I'm trying to change the datatype of a column in SQL Server from tinyint to smallint.
But there's a default value on my column and I don't know the name of the constraint.
Is there an easy way to do it ?
This don't work because of the default constraint :
ALTER TABLE mytable
Alter Column myColumn smallint NOT NULL default 1
You need to do this in several steps - first: drop the default constraint on your column, then modify your column.
You could use code something like this:
-- find out the name of your default constraint -
-- assuming this is the only default constraint on your table
DECLARE #defaultconstraint sysname
SELECT #defaultconstraint = NAME
FROM sys.default_constraints
WHERE parent_object_id = object_ID('dbo.mytable')
-- declare a "DROP" statement to drop that default constraint
DECLARE #DropStmt NVARCHAR(500)
SET #DropStmt = 'ALTER TABLE dbo.mytable DROP CONSTRAINT ' + #defaultconstraint
-- drop the constraint
EXEC(#DropStmt)
-- alternatively: if you *know* the name of the default constraint - you can do this
-- more easily just by executing this single line of T-SQL code:
-- ALTER TABLE dbo.mytable DROP CONSTRAINT (fill in name of constraint here)
-- modify the column's datatype
ALTER TABLE dbo.mytable
Alter Column myColumn smallint NOT NULL
-- re-apply a default constraint - hint: give it a sensible name!
ALTER TABLE dbo.mytable
ADD CONSTRAINT DF_mytable_myColumn DEFAULT 1 FOR MyColumn
You could do it as a three step process
add the new column with a different name,
copy the values from the old column to the new
drop the old column
It it matters that the name is the same, then repeat the process to change the name back.
You can find the constraint name for the default using MS Management Studio. Just find the tables folder for the given DB and look under Constraints. If there are many constraints, you can "Script the Constraint(s) to a query window which show the associated column name.
i want to check for a particular set of values.
eg
check columnname should be between 1 to 5
check columnname should be either 1 or 2 or 4
There is quite a wealth of information in the SQL Server documentation on this, but the two statements to create the check constraints you ask for are:
ALTER TABLE tablename ADD CONSTRAINT constraintName CHECK (colname between 1 and 5);
ALTER TABLE tablename ADD CONSTRAINT constraintName CHECK (colname in (1,2,4));
The condition of a check constraint can include:
A list of constant expressions introduced with in
A range of constant expressions introduced with between
A set of conditions introduced with like, which may contain wildcard characters
This allows you to have conditions like:
(colname >= 1 AND colname <= 5)
ALTER TABLE tablename ADD CONSTRAINT constraintName CHECK (colname in (1,2,4));
This is probably a simple answer but I can't find it. I have a table with a column of integers and I want to ensure that when a row is inserted that the value in this column is greater than zero. I could do this on the code side but thought it would be best to enforce it on the table.
Thanks!
I was in error with my last comment all is good now.
You can use a check constraint on the column. IIRC the syntax for this looks like:
create table foo (
[...]
,Foobar int not null check (Foobar > 0)
[...]
)
As the poster below says (thanks Constantin), you should create the check constraint outside the table definition and give it a meaningful name so it is obvious which column it applies to.
alter table foo
add constraint Foobar_NonNegative
check (Foobar > 0)
You can get out the text of check constraints from the system data dictionary in sys.check_constraints:
select name
,description
from sys.check_constraints
where name = 'Foobar_NonNegative'
Create a database constraint:
ALTER TABLE Table1 ADD CONSTRAINT Constraint1 CHECK (YourCol > 0)
You can have pretty sophisticated constraints, too, involving multiple columns. For example:
ALTER TABLE Table1 ADD CONSTRAINT Constraint2 CHECK (StartDate<EndDate OR EndDate IS NULL)
I believe you want to add a CONSTRAINT to the table field:
ALTER TABLE tableName WITH NOCHECK
ADD CONSTRAINT constraintName CHECK (columnName > 0)
That optional NOCHECK is used to keep the constraint from being applied to existing rows of data (which could contain invalid data) & to allow the constraint to be added.
Add a CHECK constraint when creating your table
CREATE TABLE Test(
[ID] [int] NOT NULL,
[MyCol] [int] NOT NULL CHECK (MyCol > 1)
)
you can alter your table and add new constraint like bellow.
BEGIN TRANSACTION
GO
ALTER TABLE dbo.table1 ADD CONSTRAINT
CK_table1_field1 CHECK (field1>0)
GO
ALTER TABLE dbo.table1 SET (LOCK_ESCALATION = TABLE)
GO
COMMIT
How can I add a column with a default value to an existing table in SQL Server 2000 / SQL Server 2005?
Syntax:
ALTER TABLE {TABLENAME}
ADD {COLUMNNAME} {TYPE} {NULL|NOT NULL}
CONSTRAINT {CONSTRAINT_NAME} DEFAULT {DEFAULT_VALUE}
WITH VALUES
Example:
ALTER TABLE SomeTable
ADD SomeCol Bit NULL --Or NOT NULL.
CONSTRAINT D_SomeTable_SomeCol --When Omitted a Default-Constraint Name is autogenerated.
DEFAULT (0)--Optional Default-Constraint.
WITH VALUES --Add if Column is Nullable and you want the Default Value for Existing Records.
Notes:
Optional Constraint Name:
If you leave out CONSTRAINT D_SomeTable_SomeCol then SQL Server will autogenerate
a Default-Contraint with a funny Name like: DF__SomeTa__SomeC__4FB7FEF6
Optional With-Values Statement:
The WITH VALUES is only needed when your Column is Nullable
and you want the Default Value used for Existing Records.
If your Column is NOT NULL, then it will automatically use the Default Value
for all Existing Records, whether you specify WITH VALUES or not.
How Inserts work with a Default-Constraint:
If you insert a Record into SomeTable and do not Specify SomeCol's value, then it will Default to 0.
If you insert a Record and Specify SomeCol's value as NULL (and your column allows nulls),
then the Default-Constraint will not be used and NULL will be inserted as the Value.
Notes were based on everyone's great feedback below.
Special Thanks to:
#Yatrix, #WalterStabosz, #YahooSerious, and #StackMan for their Comments.
ALTER TABLE Protocols
ADD ProtocolTypeID int NOT NULL DEFAULT(1)
GO
The inclusion of the DEFAULT fills the column in existing rows with the default value, so the NOT NULL constraint is not violated.
When adding a nullable column, WITH VALUES will ensure that the specific DEFAULT value is applied to existing rows:
ALTER TABLE table
ADD column BIT -- Demonstration with NULL-able column added
CONSTRAINT Constraint_name DEFAULT 0 WITH VALUES
ALTER TABLE <table name>
ADD <new column name> <data type> NOT NULL
GO
ALTER TABLE <table name>
ADD CONSTRAINT <constraint name> DEFAULT <default value> FOR <new column name>
GO
ALTER TABLE MYTABLE ADD MYNEWCOLUMN VARCHAR(200) DEFAULT 'SNUGGLES'
The most basic version with two lines only
ALTER TABLE MyTable
ADD MyNewColumn INT NOT NULL DEFAULT 0
Beware when the column you are adding has a NOT NULL constraint, yet does not have a DEFAULT constraint (value). The ALTER TABLE statement will fail in that case if the table has any rows in it. The solution is to either remove the NOT NULL constraint from the new column, or provide a DEFAULT constraint for it.
Use:
-- Add a column with a default DateTime
-- to capture when each record is added.
ALTER TABLE myTableName
ADD RecordAddedDate SMALLDATETIME NULL DEFAULT (GETDATE())
GO
If you want to add multiple columns you can do it this way for example:
ALTER TABLE YourTable
ADD Column1 INT NOT NULL DEFAULT 0,
Column2 INT NOT NULL DEFAULT 1,
Column3 VARCHAR(50) DEFAULT 'Hello'
GO
To add a column to an existing database table with a default value, we can use:
ALTER TABLE [dbo.table_name]
ADD [Column_Name] BIT NOT NULL
Default ( 0 )
Here is another way to add a column to an existing database table with a default value.
A much more thorough SQL script to add a column with a default value is below including checking if the column exists before adding it also checkin the constraint and dropping it if there is one. This script also names the constraint so we can have a nice naming convention (I like DF_) and if not SQL will give us a constraint with a name which has a randomly generated number; so it's nice to be able to name the constraint too.
-------------------------------------------------------------------------
-- Drop COLUMN
-- Name of Column: Column_EmployeeName
-- Name of Table: table_Emplyee
--------------------------------------------------------------------------
IF EXISTS (
SELECT 1
FROM INFORMATION_SCHEMA.COLUMNS
WHERE TABLE_NAME = 'table_Emplyee'
AND COLUMN_NAME = 'Column_EmployeeName'
)
BEGIN
IF EXISTS ( SELECT 1
FROM sys.default_constraints
WHERE object_id = OBJECT_ID('[dbo].[DF_table_Emplyee_Column_EmployeeName]')
AND parent_object_id = OBJECT_ID('[dbo].[table_Emplyee]')
)
BEGIN
------ DROP Contraint
ALTER TABLE [dbo].[table_Emplyee] DROP CONSTRAINT [DF_table_Emplyee_Column_EmployeeName]
PRINT '[DF_table_Emplyee_Column_EmployeeName] was dropped'
END
-- ----- DROP Column -----------------------------------------------------------------
ALTER TABLE [dbo].table_Emplyee
DROP COLUMN Column_EmployeeName
PRINT 'Column Column_EmployeeName in images table was dropped'
END
--------------------------------------------------------------------------
-- ADD COLUMN Column_EmployeeName IN table_Emplyee table
--------------------------------------------------------------------------
IF NOT EXISTS (
SELECT 1
FROM INFORMATION_SCHEMA.COLUMNS
WHERE TABLE_NAME = 'table_Emplyee'
AND COLUMN_NAME = 'Column_EmployeeName'
)
BEGIN
----- ADD Column & Contraint
ALTER TABLE dbo.table_Emplyee
ADD Column_EmployeeName BIT NOT NULL
CONSTRAINT [DF_table_Emplyee_Column_EmployeeName] DEFAULT (0)
PRINT 'Column [DF_table_Emplyee_Column_EmployeeName] in table_Emplyee table was Added'
PRINT 'Contraint [DF_table_Emplyee_Column_EmployeeName] was Added'
END
GO
These are two ways to add a column to an existing database table with a default value.
Use:
ALTER TABLE {TABLENAME}
ADD {COLUMNNAME} {TYPE} {NULL|NOT NULL}
CONSTRAINT {CONSTRAINT_NAME} DEFAULT {DEFAULT_VALUE}
Reference: ALTER TABLE (Transact-SQL) (MSDN)
You can do the thing with T-SQL in the following way.
ALTER TABLE {TABLENAME}
ADD {COLUMNNAME} {TYPE} {NULL|NOT NULL}
CONSTRAINT {CONSTRAINT_NAME} DEFAULT {DEFAULT_VALUE}
As well as you can use SQL Server Management Studio also by right clicking table in the Design menu, setting the default value to table.
And furthermore, if you want to add the same column (if it does not exists) to all tables in database, then use:
USE AdventureWorks;
EXEC sp_msforeachtable
'PRINT ''ALTER TABLE ? ADD Date_Created DATETIME DEFAULT GETDATE();''' ;
In SQL Server 2008-R2, I go to the design mode - in a test database - and add my two columns using the designer and made the settings with the GUI, and then the infamous Right-Click gives the option "Generate Change Script"!
Bang up pops a little window with, you guessed it, the properly formatted guaranteed-to-work change script. Hit the easy button.
Alternatively, you can add a default without having to explicitly name the constraint:
ALTER TABLE [schema].[tablename] ADD DEFAULT ((0)) FOR [columnname]
If you have an issue with existing default constraints when creating this constraint then they can be removed by:
alter table [schema].[tablename] drop constraint [constraintname]
This can be done in the SSMS GUI as well. I show a default date below but the default value can be whatever, of course.
Put your table in design view (Right click on the table in object
explorer->Design)
Add a column to the table (or click on the column you want to update if
it already exists)
In Column Properties below, enter (getdate()) or 'abc' or 0 or whatever value you want in Default Value or Binding field as pictured below:
ALTER TABLE ADD ColumnName {Column_Type} Constraint
The MSDN article ALTER TABLE (Transact-SQL) has all of the alter table syntax.
Example:
ALTER TABLE [Employees] ADD Seniority int not null default 0 GO
Example:
ALTER TABLE tes
ADD ssd NUMBER DEFAULT '0';
First create a table with name student:
CREATE TABLE STUDENT (STUDENT_ID INT NOT NULL)
Add one column to it:
ALTER TABLE STUDENT
ADD STUDENT_NAME INT NOT NULL DEFAULT(0)
SELECT *
FROM STUDENT
The table is created and a column is added to an existing table with a default value.
This is for SQL Server:
ALTER TABLE TableName
ADD ColumnName (type) -- NULL OR NOT NULL
DEFAULT (default value)
WITH VALUES
Example:
ALTER TABLE Activities
ADD status int NOT NULL DEFAULT (0)
WITH VALUES
If you want to add constraints then:
ALTER TABLE Table_1
ADD row3 int NOT NULL
CONSTRAINT CONSTRAINT_NAME DEFAULT (0)
WITH VALUES
This has a lot of answers, but I feel the need to add this extended method. This seems a lot longer, but it is extremely useful if you're adding a NOT NULL field to a table with millions of rows in an active database.
ALTER TABLE {schemaName}.{tableName}
ADD {columnName} {datatype} NULL
CONSTRAINT {constraintName} DEFAULT {DefaultValue}
UPDATE {schemaName}.{tableName}
SET {columnName} = {DefaultValue}
WHERE {columName} IS NULL
ALTER TABLE {schemaName}.{tableName}
ALTER COLUMN {columnName} {datatype} NOT NULL
What this will do is add the column as a nullable field and with the default value, update all fields to the default value (or you can assign more meaningful values), and finally it will change the column to be NOT NULL.
The reason for this is if you update a large scale table and add a new not null field it has to write to every single row and hereby will lock out the entire table as it adds the column and then writes all the values.
This method will add the nullable column which operates a lot faster by itself, then fills the data before setting the not null status.
I've found that doing the entire thing in one statement will lock out one of our more active tables for 4-8 minutes and quite often I have killed the process. This method each part usually takes only a few seconds and causes minimal locking.
Additionally, if you have a table in the area of billions of rows it may be worth batching the update like so:
WHILE 1=1
BEGIN
UPDATE TOP (1000000) {schemaName}.{tableName}
SET {columnName} = {DefaultValue}
WHERE {columName} IS NULL
IF ##ROWCOUNT < 1000000
BREAK;
END
Try this
ALTER TABLE Product
ADD ProductID INT NOT NULL DEFAULT(1)
GO
SQL Server + Alter Table + Add Column + Default Value uniqueidentifier
ALTER TABLE Product
ADD ReferenceID uniqueidentifier not null
default (cast(cast(0 as binary) as uniqueidentifier))
--Adding Value with Default Value
ALTER TABLE TestTable
ADD ThirdCol INT NOT NULL DEFAULT(0)
GO
IF NOT EXISTS (
SELECT * FROM INFORMATION_SCHEMA.COLUMNS
WHERE TABLE_NAME ='TABLENAME' AND COLUMN_NAME = 'COLUMNNAME'
)
BEGIN
ALTER TABLE TABLENAME ADD COLUMNNAME Nvarchar(MAX) Not Null default
END
Add a new column to a table:
ALTER TABLE [table]
ADD Column1 Datatype
For example,
ALTER TABLE [test]
ADD ID Int
If the user wants to make it auto incremented then:
ALTER TABLE [test]
ADD ID Int IDENTITY(1,1) NOT NULL
Try with the below query:
ALTER TABLE MyTable
ADD MyNewColumn DataType DEFAULT DefaultValue
This will add a new column into the Table.
This can be done by the below code.
CREATE TABLE TestTable
(FirstCol INT NOT NULL)
GO
------------------------------
-- Option 1
------------------------------
-- Adding New Column
ALTER TABLE TestTable
ADD SecondCol INT
GO
-- Updating it with Default
UPDATE TestTable
SET SecondCol = 0
GO
-- Alter
ALTER TABLE TestTable
ALTER COLUMN SecondCol INT NOT NULL
GO
There are 2 different ways to address this problem.
Both adds a default value but adds a totally different meaning to the problem statement here.
Lets start with creating some sample data.
Create Sample Data
CREATE TABLE ExistingTable (ID INT)
GO
INSERT INTO ExistingTable (ID)
VALUES (1), (2), (3)
GO
SELECT *
FROM ExistingTable
1.Add Columns with Default Value for Future Inserts
ALTER TABLE ExistingTable
ADD ColWithDefault VARCHAR(10) DEFAULT 'Hi'
GO
So now as we have added a default column when we are inserting a new record it will default it's value to 'Hi' if value not provided
INSERT INTO ExistingTable(ID)
VALUES (4)
GO
Select * from ExistingTable
GO
Well this addresses our problem to have default value but here is a catch to the problem.
What if we want to have default value in all the columns not just the future inserts???
For this we have Method 2.
2.Add Column with Default Value for ALL Inserts
ALTER TABLE ExistingTable
ADD DefaultColWithVal VARCHAR(10) DEFAULT 'DefaultAll'
WITH VALUES
GO
Select * from ExistingTable
GO
The following script will add a new column with a default value in every possible scenario.
Hope it adds value to the question asked.
Thanks.
Well, I now have some modification to my previous answer. I have noticed that none of the answers mentioned IF NOT EXISTS. So I am going to provide a new solution of it as I have faced some problems altering the table.
IF NOT EXISTS (SELECT * FROM INFORMATION_SCHEMA.columns WHERE table_name = 'TaskSheet' AND column_name = 'IsBilledToClient')
BEGIN
ALTER TABLE dbo.TaskSheet ADD
IsBilledToClient bit NOT NULL DEFAULT ((1))
END
GO
Here TaskSheet is the particular table name and IsBilledToClient is the new column which you are going to insert and 1 the default value. That means in the new column what will be the value of the existing rows, therefore one will be set automatically there. However, you can change as you wish with the respect of the column type like I have used BIT, so I put in default value 1.
I suggest the above system, because I have faced a problem. So what is the problem? The problem is, if the IsBilledToClient column does exists in the table table then if you execute only the portion of the code given below you will see an error in the SQL server Query builder. But if it does not exist then for the first time there will be no error when executing.
ALTER TABLE {TABLENAME}
ADD {COLUMNNAME} {TYPE} {NULL|NOT NULL}
CONSTRAINT {CONSTRAINT_NAME} DEFAULT {DEFAULT_VALUE}
[WITH VALUES]