$sourceVM = get-vm -name LinuxBox
$referenceSnapshot = Get-Snapshot -VM "LinuxBox" -Name "snapshot1"
$myDatastore = Get-Datastore -Name datastore1
##$vmhost = Get-VMHost
##-ResourcePool $vmhost
New-VM -Name LinuxTest -VM $sourceVM -LinkedClone -ReferenceSnapshot $referenceSnapshot -Datastore $myDatastore
Above is the code I am trying to use, below I have the error I am getting. I am connected to the ESX server already and all variables contain values. Any insight would be appreciated. ESXi version 6.0. 12.5.0. VMware.PowerCLI
New-VM : 3/31/2022 9:50:14 AM New-VM
At line:1 char:1
+ New-VM -Name LinuxTest -VM $sourceVM -LinkedClone -ReferenceSnapshot ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [New-VM], InvalidProperty
+ FullyQualifiedErrorId : ViCore_Util10_EncryptionServiceHelper_UpdateViewD
ata_ViErrror,VMware.VimAutomation.ViCore.Cmdlets.Commands.NewVM
Related
Enable-WindowsOptionalFeature : Feature name Microsoft-Windows-Subsytem-Linux is unknown.
At line:1 char:1
+ Enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Windows- ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Enable-WindowsOptionalFeature], COMException
+ FullyQualifiedErrorId : Microsoft.Dism.Commands.EnableWindowsOptionalFeatureCommand
I was trying to install wsl in my pc but i get this error
We are trying to automate the creation of log alerts using the Az.Monitor library and getting the following error
New-AzActivityLogAlert : The module 'Az.Monitor.internal' could not be loaded. For more information, run 'Import-Module Az.Monitor.internal'.
At E:\Code\Code\ManageLogAnalyticsAlerts.ps1:28 char:5
New-AzActivityLogAlert -Name 'sometest' -ResourceGroupName $logWo ...
CategoryInfo : ObjectNotFound: (Az.Monitor.inte...ctivityLogAlert:String) [New-AzActivityLogAlert], CommandNotFoundException
FullyQualifiedErrorId : CouldNotAutoLoadModule,New-AzActivityLogAlert
The code that we are using is
$receiverName = $actionGroupName
$actionGroupReceiver = New-AzActionGroupReceiver -Name $receiverName -EmailReceiver -EmailAddress 'emailstub#email.com' -UseCommonAlertSchema -WarningAction silentlyContinue
$actionGroup = Set-AzActionGroup -Name $actionGroupName -ResourceGroup $logWorkspace.ResourceGroupName -ShortName $actionGroupName -Receiver $actionGroupReceiver -WarningAction silentlyContinue
Write-Host '----Action Group: ' $actionGroupName ', Action Group Id: ' $actionGroup.Id ', created with Action Group Receiver: ' $receiverName ' in the log workspace: ' $logWorkspace.Name
$activityGroupObject = New-AzActivityLogAlertActionGroupObject -Id $actionGroup.Id -WebhookProperty #{"sampleWebhookProperty"="SamplePropertyValue"}
$scope = "subscriptions/"+(Get-AzContext).Subscription.ID
$condition1=New-AzActivityLogAlertAlertRuleAnyOfOrLeafConditionObject -Equal Ingestion -Field category
# $condition2=New-AzActivityLogAlertAlertRuleAnyOfOrLeafConditionObject -Equal Error -Field level
$any1=New-AzActivityLogAlertAlertRuleLeafConditionObject -Field properties.Operation -Equal 'Data collection"'
$any2=New-AzActivityLogAlertAlertRuleLeafConditionObject -Field properties.incidentType -Equal Incident
$condition3=New-AzActivityLogAlertAlertRuleAnyOfOrLeafConditionObject -AnyOf $any1,$any2
New-AzActivityLogAlert -Name 'sometest' -ResourceGroupName $logWorkspace.ResourceGroupName -Action $activityGroupObject -Condition #($condition1,$condition3) -Location global -Scope $scope
The line which is causing the error is
New-AzActivityLogAlert -Name 'sometest' -ResourceGroupName $logWorkspace.ResourceGroupName -Action $activityGroupObject -Condition #($condition1,$condition3) -Location global -Scope $scope
The Powershell version we have is
$PSVersionTable
Name Value
---- -----
PSVersion 5.1.18362.628
PSEdition Desktop
PSCompatibleVersions {1.0, 2.0, 3.0, 4.0...}
BuildVersion 10.0.18362.628
CLRVersion 4.0.30319.42000
WSManStackVersion 3.0
PSRemotingProtocolVersion 2.3
SerializationVersion 1.1.0.1
The Az Powerhshell version that I have is 9.0.1.
Apparently, this was a bug, and the Azure team will be deploying the fix to production. Here is the link https://github.com/Azure/azure-powershell/issues/19927 which gives the timeline.
This is using the latest Powershell and Azure modules. The user was deleted. My question is why can't I recreate them?
PS C:\Users\Administrator> Get-MsolUser -UserPrincipalName
"bella.daniel#demo.co.uk"
Get-MsolUser : User Not Found. User: bella.daniel#demo.co.uk.
At line:1 char:1
+ Get-MsolUser -UserPrincipalName "bella.daniel#demo.co.uk"
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OperationStopped: (:) [Get-MsolUser], MicrosoftOnlineException
+ FullyQualifiedErrorId : Microsoft.Online.Administration.Automation.UserNotFoundException,Microsoft.Online.Admini
stration.Automation.GetUser
PS C:\Users\Administrator> new-msoluser -DisplayName Daniel -UserPrincipalName bella.daniel#demo.co.uk -UsageLocati
on NO -BlockCredential $false -ImmutableId DANIELB620
new-msoluser : Unable to add this user because a user with the user principal name already exists.
At line:1 char:1
+ new-msoluser -DisplayName Daniel -UserPrincipalName bella.daniel#demo ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OperationStopped: (:) [New-MsolUser], MicrosoftOnlineException
+ FullyQualifiedErrorId : Microsoft.Online.Administration.Automation.UniquenessValidationException,Microsoft.Onlin
e.Administration.Automation.NewUser
Ah....so AAD doesn't fully delete users.
By running
Get-MsolUser –ReturnDeletedUsers -All | Remove-MsolUser –RemoveFromRecycleBin –Force
I was able to clear them all out and "re-use" the UPN
I am trying to run simple powershell script prom a job(sql server agent).
script:
[string]$SrcFolder = "G:\MSSQL\Test";
[string]$TrgFolder = "\\xx.xx.xx.xxx\d$\sql\logshipping" ;
if (-not(Get-Module -Name SQLPS))
{
if (Get-Module -ListAvailable -Name SQLPS) {
Push-Location
Import-Module -Name SQLPS -DisableNameChecking
Pop-Location
};
};
if ($SrcFolder -eq $null -or $TrgFolder -eq $null )
{
Write-Host "The source Folder = $SrcFolder ,OR target folder = $TrgFolder is not valid/Null";
};
$prafix = "[A-Za-z]+_[0-9]+_[0-9].trn" ;
Set-Location -Path C:\ ;
# Copy to Destination
foreach ($file in gci -Path $SrcFolder | Where-Object{ $_.Mode -eq '-a---' -and $_.Extension -eq '.trn' -and $_.Name -match $prafix})
{
write-host "Starting Copy File: $($file.FullName) ." ;
Copy-Item -Path $file.FullName -Destination $TrgFolder -Force -ErrorAction Stop ;
if (Test-Path -LiteralPath "$TrgFolder\$($file.Name)")
{
write-host "End Copy File: $($file.FullName) ." ;
Move-Item -Path $file.FullName -Destination "$SrcFolder\Moved" -Force ;
}
else
{
Write-Host "The Copy File: $TrgFolder\$($file.BaseName) . Failed "
};
}
The script doing: Copy .bak files to remote server. then check if the bak file exists in the remote server, and if it's exists his move the bak file to a local folder .
The job is failing message:
Date 9/1/2016 6:29:31 PM Log Job History (LS_Manual-Copy)
Step ID 3 Server SQL2012ENT-IR-3 Job Name LS_Manual-Copy Step
Name Delete Old Logs Duration 00:00:00 Sql Severity 0 Sql Message
ID 0 Operator Emailed Operator Net sent Operator Paged Retries
Attempted 0
Message Unable to start execution of step 3 (reason: line(23): Syntax
error). The step failed.
the sql server agent is a member in the Administrator group .
please help .
10X
We try to get our DB updated as part of the Visual Studio Online build as dedicated build step, but the PowerShell script that we locally using fails to work on the hosted build controller with following error.
2015-07-28T20:35:26.8546681Z ##[error]import-module : The specified module 'sqlps' was not loaded because no valid module file was found in any module
2015-07-28T20:35:26.8546681Z ##[error]directory.
Is there any way to use "Invoke-SqlCmd" in VSO hosted build controller?
Got it working with those lines!
Add-PSSnapin SqlServerCmdletSnapin100 -ErrorAction SilentlyContinue
Add-PSSnapin SqlServerProviderSnapin100 -ErrorAction SilentlyContinue
Here how I do it:
$moduleName = "SqlServer"
if (Get-Module $moduleName -ListAvailable) {
Write-Host "Module '$moduleName' is available"
} else {
Write-Host "Module '$moduleName' does not exist"
try {
Install-Module -Name $moduleName -Force -AllowClobber
Write-Host "Module '$moduleName' successfully installed"
} catch {
Throw "Installation of module '$moduleName' failed: $($_.Exception)"
}
}