I am trying to add a Switch between a Transform and a Select But this throw the following error.
Multi-level GROUP BY clause not allowed in subquery
Below is a sample of my SQL Query
TRANSFORM SUM(Rate*
SWITCH(Name = 'Name1',(SELECT sum(MktValue)/(select sum(MktValue) FROM Table2 WHERE Portefeuille IN ( 'Name1' , 'Name2') AND LaDate = #27/10/2021#) FROM Table2 WHERE Name IN ( 'Name1') AND LaDate = #27/10/2021#),Name = 'Name2',0.75,true,0)
SELECT Sector
FROM Table1
WHERE Name IN ( 'Name1' , 'Name2') AND LaDate = #27/10/2021#"
GROUP BY Sector
Pivot Name
What am I doing wrong ?
Please note that Switch() is used to calculate factor. ( MktValue / Sum(AllMktValue))
The below query works
TRANSFORM SUM(Rate * 0.33)
SELECT Sector
FROM Table1
WHERE Name IN ( 'Name1' , 'Name2') AND LaDate = #27/10/2021#"
GROUP BY Sector
Pivot Name
Since the above query is working fine I assume my issue come from the SWITCH
Try with:
TRANSFORM SUM(Rate * SWITCH(
Name = 'Name1',
(SELECT Sum(MktValue) FROM Table2 WHERE Name IN ('Name1') AND LaDate = #2021/10/27#) /
(SELECT Sum(MktValue) FROM Table2 WHERE Portefeuille IN ('Name1','Name2') AND LaDate = #2021/10/27#),
Name = 'Name2', 0.75,
True, 0)
Related
Why below sql statement keeps getting missing FROM clause entry for table error?
How to adjust this?
WITH SUBID AS (
SELECT * FROM "B_COLLECTION"."COLL_C_RECORD"
),
TR AS (
SELECT * FROM "B_TRACE"."PERSONAL_TC_RECORD"
)
SELECT "SUBJECT_C_ID"
FROM "B_COLLECTION"."COLL_C_RECORD"
WHERE ( SUBID.SUBJECT_ID = TR.PERSONAL_S_ID )
AND ( TR.STATE_ID ='5' OR TR.STATE_ID = 'A' OR TR.STATE_ID = 'C');
You are declaring SUBID and TR just fine, but since these are tables, your select statement does not know them yet.
Here you need to enter SUBID and TR in FROM clauses of your query. It should look somewhat like
WITH SUBID AS (
SELECT * FROM "B_COLLECTION"."COLL_C_RECORD"
) ,
TR AS (
SELECT * FROM "B_TRACE"."PERSONAL_TC_RECORD"
)
SELECT "SUBJECT_C_ID" FROM SUBID
WHERE SUBID."SUBJECT_ID" IN
(SELECT "PERSONAL_S_ID" FROM TR
WHERE TR."STATE_ID" = '5'
OR TR."STATE_ID" = 'A'
OR TR."STATE_ID" = 'C');
That is why you use WITH Clause only on repeating queries. Here it would actually be much nicier to use:
SELECT "SUBJECT_ID" FROM "B_COLLECTION"."COLL_C_RECORD" SUBID
WHERE SUBID."SUBJECT_ID" IN
(SELECT "PERSONAL_S_ID" FROM "B_TRACE"."PERSONAL_TC_RECORD" TR
WHERE TR."STATE_ID" = '5'
OR TR."STATE_ID" = 'A'
OR TR."STATE_ID" = 'C');
My expected result should be like
----invoiceNo----
T17080003,INV14080011
But right now, I've come up with following query.
SELECT AccountDoc.jobCode,AccountDoc.shipmentSyskey,AccountDoc.docType,
CASE AccountDoc.docType
WHEN 'M' THEN
JobInvoice.invoiceNo
WHEN 'I' THEN
(STUFF((SELECT ', ' + RTRIM(CAST(AccountDoc.docNo AS VARCHAR(20)))
FROM AccountDoc LEFT OUTER JOIN JobInvoice
ON AccountDoc.principalCode = JobInvoice.principalCode AND
AccountDoc.jobCode = JobInvoice.jobCode
WHERE (AccountDoc.isCancelledByCN = 0)
AND (AccountDoc.docType = 'I')
AND (AccountDoc.jobCode = #jobCode)
AND (AccountDoc.shipmentSyskey = #shipmentSyskey)
AND (AccountDoc.principalCode = #principalCode) FOR XML
PATH(''), TYPE).value('.','NVARCHAR(MAX)'),1,2,' '))
END AS invoiceNo
FROM AccountDoc LEFT OUTER JOIN JobInvoice
ON JobInvoice.principalCode = AccountDoc.principalCode AND
JobInvoice.jobCode = AccountDoc.jobCode
WHERE (AccountDoc.jobCode = #jobCode)
AND (AccountDoc.isCancelledByCN = 0)
AND (AccountDoc.shipmentSyskey = #shipmentSyskey)
AND (AccountDoc.principalCode = #principalCode)
OUTPUT:
----invoiceNo----
T17080003
INV14080011
Explanation:
I want to select docNo from table AccountDoc if AccountDoc.docType = I.
Or select invoiceNo from table JobInvoice if AccountDoc.docType = M.
The problem is what if under same jobCode there have 2 docType which are M and I, how I gonna display these 2 invoices?
You can achieve this by using CTE and FOR XML. below is the sample code i created using similar tables you have -
Create table #AccountDoc (
id int ,
docType char(1),
docNo varchar(10)
)
Create table #JobInvoice (
id int ,
invoiceNo varchar(10)
)
insert into #AccountDoc
select 1 , 'M' ,'M1234'
union all select 2 , 'M' ,'M2345'
union all select 3 , 'M' ,'M3456'
union all select 4 , 'I' ,'I1234'
union all select 5 , 'I' ,'I2345'
union all select 6 , 'I' ,'I3456'
insert into #JobInvoice
select 1 , 'INV1234'
union all select 2 , 'INV2345'
union all select 3 , 'INV3456'
select *
from #AccountDoc t1 left join #JobInvoice t2
on t1.id = t2.id
with cte as
(
select isnull( case t1.docType WHEN 'M' THEN t2.invoiceNo WHEN 'I' then
t1.docNo end ,'') invoiceNo
from #AccountDoc t1 left join #JobInvoice t2
on t1.id = t2.id )
select invoiceNo + ',' from cte For XML PATH ('')
You need to pivot your data if you have situations where there are two rows, and you want two columns. Your sql is a bit messy, particularly the bit where you put an entire select statement inside a case when in the select part of another query. These two queries are virtually the same, you should look for a more optimal way of writing them. However, you can wrap your entire sql in the following:
select
Jobcode, shipmentsyskey, [M],[I]
from(
--YOUR ENTIRE SQL GOES HERE BETWEEN THESE BRACKETS. Do not alter anything else, just paste your entire sql here
) yoursql
pivot(
max(invoiceno)
for docType in([M],[I])
)pvt
I'm trying to pull 6 records using the code below but there are some cases where the information is updated and therefore it is pulling duplicate records.
My code:
SELECT column2, count(*) as 'Count'
FROM ServiceTable p
join HIERARCHY h
on p.LOCATION_CODE = h.LOCATION
where Report_date between '2017-04-01' and '2017-04-30'
and Column1 = 'Issue '
and LOCATION = '8789'
and
( record_code = 'INCIDENT' or
(
SUBMIT_METHOD = 'Web' and
not exists
(
select *
from ServiceTable p2
where p2.record_code = 'INCIDENT'
and p2.incident_id = p.incident_id
)
)
)
The problem is that instead of the six records it is pulling eight. I would just use distinct * but the file_date is different on the duplicate entries:
FILE_DATE Incident_ID Column1 Column2
4/4/17 123 Issue Service - Red
4/4/17 123 Issue Service - Blue
4/5/17 123 Issue Service - Red
4/5/17 123 Issue Service - Blue
The desired output is:
COLUMN2 COUNT
Service - Red 1
Service - Blue 1
Any help would be greatly appreciated! If you need any other info just let me know.
If you turn your original select statement without the aggregation function into a subquery, you can distinct that on your values that are not the changing date, then select a COUNT from there. Don't forget your GROUP BY clause at the end.
SELECT Column2, COUNT(Incident_ID) AS Service_Count
FROM (SELECT DISTINCT Incident_ID, Column1, Column2
FROM ServiceTable p
JOIN HIERARCHY h ON p.LOCATION_CODE = h.LOCATION
WHERE Report_date BETWEEN '2017-04-01' AND '2017-04-30'
AND Column1 = 'Issue '
AND LOCATION = '8789'
AND
( record_code = 'INCIDENT' or
(
SUBMIT_METHOD = 'Web' and
NOT EXISTS
(
SELECT *
FROM ServiceTable p2
WHERE p2.record_code = 'INCIDENT'
AND p2.incident_id = p.incident_id)
)
)
)
GROUP BY Column2
Also, if you are joining tables it is a good practice to fully qualify the field you are selecting. Example: p.Column2, p.Incident_ID, h.LOCATION. That way, even your distinct fields are easier to follow where they came from and how they relate.
Finally, don't forget that COUNT is a reserved word. I modified your alias accordingly.
If you are using an aggregation function (count), you should use group by for the column not in the aggregation function:
SELECT column2, count(*) as 'Count'
FROM ServiceTable p
join HIERARCHY h
on p.LOCATION_CODE = h.LOCATION
where Report_date between '2017-04-01' and '2017-04-30'
and Column1 = 'Issue '
and LOCATION = '8789'
and
( record_code = 'INCIDENT' or
(
SUBMIT_METHOD = 'Web' and
not exists
(
select *
from ServiceTable p2
where p2.record_code = 'INCIDENT'
and p2.incident_id = p.incident_id
)
)
)
group by column2
Hi I need the result of this. so if a entityID matches to a value I need the sum of certain column.I am getting an expression missing error. Can someone point me to where the error is?
Thanks.
SELECT
p.jobTitle,
p.department,
p.person,
ufr.meets,
ufr.exceeds,
CASE
WHEN ufr.entityid = 'AHT' THEN (AD.acdcalls + AD.daacdcalls)
WHEN ufr.entityid = 'ACW' THEN (AD.acdcalls + AD.daacdcalls)
WHEN ufr.entityid = 'Adherence' THEN SUM(AA.totalSched)
WHEN ufr.entityid = 'Conformance' THEN SUM(AS.minutes)
ELSE null
END as weight,
(weight * meets) AS weightedMeets,
(weight * exceeds) AS weightedExceeds
FROM M_PERSON p
JOIN A_TMP5408_UNFLTRDRESULTSAG ufr
ON ufr.department = p.department AND ufr.jobTitle = p.jobTitle
LEFT JOIN M_AvayaDAgentChunk AD
ON AD.person = p.person and ufr.split = AD.split
LEFT JOIN M_AgentAdherenceChunk AA
ON AA.person = p.person
LEFT JOIN M_AgentScheduleChunk AS
ON AS.person = p.person
GROUP BY
p.person,
p.department,
p.jobTitle,
ufr.meets,
ufr.exceeds,
weight,
weightedMeets,
weightedExceeds
As well as the issues mentioned by #GordonLinoff (that AS is a keyword) and #DCookie (you need entityid in the group-by):
you also need acdcalls and daacdcalls in the group-by (unless you can aggregate those);
you can't refer to a column alias in the same level of query, so (weight * meets) AS weightedMeets isn't allowed - you've just define what weight is, in the same select list. You need to use an inline view, or a CTE, if you don't want to repeat the case logic.
I think this does what you want:
SELECT
jobTitle,
department,
person,
meets,
exceeds,
weight,
(weight * meets) AS weightedMeets,
(weight * exceeds) AS weightedExceeds
FROM
(
SELECT
MP.jobTitle,
MP.department,
MP.person,
ufr.meets,
ufr.exceeds,
CASE
WHEN ufr.entityid = 'AHT' THEN (MADAC.acdcalls + MADAC.daacdcalls)
WHEN ufr.entityid = 'ACW' THEN (MADAC.acdcalls + MADAC.daacdcalls)
WHEN ufr.entityid = 'Adherence' THEN SUM(MAAC.totalSched)
WHEN ufr.entityid = 'Conformance' THEN SUM(MASC.minutes)
ELSE null
END as weight
FROM M_PERSON MP
JOIN A_TMP5408_UNFLTRDRESULTSAG ufr
ON ufr.department = MP.department AND ufr.jobTitle = MP.jobTitle
LEFT JOIN M_AvayaDAgentChunk MADAC
ON MADAC.person = MP.person and ufr.split = MADAC.split
LEFT JOIN M_AgentAdherenceChunk MAAC
ON MAAC.person = MP.person
LEFT JOIN M_AgentScheduleChunk MASC
ON MASC.person = MP.person
GROUP BY
MP.person,
MP.department,
MP.jobTitle,
ufr.meets,
ufr.exceeds,
ufr.entityid,
MADAC.acdcalls,
MADAC.daacdcalls
);
Your fist two case branches could be combined since the calculation is the same, but will work either way.
In addition to the alias issue identified by Gordon, I think you'll find you need to use an aggregate function in all the THEN clauses of your CASE statement, and that you need to GROUP BY ufr.entityid as well. Otherwise you'll start getting ora-00979 errors (not a GROUP BY expression). If you don't want the aggregate function in all clauses, then you'll have to group by the expressions you're summing as well.
Small illustration:
CREATE TABLE tt (ID varchar2(32), sub_id varchar2(32), x NUMBER, y NUMBER);
INSERT INTO tt VALUES ('ID1', 'A', 1, 6);
INSERT INTO tt VALUES ('ID1', 'B', 1, 7);
INSERT INTO tt VALUES ('ID2', 'A', 2, 6);
INSERT INTO tt VALUES ('ID2', 'B', 2, 7);
INSERT INTO tt VALUES ('ID3', 'A', 3, 6);
INSERT INTO tt VALUES ('ID3', 'B', 3, 7);
INSERT INTO tt VALUES ('ID3', 'C', 3, 8);
SELECT ID, CASE WHEN sub_id = 'A' THEN SUM(y)
WHEN sub_id = 'B' THEN SUM(x)
ELSE (x + y) END tst
FROM tt
GROUP BY ID
ORA-00979: not a GROUP BY expression (points at sub_id in WHEN)
SELECT ID, CASE WHEN sub_id = 'A' THEN SUM(y)
WHEN sub_id = 'B' THEN SUM(x)
ELSE (x + y) END tst
FROM tt
GROUP BY ID, sub_id
ORA-00979: not a GROUP BY expression (points at x in ELSE)
SQL> SELECT ID, CASE WHEN sub_id = 'A' THEN SUM(y)
2 WHEN sub_id = 'B' THEN SUM(x)
3 ELSE SUM(x + y) END tst
4 FROM tt
5 GROUP BY ID, sub_id;
ID TST
-------------------------------- ----------
ID1 6
ID3 6
ID3 3
ID1 1
ID2 6
ID2 2
ID3 11
Hi there I am trying to execute a query but cannot seem to get it right.
SELECT *
FROM table
WHERE id IN (SELECT *
FROM table
WHERE description = 'A')
AND description = 'B'
Above is the query that I have got, the select * from table where description = A works as expected when ran alone I just need to make the where clause to work so I can see any id that has a description of A and B.
You will be getting multiple columns from the sub query when I assume you only want the id column:
SELECT *
FROM table
WHERE id IN (SELECT id
FROM table
WHERE description = 'A')
AND description = 'B'
No need for the select in the where clause
SELECT *
FROM table
WHERE id IN ('A', 'B')
Try this:
SELECT *
FROM table
WHERE description IN ('A', 'B')
it should be:
select * from table where id in (select id from table where description = 'A') and description = 'B'
but this query will give you zero result as you select records with description = 'A' and description = 'B', if you want to get records with either description of A or B, then you should write as
select * from table where description = 'A' or description = 'B'
or
select * from table where description in ('A','B')
SELECT distinct AnaTablo.Id , AnaTablo.FirmaAdi , AnaTablo.FirmaId , AnaTablo.KayitTarihi ,
users.Email Personel, (SELECT top 1 sabitler.Ayar from tblSabitAyarlar sabitler WHERE sabitler.Tur = 29 and sabitler.Deger in
(SELECT top 1 IslemId from tblEFaturaTakipIslem Islem WHERE AnaTablo.Id = Islem.EFaturaTakipId order by KayitTarihi desc))YapilanIslem,
AnaTablo.Eposta , AnaTablo.Aciklama
from tblEFaturaTakip AnaTablo left join AspNetUsers users on AnaTablo.PersonelId = users.Id