Code is showing an error
Merge statements with a WHEN NOT MATCHED [BY TARGET] clause must target a hash distributed table
Also please verify that the overall syntax is fine or not?
MERGE IR_CREDITREQUEST_SPTESTING AS T
USING (
SELECT
TT.TaxYear
,TT.TaxPayerSSN
,TT.EngagementID
,TT.CreditRequestType
,TT.BorrowerID
,TT.NameSuffix
,TT.FirstName
,TT.MiddleName
,TT.LastName
,TT.SpouseName
,TT.SpouseSSN
,TT.PrintPositionType
,TT.MaritalStatusType
,TT.StreetAddress
,TT.City
,TT.State
,TT.PostalCode
,TT.Type
,TT.Value
,TT.RequestDateTime
,TT.CreatedDateTime
,TT.RequestProcessed
,TT.BorrowerResidencyType
,TT.isActive
FROM
IR_CREDITREQUEST_SPTESTING TT
INNER JOIN (
select DISTINCT
A.TaxYear,
A.[TaxPayer-SSN] AS TaxPayerSSN,
A.EngagementID AS EngagementID,
CASE
WHEN A.[Filing Status] = 'MFJ' THEN 'Joint'
ELSE A.[Filing Status]
END AS [CreditRequestType],
'' AS BorrowerID ,
A.[TaxPayer-Title/Suffix] AS NameSuffix,
A.[TaxPayer-FirstName] AS FirstName,
'' AS MiddleName,
A.[TaxPayer-LastName] AS LastName,
B.[Spouse-FirstName] + ' ' + B.[Spouse-LastName] AS [SpouseName],
B.[Spouse-SSN] AS [SpouseSSN],
CASE
WHEN A.[Filing Status] = 'MFJ' THEN 'CoBorrower'
WHEN A.[Filing Status] = 'Single' THEN 'Borrower'
ELSE A.[Filing Status]
END AS [PrintPositionType],
CASE
WHEN B.[Spouse-FirstName] IS not null THEN 'Married'
ELSE 'Unmarried'
END AS [MaritalStatusType],
C.[Address] AS StreetAddress,
C.City AS City,
C.[State] AS State,
C.[Postal Code] AS PostalCode,
A.[Primary Contact] AS Type,
A.[TaxPayer-Home/Evening Telephone Number] AS Value,
NULL AS RequestDateTime,
GETDATE() AS CreatedDateTime,
NULL AS RequestProcessed,
NULL AS BorrowerResidencyType,
0 AS IsActive
from DimTaxPayerInfo A
LEFT join DimTaxPayerSpouseInfo B on A.[TaxPayer-SSN] = B.[TaxPayer-SSN] AND B.TaxSoftwareId = 4
LEFT join stg.stg_DimTaxPayerAddress C on A.[TaxPayer-SSN] = C.[TaxPayer-SSN]
WHERE A.[TaxPayer-SSN] != ''
) as Y
ON TT.[EngagementID] = Y.[EngagementID]
) DD
ON T.[EngagementID] = DD.[EngagementID]
WHEN MATCHED THEN
Update
SET T.TaxYear = DD.TaxYear
,T.TaxPayerSSN = dd.TaxPayerSSN
,T.EngagementID = dd.EngagementID
,T.CreditRequestType = dd.CreditRequestType
,T.BorrowerID = dd.BorrowerID
,T.NameSuffix = dd.NameSuffix
,T.FirstName = dd.FirstName
,T.MiddleName = dd.MiddleName
,T.LastName = dd.LastName
,T.SpouseName = dd.SpouseName
,T.SpouseSSN = dd.SpouseSSN
,T.PrintPositionType = dd.PrintPositionType
,T.MaritalStatusType = dd.MaritalStatusType
,T.StreetAddress = dd.StreetAddress
,T.City = dd.City
,T.State = dd.State
,T.PostalCode = dd.PostalCode
,T.Type = dd.Type
,T.Value = dd.Value
,T.RequestDateTime = dd.RequestDateTime
,T.CreatedDateTime = dd.CreatedDateTime
,T.RequestProcessed = dd.RequestProcessed
,T.BorrowerResidencyType = dd.BorrowerResidencyType
,T.IsActive = dd.IsActive
WHEN NOT MATCHED THEN
INSERT
( TaxYear
,TaxPayerSSN
,EngagementID
,CreditRequestType
,BorrowerID
,NameSuffix
,FirstName
,MiddleName
,LastName
,SpouseName
,SpouseSSN
,PrintPositionType
,MaritalStatusType
,StreetAddress
,City
,State
,PostalCode
,Type
,Value
,RequestDateTime
,CreatedDateTime
,RequestProcessed
,BorrowerResidencyType
,IsActive
)
values (
dd.TaxYear
,dd.TaxPayerSSN
,dd.EngagementID
,dd.CreditRequestType
,dd.BorrowerID
,dd.NameSuffix
,dd.FirstName
,dd.MiddleName
,dd.LastName
,dd.SpouseName
,dd.SpouseSSN
,dd.PrintPositionType
,dd.MaritalStatusType
,dd.StreetAddress
,dd.City
,dd.State
,dd.PostalCode
,dd.Type
,dd.Value
,dd.RequestDateTime
,dd.CreatedDateTime
,dd.RequestProcessed
,dd.BorrowerResidencyType
,dd.IsActive
);
Your Merge Statement looks correct. This error is mostly seen in Azure Synapse. Make sure your target table is hash distributed to avoid this error.
Refer to the answer posted in the thread for a similar error.
Related
From what I have read about this it seems like the best solution is to create an INDEX but I am not sure which columns I should be creating indexes for. This is my first time working with SQL indexes.
If I remove the DISTINCT call from this query I get over 1000 results in just over a second. However with the DISTINCT call it returns the results in 10 seconds (obviously without the duplicates).
If anyone has any alternative solutions I am all ears.
This is the query (the second SELECT is where the DISTINCT function is called):
SELECT
Sku,
Name,
ccp.Polygon,
MarketAvailability,
Coverage,
Range
FROM
(SELECT DISTINCT
dbo.CatalogEntry.CatalogEntryId as Id,
dbo.CatalogEntry.Code as Sku,
CoverageNode.Name as Coverage,
RangeNode.Name as [Range],
(SELECT CatalogContentProperty.LongString
FROM CatalogContentProperty
WHERE MetaFieldName = 'ItemChartName'
AND (CatalogContentProperty.LongString IS NOT NULL)
AND (CatalogContentProperty.ObjectId = dbo.CatalogEntry.CatalogEntryId)) AS [Name],
(SELECT CatalogContentProperty.LongString
FROM CatalogContentProperty
WHERE MetaFieldName = 'MarketAvailabilityDetailsCollection'
AND (CatalogContentProperty.LongString IS NOT NULL)
AND (CatalogContentProperty.ObjectId = dbo.CatalogEntry.CatalogEntryId)) AS MarketAvailability
FROM
dbo.CatalogEntry
INNER JOIN
dbo.NodeEntryRelation ON dbo.CatalogEntry.CatalogEntryId = dbo.NodeEntryRelation.CatalogEntryId
INNER JOIN
dbo.CatalogNode AS CoverageNode ON dbo.NodeEntryRelation.CatalogNodeId = CoverageNode.CatalogNodeId
INNER JOIN
dbo.CatalogNode AS RangeNode ON CoverageNode.ParentNodeId = RangeNode.CatalogNodeId
INNER JOIN
dbo.CatalogContentProperty ON dbo.CatalogEntry.CatalogEntryId = dbo.CatalogContentProperty.ObjectId
INNER JOIN
dbo.CatalogNode AS ModelNode ON RangeNode.ParentNodeId = ModelNode.CatalogNodeId
INNER JOIN
dbo.CatalogNode AS BrandNode ON ModelNode.ParentNodeId = BrandNode.CatalogNodeId
WHERE
(dbo.CatalogEntry.ClassTypeId = N'Variation') AND
(dbo.CatalogContentProperty.MetaFieldName = N'ItemIsChart') AND
RangeNode.Name != 'C-MAP' AND
(BrandNode.Name = '' OR '' = '' OR '' IS NULL) AND
(ModelNode.Name = '' OR '' = '' OR '' IS NULL) AND
(CoverageNode.Name = '' OR '' = '' OR '' IS NULL) AND
(RangeNode.Name = '' OR '' = '' OR '' IS NULL)
) AS CmapResults
INNER JOIN
(SELECT
GEOMETRY::STGeomFromText(CatalogContentProperty.LongString,4326) AS PolygonGeometry,
CatalogContentProperty.LongString AS Polygon,
CatalogContentProperty.ObjectId
FROM
CatalogContentProperty
WHERE
MetaFieldName = 'ItemChartCoordinates' AND
(CatalogContentProperty.LongString IS NOT NULL)) ccp ON ccp.ObjectId = CmapResults.Id
WHERE
((GEOGRAPHY::STGeomFromText(PolygonGeometry.MakeValid().STUnion(PolygonGeometry.MakeValid().STStartPoint()).STAsText(), 4326).STDistance(GEOGRAPHY::STGeomFromText('POINT(50.9835929 -1.4205852)', 4326)) / 1609.344) <= 100 OR 'POINT(50.9835929 -1.4205852)' IS NULL)
AND MarketAvailability IS NOT NULL
ORDER BY
GEOGRAPHY::STGeomFromText(PolygonGeometry.MakeValid().STUnion(PolygonGeometry.MakeValid().STStartPoint()).STAsText(), 4326).STArea() DESC;
I am using SQL Server Management Studio 2012. The aim is to get the query with the DISTINCT call to return in the same amount of time as the query would without the DISTINCT call.
Your query looks a bit complicated. Will this one produce the same output?
SELECT DISTINCT ce.Code as Sku
, max(case when ccp.MetaFieldName = 'ItemChartName' then ccp.LongString end) as 'Name'
, max(case when ccp.MetaFieldName = 'MarketAvailabilityDetailsCollection' then ccp.LongString end) as 'MarketAvailability'
, max(case when ccp.MetaFieldName = 'ItemChartCoordinates' then ccp.LongString end) as 'Polygon'
, CoverageNode.Name as Coverage
, RangeNode.Name as 'Range'
FROM dbo.CatalogEntry ce
INNER JOIN dbo.NodeEntryRelation ner ON ce.CatalogEntryId = ner.CatalogEntryId
INNER JOIN dbo.CatalogNode CoverageNode ON dbo.NodeEntryRelation.CatalogNodeId = CoverageNode.CatalogNodeId
INNER JOIN dbo.CatalogNode RangeNode ON CoverageNode.ParentNodeId = RangeNode.CatalogNodeId
INNER JOIN dbo.CatalogContentProperty ccp ON ce.CatalogEntryId = ccp.ObjectId
INNER JOIN dbo.CatalogNode ModelNode ON RangeNode.ParentNodeId = ModelNode.CatalogNodeId
INNER JOIN dbo.CatalogNode BrandNode ON ModelNode.ParentNodeId = BrandNode.CatalogNodeId
WHERE ce.ClassTypeId = N'Variation'
and ccp.MetaFieldName = N'ItemIsChart'
and RangeNode.Name != 'C-MAP'
--and (BrandNode.Name = '' OR '' = '' OR '' IS NULL) -- always true
--and (ModelNode.Name = '' OR '' = '' OR '' IS NULL) -- always true
--and (CoverageNode.Name = '' OR '' = '' OR '' IS NULL) -- always true
--and (RangeNode.Name = '' OR '' = '' OR '' IS NULL) -- always true
and (GEOGRAPHY::STGeomFromText(GEOMETRY::STGeomFromText(ccp.LongString,4326).MakeValid().STUnion(GEOMETRY::STGeomFromText(ccp.LongString,4326).MakeValid().STStartPoint()).STAsText(), 4326).STDistance(GEOGRAPHY::STGeomFromText('POINT(50.9835929 -1.4205852)', 4326)) / 1609.344) <= 100 -- OR 'POINT(50.9835929 -1.4205852)' IS NULL -- redundant
)
and max(case when ccp.MetaFieldName = 'MarketAvailabilityDetailsCollection' then ccp.LongString end)
ORDER BY GEOGRAPHY::STGeomFromText(GEOMETRY::STGeomFromText(ccp.LongString,4326).MakeValid().STUnion(GEOMETRY::STGeomFromText(ccp.LongString,4326).MakeValid().STStartPoint()).STAsText(), 4326).STArea() DESC;
So the answer is my case was to remove the DISTINCT and to do the duplicate removing using LINQ! Load times went from 10-11ish seconds to 4-5ish seconds
I'm trying to suppress the repeating values in TotalCarton column. Have tried to replace the value either blank or null but went failed. Any help?
Here is the SQL Script:
SELECT ORDERS.StorerKey,
ORDERS.OrderKey,
PackKey = (SELECT MAX(PackKey) FROM BAX_PACK_DTL WITH (NOLOCK) WHERE ORderKey = ORDERS.OrderKey),
PackHU = BAX_PACK_DTL.OuterPackID,
SalesOrderNum = ( SELECT Upper(Max(ORDERDETAIL.CustShipInst01)) FROM ORDERDETAIL WITH (NOLOCK) WHERE OrderKey = ORDERS.OrderKey),
DeliveryNum = Upper(ORDERS.ExternOrderKey),
TotalCarton = ( CASE BAX_PACK_DTL.PackType WHEN 'C' THEN Count(DISTINCT(BAX_PACK_DTL.OuterPackID))
ELSE 0 END ),
TotalPallet = ( CASE BAX_PACK_DTL.PackType WHEN 'P' THEN Count(DISTINCT(BAX_PACK_DTL.OuterPackID))
ELSE 0 END ),
SumCarton = (SELECT COUNT(DISTINCT(OuterPackSeq)) FROM BAX_PACK_DTL WITH (NOLOCK) WHERE PackType = 'C' AND PackKey = '0000000211'),
SumPallet = (SELECT COUNT(DISTINCT(OuterPackSeq)) FROM BAX_PACK_DTL WITH (NOLOCK) WHERE PackType = 'P' AND PackKey = '0000000211'),
AddWho = Upper(ORDERS.EditWho),
ORDERS.AddDate
FROM ORDERS WITH (NOLOCK) INNER JOIN ORDERDETAIL WITH (NOLOCK) ON ORDERS.StorerKey = ORDERDETAIL.StorerKey
AND ORDERS.OrderKey = ORDERDETAIL.OrderKey
INNER JOIN PICKDETAIL WITH (NOLOCK) ON ORDERDETAIL.StorerKey = PICKDETAIL.StorerKey
AND ORDERDETAIL.OrderKey = PICKDETAIL.OrderKey
AND ORDERDETAIL.OrderLineNumber = PICKDETAIL.OrderLineNumber
INNER JOIN BAX_PACK_DTL WITH (NOLOCK) ON PICKDETAIL.OrderKey = BAX_PACK_DTL.OrderKey
AND PICKDETAIL.PickDetailKey = BAX_PACK_DTL.PickDetailKey
WHERE (SELECT COUNT(DISTINCT(ORDERKEY)) FROM PICKDETAIL WITH (NOLOCK) WHERE OrderKey = ORDERS.OrderKey ) > 0
AND BAX_PACK_DTL.PackKey = '0000000211'
AND BAX_PACK_DTL.OuterPackID IN
('P111111111',
'P22222222',
'P33333333')
GROUP BY ORDERS.StorerKey,
ORDERS.OrderKey,
ORDERS.ExternOrderKey,
ORDERS.HAWB,
ORDERS.SO,
ORDERS.EditWho,
ORDERS.AddDate,
PICKDETAIL.WaveKey,
BAX_PACK_DTL.OuterPackID,
BAX_PACK_DTL.PackKey,
BAX_PACK_DTL.PackType
ORDER BY BAX_PACK_DTL.OuterPackID ASC
Below is the current result set based on the query above.
Your code looks really strange. I would expect the query to use conditional aggregation and look more like this:
SELECT ORDERS.StorerKey, ORDERS.OrderKey,
PackKey = (SELECT MAX(PackKey) FROM BAX_PACK_DTL WITH (NOLOCK) WHERE ORderKey = ORDERS.OrderKey),
PackHU = BAX_PACK_DTL.OuterPackID,
SalesOrderNum = ( SELECT Upper(Max(ORDERDETAIL.CustShipInst01)) FROM ORDERDETAIL WITH (NOLOCK) WHERE OrderKey = ORDERS.OrderKey),
DeliveryNum = Upper(ORDERS.ExternOrderKey),
TotalCarton = COUNT(DISTINCT CASE BAX_PACK_DTL.PackType WHEN 'C' THEN BAX_PACK_DTL.OuterPackID END),
TotalPallet = COUNT(DISTINCT CASE BAX_PACK_DTL.PackType WHEN 'P' THEN BAX_PACK_DTL.OuterPackID END),
SumCarton = (SELECT COUNT(DISTINCT(OuterPackSeq)) FROM BAX_PACK_DTL bpd WHERE pbd.PackType = 'C' AND pbd.PackKey = '0000000211'),
SumPallet = (SELECT COUNT(DISTINCT(OuterPackSeq)) FROM BAX_PACK_DTL bpd WHERE pbd.PackType = 'P' AND pbd.PackKey = '0000000211'),
AddWho = Upper(ORDERS.EditWho),
ORDERS.AddDate
FROM . . .
GROUP BY ORDERS.StorerKey, ORDERS.OrderKey, Upper(ORDERS.ExternOrderKey),
Upper(ORDERS.EditWho), ORDERS.AddDate;
This may not be exact. You have not qualified column names, given the table structure, and are using very arcane query syntax, mixing subqueries and aggregations. But it should give an idea.
I am trying to run the following query,
DECLARE #p_UserName as nvarchar(100)
DECLARE #p_Department as int
DECLARE #p_Section as int
DECLARE #p_SubSection as int
DECLARE #p_PermissionGroup as int
DECLARE #p_DistributionGroup as int
DECLARE #p_Permission as nvarchar(100)
DECLARE #p_IfPerChecked as bit
DECLARE #p_Role as int
SET #p_UserName = ''
SET #p_Department = NULL
SET #p_Section = NULL
SET #p_SubSection = NULL
SET #p_PermissionGroup = NULL
SET #p_DistributionGroup = NULL
SET #p_Permission = ''
SET #p_Role = NULL
SELECT Users.EnglishName,
(SELECT Designation.TitleEnglish FROM Designation WHERE Users.Designation = Designation.ID) AS [Role],
(SELECT Department.TitleEnglish FROM Department WHERE Users.DepartmentID = Department.ID) AS [Department],
(SELECT Section.TitleEnglish FROM Section WHERE Users.SectionID = Section.SectionID) AS [Section],
(SELECT SubSection.TitleEnglish FROM SubSection WHERE Users.SubSectionID = SubSection.SubSectionID) AS [Sub-Section],
(SELECT Groups.TitleEnglish FROM Groups WHERE
(SELECT UserRights.GroupID FROM UserRights WHERE Users.UserID = UserRights.UserID) = Groups.GroupID
AND Groups.IsDistribution = 0
) AS [Permissions Group],
(SELECT Groups.TitleEnglish FROM Groups WHERE
(SELECT UserRights.GroupID FROM UserRights WHERE Users.UserID = UserRights.UserID) = Groups.GroupID
AND Groups.IsDistribution = 1
) AS [Distribution Group],
(CASE
WHEN Users.ApplyUserRights = 1 THEN dbo.fn_GetUserPermissions('Users', Users.UserID)
WHEN Users.ApplyUserRights = 0 THEN dbo.fn_GetUserPermissions('Groups', (SELECT GroupID FROM UserRights WHERE Users.UserID = UserRights.UserID))
END) AS [Permissions]
FROM Users WHERE
((#p_UserName <> NULL OR #p_UserName <> '') AND #p_UserName = Users.UserName) OR
((#p_Department <> NULL OR #p_Department <> 0) AND #p_Department = Users.DepartmentID) OR
((#p_Section <> NULL OR #p_Section <> 0) AND #p_Section = Users.SectionID) OR
((#p_SubSection <> NULL OR #p_SubSection <> 0) AND #p_SubSection = Users.SubSectionID) OR
((#p_PermissionGroup <> NULL OR #p_PermissionGroup <> 0) AND #p_PermissionGroup = (
SELECT Groups.GroupID FROM Groups WHERE
(SELECT UserRights.GroupID FROM UserRights WHERE Users.UserID = UserRights.UserID) = Groups.GroupID
AND Groups.IsDistribution = 0
)) OR
((#p_DistributionGroup <> NULL OR #p_DistributionGroup <> 0) AND #p_DistributionGroup = (
SELECT Groups.GroupID FROM Groups WHERE
(SELECT UserRights.GroupID FROM UserRights WHERE Users.UserID = UserRights.UserID) = Groups.GroupID
AND Groups.IsDistribution = 1
)) OR
(1 = CASE
WHEN Users.ApplyUserRights = 1 AND #p_Permission = 'AllowChangePassword' THEN 0
ELSE dbo.fn_CheckPemission(#p_Permission, UserID)
END) OR
((#p_Role <> NULL OR #p_Role <> 0) AND #p_Role = Users.Designation) OR
(1 = 1)
GROUP BY CASE #GroupBy
WHEN 'DepartmentID' THEN Users.DepartmentID
WHEN 'SectionID' THEN Users.SectionID
WHEN 'SubSectionID' THEN Users.SubSectionID
ELSE Users.EnglishName
END
And I keep getting the error
Column 'Users.EnglishName' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause.
Please help!
Like the message states, you need to group by the EnglishName column unless it is used in an aggregate function(Max or sum or likewise).
The issue is evident from your error message. Use GROUP BY in case of aggregate functions.
I have a partition-by function in my stored procedure which calls for a temporary table from a previous partition-by function. The table that I created with the previous partition by function is #tempVehicleManifestRow which in turn is what I call for the next partition by function. What happens is that it shoes the error
"incorrect syntax near ' #tempVehicleManifestRow'"
Why is this happening? Isn't it that I have already generated a temporary table with the data needed even before I actually selected it?
I have attached below the partition by functions I used.
This is my first partition by function:
;WITH A AS
(
SELECT ROW_NUMBER() OVER(ORDER BY
CASE
when #pOrderby = 'SortByGender' then T.Gender
when #pOrderby = 'SortByCost' then T.colCostCenterCodeVarchar
when #pOrderby = 'SortByPickupDate' then cast(T.colPickUpDate as varchar(20))
when #pOrderby = 'SortByLastName' then T.LastName
when #pOrderby = 'SortByFirstName' then T.FirstName
when #pOrderby = 'SortByEmployeeID' then cast(T.colSeafarerIdInt as varchar(20))
when #pOrderby = 'SortByShip' then T.VesselName
when #pOrderby = 'SortByTitle' then T.RankName
when #pOrderby = 'SortByRouteFrom' then T.RouteFrom
when #pOrderby = 'SortByRouteTo' then T.RouteTo
when #pOrderby = 'SortByFromCity' then T.colFromVarchar
when #pOrderby = 'SortByToCity' then T.colToVarchar
when #pOrderby = 'SortByVehicleTypeName' then T.VehicleTypeName
when #pOrderby = 'SortByStatus' then T.VehicleTypeName
when #pOrderby = 'SortByCostCenter' then T.colCostCenterCodeVarchar
when #pOrderby = 'SortByNationality' then T.Nationality
when #pOrderby = 'SortByVehicleVendor' then T.VehicleVendorname
when #pOrderby = 'SortByRecordLocator' then T.colRecordLocatorVarchar
when #pOrderby = 'SortByOnOffdate' then cast(T.colOnOffDate as varchar(20))
when #pOrderby = 'SortByPickupTime' then cast(T.colPickUpTime as varchar(20))
when #pOrderby = 'SortByOnOff' then T.colSFStatus
when #pOrderby = 'SortByHotel' then T.HotelVendorName
ELSE
T. VehicleVendorname
END ,
CASE WHEN #pOrderby = 'SortByPickupDate' then cast(T.colPickUpTime as varchar(20))
ELSE T.FirstName
END
) AS xRow,
* FROM #tempVehicleManifest T
) SELECT * INTO #tempVehicleManifestRow FROM A ORDER BY A.xRow
This is the partition-by that is are having problems:
;WITH CC AS
(
SELECT ROW_NUMBER() OVER(PARTITION BY CC.colRecordLocatorVarchar, CC.colSeafarerIdInt,
CC.colOnOffVarchar , CC.colVehicleVendorIDInt
ORDER BY CC.colTagIDInt DESC) xRow, CC.*
FROM (
SELECT distinct
A.xRow,
A.colTransVehicleIDBigint,
A.colSeafarerIdInt, A.LastName, A.FirstName,
A.colIdBigint, A.colTravelReqIDInt,
A.colRecordLocatorVarchar, A.colOnOffDate,
A.colRequestIDInt, A.colVehicleVendorIDInt,
A.VehicleVendorname, A.colVehiclePlateNoVarchar,
A.colPickUpDate, A.colPickUpTime,
A.colDropOffDate, A.colDropOffTime,
A.colConfirmationNoVarchar, A.colVehicleStatusVarchar,
A.colVehicleTypeIdInt, A.VehicleTypeName, A.colSFStatus,
A.colRouteIDFromInt, A.RouteFrom, A.colRouteIDToInt, A.RouteTo,
A.colFromVarchar, A.colToVarchar, A.colRemarksForAuditVarchar,
A.colHotelIDInt, A.HotelVendorName, A.colRankIDInt, A.RankName,
A.colCostCenterIDInt, A.colCostCenterCodeVarchar,
Nationality = RTRIM(LTRIM(N.colNationalityCodeVarchar)) + '-' + RTRIM(LTRIM(N.colNationalityDescriptionVarchar)),
A.colIsVisibleBit,
A.colContractIdInt, A.Gender, A.colVesselIdInt,
A.VesselName, UserID = #pUserID, A.colSeqNoInt
, A.colDriverIDInt
--, A.colIsNoVehicleNeeded
, A.colVehicleDispatchTime
, FlightNo =A.colFlightNoVarchar
, Carrier = A.colMarketingAirlineCodeVarchar
, Departure = A.colDepartureAirportLocationCodeVarchar
, Arrival = A.colArrivalAirportLocationCodeVarchar
, DeptDate = A.colDepartureDateTime
, ArrDate = A.colArrivalDateTime
, PA.PassportNo
, PA.PassportExp
, PA.PassportIssued
, BR.Birthday
, ISNULL(CC.colIsActiveBit,0) as colIsActiveBitTagged
, CC.colCreatedByVarchar as createdUserTag
, CC.colModifiedByVarchar as modifiedUserTag
, CC.colVehicleVendorIDInt as taggedVehicleVendorId
#tempVehicleManifestRow A
LEFT JOIN TblVehicleManifestConfirmed B ON
A.colSeafarerIdInt = B.colSeafarerIdInt AND
A.colVehicleVendorIDInt = B.colVehicleVendorIDInt AND
A.colPickUpDate = B.colPickUpDate AND
ISNULL(A.colRecordLocatorVarchar,'') = ISNULL(B.colRecordLocatorVarchar,'')
AND A.colRouteIDFromInt = B.colRouteIDFromInt
AND A.colRouteIDToInt = B.colRouteIDToInt
--not visible to vendor but not realy cancelled
LEFT JOIN TblVehicleManifestConfirmed Hide ON
A.colSeafarerIdInt = Hide.colSeafarerIdInt AND
A.colVehicleVendorIDInt = Hide.colVehicleVendorIDInt AND
A.colPickUpDate = Hide.colPickUpDate AND
ISNULL(A.colRecordLocatorVarchar,'') = ISNULL(Hide.colRecordLocatorVarchar,'') AND
ISNULL(Hide.colIsVisibleBit,1) = 0
AND A.colRouteIDFromInt = B.colRouteIDFromInt
AND A.colRouteIDToInt = B.colRouteIDToInt
--added new table
LEFT JOIN TblTag_Vehicle CC ON B.colIdBigint = CC.colIdBigint AND
B.colTravelReqIDInt = CC.colTravelReqIDInt AND B.colSeafarerIdInt = CC.colSeafarerIdInt
--end new added table
LEFT JOIN dbo.TblVehiclePlates VP ON VP.colPlateID = B.colVehiclePlateNoVarchar
LEFT JOIN dbo.TblSeafarer S ON S.colSeafarerIdInt = A.colSeafarerIdInt
LEFT JOIN TblNationality N ON N.colNatioalityIdInt = S.colNationalityIDInt
LEFT JOIN #TempPassport PA ON A.colSeafarerIdInt = PA.SeafarerId
LEFT JOIN tmRemarks_Birthday BR ON BR.FK_ItineraryRefID = A.colRecordLocatorVarchar
JOIN #tempVehicleVendor VE ON VE.colVehicleVendorIDInt = A.colVehicleVendorIDInt
WHERE
( B.colConfirmedManifestIDBigint IS NULL
OR
Hide.colTransVehicleIDBigint IS NOT NULL
)
ORDER BY A.xRow
)
) SELECT * INTO #tempManifestNew
You have missed the FROM CLAUSE in this query near #tempVehicleManifestRow A. Here is the correct query.
;WITH CC
AS (
SELECT ROW_NUMBER() OVER (
PARTITION BY CC.colRecordLocatorVarchar
,CC.colSeafarerIdInt
,CC.colOnOffVarchar
,CC.colVehicleVendorIDInt ORDER BY CC.colTagIDInt DESC
) xRow
,CC.*
FROM (
SELECT DISTINCT A.xRow
,A.colTransVehicleIDBigint
,A.colSeafarerIdInt
,A.LastName
,A.FirstName
,A.colIdBigint
,A.colTravelReqIDInt
,A.colRecordLocatorVarchar
,A.colOnOffDate
,A.colRequestIDInt
,A.colVehicleVendorIDInt
,A.VehicleVendorname
,A.colVehiclePlateNoVarchar
,A.colPickUpDate
,A.colPickUpTime
,A.colDropOffDate
,A.colDropOffTime
,A.colConfirmationNoVarchar
,A.colVehicleStatusVarchar
,A.colVehicleTypeIdInt
,A.VehicleTypeName
,A.colSFStatus
,A.colRouteIDFromInt
,A.RouteFrom
,A.colRouteIDToInt
,A.RouteTo
,A.colFromVarchar
,A.colToVarchar
,A.colRemarksForAuditVarchar
,A.colHotelIDInt
,A.HotelVendorName
,A.colRankIDInt
,A.RankName
,A.colCostCenterIDInt
,A.colCostCenterCodeVarchar
,Nationality = RTRIM(LTRIM(N.colNationalityCodeVarchar)) + '-' + RTRIM(LTRIM(N.colNationalityDescriptionVarchar))
,A.colIsVisibleBit
,A.colContractIdInt
,A.Gender
,A.colVesselIdInt
,A.VesselName
,UserID = #pUserID
,A.colSeqNoInt
,A.colDriverIDInt
--, A.colIsNoVehicleNeeded
,A.colVehicleDispatchTime
,FlightNo = A.colFlightNoVarchar
,Carrier = A.colMarketingAirlineCodeVarchar
,Departure = A.colDepartureAirportLocationCodeVarchar
,Arrival = A.colArrivalAirportLocationCodeVarchar
,DeptDate = A.colDepartureDateTime
,ArrDate = A.colArrivalDateTime
,PA.PassportNo
,PA.PassportExp
,PA.PassportIssued
,BR.Birthday
,ISNULL(CC.colIsActiveBit, 0) AS colIsActiveBitTagged
,CC.colCreatedByVarchar AS createdUserTag
,CC.colModifiedByVarchar AS modifiedUserTag
,CC.colVehicleVendorIDInt AS taggedVehicleVendorId
-- HERE YOU HAVE MISSED FROM CLAUSE
FROM #tempVehicleManifestRow A
LEFT JOIN TblVehicleManifestConfirmed B ON A.colSeafarerIdInt = B.colSeafarerIdInt
AND A.colVehicleVendorIDInt = B.colVehicleVendorIDInt
AND A.colPickUpDate = B.colPickUpDate
AND ISNULL(A.colRecordLocatorVarchar, '') = ISNULL(B.colRecordLocatorVarchar, '')
AND A.colRouteIDFromInt = B.colRouteIDFromInt
AND A.colRouteIDToInt = B.colRouteIDToInt
--not visible to vendor but not realy cancelled
LEFT JOIN TblVehicleManifestConfirmed Hide ON A.colSeafarerIdInt = Hide.colSeafarerIdInt
AND A.colVehicleVendorIDInt = Hide.colVehicleVendorIDInt
AND A.colPickUpDate = Hide.colPickUpDate
AND ISNULL(A.colRecordLocatorVarchar, '') = ISNULL(Hide.colRecordLocatorVarchar, '')
AND ISNULL(Hide.colIsVisibleBit, 1) = 0
AND A.colRouteIDFromInt = B.colRouteIDFromInt
AND A.colRouteIDToInt = B.colRouteIDToInt
--added new table
LEFT JOIN TblTag_Vehicle CC ON B.colIdBigint = CC.colIdBigint
AND B.colTravelReqIDInt = CC.colTravelReqIDInt
AND B.colSeafarerIdInt = CC.colSeafarerIdInt
--end new added table
LEFT JOIN dbo.TblVehiclePlates VP ON VP.colPlateID = B.colVehiclePlateNoVarchar
LEFT JOIN dbo.TblSeafarer S ON S.colSeafarerIdInt = A.colSeafarerIdInt
LEFT JOIN TblNationality N ON N.colNatioalityIdInt = S.colNationalityIDInt
LEFT JOIN #TempPassport PA ON A.colSeafarerIdInt = PA.SeafarerId
LEFT JOIN tmRemarks_Birthday BR ON BR.FK_ItineraryRefID = A.colRecordLocatorVarchar
JOIN #tempVehicleVendor VE ON VE.colVehicleVendorIDInt = A.colVehicleVendorIDInt
WHERE (
B.colConfirmedManifestIDBigint IS NULL
OR Hide.colTransVehicleIDBigint IS NOT NULL
)
) AS x -- missing alias declaration, required in TSQL
)
SELECT *
INTO #tempManifestNew
I would like to be able to select the column pa.NumberOfPages from dm_package pa in the following select statement. How can I do this?
Select statement 1
SELECT
Case When IsPackage = 1 then 'DM, Package' else 'DM' end as FaxType,
FaxId, RequestDate, FaxedTo, FaxNumber, Status, ExtendedStatus, StatusDate,
UserName, IsPackage, DocumentId, -1 as PatientMedicationId, '' as Event,
'-1' as NCPDPID, 0 as IsEPerscription, -1 as AccessionNumber,
Case When IsPackage = 0 then
(Select FilePath from PatientDocument where DocumentId = fl.DocumentId and ( '443' = -1 or '443' = PatientId ))
else (Select FilePath from dm_Package where fl.DocumentId = PackageId and ( '443' = -1 or '443' = PatientId )) End as Path,
Case When IsPackage = 0 then
(Select LastFirstName from Patient p, PatientDocument pd where fl.DocumentId = pd.DocumentId and pd.PatientId = p.PatientId)
else (select LastFirstName from Patient p, dm_Package pa where fl.DocumentId = pa.PackageId and pa.PatientId = p.PatientId) END as LastFirstName,
Case When IsPackage = 0 then
(select [Description] from PatientDocument where fl.DocumentId = DocumentId and ( '443' = -1 or '443' = PatientId ))
else (select PackageName from dm_Package where fl.DocumentId = PackageId and ( '443' = -1 or '443' = PatientId )) End as [Description],
'' as JobId, -1 as SeqNumber, '' as RefNumber, (select DocId from dbo.PatientDocument pd where fl.DocumentId = pd.DocumentId) as DocId
FROM dbo.dm_FaxLog fl
Table name dm_package pa
pa.IsFax, pa.FaxName, pa.faxNumber, pa.FilePath, pa.DocRoot, pa.Note, pa.PatientId,
isnull(fl.ExtendedStatus,'') as FaxExtendedStatus, StatusDate as FaxStatusDate, pa.DocId, pa.NumberOfPages
Are you familiar with how to join tables in SQL?
http://technet.microsoft.com/en-us/library/ms191517(v=sql.105).aspx
select a.data1, b.data2
from a_table a
join b_table b on a.data3 = b.data3
I assume FaxNumber in dm_FaxLog and dm_package are same. Then you can do -
SELECT f1.faxNumber, pa.NumberOfPages --list other required columns
FROM dm_FaxLog fl
INNER JOIN dm_package pa ON pa.faxNumber = f1.faxNumber