I'm trying to make a sum of the variable value/valeur with some conditions but I obtain this error: Invalid column name 'SUM'.
SELECT SUM[value/valeur]
FROM [dbo].[tmp_norm_can]
WHERE [state/etat] = '1000'
AND [geo/geo] = '1'
AND [country/pays] != '999'
I attached an image of the database
Thank you very much!
enter image description here
sum is a function, you need to pass its argument in parentheses:
SELECT SUM([value/valeur])
FROM [dbo].[tmp_norm_can]
WHERE [state/etat] = '1000'
AND [geo/geo] = '1'
AND [country/pays] != '999'
Thank you!
The code that worked was:
SELECT SUM(CAST([value/valeur] AS NUMERIC)) AS "TOTAL", [year/annee] FROM [dbo].[tmp_norm_can] WHERE [state/etat] = '1000' AND [geo/geo] = '1' AND [country/pays] != '999'
Try aliasing your column with a name different than "SUM".
Related
I am attempting to us the CASE statement for the first time and I cannot understand why I am getting a syntax error on the last WHEN and ELSE. I am trying to extract a substring if a value starts with a specific set of characters. My Code is below:
SELECT
CASE
WHEN LEFT ([RCode],2) = 'BB' THEN SUBSTRING([RCode],3,LEN([RCode]))
WHEN LEFT ([RCode],4) = 'APT-' THEN SUBSTRING([RCode],5,LEN([RCode])
WHEN LEFT ([RCode],4) = 'PS-' THEN SUBSTRING([RCode],4,LEN([RCode])
ELSE [RCode]
END
FROM [Xperdyte].[dbo].[tJCLines]
Any guidance would be appreciated.
This won't (necessarily) fix your syntax problem, but I would recommend that you use like for the comparisons:
SELECT (CASE WHEN RCode LIKE 'BB%' THEN SUBSTRING([RCode], 3, LEN([RCode]))
WHEN RCode LIKE 'APT-%' THEN SUBSTRING([RCode], 5, LEN([RCode]))
WHEN RCode LIKE 'PS-%' THEN SUBSTRING([RCode], 4, LEN([RCode]))
ELSE [RCode]
END)
FROM [Xperdyte].[dbo].[tJCLines];
Then you don't have to count characters -- and the third condition will match.
Missed off two right parenthesis.
SELECT CASE WHEN LEFT([RCode],2) = 'BB'
THEN SUBSTRING([RCode],3,LEN([RCode]))
WHEN LEFT([RCode],4) = 'APT-'
THEN SUBSTRING([RCode],5,LEN([RCode]))
WHEN LEFT([RCode],4) = 'PS-'
THEN SUBSTRING([RCode],4,LEN([RCode]))
ELSE [RCode]
END
FROM [Xperdyte].[dbo].[tJCLines]
select fti.pa_serial_,fti.homeownerm_name,fti.ward_,fti.villagetole,fti.status,
ftrq.date_reporting, ftrq.name_of_recorder_reporting,
case
when fti.status='terminate' then ftrq.is_the_site_cleared ='1' end as is_the_site_cleared from fti join ftrq on ftrq.fulcrum_parent_id = fti.fulcrum_id
Here, is_the_site_cleared is text type of column which is converted into boolean by the when statement written and hence does not print as 1 and takes as true. I explicitly used print '1'. But this also did not work. My aim is to display '1' in the column 'is_the_site_cleared' when the value of fti.status='terminate'. Please help!!!
How about using integers rather than booleans?
select fti.pa_serial_, fti.homeownerm_name, fti.ward_,
fti.villagetole, fti.status, ftrq.date_reporting,
ftrq.name_of_recorder_reporting,
(case when fti.status = 'terminate' -- and ftrq.is_the_site_cleared = '1'
then 1 else 0
end) as is_the_site_cleared
from fti join
ftrq
on ftrq.fulcrum_parent_id = fti.fulcrum_id ;
From the description, I cannot tell if you want to include the condition ftrq.is_the_site_cleared = '1' in the when condition. But the idea is to have the then and else return numbers if that is what you want to see.
I'm trying to get the last record from this query but i don't know how to do it. I used ROW_NUMBER but my program (Protheus ADVPL) don't have resources to get the last line from a query
SELECT ROW_NUMBER() OVER (ORDER BY B1_MASTER, B1_COD) AS ID,
B1_COD,
B1_DESC,
B1_CATEG,
B1_MASTER,
A2_COMPRAD,
ISNULL((SELECT Sum(C6_QTDVEN * C6_PRCVEN)
FROM SC6010 SC6,
SF4010 SF4,
SC5010 SC5
WHERE C6_FILIAL = '01'
AND C6_PRODUTO = B1_COD
AND SC6.D_E_L_E_T_ <> '*'
AND C5_FILIAL = C6_FILIAL
AND C5_NUM = C6_NUM
AND C5_EMISSAO BETWEEN '20160401' AND '20160404'
AND C5_TIPO = 'N'
AND C5_MODAL = '2'
AND SC5.D_E_L_E_T_ <> '*'
(query have 106 lines so i ll not put everything)
I need the total records in a column, like this:
Tabela
What can i do?
Tks
You can use MAX(field) too.
But, you're using ADVPL, so you could use dbSeek instead to find the last RECNO.
So, using "work area" you can find the last record with this:
TRB->(RECCOUNT())
I changed ROW_NUMBER to ##ROWCOUNT and it works! Tks all
I faced the following requirement. The following query is called by a procedure. The value p_pac_code is the input parameter of the procedure.
The requirement is the query should have an additional condition sp_sbsp.SUBSPCLTY_CODE!='C430 if the p_pac_code value is '008'.
For any other p_pac_code value, it should run as it is below. Is there way to do this by adding an additional condition in the WHERE clause?
As for now, I have done this using IF.....ELSE using the query two times separately depending on p_pac_code value. But I am required to find a way to do with just adding a condition to this single query.
SELECT ptg.group_cid
FROM PRVDR_TYPE_X_SPCLTY_SUBSPCLTY ptxss,
PT_X_SP_SSP_STATUS pxsst ,
pt_sp_ssp_x_group ptg,
group_x_group_store gg,
specialty_subspecialty sp_sbsp,
treatment_type tt,
provider_type pt
WHERE
pt.PRVDR_TYPE_CODE = ptxss.PRVDR_TYPE_CODE
AND tt.TRTMNT_TYPE_CODE = pxsst.TRTMNT_TYPE_CODE
AND ptxss.PRVDR_TYPE_X_SPCLTY_SID = pxsst.PRVDR_TYPE_X_SPCLTY_SID
AND tt.TRTMNT_TYPE_CODE = p_pac_code
AND TRUNC(SYSDATE) BETWEEN TRUNC(PXSST.FROM_DATE) AND TRUNC(PXSST.TO_DATE)
AND ptg.prvdr_type_code =ptxss.prvdr_type_code
AND ptg.spclty_subspclty_sid = ptxss.spclty_subspclty_sid
AND ptxss.spclty_subspclty_sid = sp_sbsp.spclty_subspclty_sid
AND ptg.spclty_subspclty_sid = sp_sbsp.spclty_subspclty_sid
AND ptg.status_cid = 2
AND ptg.group_cid = gg.group_cid
AND gg.group_store_cid = 16
AND gg.status_cid = 2;
Thanks in advance.
You can simply add a condition like this:
... and (
( sp_sbsp.SUBSPCLTY_CODE!='C430' and p_pac_code = '008')
OR
NVL(p_pac_code, '-') != '008'
)
This can be re-written in different ways, this one is quite self-explanatory
Just add:
AND NOT ( NVL( sp_sbsp.SUBSPCLTY_CODE, 'x' ) = 'C430'
AND NVL( p_pac_code value, 'x' ) = '008' )
to the where clause.
The NVL function is used so that it will match NULL values (if they exist in your data); otherwise, even though NULL does not match C430 you will still find that NULL = 'C430' and NULL <> 'C430' and NOT( NULL = 'C430' ) will all return false.
Quite easy. Add the following condition:
AND (sp_sbsp.SUBSPCLTY_CODE != 'C430' OR p_pac_code value != '008')
(don't forget the parenthesis)
Just sharing
SELECT ptg.group_cid
FROM PRVDR_TYPE_X_SPCLTY_SUBSPCLTY ptxss
WHERE
pt.PRVDR_TYPE_CODE = ptxss.PRVDR_TYPE_CODE
&&((tt.TRTMNT_TYPE_CODE = pxsst.TRTMNT_TYPE_CODE)
or (tt.TRTMNT_TYPE_CODE = pxsst.TRTMNT_TYPE_CODE))
just use the parenthesis to specify where the conditionmust implement.
I have a query which is working fine..
SELECT
WSDEFN.WORKSPACE_DISPLAY_NM,
LAYDEFN.LAYOUT_DISPLAY_NM,
WSLMAP.POSITION,
LAYDEFN.LAYOUT,
LAYDEFN.PROPORTION,
LAYDEFN.LAYOUT_ID,
WSDEFN.WORKSPACE_ID,
LAYDEFN.BUNDLE_KEY
FROM
WORKSPACE_DEFINITION WSDEFN,
WORKSPACE_LAYOUT_MAP WSLMAP,
LAYOUT_DEFINITION LAYDEFN
WHERE
WORKSPACE_ID = WSLMAP.WORKSPACE_ID
AND WSLMAP.LAYOUT_ID = LAYDEFN.LAYOUT_ID
AND WSDEFN.OD_USER_NO = '-1'
AND WSDEFN.OD_GCIF = '-1'
ORDER BY
wsdefn.workspace_id, WSLMAP.POSITION
But I want to fetch the WSDEFN.WORKSPACE_ID as WORKSPACE_ID.
I tried this
WSDEFN.WORKSPACE_ID AS WORKSPACE_ID,
but I get an error
'column ambiguously defined'
Could you give me a solution?
It seems to be missing the table alias in the where clause.
Did you try this?
SELECT
WSDEFN.WORKSPACE_DISPLAY_NM,
LAYDEFN.LAYOUT_DISPLAY_NM,
WSLMAP.POSITION,
LAYDEFN.LAYOUT,
LAYDEFN.PROPORTION,
LAYDEFN.LAYOUT_ID,
WSDEFN.WORKSPACE_ID AS WORKSPACE_ID,
LAYDEFN.BUNDLE_KEY
FROM
WORKSPACE_DEFINITION WSDEFN,
WORKSPACE_LAYOUT_MAP WSLMAP,
LAYOUT_DEFINITION LAYDEFN
WHERE
WSDEFN.WORKSPACE_ID = WSLMAP.WORKSPACE_ID
AND
WSLMAP.LAYOUT_ID = LAYDEFN.LAYOUT_ID
AND
WSDEFN.OD_USER_NO='-1' AND WSDEFN.OD_GCIF='-1'
ORDER BY
wsdefn.workspace_id,WSLMAP.POSITION