get(i) + " vs. " + expectedLines.get(i), foundLines.get(i).equals(expectedLines.get(i)) || foundLines.get(i).matches(expectedLines.get(i))); //$NON-NLS-1$ //$NON-NLS-2$ //$NON-NLS-3$
}
Hudson supports JUnit directly. On your job configuration page, near the end, should be an option to "Publish JUnit test results report".
I'm not too familiar with JUnit itself, but I guess it produces (or has the ability to produce) and put results in an xml file. You just need to put the path of to the xml file (relative to the workspace) in the text box.
Once you do that, and create a build, you'll have a detailed report on your project page. You should then be able to click your way through the results for each test.
I am trying to automate the process of scanning/cropping photos in Photoshop. I need to scan 3 photos at a time, then use Photoshop's Crop and Straighten Photos command, which creates 3 separate images. After that I'd like to save each of the newly created images as a PNG.
I looked at the JSX scripts and they seem to a lot of promise. Is what I described possible to automate in Photoshop using JavaScript or VBScript or whatever?
I just found this script just did the work for me! It automatically crop & straighten the photo and save each result to directory you specified.
http://www.tranberry.com/photoshop/photoshop_scripting/PS4GeeksOrlando/IntroScripts/cropAndStraightenBatch.jsx
Save it to local then run it in the PS=>File=>Command=>Browse
P.S I found in the comment it said the script can be executed directly by double clicking from Mac Finder or Windows Explorer.
Backup gist for the script here
I actually got the answer on the Photoshop forums over at adobe. It turns out that Photoshop CS4 is totally scriptable via JavaScript, VBScript and comes with a really kick-ass Developer IDE, that has everything you'd expect (debugger, watch window, color coding and more). I was totally impressed.
Following is an extract for reference:
you can run the following script that will create a new folder off the existing one and batch split all the files naming them existingFileName#001.png and put them in the new folder (edited)
#target Photoshop
app.bringToFront;
var inFolder = Folder.selectDialog("Please select folder to process");
if(inFolder != null){
var fileList = inFolder.getFiles(/\.(jpg|tif|psd|)$/i);
var outfolder = new Folder(decodeURI(inFolder) + "/Edited");
if (outfolder.exists == false) outfolder.create();
for(var a = 0 ;a < fileList.length; a++){
if(fileList[a] instanceof File){
var doc= open(fileList[a]);
doc.flatten();
var docname = fileList[a].name.slice(0,-4);
CropStraighten();
doc.close(SaveOptions.DONOTSAVECHANGES);
var count = 1;
while(app.documents.length){
var saveFile = new File(decodeURI(outfolder) + "/" + docname +"#"+ zeroPad(count,3) + ".png");
SavePNG(saveFile);
activeDocument.close(SaveOptions.DONOTSAVECHANGES) ;
count++;
}
}
}
};
function CropStraighten() {
function cTID(s) { return app.charIDToTypeID(s); };
function sTID(s) { return app.stringIDToTypeID(s); };
executeAction( sTID('CropPhotosAuto0001'), undefined, DialogModes.NO );
};
function SavePNG(saveFile){
pngSaveOptions = new PNGSaveOptions();
pngSaveOptions.embedColorProfile = true;
pngSaveOptions.formatOptions = FormatOptions.STANDARDBASELINE;
pngSaveOptions.matte = MatteType.NONE;
pngSaveOptions.quality = 1;
pngSaveOptions.PNG8 = false; //24 bit PNG
pngSaveOptions.transparency = true;
activeDocument.saveAs(saveFile, pngSaveOptions, true, Extension.LOWERCASE);
}
function zeroPad(n, s) {
n = n.toString();
while (n.length < s) n = '0' + n;
return n;
};
Visit here for complete post.
Have you tried using Photoshop Actions? I don't now about the scanning part, but the rest can all be done by actions quite easily.