So i reinstalled Nextcloud on my Pi, because i got now an external harddrive to connect. So i used:
sudo ln -s media/pi/Elementals/Nextcloud/data /var/www/nextcloud/data
and i changed the the owner inside var /www/nextcloud to www-data for the data folder there.
Still i cant install it. I tried to change the owner of /media/pi/Elementals/Nextcloud/data. But cant change it.
im using:
chown -R www-data:www-data data/
Even thos when i use:
sudo -u www-data bash
and then create a folder its owned by pi.
What i did wrong ?
Got it:
used fstab used there ntfs-3g
I think you forgot to add sudo the command should be
sudo chown www-data /path/to/data/
My site is running on a EC2 Amazon server under Ubuntu/Apache2.
My site was running fine until I changed the permissions for user 'ubuntu' by doing this command:
chown -R ubuntu /var/www/html
Now my site is spitting out warning messages and errors :(
www.kaysboutique.co.uk
I did this because I wanted to be able to write files via FileZilla after following this answer:
Amazon AWS Filezilla transfer permission denied
Fixed by running these:
sudo chown www-data -R /var/www/html
If not fixed, run sudo chown -R www-data /var/www/html
First to fix the pb try to restore the initial user and group for html directory by using this command :
sudo chown -R www-data:www-data /var/www/html
And if you need to add new user to www-data group use this command :
sudo useradd -g www-data [username]
sudo passwd [username]
Setting up a development environment with Ubuntu 14.04 running in VirtualBox, following this guide: http://klau.si/dev
After installing phpmyadmin, it seems I should be able to access it at http://localhost/phpmyadmin but apache returns a Not Found error. Did this guide leave out a configuration step somewhere? I have already tried restarting the apache service.
There is no phpmyadmin.conf file in apache2/sites-enabled or apache2/sites-available, is this required?
If so, where can I find these files?
using 127.0.0.1 instead of localhost returns the same error. The default apache page at http://localhost works just fine.
the console in the browser shows nothing of value, simply Not Found.
I have also tried rerunning the install script with dpkg-reconfigure -plow phpmyadmin
This issue was resolved thanks to this guide: https://help.ubuntu.com/community/ApacheMySQLPHP#Troubleshooting_Phpmyadmin_.26_mysql-workbench by adding
Include /etc/phpmyadmin/apache.conf
...to the /etc/apache2/apache2.conf file and restarting the service.
Try this
sudo ln -s /etc/phpmyadmin/apache.conf /etc/apache2/conf-available/phpmyadmin.conf
sudo a2enconf phpmyadmin.conf
sudo systemctl restart apache2
sudo dpkg-reconfigure -plow phpmyadmin
Select No when asked to reconfigure the database. Then when asked to choose apache2, make sure to hit space while [ ] apache2 is highlighted. An asterisk should appear between the brackets. Then hit Enter. Phpmyadmin should reconfigure and now http://localhost/phpmyadmin should work. for further detail https://www.howtoforge.com/installing-apache2-with-php5-and-mysql-support-on-ubuntu-13.04-lamp
The easiest way to do in ubuntu (I tested in ubuntu-20.04):
Step 1. Open the file:
sudo nano /etc/apache2/apache2.conf
Step 2: Add the following line at the end of file:
Include /etc/phpmyadmin/apache.conf
Step 3: Restart apache2:
sudo systemctl restart apache2.service
Create a link in /var/www like this:
sudo ln -s /usr/share/phpmyadmin /var/www/
Note: since 14.04 you may want to use /var/www/html/ instead of /var/www/
If that's not working for you, you need to include PHPMyAdmin inside apache configuration.
Open apache.conf using your favorite editor, mine is nano :)
sudo nano /etc/apache2/apache2.conf
Then add the following line:
Include /etc/phpmyadmin/apache.conf
For Ubuntu 15.04 and 16.04
sudo ln -s /etc/phpmyadmin/apache.conf /etc/apache2/conf-available/phpmyadmin.conf
sudo a2enconf phpmyadmin.conf
sudo service apache2 reload
Finally I got the solution
sudo ln -s /etc/phpmyadmin/apache.conf /etc/apache2/conf-available/phpmyadmin.conf
sudo a2enconf phpmyadmin
sudo service apache2 reload
More about
https://askubuntu.com/questions/55280/phpmyadmin-is-not-working-after-i-installed-it
Create a link in /var/www/html like this to fix the error:
sudo ln -s /usr/share/phpmyadmin /var/www/html
For anyone still running into issues with this- check that you're actually using apache! I knocked my head against this for 20 minutes or so before I remembered...I use NginX on this server...=). #john-smith, this one's for you buddy.
To get it working on nginx, all you should have to do is create a sim link and restart php:
sudo ln -s /usr/share/phpmyadmin /var/www/html
Note that for you, it may be /var/www/ and not /var/www/html, depending on your dir structure.
sudo ln -s /etc/phpmyadmin/apache.conf /etc/apache2/conf-available/phpmyadmin.conf
sudo ln -s /usr/share/phpmyadmin /var/www/html/phpmyadmin
sudo service apache2 restart
Run above commands issue will be resolved.
Run the following command in terminal:
sudo ln -s /usr/share/phpmyadmin /var/www/html/
It seems like sometime during the second half of 2018 many php packages such as php-mysql and phpmyadmin were removed or changed. I faced that same problem too. So you'll have to download it from another source or find out the new packages
You will need to configure your apache2.conf to make phpMyAdmin works.
sudo nano /etc/apache2/apache2.conf
Then add the following line to the end of the file.
Include /etc/phpmyadmin/apache.conf
Then restart apache
sudo service apache2 restart
I had the same issue where these fixes didn't work.
I'm on Ubuntu 20.04 using hestiaCP with Nginx.
Today after adding
Include /etc/phpmyadmin/apache.conf
into both Apache and Nginx, Nginx failed to restart. It was having an issue with "proxy_buffers" value.
Yesterday I had to modify the Nginx config to add and increase these values so Magento 2.4 would run. Today I altered "proxy_buffers" again
proxy_buffers 3 64k;
proxy_buffer_size 128k;
proxy_busy_buffers_size 128k;
After the second alteration and the removal of "Include /etc/phpmyadmin/apache.conf" from both Apache and Nginx, Magento 2.4 and PHPMyAdmin are working as expected.
I didn't try Rashmi Jain's symlink answer. It seems like it would work. But if it doesn't work for you, perhaps try this.
I just created the file `/etc/apache2/conf-available/phpmyadmin.conf' and added this line to it:
Include /etc/phpmyadmin/apache.conf
(rather than putting it into /etc/apache2/apache2.conf as in Anonymous Man's answer)
Then:
sudo a2enconf phpmyadmin
sudo systemctl reload apache2
I had the same problem after installing mysql, apache2, php and finally phpmyadmin after each other. In my case it was solved by restarting apache2 (no need to update any configuration file):
sudo systemctl restart apache2
#John smith, I was facing the same issue of not being able to access phpmyadmin for 3 days, I found the solution.
-- Get xampp, check this tutorial https://youtu.be/VHfij95yOpo
-- Run this command before starting xampp app
sudo /etc/init.d/apache2 stop
sudo service mysql stop
That's it, it worked for me
first go to the location of phpmyadmin via terminal then type this
code php -S localhost:8001
First check PhpMyAdmin is install or not. If it is installed then search PhpMyadmin folder. After search cut and paste that folder in location Computer->var->www->html->paste folder. Open browser and type localhost/phpMyAdmin and login using username and password.
If you are having this problem in 2019, go to your 000-default.conf file, by typing this subl /etc/apache2/sites-enabled/000-default.conf (in your terminal to open the file in sublime editor)
When the file loads, locate "The ServerName directive sets the request scheme" and place this "Include /etc/phpmyadmin/apache.conf" on top .
Then restart your apache with the command...service apache2 restart That will certainly fix the issue. Hope it helps!
Hello I am trying to install Prestashop on my LAMP server via SSH but when run the installation process. I got these error.
The Prestashop files are located in /var/www/html What should I do?
Thanks Morris Mukiri,
I tried all the chmod, chown, chgrp , but the prestashop error message still there .
Your suggestion of "allow apache do writes" worked !
setsebool -P httpd_enable_cgi on
setsebool -P httpd_unified on
setsebool -P httpd_builtin_scripting on
These few lines did the magic.
Find the Apache user and change the owner of the folders recursively.
E.g., if the Apache user is apache then:
chown -R apache:apache /var/www/html/config /var/www/html/cache...
Change the permissions for the document root folder
sudo chmod -R 755 /var/www/html/
You might want to add yourself to the same group as apache using
useradd -G {group-name} username
Try adding a rule in Selinux to allow apache do writes
sudo setsebool -P httpd_enable_cgi on
sudo setsebool -P httpd_unified on
sudo setsebool -P httpd_builtin_scripting on
I'm a beginner Ruby on Rails Programmer and I'm trying to install Apache2 + Passenger(That's for Rails Deployment).. and at the end of the installation process, Passenger gave me a few lines to add to the file apache2.conf at /etc/apache2/ but I can't override this file.. I have no permission =( I've also uploaded an image showing me the error.
P.S => I'm logged into Ubuntu with my username and password.
Please help! and thanks,
Rodrigo.
The simplest way is to open the file with the sudoedit program, as in
sudoedit /etc/apache2/apache2.conf
which will prompt for your password and then open your editor.
After the installation has completed, add phpmyadmin to the apache configuration.
sudo nano /etc/apache2/apache2.conf
Add the phpmyadmin config to the file. Include
/etc/phpmyadmin/apache.conf
Restart apache:
sudo service apache2 restart
If you are a beginner in GNU/Linux, I want to notice, for run command with root privileges run it with sudo:
sudo <your_command>
If you want to get root privileges for current terminal session (no need to type sudo each command) run:
sudo -i
I hope this will help someone considering the number of years since the last post. I tried this, and it worked for me.
sudo bash
Then the command to edit. Then save the file. Below is the site I got the procedure from.
https://ubuntuforums.org/showthread.php?t=1845306
Enter the command:
sudo nano /etc/apache2.conf
Or you can use the following chmod 777 usr/local/apache2/conf/httpd.conf
this will enable you to read/write the config file but be warned if you are planning on putting apache2 online you must revert it back to the old permissions chmod 640 usr/local/apache2/conf/httpd.conf