My goal is to select all the columns that start and end with the same 3 strings as the first row.
In this case it was simple, since the CONCAT was equal to 'SCLMIA'
AND CONCAT(origin, destination) = 'SCLMIA'
AND ((flight_path LIKE '%SCL%' AND flight_path LIKE '%MIA%')
but now the difficulty is for multiple strings.
AND CONCAT(origin, destination) IN ('SCLMIA', 'SCLIQQ','SCLMAD', 'LIMCUZ', 'BOGMDE', 'FORGRU', 'SDUCGH', 'SCLGRU', 'BOGLIM', 'GYEUIO')
AND (**here I need to replicate the same as above.**)
I read that it can be with the functions SUBSTRING, LEFT AND RIGHT selecting the three first and last strings but I don't know how to do it.
Tried with this, but failed:
AND (flight_path LIKE '%' + SUBSTR(flight_path,3, LENGTH(flight_path) - 4) + '%')
It should be noted that it is a chain of conditions that's why start with AND.
Edit:
Image: Sample of data single path 'SCLMIA'
It's from Bigquery.
I think this is what you're trying to do:
SELECT *
FROM
flight_paths
WHERE
CONCAT(origin, destination) IN ('SCLMIA', 'SCLIQQ', 'SCLMAD', 'LIMCUZ', 'BOGMDE', 'FORGRU', 'SDUCGH', 'SCLGRU', 'BOGLIM', 'GYEUIO')
AND RIGHT(flight_path, 3) = origin
AND LEFT(flight_path, 3) = destination
Here's a db-fiddle that demonstrates the answer:
https://www.db-fiddle.com/f/vUZ4HL4NC9xaBBZpwTYNcR/0
Related
I have the following select statement in ABAP:
SELECT munic~mandt VREFER BIS AB ZZELECDATE ZZCERTDATE CONSYEAR ZDIMO ZZONE_M ZZONE_T USAGE_M USAGE_T M2MC M2MT M2RET EXEMPTMCMT EXEMPRET CHARGEMCMT
INTO corresponding fields of table GT_INSTMUNIC_F
FROM ZCI00_INSTMUNIC AS MUNIC
INNER JOIN EVER AS EV on
MUNIC~POD = EV~VREFER(9).
"where EV~BSTATUS = '14' or EV~BSTATUS = '32'.
My problem with the above statement is that does not recognize the substring/offset operation on the 'ON' clause. If i remove the '(9) then
it recognizes the field, otherwise it gives error:
Field ev~refer is unknown. It is neither in one of the specified tables
nor defined by a "DATA" statement. I have also tried doing something similar in the 'Where' clause, receiving a similar error:
LOOP AT gt_instmunic.
clear wa_gt_instmunic_f.
wa_gt_instmunic_f-mandt = gt_instmunic-mandt.
wa_gt_instmunic_f-bis = gt_instmunic-bis.
wa_gt_instmunic_f-ab = gt_instmunic-ab.
wa_gt_instmunic_f-zzelecdate = gt_instmunic-zzelecdate.
wa_gt_instmunic_f-ZZCERTDATE = gt_instmunic-ZZCERTDATE.
wa_gt_instmunic_f-CONSYEAR = gt_instmunic-CONSYEAR.
wa_gt_instmunic_f-ZDIMO = gt_instmunic-ZDIMO.
wa_gt_instmunic_f-ZZONE_M = gt_instmunic-ZZONE_M.
wa_gt_instmunic_f-ZZONE_T = gt_instmunic-ZZONE_T.
wa_gt_instmunic_f-USAGE_M = gt_instmunic-USAGE_M.
wa_gt_instmunic_f-USAGE_T = gt_instmunic-USAGE_T.
temp_pod = gt_instmunic-pod.
SELECT vrefer
FROM ever
INTO wa_gt_instmunic_f-vrefer
WHERE ( vrefer(9) LIKE temp_pod ). " PROBLEM WITH SUBSTRING
"AND ( BSTATUS = '14' OR BSTATUS = '32' ).
ENDSELECT.
WRITE: / sy-dbcnt.
WRITE: / 'wa is: ', wa_gt_instmunic_f.
WRITE: / 'wa-ever is: ', wa_gt_instmunic_f-vrefer.
APPEND wa_gt_instmunic_f TO gt_instmunic_f.
WRITE: / wa_gt_instmunic_f-vrefer.
ENDLOOP.
itab_size = lines( gt_instmunic_f ).
WRITE: / 'Internal table populated with', itab_size, ' lines'.
The basic task i want to implement is to modify a specific field on one table,
pulling values from another. They have a common field ( pod = vrefer(9) ). Thanks in advance for your time.
If you are on a late enough NetWeaver version, it works on 7.51, you can use the OpenSQL function LEFT or SUBSTRING. Your query would look something like:
SELECT munic~mandt VREFER BIS AB ZZELECDATE ZZCERTDATE CONSYEAR ZDIMO ZZONE_M ZZONE_T USAGE_M USAGE_T M2MC M2MT M2RET EXEMPTMCMT EXEMPRET CHARGEMCMT
FROM ZCI00_INSTMUNIC AS MUNIC
INNER JOIN ever AS ev
ON MUNIC~POD EQ LEFT( EV~VREFER, 9 )
INTO corresponding fields of table GT_INSTMUNIC_F.
Note that the INTO clause needs to move to the end of the command as well.
field(9) is a subset operation that is processed by the ABAP environment and can not be translated into a database-level SQL statement (at least not at the moment, but I'd be surprised if it ever will be). Your best bet is either to select the datasets separately and merge them manually (if both are approximately equally large) or pre-select one and use a FAE/IN clause.
They have a common field ( pod = vrefer(9) )
This is a wrong assumption, because they both are not fields, but a field an other thing.
If you really need to do that task through SQL, I'll suggest you to check native SQL sentences like SUBSTRING and check if you can manage to use them within an EXEC_SQL or (better) the CL_SQL* classes.
I'm reading and executing sql queries from file and I need to inspect the result sets to count all the null values across all columns. Because the SQL is read from file, I don't know the column names and thus can't call the columns by name when trying to find the null values.
I think using CTE is the best way to do this, but how can I call the columns when I don't know what the column names are?
WITH query_results AS
(
<sql_read_from_file_here>
)
select count_if(<column_name> is not null) FROM query_results
If you are using Python to read the file of SQL statements, you can do something like this which uses pglast to parse the SQL query to get the columns for you:
import pglast
sql_read_from_file_here = "SELECT 1 foo, 1 bar"
ast = pglast.parse_sql(sql_read_from_file_here)
cols = ast[0]['RawStmt']['stmt']['SelectStmt']['targetList']
sum_stmt = "sum(iff({col} is null,1,0))"
sums = [sum_sql.format(col = col['ResTarget']['name']) for col in cols]
print(f"select {' + '.join(sums)} total_null_count from query_results")
# outputs: select sum(iff(foo is null,1,0)) + sum(iff(bar is null,1,0)) total_null_count from query_results
i have this query
insert into changes (id_registro)
select d2.id_registro
from daily2 d2
where exists (
select 1
from daily d1
where
d1.id_registro = d2.id_registro
and (d2.origen, d2.sector, d2.entidad_um, d2.sexo, d2.entidad_nac, d2.entidad_res,
d2.municipio_res, d2.tipo_paciente,d2.fecha_ingreso, d2.fecha_sintomas,
d2.fecha_def, d2.intubado, d2.neumonia, d2.edad, d2.nacionalidad, d2.embarazo,
d2.habla_lengua_indig, d2.diabetes, d2.epoc, d2.asma, d2.inmusupr, d2.hipertension,
d2.otra_com, d2.cardiovascular, d2.obesidad,
d2.renal_cronica, d2.tabaquismo, d2.otro_caso, d2.resultado, d2.migrante,
d2.pais_nacionalidad, d2.pais_origen, d2.uci )
<>
(d1.origen, d1.sector, d1.entidad_um, d1.sexo, d1.entidad_nac, d1.entidad_res,
d1.municipio_res, d1.tipo_paciente, d1.fecha_ingreso, d1.fecha_sintomas,
d1.fecha_def, d1.intubado, d1.neumonia, d1.edad, d1.nacionalidad, d1.embarazo,
d1.habla_lengua_indig, d1.diabetes, d1.epoc, d1.asma, d1.inmusupr, d1.hipertension,
d1.otra_com, d1.cardiovascular, d1.obesidad,
d1.renal_cronica, d1.tabaquismo, d1.otro_caso, d1.resultado, d1.migrante,
d1.pais_nacionalidad, d1.pais_origen, d1.uci ))
it results in an insersion data that doesn't exist in another table, that's fine. but i want know exactly which field has changed to store it in a log table
You don't mention precisely what you expect to see in your output but basically to accomplish what you're after you'll need a long sequence of CASE clauses, one for each column
e.g. one approach might be to create a comma-separated list of the column names that have changed:
INSERT INTO changes (id_registro, column_diffs)
SELECT d2.id_registro,
CONCAT(
CASE WHEN d1.origen <> d2.origen THEN 'Origen,' ELSE '' END,
CASE WHEN d1.sector <> d2.sector THEN 'Sector,' ELSE '' END,
etc.
Within the THEN part of the CASE you can build whatever detail you want to show
e.g. a string showing before and after values of the columns CONCAT('Origen: Was==> ', d1.origen, ' Now==>', d2.origen). Presumably though you'll also need to record the times of these changes if there can be multiple updates to the same record throughout the day.
Essentially you'll need to decide what information you want to show in your logfile, but based on your example query you should have all the information you need.
I am wondering what approach should have been selected to perform action from title. I am using ODBC connection and what I get from first sql query are like 40-50 rows in one column. What I want is to put this output as a values in to search for.
How should i treat this? Like a array or separated variables? I still do not know R well so just need to know where to search for.
Regards
------more explanation below----
I have list of 40-50 numbers of 10 digits each, organized in a column.
I am trying to do this:
list <- c(my_input)
sql_in <- paste0(list, collapse="")
and characters are organized like this after this operations:
'c(1234567890, , 1234567890, 1234567890)'
and almost all looks fine and fit into my query besides additional c character at the beginning and missing apostrophes.I try to use gsub function but did not work in way I want.
You may likely do this in one SQL call using a subquery. Notice in the call below that the result of
SELECT n_gear
FROM Gear
WHERE n_gear IN (3,4)
Is passed to the WHERE clause of the primary query. This is perfectly valid and will allow your query to execute entirely in SQL without having to do any intermediate steps in R.
(I use sqldf for simplicity of illustration, but this should work through just about any ODBC connection)
library(sqldf)
Gear <- data.frame(n_gear = 1:5)
sqldf(
"SELECT mpg, qsec, gear, wt
FROM mtcars
WHERE gear IN (SELECT n_gear
FROM Gear
WHERE n_gear IN (3,4))"
)
Try something like this:
list<-c("try","this") #The output from your first query
sql_in<-paste0(list, collapse="','")
The Output
paste("select * from table where table.var in ",paste("('",sql_in,"')",sep=''))
[1] "select * from table where table.var in ('try','this')"
If yuo have space as first or last element of the string you can use this code:
`list<-c(" first element is a space","try","this","last element is a space ")` #The output from your first query
Find space at first or last character
first_space<-substr(list, start = 1, stop = 1)==" "
last_space<-substr(list, start = nchar(list), stop = nchar(list))==" "
Remove spaces
list[first_space]<-substr(list[first_space], start = 2, stop = nchar(list[first_space]))
list[last_space]<-substr(list[last_space], start = 1, stop = nchar(list[last_space])-1)
sql_in<-paste0(list, collapse="','")
Your output
paste0("select * from table where table.var in ",paste("('",sql_in,"')",sep=''))
"select * from table where table.var in ('first element is a space','try','this','last element is a space')"
I think You are expecting some thing like shown below code,
data <- dbGetQuery(con, "select column from yourfirsttable")
list <- paste(data$column, collapse="','")
result <- dbGetQuery(con, statement = sprintf("select * from yourresulttable where inv in ('%s')",list))
It's not entirely clear exactly what you're wanting to achieve here. For example, one use case just means you can do it all with a join. But I have cases where I don't know the values for the test without doing some computation. Then I do a separate query having created a query string thus:
> id <- 1:5
> paste0("SELECT * FROM table WHERE ID IN (", paste0(id, collapse = ","), ")")
[1] "SELECT * FROM table WHERE ID IN (1,2,3,4,5)"
Morning All,
Im not to sure how i need to solve my following query... I have the following query which pulls back the desired records in SQL server...
SELECT agenda.AgendaItemNumber,Agenda.AgendaName, AgendaType.AgendaTypeDescription, userdetails.fullName
FROM Agenda
JOIN AgendaType ON AgendaType.AgendaTypeID=Agenda.AgendaTypeID
JOIN UserDetails ON Agenda.AgendaID = Userdetails.AgendaID
WHERE agenda.AgendaTypeID = '2'
AND AgendaItemNumber = AgendaItemNumber
AND AgendaName = AgendaName
AND AgendaTypeDescription = AgendaTypeDescription
AND AgendaItemNumber >= '3'
The above query works but i need to enhance this slightly. It pulls back the following results, which essentially are duplicate records except for the 'fullname' column...
What i would like to do is be able to add some extra code to this query so that when i run the query i am able to display one record for each 'AgendaItemNumber' and for it to concat both of the fullnames for this record. However i have additional AgendaItemsNumbers in this table that only have 1 x user fullname assigned to them. its just these few records within the image file i need to do something clever with.
Maybe there is a better way to complete this task?
Many thanks in advance. Any queries please dont hesitate to ask.
Regards
Betty
SELECT agenda.AgendaItemNumber,
Agenda.AgendaName,
AgendaType.AgendaTypeDescription,
STUFF(( SELECT ';' + FullName
FROM UserDetails
WHERE UserDetails.AgendaID = Agenda.AgendaID
FOR XML PATH('')
), 1, 1, '') AS fullName
FROM Agenda
INNER JOIN AgendaType
ON AgendaType.AgendaTypeID=Agenda.AgendaTypeID
INNER JOIN UserDetails
ON Agenda.AgendaID = Userdetails.AgendaID
WHERE agenda.AgendaTypeID = '2'
AND AgendaItemNumber = AgendaItemNumber
AND AgendaName = AgendaName
AND AgendaTypeDescription = AgendaTypeDescription
AND AgendaItemNumber >= '3'
ADENDUM
The XML extension in SQL-Server allows you to concatenate multiple rows into a single row. The actual intention of the extension is so you can output as XML (obviously), but there are some nifty tricks that are byproducts of the extensions. In the above query, if there were a column name in the subquery (FullName) it would output as <FullName>Joe Bloggs1</FullName><FullName>Joe Bloggs2</FullName>, because there is no column name it simply concatenates the rows (not forming proper XML). The PATH part allows you to specify an additional node, for example if you use PATH('Name') in the above you would get <Name>;Joe Bloggs</Name><Name>;Joe Bloggs2</Name> If you combine Path with a column name you would get Joe Bloggs.
Finally the STUFF just removes the semicolon at the start of the list.